diff --git a/scripts/clash.service b/scripts/clash.service
deleted file mode 100644
index 32bc66c..0000000
--- a/scripts/clash.service
+++ /dev/null
@@ -1,17 +0,0 @@
-[Unit]
-Description=clash
-After=network.target
-
-[Service]
-Type=simple
-User=root
-ExecStartPre=/etc/clash/start.sh bfstart
-ExecStart=/etc/clash/clash -d /etc/clash >/dev/null
-ExecStartPost=/etc/clash/start.sh afstart
-Restart=on-failure
-RestartSec=3s
-LimitNOFILE=999999
-
-
-[Install]
-WantedBy=multi-user.target
diff --git a/scripts/clashservice b/scripts/clashservice
deleted file mode 100644
index 51e4d4d..0000000
--- a/scripts/clashservice
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-SERVICE_DAEMONIZE=1
-SERVICE_WRITE_PID=1
-USE_PROCD=1
-#获取目录
-DIR=$(cat /etc/profile | grep CRASHDIR | awk -F "\"" '{print $2}')
-[ -z "$DIR" ] && DIR=$(cat ~/.bashrc | grep CRASHDIR | awk -F "\"" '{print $2}')
-BINDIR=$(cat $DIR/configs/ShellCrash.cfg | grep bindir | awk -F "=" '{print $2}')
-[ -z "$BINDIR" ] && BINDIR=$DIR
-
-start_service() {
-	#检测必须文件
-	$DIR/start.sh bfstart
-	if [ "$?" = "0" ];then
-		#使用procd创建clash后台进程
-		procd_open_instance
-		procd_set_param respawn
-		procd_set_param stderr 0
-		procd_set_param stdout 0
-		procd_set_param command $BINDIR/clash -d $BINDIR
-		procd_close_instance
-		#其他设置
-		$DIR/start.sh afstart
-	fi
-}
-
-start() {
-	if [ -z "$(pidof procd)" ];then
-		#检测必须文件
-		$DIR/start.sh bfstart
-		if [ "$?" = "0" ];then
-			#创建后台进程
-			service_start  $BINDIR/clash -d $BINDIR
-			#其他设置
-			$DIR/start.sh afstart
-			#设置守护进程
-			$DIR/start.sh daemon
-		fi
-	else
-		start_service
-	fi
-}
diff --git a/scripts/getdate.sh b/scripts/getdate.sh
index b83e46b..1345213 100644
--- a/scripts/getdate.sh
+++ b/scripts/getdate.sh
@@ -548,7 +548,7 @@ override(){
 	case "$num" in
 	1)
 		source $CFG_PATH
-		if [ -n "$(pidof clash)" ];then
+		if [ -n "$(pidof CrashCore)" ];then
 			echo -----------------------------------------------
 			echo -e "\033[33m检测到服务正在运行，需要先停止服务！\033[0m"
 			read -p "是否停止服务？(1/0) > " res
@@ -807,11 +807,61 @@ setcpucore(){
 		setconfig cpucore $cpucore
 	fi
 }
+setcoretype(){
+	[ "$crashcore" = singbox ] && core_old=singbox || core_old=clash
+	echo -e "\033[33m请确认该自定义内核的类型：\033[0m"
+	echo -e " 1 Clash基础内核"
+	echo -e " 2 Clash-Premium内核"
+	echo -e " 3 Clash-Meta内核"
+	echo -e " 4 Sing-Box内核"
+	read -p "请输入对应数字 > " num
+	case "$num" in
+		2) crashcore=clashpre ;;
+		3) crashcore=meta ;;
+		4) crashcore=singbox ;;
+		*) crashcore=clash ;;
+	esac
+	[ "$crashcore" = singbox ] && core_new=singbox || core_new=clash
+}
+switch_core(){
+	#singbox和clash内核切换时提示是否保留文件
+	[ "$core_new" != "$core_old" ] && {
+		echo -e "\033[33m已从$core_old内核切换至$core_new内核\033[0m"
+		echo -e "\033[33m二者Geo数据库及yaml/json配置文件不通用\033[0m"
+		read -p "是否保留相关数据库文件？(1/0) > " res
+		[ "$res" = '0' ] && [ "$core_old" = "clash" ] && {
+			 rm -rf $CRASHDIR/Country.mmdb
+			 rm -rf $CRASHDIR/GeoSite.dat
+			 setconfig Country_v
+			 setconfig cn_mini_v
+			 setconfig geosite_v
+		}
+		[ "$res" = '0' ] && [ "$core_old" = "singbox" ] && {
+			 rm -rf $CRASHDIR/geoip.db
+			 rm -rf $CRASHDIR/geosite.db
+			 setconfig geoip_cn_v
+			 setconfig geosite_cn_v
+		}
+		read -p "是否保留$core_old相关配置文件？(1/0) > " res
+		[ "$res" = '0' ] && [ "$core_old" = "clash" ] && rm -rf $CRASHDIR/yamls
+		[ "$res" = '0' ] && [ "$core_old" = "singbox" ] && rm -rf $CRASHDIR/jsons			
+	}
+	if [ "$crashcore" = singbox ];then
+		COMMAND="$bindir/CrashCore run -D $bindir -c $TMPDIR/config.json >/dev/null"
+		COMMAND_T="$bindir/CrashCore check -D $bindir -c $TMPDIR/config.json"
+	else
+		COMMAND="$bindir/CrashCore -d $bindir -f $TMPDIR/config.yaml >/dev/null"
+		COMMAND_T="$bindir/CrashCore -t -d $bindir -f $TMPDIR/config.yaml"
+	fi
+	setconfig COMMAND $COMMAND $CRASHDIR/configs/service.env
+	setconfig COMMAND_T $COMMAND_T $CRASHDIR/configs/service.env
+}
 getcore(){
 	[ -z "$crashcore" ] && crashcore=clashpre
 	[ -z "$cpucore" ] && getcpucore
+	[ "$crashcore" = singbox ] && core_new=singbox || core_new=clash
 	#生成链接
-	[ -z "$custcorelink" ] && corelink="$update_url/bin/$crashcore/clash-linux-$cpucore" || corelink="$custcorelink"
+	[ -z "$custcorelink" ] && corelink="${update_url}/bin/${crashcore}/${core_new}-linux-${cpucore}" || corelink="$custcorelink"
 	#获取在线内核文件
 	echo -----------------------------------------------
 	echo 正在在线获取$crashcore核心文件……
@@ -820,9 +870,10 @@ getcore(){
 		echo -e "\033[31m核心文件下载失败！\033[0m"
 		rm -rf $TMPDIR/core.new
 		[ -z "$custcorelink" ] && error_down
-	else=
+	else
 		chmod +x $TMPDIR/core.new 
 		$CRASHDIR/start.sh stop
+		[ "$crashcore" = unknow ] && setcoretype
 		if [ "$crashcore" = singbox ];then
 			core_v=$($TMPDIR/core.new version 2>/dev/null | grep version | awk '{print $3}')
 		else
@@ -837,6 +888,8 @@ getcore(){
 			mv -f $TMPDIR/core.new $bindir/CrashCore
 			chmod +x $bindir/CrashCore
 			setconfig crashcore $crashcore
+			setconfig core_v $core_v
+			switch_core
 		fi
 	fi
