moxbox init

apps/aria2/config/aria2.conf

@@ -0,0 +1,63 @@
+#用户名
+#rpc-user=user
+#密码
+#rpc-passwd=passwd
+#设置加密的密钥
+#rpc-secret=secret
+#允许rpc
+enable-rpc=true
+#允许所有来源, web界面跨域权限需要
+rpc-allow-origin-all=true
+#是否启用https加密，启用之后要设置公钥,私钥的文件路径
+#rpc-secure=true
+#启用加密设置公钥
+#rpc-certificate=/home/name/.config/aria2/example.crt
+#启用加密设置私钥
+#rpc-private-key=/home/name/.config/aria2/example.key
+#允许外部访问，false的话只监听本地端口
+rpc-listen-all=true
+#RPC端口, 仅当默认端口被占用时修改
+rpc-listen-port=6800
+#最大同时下载数(任务数), 路由建议值: 3
+max-concurrent-downloads=5
+#断点续传
+continue=true
+#同服务器连接数
+max-connection-per-server=5
+#最小文件分片大小, 下载线程数上限取决于能分出多少片, 对于小文件重要
+min-split-size=10M
+#单文件最大线程数, 路由建议值: 5
+split=10
+#下载速度限制
+max-overall-download-limit=0
+#单文件速度限制
+max-download-limit=0
+#上传速度限制
+max-overall-upload-limit=0
+#单文件速度限制
+max-upload-limit=0
+#断开速度过慢的连接
+#lowest-speed-limit=0
+#验证用，需要1.16.1之后的release版本
+#referer=*
+#文件保存路径, 默认为当前启动位置
+dir=/extdisks/sda1/下载
+#IPv4 DHT routing table file to PATH(IPV6默认没有打开的)
+#dht-file-path=/extdisks/sda1/下载/.aria2/dht.dat
+#dht-file-path6=/extdisks/sda1/下载/.aria2/dht6.dat
+#bt-tracker
+#bt-tracker=
+#文件缓存, 使用内置的文件缓存, 如果你不相信Linux内核文件缓存和磁盘内置缓存时使用, 需要1.16及以上版本
+#disk-cache=0
+#另一种Linux文件缓存方式, 使用前确保您使用的内核支持此选项, 需要1.15及以上版本(?)
+#enable-mmap=true
+#文件预分配, 能有效降低文件碎片, 提高磁盘性能. 缺点是预分配时间较长
+#所需时间 none < falloc ? trunc << prealloc, falloc和trunc需要文件系统和内核支持
+file-allocation=prealloc
+#不进行证书校验
+check-certificate=false
+#保存aria2下载记录
+input-file=/etc/aria2.session
+save-session=/etc/aria2.session
+save-session-interval=60
+log-level=warn

apps/aria2/config/aria2.uci

@@ -0,0 +1,7 @@
+service="Aria2"
+appname="aria2"
+needver="0.0.1"
+supports="linux_arm,linux_mips,linux_x86_64"
+appinfo="Linux下一款高效的下载工具"
+newinfo="支持x86_64设备"
+version="0.0.5"

apps/aria2/config/mixbox.conf

@@ -0,0 +1,33 @@
+#------------------【Aria2】--------------------
+aria2() {
+	eval `mbdb export aria2`
+	source /etc/mixbox/bin/base
+	echo "********* $service ***********"
+	echo "[Linux下一款高效的下载工具]"
+	readsh "启动${appname}服务[1/0] " "enable" "1"
+	if [ "$enable" == '1' ]; then
+		read -p "修改${appname}端口号(`mbdb get ${appname}.main.port || echo 6800`)？[1/0] " res
+		if [ "$res" == '1' ]; then
+			read -p "请输入${appname}端口号(默认6800)：" res
+			mbdb set $appname.main.port="$res"
+		fi
+		token=$(mbdb get ${appname}.main.token)
+		path=$(mbdb get ${appname}.main.path)
+		[ -z $token ] && token="空"
+		[ -z $path ] && path="$mbdisk/下载"
+		read -p "修改${appname}配置($token, $path)？[1/0] " res
+		if [ "$res" == '1' ]; then
+			read -p "请输入${appname}密钥(回车表示不设置)：" res
+			[ ! -z "$res" ] && mbdb set $appname.main.token="$res" || mbdb set $appname.main.token=""
+			read -p "请输入${appname}下载路径(回车默认$mbdisk/下载)：" res
+			[ ! -z "$res" ] && mbdb set $appname.main.path="$res" || mbdb set $appname.main.path="$mbdisk/下载"
+		fi
+		readsh "请输入${appname}外网访问配置[1/0]" "openport" "1"
+		
+		${mbroot}/apps/${appname}/scripts/${appname}.sh restart
+	else
+		${mbroot}/apps/${appname}/scripts/${appname}.sh stop
+	fi
+	
+}
+#------------------【Aria2】--------------------