 }
@@ -876,7 +929,7 @@ setcustcore(){
 		4)
 			read -p "请输入自定义内核的链接地址(必须是二进制文件) > " link
 			[ -n "$link" ] && custcorelink="$link"
-			crashcore=meta
+			crashcore=unknow
 			getcore
 		;;
 		*)
@@ -887,11 +940,13 @@ setcustcore(){
 }
 setcore(){
 	#获取核心及版本信息
+	[ -z "$crashcore" ] && crashcore="unknow" 
 	[ ! -f $CRASHDIR/CrashCore ] && crashcore="未安装核心"
+	[ "$crashcore" = singbox ] && core_old=singbox || core_old=clash
 	###
 	echo -----------------------------------------------
 	[ -z "$cpucore" ] && getcpucore
-	echo -e "当前clash核心：\033[42;30m $crashcore \033[47;30m$clashv\033[0m"
+	echo -e "当前内核：\033[42;30m $crashcore \033[47;30m$core_v\033[0m"
 	echo -e "当前系统处理器架构：\033[32m $cpucore \033[0m"
 	echo -e "\033[33m请选择需要使用的核心版本！\033[0m"
 	echo -----------------------------------------------
@@ -943,9 +998,11 @@ setcore(){
 }
 
 getgeo(){
+	#生成链接
+	[ -z "$custcorelink" ] && geolink="$update_url/bin/geodata/$geotype" || geolink="$custcorelink"
 	echo -----------------------------------------------
 	echo 正在从服务器获取数据库文件…………
-	$CRASHDIR/start.sh webget $TMPDIR/$geoname $update_url/bin/geodata/$geotype
+	$CRASHDIR/start.sh webget $TMPDIR/$geoname $geolink
 	if [ "$?" = "1" ];then
 		echo -----------------------------------------------
 		echo -e "\033[31m文件下载失败！\033[0m"
@@ -964,19 +1021,110 @@ getgeo(){
 	fi
 	sleep 1
 }
+setcustgeo(){
+	checkcustgeo(){
+		echo -e "\033[32m正在查找可更新的数据库文件！\033[0m"
+		$CRASHDIR/start.sh webget $TMPDIR/github_api https://api.github.com/repos/$project/releases/latest
+		cat $TMPDIR/github_api | grep "browser_download_url" | grep -oiE 'geosite.*\.dat"$|country.*\.mmdb"$|geosite.*\.db"$|geoip.*\.db"$' | sed 's/"//' > $TMPDIR/github_api
+		if [ -s $TMPDIR/github_api ];then
+			echo -----------------------------------------------
+			cat $TMPDIR/github_api | awk '{print " "NR" "$3,$2,$4}'
+			echo -e "0 返回上级菜单"
+			echo -----------------------------------------------
+			read -p "请输入对应数字 > " num	
+			case "$num" in
+			0)
+			;;
+			[1-99])
+				if [ "$num" -le "$(wc -l $TMPDIR/github_api)" ];then
+					geotype=$(sed -n "$num"p $TMPDIR/github_api)
+					[ -n "$(echo $geo_api | grep -oiE 'GeoSite.*dat')" ] && geoname=GeoSite.dat
+					[ -n "$(echo $geo_api | grep -oiE 'Country.*mmdb')" ] && geoname=Country.mmdb
+					[ -n "$(echo $geo_api | grep -oiE 'geosite.*db')" ] && geoname=geosite.db
+					[ -n "$(echo $geo_api | grep -oiE 'geoip.*db')" ] && geoname=geoip.db
+					custgeolink=https://raw.githubusercontent.com/$project/release/$geotype
+					getgeo
+				else
+					errornum
+				fi
+			;;
+			*)
+				errornum
+			;;
+			esac
+			rm -rf $TMPDIR/github_api
+		else
+			echo -e "\033[31m查找失败，请检查网络连接！\033[0m"
+			sleep 1
+		fi
+	}
+	echo -----------------------------------------------
+	echo -e "\033[36m自定义数据库需要调用第三方地址，请尽量在服务启动后更新！\033[0m"
+	echo -e "\033[36m自定义数据库不兼容小闪存模式，也不支持自动更新！\033[0m"
+	echo -e "\033[33m继续后如出现任何问题，请务必自行解决，一切提问恕不受理！\033[0m"
+	echo -----------------------------------------------
+	sleep 1
+	read -p "我确认遇到问题可以自行解决[1/0] > " res
+	[ "$res" = '1' ] && {
+		echo -e "\033[33m此处数据库均源自互联网采集，此处致谢各位作者！\033[0m"
+		echo -e "\033[33m请点击或复制链接前往项目页面查看具体说明！\033[0m"
+		echo -e "\033[33m请选择需要更新的数据库项目来源！\033[0m"
+		echo -----------------------------------------------
+		echo -e "1 \033[36;4mhttps://github.com/MetaCubeX/meta-rules-dat\033[0m (Clash及SingBox)"
+		echo -e "2 \033[36;4mhttps://github.com/DustinWin/clash-geosite\033[0m (Clash及SingBox)"
+		echo -e "3 \033[36;4mhttps://github.com/lyc8503/sing-box-rules\033[0m (仅限SingBox)"
+		echo -e "4 \033[36;4mhttps://github.com/Loyalsoldier/geoip\033[0m (仅限Clash-GeoIP)"
+		echo -----------------------------------------------
+		echo -e "9 \033[33m 自定义数据库链接 \033[0m"
+		echo -e "0 返回上级菜单"
+		read -p "请输入对应数字 > " num	
+		case "$num" in
+		0)
+		;;
+		1)
+			project=MetaCubeX/meta-rules-dat
+			checkcustgeo		
+		;;
+		2)
+			project=DustinWin/clash-geosite
+			checkcustgeo		
+		;;
+		3)
+			project=lyc8503/sing-box-rules
+			checkcustgeo		
+		;;
+		4)
+			project=Loyalsoldier/geoip
+			checkcustgeo		
+		;;
+		9)
+			read -p "请输入自定义数据库的链接地址 > " link
+			[ -n "$link" ] && custgeolink="$link"
+			getgeo
+		;;
+		*)
+			errornum
+		;;
+		esac
+	}
+}
 setgeo(){
 	source $CFG_PATH > /dev/null
 	[ -n "$cn_mini.mmdb_v" ] && geo_type_des=精简版 || geo_type_des=全球版 
 	echo -----------------------------------------------
-	echo -e "\033[36m请选择需要更新的GeoIP/CN_IP数据库：\033[0m"
+	echo -e "\033[36m请选择需要更新的Geo/CN数据库文件：\033[0m"
 	echo -e "\033[36m全球版GeoIP和精简版CN-IP数据库不共存\033[0m"
+	echo -e "\033[36mClash内核和SingBox内核的数据库文件不通用\033[0m"
 	echo -e "在线数据库最新版本：\033[32m$GeoIP_v\033[0m"
 	echo -----------------------------------------------
-	echo -e " 1 全球版GeoIP数据库(约6mb)	\033[33m$Country_v\033[0m"
-	echo -e " 2 精简版CN-IP数据库(约0.2mb)	\033[33m$cn_mini_v\033[0m"
-	echo -e " 3 CN-IP绕过文件(约0.2mb)	\033[33m$china_ip_list_v\033[0m"
-	echo -e " 4 CN-IPV6绕过文件(约50kb)	\033[33m$china_ipv6_list_v\033[0m"
-	echo -e " 5 GeoSite数据库(约4.5mb)	\033[33m$geosite_v\033[0m"
+	echo -e " 1 CN-IP绕过文件(约0.1mb)	\033[33m$china_ip_list_v\033[0m"
+	echo -e " 2 CN-IPV6绕过文件(约30kb)	\033[33m$china_ipv6_list_v\033[0m"
+	echo -e " 3 Clash全球版GeoIP数据库(约6mb)	\033[33m$Country_v\033[0m"
+	echo -e " 4 Clash精简版GeoIP_cn数据库(约0.1mb)	\033[33m$cn_mini_v\033[0m"
+	echo -e " 5 Meta完整版GeoSite数据库(约5mb)	\033[33m$geosite_v\033[0m"
+	echo -e " 6 SingBox精简版GeoIP_cn数据库(约0.3mb)	\033[33m$Country_v\033[0m"
+	echo -e " 7 SingBox精简版GeoSite数据库(约0.8mb)	\033[33m$cn_mini_v\033[0m"
+	echo -e " 9 \033[32m自定义数据库\033[0m：	\033[33m仅限专业用户使用\033[0m"
 	echo " 0 返回上级菜单"
 	echo -----------------------------------------------
 	read -p "请输入对应数字 > " num
@@ -984,18 +1132,6 @@ setgeo(){
 	0)
 	;;
 	1)
-		geotype=Country.mmdb
-		geoname=Country.mmdb
-		getgeo
-		setgeo
-	;;
-	2)
-		geotype=cn_mini.mmdb
-		geoname=Country.mmdb
-		getgeo
-		setgeo
-	;;
-	3)
 		if [ "$cn_ip_route" = "已开启" ]; then
 			geotype=china_ip_list.txt
 			geoname=cn_ip.txt
@@ -1007,7 +1143,7 @@ setgeo(){
 		fi
 		setgeo
 	;;
-	4)
+	2)
 		if [ "$cn_ipv6_route" = "已开启" -a "$ipv6_redir" = "已开启" ]; then
 			geotype=china_ipv6_list.txt
 			geoname=cn_ipv6.txt
@@ -1019,6 +1155,30 @@ setgeo(){
 		fi
 		setgeo
 	;;
+	3)
+		if [ "$crashcore" != "singbox" ]; then
+			geotype=Country.mmdb
+			geoname=Country.mmdb
+			getgeo
+		else
+			echo -----------------------------------------------
+			echo -e "\033[31m当前未使用clash内核，无需使用此数据库！！\033[0m"	
+			sleep 1
+		fi
+		setgeo
+	;;
+	4)
+		if [ "$crashcore" != "singbox" ]; then
+			geotype=cn_mini.mmdb
+			geoname=Country.mmdb
+			getgeo
+		else
+			echo -----------------------------------------------
+			echo -e "\033[31m当前未使用clash内核，无需使用此数据库！！\033[0m"	
+			sleep 1
+		fi
+		setgeo
+	;;
 	5)
 		if [ "$crashcore" = "meta" ]; then
 			geotype=geosite.dat
@@ -1026,11 +1186,38 @@ setgeo(){
 			getgeo
 		else
 			echo -----------------------------------------------
-			echo -e "\033[31m当前未使用meta内核，无需更新GeoSite数据库！！\033[0m"	
+			echo -e "\033[31m当前未使用meta内核，无需使用此数据库！！\033[0m"	
 			sleep 1
 		fi
 		setgeo
 	;;
+	6)
+		if [ "$crashcore" = "singbox" ]; then
+			geotype=geoip_cn.db
+			geoname=geoip.db
+			getgeo
+		else
+			echo -----------------------------------------------
+			echo -e "\033[31m当前未使用singbox内核，无需使用此数据库！！\033[0m"	
+			sleep 1
+		fi
+		setgeo
+	;;
+	7)
+		if [ "$crashcore" = "singbox" ]; then
+			geotype=geosite_cn.db
+			geoname=geosite.db
+			getgeo
+		else
+			echo -----------------------------------------------
+			echo -e "\033[31m当前未使用singbox内核，无需使用此数据库！！\033[0m"	
+			sleep 1
+		fi
+		setgeo
+	;;
+	9)
+		setcustgeo
+	;;	
 	*)
 		errornum
 	;;
@@ -1313,8 +1500,7 @@ update(){
 	echo -----------------------------------------------
 	echo -ne "\033[32m正在检查更新！\033[0m\r"
 	checkupdate
-	core_v=$($bindir/clash -v 2>/dev/null | head -n 1 | sed 's/ linux.*//;s/.* //')
-	[ -z "$core_v" ] && core_v=$clashv
+	[ -z "$core_v" ] && core_v=unknow
 	core_v_new=$(eval echo \$${crashcore}_v)
 	echo -e "\033[30;47m欢迎使用更新功能：\033[0m"
 	echo -----------------------------------------------
@@ -1431,7 +1617,7 @@ userguide(){
 			}
 			#设置开机启动
 			[ -f /etc/rc.common ] && /etc/init.d/clash enable
-			ckcmd systemctl && systemctl enable clash.service > /dev/null 2>&1
+			ckcmd systemctl && systemctl enable shellcrash.service > /dev/null 2>&1
 			rm -rf $CRASHDIR/.dis_startup
 			autostart=enable
 			#检测IP转发
@@ -1598,7 +1784,7 @@ testcommand(){
 	elif [ "$num" = 4 ]; then
 
 		if [ -n "$(echo $redir_mod | grep 'Nft')" -o "$local_type" = "nftables增强模式" ];then
-			nft list table inet shellclash
+			nft list table inet shellcrash
 		else
 			echo -------------------Redir---------------------
 			iptables -t nat -L PREROUTING --line-numbers
diff --git a/scripts/init.sh b/scripts/init.sh
index 58b703f..ba86a60 100644
--- a/scripts/init.sh
+++ b/scripts/init.sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # Copyright (C) Juewuy
 
-version=1.8.3d
+version=1.8.3e
 
 setdir(){
 	dir_avail(){
@@ -157,17 +157,17 @@ mkdir -p $CRASHDIR/configs
 #本地安装跳过新手引导
 #[ -z "$url" ] && setconfig userguide 1
 #判断系统类型写入不同的启动文件
-if [ -f /etc/rc.common ];then
+if [ -f /etc/rc.common ] && [ -n "$(pidof procd)" ];then
 		#设为init.d方式启动
-		cp -f $CRASHDIR/clashservice /etc/init.d/clash
-		chmod 755 /etc/init.d/clash
+		cp -f $CRASHDIR/crash.rc /etc/init.d/shellcrash
+		chmod 755 /etc/init.d/shellcrash
 else
 	[ -w /etc/systemd/system ] && sysdir=/etc/systemd/system
 	[ -w /usr/lib/systemd/system ] && sysdir=/usr/lib/systemd/system
 	if [ -n "$sysdir" -a -z "$WSL_DISTRO_NAME" ];then #wsl环境不使用systemd
 		#设为systemd方式启动
-		mv -f $CRASHDIR/clash.service $sysdir/clash.service 2>/dev/null
-		sed -i "s%/etc/clash%$CRASHDIR%g" $sysdir/clash.service
+		mv -f $CRASHDIR/shellcrash.service $sysdir/shellcrash.service 2>/dev/null
+		sed -i "s%/etc/ShellCrash%$CRASHDIR%g" $sysdir/shellcrash.service
 		systemctl daemon-reload
 	else
 		#设为保守模式启动
@@ -188,13 +188,13 @@ setconfig versionsh_l $version