apps/aria2/scripts/aria2.sh

@@ -0,0 +1,129 @@
+#!/bin/sh 
+source /etc/mixbox/bin/base
+eval `mbdb export aria2`
+
+port=6800
+WEBDIR=${mbroot}/apps/${appname}/web
+[ -z "${port}" ] && port=6800
+[ -z "$path" ] && path="$mbdisk/下载"
+aria2url=http://$lanip/backup/log/${appname}
+binname=aria2c
+
+open_ports() {
+    # 添加bt下载和DHT监听端口
+    open_port 6881:6999 tcp
+}
+
+set_config() {
+
+	logsh "【$service】" "加载${appname}配置..."
+	[ ! -f /etc/aria2.session ] && touch /etc/aria2.session
+
+	[ ! -z "${port}" ] && sed -i "s/^.*rpc-listen-port.*$/rpc-listen-port=${port}/" ${mbroot}/apps/${appname}/config/${appname}.conf
+
+	if [ ! -z "$token" ]; then
+		sed -i "s/^.*rpc-secret.*$/rpc-secret=$token/" ${mbroot}/apps/${appname}/config/${appname}.conf
+	else
+		sed -i "s/^.*rpc-secret.*$/#rpc-secret=/" ${mbroot}/apps/${appname}/config/${appname}.conf
+	fi
+
+	sed -i "s#dir.*#dir=$path#" ${mbroot}/apps/${appname}/config/${appname}.conf
+
+	[ ! -d "$path" ] && mkdir -p $path
+
+    # DHT 缓存目录配置
+    if [ ! -d "${path}/.aria2" ]; then
+        mkdir -p "${path}/.aria2"
+        # IPV6默认没有开，可以不用配置
+        sed -i "s#.*dht-file-path.*#dht-file-path=${path}/.aria2/dht.dat#" ${mbroot}/apps/${appname}/config/${appname}.conf
+        sed -i "s#.*dht-file-path6.*#dht-file-path6=${path}/.aria2/dht6.dat#" ${mbroot}/apps/${appname}/config/${appname}.conf
+    fi
+
+    # 自动更新bt-tracker
+    list=`curl -s https://raw.githubusercontent.com/ngosang/trackerslist/master/trackers_best.txt|awk NF|sed ":a;N;s/\n/,/g;ta"`
+    if [ ! -z "${list}" ]; then
+        sed -i "s#.*bt-tracker.*#bt-tracker=${list}#" ${mbroot}/apps/${appname}/config/${appname}.conf
+        logsh "【$service】" "更新bt-tracker"
+    fi
+
+	#R3加载库文件
+	[ "$xq" == "R3" -o "$xq" == "R1CM" ] && export LD_LIBRARY_PATH=${mbroot}/apps/${appname}/lib:/usr/lib:/lib
+
+	if [ ! -d /tmp/syslogbackup/${appname} ] && [ -n "$xq" ]; then
+		logsh "【$service】" "生成${appname}本地web页面"
+		mkdir -p /tmp/syslogbackup &> /dev/null
+		ln -s $WEBDIR/AriaNG /tmp/syslogbackup/${appname} > /dev/null 2>&1
+	fi
+	#添加定时重启任务
+	cru a ${appname} "0 6 * * * ${mbroot}/apps/${appname}/scripts/${appname}.sh restart"
+
+}
+
+start () {
+
+	result=$(ps | grep ${mbroot}/apps/${appname}/bin/${appname} | grep -v grep | wc -l)
+    	if [ "$result" != '0' ];then
+		logsh "【$service】" "${appname}已经在运行！"
+		exit 1
+	fi
+	logsh "【$service】" "正在启动${appname}服务... "
+
+	set_config
+
+	open_port
+    write_firewall_start
+
+    if [ ! -f ${mbroot}/apps/${appname}/bin/${appname} ]; then
+		bincheck ${binname} 
+    	[ $? -eq 0 ] && ln -sf $(which $binname) ${mbroot}/apps/${appname}/bin/${appname} 
+	fi
+	daemon ${mbroot}/apps/${appname}/bin/${appname} --conf-path=${mbroot}/apps/${appname}/config/${appname}.conf -D -l ${mbroot}/var/log/${appname}.log
+	if [ $? -ne 0 ]; then
+    	logsh "【$service】" "启动${appname}服务失败！"
+    else
+        logsh "【$service】" "启动${appname}服务完成！"
+        logsh "【$service】" "访问[$aria2url]管理服务"
+		[ -z "$token" ] && tokentext="" || tokentext=token:"$token"@
+		logsh "【$service】" "jsonrpc地址:http://"$tokentext""$lanip":"${port}"/jsonrpc"
+    fi
+
+}
+
+stop () {
+
+	logsh "【$service】" "正在停止${appname}服务... "
+	close_port
+	remove_firewall_start
+	killall -9 ${appname} &> /dev/null
+	
+	destroy
+}
+
+destroy() {
+	if [ "$enable" == '0' ]; then
+		[ -d /tmp/syslogbackup/${appname} ] && rm -rf /tmp/syslogbackup/${appname}
+		cru d ${appname}
+	fi
+}
+
+
+status() {
+
+	result=$(pssh | grep ${mbroot}/apps/${appname}/bin/${appname} | grep -v grep | wc -l)
+	if [ "$result" == '0' ]; then
+		status="未运行|0"
+	else
+		status="运行端口号: ${port}|1"
+	fi
+	mbdb set $appname.main.status="$status" 
+
+}
+
+case "$1" in
+    start) start ;;
+    stop) stop ;;
+    restart) stop; start ;;
+    reload) close_port && open_port ;;
+    status) status ;;
+esac
+

apps/aria2/scripts/install.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+#copyright by monlor
+source /etc/mixbox/bin/base
+
+appname=aria2
+[ "$xq" != "R3" -a "$xq" != "R1CM" ] && rm -rf ${mbtmp}/${appname}/lib