 [ -w /etc/profile ] && profile=/etc/profile
 if [ -n "$profile" ];then
 	sed -i '/alias crash=*/'d $profile
-	echo "alias crash=\"$shtype $CRASHDIR/clash.sh\"" >> $profile #设置快捷命令环境变量
+	echo "alias crash=\"$shtype $CRASHDIR/menu.sh\"" >> $profile #设置快捷命令环境变量
 	sed -i '/export CRASHDIR=*/'d $profile
-	echo "export CRASHDIR=\"$CRASHDIR\"" >> $profile #设置clash路径环境变量
+	echo "export CRASHDIR=\"$CRASHDIR\"" >> $profile #设置路径环境变量
 	source $profile &>/dev/null || echo 运行错误！请使用bash而不是dash运行安装命令！！！
 	#适配zsh环境变量
 	[ -n "$(ls -l /bin/sh|grep -oE 'zsh')" ] && [ -z "$(cat ~/.zshrc 2>/dev/null|grep CRASHDIR)" ] && { 
-		echo "alias crash=\"$shtype $CRASHDIR/clash.sh\"" >> ~/.zshrc
+		echo "alias crash=\"$shtype $CRASHDIR/menu.sh\"" >> ~/.zshrc
 		echo "export CRASHDIR=\"$CRASHDIR\"" >> ~/.zshrc
 		source ~/.zshrc &>/dev/null
 	}
@@ -231,7 +231,7 @@ fi
 	nvram commit
 }
 #删除临时文件
-rm -rf /tmp/*lash*gz
+rm -rf /tmp/*rash*gz
 rm -rf /tmp/SC_tmp
 #转换&清理旧版本文件
 mkdir -p $CRASHDIR/yamls
@@ -256,10 +256,14 @@ for file in cron task.sh task.list;do
 	mv -f $CRASHDIR/$file $CRASHDIR/task/$file 2>/dev/null
 done
 chmod 755 $CRASHDIR/task/task.sh
-for file in log clash.service mark? mark.bak;do
+#旧版文件清理
+rm -rf $sysdir/shellcrash.service
+for file in log shellcrash.service mark? mark.bak;do
 	rm -rf $CRASHDIR/$file
 done
-
+#旧版变量改名
+sed -i "s/clashcore/crashcore/g" $configpath
+sed -i "s/ShellClash/ShellCrash/g" $configpath
 #旧版任务清理
 $CRASHDIR/start.sh cronset "clash服务" 2>/dev/null
 $CRASHDIR/start.sh cronset "订阅链接" 2>/dev/null
diff --git a/scripts/clash.sh b/scripts/menu.sh
similarity index 98%
rename from scripts/clash.sh
rename to scripts/menu.sh
index d432254..792be0c 100644
--- a/scripts/clash.sh
+++ b/scripts/menu.sh
@@ -55,7 +55,7 @@ ckstatus(){
 	if [ -f /etc/rc.common ];then
 		[ -n "$(find /etc/rc.d -name '*clash')" ] && autostart=enable || autostart=disable
 	elif [ -w /etc/systemd/system -o -w /usr/lib/systemd/system ];then
-		[ -n "$(systemctl is-enabled clash.service 2>&1 | grep enable)" ] && autostart=enable || autostart=disable
+		[ -n "$(systemctl is-enabled shellcrash.service 2>&1 | grep enable)" ] && autostart=enable || autostart=disable
 	else
 		[ -f $CRASHDIR/.dis_startup ] && autostart=disable || autostart=enable
 	fi
@@ -68,7 +68,7 @@ ckstatus(){
 		auto1="\033[36m允许\033[0mShellCrash开机启动"
 	fi
 	#获取运行状态
-	PID=$(pidof clash | awk '{print $NF}')
+	PID=$(pidof CrashCore | awk '{print $NF}')
 	if [ -n "$PID" ];then
 		run="\033[32m正在运行（$redir_mod）\033[0m"
 		VmRSS=`cat /proc/$PID/status|grep -w VmRSS|awk '{print $2,$3}'`
@@ -111,17 +111,12 @@ ckstatus(){
 			echo -e "发现可用的内核文件： \033[36m$file\033[0m "
 			read -p "是否加载？(1/0) > " res
 			[ "$res" = 1 ] && {
-				echo -e " 1 Clash内核"
-				echo -e " 2 Clashpre内核"
-				echo -e " 3 Clash.Meta内核"
-				read -p "请手动确定该内核类型 > " num
-				case "$num" in
-					2) crashcore=clashpre ;;
-					3) crashcore=meta ;;
-					*) crashcore=clash ;;
-				esac
-				mv -f $file $bindir/clash && echo -e "\033[32m内核加载完成！\033[0m " && sleep 1
-				setconfig crashcore $crashcore
+				source $CRASHDIR/getdate.sh && setcoretype && \
+				mv -f $file $CRASHDIR/CrashCore && \
+				echo -e "\033[32m内核加载完成！\033[0m " && \
+				setconfig crashcore $crashcore && \
+				switch_core
+				sleep 1
 			}
 		else
 			echo -e "\033[33m检测到不可用的内核文件！可能是文件受损或CPU架构不匹配！\033[0m"
@@ -180,7 +175,7 @@ clashstart(){
 	if [ -s $CRASHDIR/yamls/config.yaml -o -n "$Url" -o -n "$Https" ];then
 		$CRASHDIR/start.sh start
 		sleep 1
-		[ -n "$(pidof clash)" ] && startover
+		[ -n "$(pidof CrashCore)" ] && startover
 	else
 		echo -e "\033[31m没有找到配置文件，请先导入配置文件！\033[0m"
 		source $CRASHDIR/getdate.sh && clashlink
@@ -903,7 +898,7 @@ macfilter(){
 	fi
 }
 localproxy(){
-	[ -w /etc/systemd/system/clash.service -o -w /usr/lib/systemd/system/clash.service -o -x /bin/su ] && local_enh=1
+	[ -w /etc/systemd/system/shellcrash.service -o -w /usr/lib/systemd/system/shellcrash.service -o -x /bin/su ] && local_enh=1
 	[ -f /etc/rc.common -a -w /etc/passwd ] && local_enh=1
 	echo -----------------------------------------------
 	[ -n "$local_enh" ] && {
@@ -964,13 +959,13 @@ setboot(){
 	1)	
 		if [ "$autostart" = "enable" ]; then
 			[ -d /etc/rc.d ] && cd /etc/rc.d && rm -rf *clash > /dev/null 2>&1 && cd - >/dev/null
-			ckcmd systemctl && systemctl disable clash.service > /dev/null 2>&1
+			ckcmd systemctl && systemctl disable shellcrash.service > /dev/null 2>&1
 			touch $CRASHDIR/.dis_startup
 			autostart=disable
 			echo -e "\033[33m已禁止Clash开机启动！\033[0m"
 		elif [ "$autostart" = "disable" ]; then
 			[ -f /etc/rc.common ] && /etc/init.d/clash enable
-			ckcmd systemctl && systemctl enable clash.service > /dev/null 2>&1
+			ckcmd systemctl && systemctl enable shellcrash.service > /dev/null 2>&1
 			rm -rf $CRASHDIR/.dis_startup
 			autostart=enable
 			echo -e "\033[32m已设置Clash开机启动！\033[0m"
@@ -984,7 +979,7 @@ setboot(){
 			setconfig start_old $start_old
 			$CRASHDIR/start.sh stop
 		else
-			if [ -f /etc/init.d/clash -o -w /etc/systemd/system -o -w /usr/lib/systemd/system ];then
+			if [ -n "$(pidof procd)" -o -w /etc/systemd/system -o -w /usr/lib/systemd/system ];then
 				echo -e "\033[32m改为使用系统守护进程启动服务！！\033[0m"
 				$CRASHDIR/start.sh cronset "ShellCrash初始化"
 				start_old=未开启
@@ -1338,7 +1333,7 @@ clashcfg(){
 			setconfig common_ports $common_ports
 		}
 		echo -----------------------------------------------
-		if [ -n "$(pidof clash)" ];then
+		if [ -n "$(pidof CrashCore)" ];then
 			read -p "切换时将停止服务，是否继续？(1/0) > " res
 			[ "$res" = 1 ] && $CRASHDIR/start.sh stop && set_common_ports
 		else
@@ -1362,7 +1357,7 @@ clashcfg(){
 			local_proxy=未开启
 			setconfig local_proxy $local_proxy
 			setconfig local_type
-			sed -i '/user shellclash/d' /etc/init.d/clash 2>/dev/null
+			sed -i '/user shellcrash/d' /etc/init.d/clash 2>/dev/null
 			echo -e "\033[33m已经停用本机代理规则,请尽快重启服务！！\033[0m"
 		fi
 		sleep 1
@@ -1834,7 +1829,7 @@ case "$1" in
 	;;
 	-t)
 		shtype=sh && [ -n "$(ls -l /bin/sh|grep -o dash)" ] && shtype=bash
-		$shtype -x $CRASHDIR/clash.sh
+		$shtype -x $CRASHDIR/menu.sh
 	;;
 	-s)
 		$CRASHDIR/start.sh $2 $3 $4 $5 $6
@@ -1876,12 +1871,12 @@ case "$1" in
 			sed -i '/ShellCrash初始化/'d /jffs/.asusrouter 2>/dev/null
 			rm -rf $bindir 
 			rm -rf /etc/init.d/clash
-			rm -rf /etc/systemd/system/clash.service
-			rm -rf /usr/lib/systemd/system/clash.service
+			rm -rf /etc/systemd/system/shellcrash.service
+			rm -rf /usr/lib/systemd/system/shellcrash.service
 			rm -rf /www/clash
 			rm -rf /tmp/clash_$USER
 			sed -Ei s/0:7890/7890:7890/g /etc/passwd
-			userdel -r shellclash 2>/dev/null
+			userdel -r shellcrash 2>/dev/null
 			nvram set script_usbmount="" 2>/dev/null
 			nvram commit 2>/dev/null
 			uci delete firewall.ShellClash 2>/dev/null
diff --git a/scripts/misnap_init.sh b/scripts/misnap_init.sh
index 5d0272e..a50be7e 100644
--- a/scripts/misnap_init.sh
+++ b/scripts/misnap_init.sh
@@ -52,13 +52,13 @@ init(){
 	#初始化环境变量
 	sed -i "/alias crash/d" $profile
 	sed -i "/export CRASHDIR/d" $profile
-	echo "alias crash=\"$CRASHDIR/clash.sh\"" >>$profile
+	echo "alias crash=\"$CRASHDIR/menu.sh\"" >>$profile
 	echo "export CRASHDIR=\"$CRASHDIR\"" >>$profile
 	#软固化功能
 	autoSSH
 	#设置init.d服务
-	cp -f $CRASHDIR/clashservice /etc/init.d/clash
-	chmod 755 /etc/init.d/clash
+	cp -f $CRASHDIR/shellcrash.rc /etc/init.d/shellcrash
+	chmod 755 /etc/init.d/shellcrash
 	#启动服务
 	if [ ! -f $CRASHDIR/.dis_startup ]; then
 		#AX6S/AX6000修复tun功能
@@ -66,8 +66,8 @@ init(){
 		#小米7000/小米万兆修复tproxy
 		[ -f /etc/init.d/qca-nss-ecm ] && [ -n "$(grep 'redir_mod=Tproxy' $CRASHDIR/configs/ShellCrash.cfg )" ] && tproxyfix
 		#启动服务
-		/etc/init.d/clash start
-		/etc/init.d/clash enable
+		/etc/init.d/shellcrash start
+		/etc/init.d/shellcrash enable
 	fi
 }
 
@@ -76,7 +76,7 @@ case "$1" in
 	tproxyfix) tproxyfix ;;
 	init) init ;;
 	*)
-		if [ -z $(pidof clash) ];then
+		if [ -z $(pidof CrashCore) ];then
 			init &
 		fi
 	;;
diff --git a/scripts/shellcrash.rc b/scripts/shellcrash.rc
new file mode 100644
index 0000000..554c97f
--- /dev/null
+++ b/scripts/shellcrash.rc
@@ -0,0 +1,30 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+SERVICE_DAEMONIZE=1
+SERVICE_WRITE_PID=1
+USE_PROCD=1
+#获取目录
+CRASHDIR=$(cat /etc/profile | grep CRASHDIR | awk -F "\"" '{print $2}')
+[ -z "$CRASHDIR" ] && CRASHDIR=$(cat ~/.bashrc | grep CRASHDIR | awk -F "\"" '{print $2}')
+BINDIR=$(cat $DIR/configs/ShellCrash.cfg | grep bindir | awk -F "=" '{print $2}')
+[ -z "$BINDIR" ] && BINDIR=$DIR
+source $DIR/configs/service.env
+
+start_service() {
+	#检测必须文件
+	$CRASHDIR/start.sh bfstart
+	if [ "$?" = "0" ];then
+		#使用procd创建clash后台进程
+		procd_open_instance
+		procd_set_param respawn
+		procd_set_param stderr 0
+		procd_set_param stdout 0
+		procd_set_param command $COMMAND
+		procd_close_instance
+		#其他设置
+		$CRASHDIR/start.sh afstart
+	fi
+}
+
diff --git a/scripts/shellcrash.service b/scripts/shellcrash.service
new file mode 100644
index 0000000..ce06522
--- /dev/null
+++ b/scripts/shellcrash.service
@@ -0,0 +1,20 @@
+[Unit]
+Description=ShellCrash Core
+After=network.target
+
+[Service]
+Type=simple
+User=root
+CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE CAP_SYS_PTRACE CAP_DAC_READ_SEARCH
+AmbientCapabilities=CAP_NET_ADMIN CAP_NET_BIND_SERVICE CAP_SYS_PTRACE CAP_DAC_READ_SEARCH
+EnvironmentFile=/etc/ShellCrash/configs/systemd.env
+ExecStartPre=$CRASHDIR/start.sh bfstart
+ExecStart=$ExecStart
+ExecStartPost=$CRASHDIR/start.sh afstart
+Restart=on-failure
+RestartSec=5s
+LimitNOFILE=infinity
+
+
+[Install]
+WantedBy=multi-user.target
diff --git a/scripts/start.sh b/scripts/start.sh
index 1983e2d..5159812 100644
--- a/scripts/start.sh
+++ b/scripts/start.sh
@@ -33,8 +33,12 @@ getconfig(){
 	[ -z "$common_ports" ] && common_ports=已开启
 	[ -z "$multiport" ] && multiport='22,53,80,123,143,194,443,465,587,853,993,995,5222,8080,8443'
 	[ "$common_ports" = "已开启" ] && ports="-m multiport --dports $multiport"
-	#yaml
-	[ -z "$yaml" ] && yaml=$CRASHDIR/yamls/config.yaml
+	#内核配置文件
+	[ -z "$core_config" ] && if [ "$crashcore" = singbox ];then
+		core_config=$CRASHDIR/jsons/config.json
+	else
+		core_config=$CRASHDIR/yamls/config.yaml
+	fi
 }
 setconfig(){
 	#参数1代表变量名，参数2代表变量值,参数3即文件路径
@@ -62,7 +66,7 @@ logger(){
 	[ -z "$3" ] && {
 		getconfig
 		[ -n "$device_name" ] && log_text="$log_text($device_name)"
-		[ -n "$(pidof clash)" ] && {
+		[ -n "$(pidof CrashCore)" ] && {
 			[ -n "$authentication" ] && auth="$authentication@" 
 			export https_proxy="http://${auth}127.0.0.1:$mix_port"
 		}
@@ -160,7 +164,68 @@ getlanip(){
 	reserve_ipv6="::/128 ::1/128 ::ffff:0:0/96 64:ff9b::/96 100::/64 2001::/32 2001:20::/28 2001:db8::/32 2002::/16 fc00::/7 fe80::/10 ff00::/8"
 }
 #配置文件相关
-getyaml(){
+check_clash_config(){
+	#检测节点或providers
+	if [ -z "$(cat $core_config_new | grep -E 'server|proxy-providers' | grep -v 'nameserver' | head -n 1)" ];then
+		echo -----------------------------------------------
+		logger "获取到了配置文件，但似乎并不包含正确的节点信息！" 31
+		echo -----------------------------------------------
+		sed -n '1,30p' $core_config_new
+		echo -----------------------------------------------
+		echo -e "\033[33m请检查如上配置文件信息:\033[0m"
+		echo -----------------------------------------------
+		exit 1
+	fi
+	#检测旧格式
+	if cat $core_config_new | grep 'Proxy Group:' >/dev/null;then
+		echo -----------------------------------------------
+		logger "已经停止对旧格式配置文件的支持！！！" 31
+		echo -e "请使用新格式或者使用【在线生成配置文件】功能！"
+		echo -----------------------------------------------
+		exit 1
+	fi
+	#检测不支持的加密协议
+	if cat $core_config_new | grep 'cipher: chacha20,' >/dev/null;then
+		echo -----------------------------------------------
+		logger "已停止支持chacha20加密，请更换更安全的节点加密协议！" 31
+		echo -----------------------------------------------
+		exit 1
+	fi
+	#检测并去除无效节点组
+	[ -n "$url_type" ] && ckcmd xargs && {
+		cat $core_config_new | sed '/^rules:/,$d' | grep -A 15 "\- name:" | xargs | sed 's/- name: /\n/g' | sed 's/ type: .*proxies: /#/g' | sed 's/- //g' | grep -E '#DIRECT $|#DIRECT$' | awk -F '#' '{print $1}' > $TMPDIR/clash_proxies_$USER
+		while read line ;do
+			sed -i "/- $line/d" $core_config_new
+			sed -i "/- name: $line/,/- DIRECT/d" $core_config_new
+		done < $TMPDIR/clash_proxies_$USER
+		rm -rf $TMPDIR/clash_proxies_$USER
+	}
+	#使用核心内置test功能检测
+	if [ -x $bindir/clash ];then
+		$bindir/clash -t -d $bindir -f $core_config_new >/dev/null
+		if [ "$?" != "0" ];then
+			logger "配置文件加载失败！请查看报错信息！" 31
+			$bindir/clash -t -d $bindir -f $core_config_new
+			echo "$($bindir/clash -t -d $bindir -f $core_config_new)" >> $TMPDIR/ShellCrash.log
+			exit 1
+		fi
+	fi
+}
+check_singbox_config(){
+	#使用核心内置format功能检测并格式化
+	if [ -x $bindir/singbox ];then
+		$bindir/singbox format -c $core_config_new > $TMPDIR/format.json
+		if [ "$?" != "0" ];then
+			logger "配置文件加载失败！请查看报错信息！" 31
+			$bindir/singbox check -c $core_config_new
+			echo "$($bindir/singbox check -c $core_config_new)" >> $TMPDIR/ShellCrash.log
+			exit 1
+		else
+			mv -f $TMPDIR/format.json $core_config_new
+		fi
+	fi
+}
+get_core_config(){
 	[ -z "$rule_link" ] && rule_link=1
 	[ -z "$server_link" ] && server_link=1
 	Server=$(grep -aE '^3|^4' $CRASHDIR/configs/servers.list | sed -n ""$server_link"p" | awk '{print $3}')
@@ -169,18 +234,25 @@ getyaml(){
 	Config=$(grep -aE '^5' $CRASHDIR/configs/servers.list | sed -n ""$rule_link"p" | awk '{print $3}')
 	#如果传来的是Url链接则合成Https链接，否则直接使用Https链接
 	if [ -z "$Https" ];then
-		Https="$Server/sub?target=clash&insert=true&new_name=true&scv=true&udp=true&exclude=$exclude&include=$include&url=$Url&config=$Config"
+		if [ "$crashcore" = singbox ];then
+			target=singbox
+			format=json
+		else
+			target=clash
+			format=yaml
+		fi
+		Https="$Server/sub?target=$target&insert=true&new_name=true&scv=true&udp=true&exclude=$exclude&include=$include&url=$Url&config=$Config"
 		url_type=true
 	fi
 	#输出
 	echo -----------------------------------------------
-	logger 正在连接服务器获取配置文件…………
+	logger 正在连接服务器获取$target配置文件…………
 	echo -e "链接地址为：\033[4;32m$Https\033[0m"
 	echo 可以手动复制该链接到浏览器打开并查看数据是否正常！
-	#获取在线yaml文件
-	yamlnew=$TMPDIR/clash_config_$USER.yaml
-	rm -rf $yamlnew
-	$0 webget $yamlnew $Https
+	#获取在线config文件
+	core_config_new=$TMPDIR/$target_config.$format
+	rm -rf $core_config_new
+	$0 webget $core_config_new $Https
 	if [ "$?" = "1" ];then
 		if [ -z "$url_type" ];then
 			echo -----------------------------------------------
@@ -199,7 +271,7 @@ getyaml(){
 				echo -e "\033[32m如担心数据安全，请在3s内使用【Ctrl+c】退出！\033[0m"
 				sleep 3
 				Https=""
-				getyaml
+				get_core_config
 			else
 				retry=$((retry+1))
 				logger "配置文件获取失败！" 31
@@ -211,62 +283,18 @@ getyaml(){
 				server_link=$((server_link+1))
 				setconfig server_link $server_link
 				Https=""
-				getyaml
+				get_core_config
 			fi
 		fi
 	else
 		Https=""
-		#检测节点或providers
-		if [ -z "$(cat $yamlnew | grep -E 'server|proxy-providers' | grep -v 'nameserver' | head -n 1)" ];then
-			echo -----------------------------------------------
-			logger "获取到了配置文件，但似乎并不包含正确的节点信息！" 31
-			echo -----------------------------------------------
-			sed -n '1,30p' $yamlnew
-			echo -----------------------------------------------
-			echo -e "\033[33m请检查如上配置文件信息:\033[0m"
-			echo -----------------------------------------------
-			exit 1
-		fi
-		#检测旧格式
-		if cat $yamlnew | grep 'Proxy Group:' >/dev/null;then
-			echo -----------------------------------------------
-			logger "已经停止对旧格式配置文件的支持！！！" 31
-			echo -e "请使用新格式或者使用【在线生成配置文件】功能！"
-			echo -----------------------------------------------
-			exit 1
-		fi
-		#检测不支持的加密协议
-		if cat $yamlnew | grep 'cipher: chacha20,' >/dev/null;then
-			echo -----------------------------------------------
-			logger "已停止支持chacha20加密，请更换更安全的节点加密协议！" 31
-			echo -----------------------------------------------
-			exit 1
-		fi
-		#检测并去除无效节点组
-		[ -n "$url_type" ] && ckcmd xargs && {
-			cat $yamlnew | sed '/^rules:/,$d' | grep -A 15 "\- name:" | xargs | sed 's/- name: /\n/g' | sed 's/ type: .*proxies: /#/g' | sed 's/- //g' | grep -E '#DIRECT $|#DIRECT$' | awk -F '#' '{print $1}' > $TMPDIR/clash_proxies_$USER
-			while read line ;do
-				sed -i "/- $line/d" $yamlnew
-				sed -i "/- name: $line/,/- DIRECT/d" $yamlnew
-			done < $TMPDIR/clash_proxies_$USER
-			rm -rf $TMPDIR/clash_proxies_$USER
-		}
-		#使用核心内置test功能检测
-		if [ -x $bindir/clash ];then
-			$bindir/clash -t -d $bindir -f $yamlnew >/dev/null
-			if [ "$?" != "0" ];then
-				logger "配置文件加载失败！请查看报错信息！" 31
-				$bindir/clash -t -d $bindir -f $yamlnew
-				echo "$($bindir/clash -t -d $bindir -f $yamlnew)" >> $TMPDIR/ShellCrash.log
-				exit 1
-			fi
-		fi
+		[ "$crashcore" = singbox ] && check_singbox_config || check_clash_config
 		#如果不同则备份并替换文件
-		if [ -f $yaml ];then
-			compare $yamlnew $yaml
-			[ "$?" = 0 ] || mv -f $yaml $yaml.bak && mv -f $yamlnew $yaml
+		if [ -s $core_config ];then
+			compare $core_config_new $core_config
+			[ "$?" = 0 ] || mv -f $core_config $core_config.bak && mv -f $core_config_new $core_config
 		else
-			mv -f $yamlnew $yaml
+			mv -f $core_config_new $core_config
 		fi
 		echo -e "\033[32m已成功获取配置文件！\033[0m"
 	fi
@@ -280,19 +308,19 @@ modify_yaml(){
 	[ "$ipv6_dns" = "已开启" ] && dns_v6='true' || dns_v6='false'
 	external="external-controller: 0.0.0.0:$db_port"
 	if [ "$redir_mod" = "混合模式" -o "$redir_mod" = "Tun模式" ];then
-		[ "$clashcore" = 'meta' ] && tun_meta=', device: utun, auto-route: false'
+		[ "$crashcore" = 'meta' ] && tun_meta=', device: utun, auto-route: false'
 		tun="tun: {enable: true, stack: system$tun_meta}"
 	else
 		tun='tun: {enable: false}'
 	fi
 	exper='experimental: {ignore-resolve-fail: true, interface-name: en0}'
 	#Meta内核专属配置
-	[ "$clashcore" = 'meta' ] && {
+	[ "$crashcore" = 'meta' ] && {
 		[ "$redir_mod" != "纯净模式" ] && find_process='find-process-mode: "off"'
 	}
 	#dns配置
 	[ -z "$(cat $CRASHDIR/yamls/user.yaml 2>/dev/null | grep '^dns:')" ] && { 
-		[ "$clashcore" = 'meta' ] && dns_default_meta='- https://223.5.5.5/dns-query'
+		[ "$crashcore" = 'meta' ] && dns_default_meta='- https://223.5.5.5/dns-query'
 		cat > $TMPDIR/dns.yaml <<EOF
 dns:
   enable: true
@@ -324,8 +352,8 @@ EOF
 		}		
 }
 	#域名嗅探配置
-	[ "$sniffer" = "已启用" ] && [ "$clashcore" = "meta" ] && sniffer_set="sniffer: {enable: true, skip-domain: [Mijia Cloud], sniff: {tls: {ports: [443, 8443]}, http: {ports: [80, 8080-8880]}}}"
-	[ "$clashcore" = "clashpre" ] && [ "$dns_mod" = "redir_host" ] && exper="experimental: {ignore-resolve-fail: true, interface-name: en0, sniff-tls-sni: true}"
+	[ "$sniffer" = "已启用" ] && [ "$crashcore" = "meta" ] && sniffer_set="sniffer: {enable: true, skip-domain: [Mijia Cloud], sniff: {tls: {ports: [443, 8443]}, http: {ports: [80, 8080-8880]}}}"
+	[ "$crashcore" = "clashpre" ] && [ "$dns_mod" = "redir_host" ] && exper="experimental: {ignore-resolve-fail: true, interface-name: en0, sniff-tls-sni: true}"
 	#生成set.yaml
 	cat > $TMPDIR/set.yaml <<EOF
 mixed-port: $mix_port
@@ -342,7 +370,6 @@ secret: $secret
 $tun
 $exper
 $sniffer_set
-store-selected: $restore
 $find_process
 EOF
 	#读取本机hosts并生成配置文件
@@ -367,8 +394,8 @@ EOF
 	fi	
 	#分割配置文件
 	yaml_char='proxies proxy-groups proxy-providers rules rule-providers'
-	for char in $yaml_char;do
-		sed -n "/^$char:/,/^[a-z]/ { /^[a-z]/d; p; }" $yaml > $TMPDIR/${char}.yaml
+	for char in $core_config_char;do
+		sed -n "/^$char:/,/^[a-z]/ { /^[a-z]/d; p; }" $core_config > $TMPDIR/${char}.yaml
 	done
 	#跳过本地tls证书验证
 	[ "$skip_cert" = "已开启" ] && sed -i 's/skip-cert-verify: false/skip-cert-verify: true/' $TMPDIR/proxies.yaml || \
@@ -447,21 +474,21 @@ EOF
 		#set和user去重,且优先使用user.yaml
 		cp -f $TMPDIR/set.yaml $TMPDIR/set_bak.yaml
 		for char in mode allow-lan log-level tun experimental interface-name dns store-selected;do
-			[ -n "$(grep -E "^$char" $yaml_user)" ] && sed -i "/^$char/d" $TMPDIR/set.yaml
+			[ -n "$(grep -E "^$char" $core_config_user)" ] && sed -i "/^$char/d" $TMPDIR/set.yaml
 		done
 	}
 	[ -s $TMPDIR/dns.yaml ] && yaml_dns=$TMPDIR/dns.yaml
 	[ -s $TMPDIR/hosts.yaml ] && yaml_hosts=$TMPDIR/hosts.yaml
 	[ -s $CRASHDIR/yamls/others.yaml ] && yaml_others=$CRASHDIR/yamls/others.yaml
 	yaml_add=
-	for char in $yaml_char;do #将额外配置文件合并
+	for char in $core_config_char;do #将额外配置文件合并
 		[ -s $TMPDIR/${char}.yaml ] && {
 			sed -i "1i\\${char}:" $TMPDIR/${char}.yaml
-			yaml_add="$yaml_add $TMPDIR/${char}.yaml"
+			yaml_add="$core_config_add $TMPDIR/${char}.yaml"
 		}
 	done	
 	#合并完整配置文件
-	cut -c 1- $TMPDIR/set.yaml $yaml_dns $yaml_hosts $yaml_user $yaml_others $yaml_add > $TMPDIR/config.yaml
+	cut -c 1- $TMPDIR/set.yaml $core_config_dns $core_config_hosts $core_config_user $core_config_others $core_config_add > $TMPDIR/config.yaml
 	#测试自定义配置文件
 	$bindir/clash -t -d $bindir -f $TMPDIR/config.yaml >/dev/null
 	if [ "$?" != 0 ];then
@@ -472,16 +499,187 @@ EOF
 		sed -i "/#自定义策略组开始/,/#自定义策略组结束/d"  $TMPDIR/proxy-groups.yaml
 		mv -f $TMPDIR/set_bak.yaml $TMPDIR/set.yaml &>/dev/null
 		#合并基础配置文件
-		cut -c 1- $TMPDIR/set.yaml $yaml_dns $yaml_add > $TMPDIR/config.yaml
+		cut -c 1- $TMPDIR/set.yaml $core_config_dns $core_config_add > $TMPDIR/config.yaml
 		sed -i "/#自定义/d" $TMPDIR/config.yaml 
 	fi
 	#建立软连接
 	[ "$TMPDIR" = "$bindir" ] || ln -sf $TMPDIR/config.yaml $bindir/config.yaml
 	#清理缓存
-	for char in $yaml_char set set_bak dns hosts;do
+	for char in $core_config_char set set_bak dns hosts;do
 		rm -f $TMPDIR/${char}.yaml
 	done
 }
+modify_json(){
+	#生成log.json
+	cat > $TMPDIR/log.json <<EOF
+{
+	"log": {
+		"disabled": false,
+		"level": "info",
+		"timestamp": true
+	},
+EOF
+	#生成dns.json
+	[ -z "$dns_nameserver" ] && dns_nameserver='114.114.114.114, 223.5.5.5'
+	[ -z "$dns_fallback" ] && dns_fallback='1.0.0.1, 8.8.4.4'
+	[ "$ipv6_dns" = "已开启" ] && strategy='prefer_ipv4' || strategy='ipv4_only'
+	[ "$dns_mod" = "fake-ip" ] && proxy_dns=dns_fakeip || proxy_dns=dns_proxy
+	
+	if [ "$hosts_opt" != "未启用" ];then #本机hosts
+		reverse_mapping=true
+		sys_hosts=/etc/hosts
+		[ -s /data/etc/custom_hosts ] && sys_hosts=/data/etc/custom_hosts
+		#NTP劫持
+		[ -s $sys_hosts ] && {
+		sed -i '/203.107.6.88/d' $sys_hosts
+		cat >> $sys_hosts <<EOF
+203.107.6.88 time.android.com
+203.107.6.88 time.facebook.com
+EOF
+}
+	else
+		reverse_mapping=false
+	fi
+	[ -z "$(cat $CRASHDIR/jsons/user.json 2>/dev/null | grep '^dns:')" ] && { 
+		cat > $TMPDIR/dns.json <<EOF
+	"dns": { 
+		"servers": [{
+			"tag": "dns_proxy",
+			"address": "$dns_fallback",
+			"strategy": "$strategy",
+			"address_resolver": "dns_resolver"
+		}, {
+			"tag": "dns_direct",
+			"address": "$dns_nameserver",
+			"strategy": "$strategy",
+			"address_resolver": "dns_resolver",
+			"detour": "DIRECT"
+		}, {
+			"tag": "dns_fakeip",
+			"address": "fakeip"
+		}, {
+			"tag": "dns_resolver",
+			"address": "https://223.5.5.5/dns-query, 223.5.5.5",
+			"detour": "DIRECT"
+		}, {
+			"tag": "block",
+			"address": "rcode://success"
+		}],
+		"rules": [{
+			"outbound": ["any"],
+			"server": "dns_resolver"
+		}, {
+			"geosite": ["geolocation-!cn"],
+			"server": "$proxy_dns"
+		}],
+		"final": "dns_direct",
+		"independent_cache": true,
+		"reverse_mapping": true,
+		"fakeip": { "enabled": true, "inet4_range": "198.18.0.0/15" }
+	},
+EOF
+	}
+	#生成ntp.json
+	cat > $TMPDIR/ntp.json <<EOF
+	"ntp": {
+		"enabled": true,
+		"server": "time.apple.com",
+		"server_port": 123,
+		"interval": "30m"
+	},
+EOF
+	#生成inbounds.json
+	username=$(echo $authentication | awk -F ':' '{print $1}') #混合端口账号密码
+	password=$(echo $authentication | awk -F ':' '{print $2}')
+	[ "$sniffer" = "已启用" ] && sniffer=ture || sniffer=false #域名嗅探配置
+	if [ "$redir_mod" = "混合模式" -o "$redir_mod" = "Tun模式" ];then
+		type_in=tun
+		tag_in=tun-in
+	else
+		type_in=direct
+		tag_in=direct-in
+	fi
+		
+	cat > $TMPDIR/inbounds.json <<EOF
+	"inbounds": [
+	{
+		"type": "mixed",
+		"tag": "mixed-in",
+		"listen": "0.0.0.0",
+		"listen_port": $mix_port,
+		"users": [{ "username": "$username", "password": "$password" }],
+	}, {
+		"type": "redirect",
+		"tag": "redirect-in",
+		"listen": "::",
+		"listen_port": $redir_port,
+		"sniff": $sniffer
+	}, {
+		"type": "tproxy",
+		"tag": "tproxy-in",
+		"listen": "::",
+		"listen_port": $tproxy_port,
+		"sniff": $sniffer
+	}, {
+		"type": "tun",
+		"tag": "tun-in",
+		"interface_name": "utun",
+		"inet4_address": "172.19.0.1/30",
+		"auto_route": false,
+		"stack": "system",
+		"sniff": $sniffer
+	}
+	],
+EOF
+	#生成experimental.json
+	cat > $TMPDIR/experimental.json <<EOF
+	"experimental": {
+		"clash_api": {
+			"external_controller": "0.0.0.0:$db_port",
+			"external_ui": "ui",
+			"secret": "$secret",
+			"default_mode": "Rule"
+		}
+	}
+}
+EOF
+	#分割配置文件获得outbounds.json及route.json
+	cat $core_config | sed -n '/"outbounds":/,/"route":/{/"route":/d; p}' > $TMPDIR/outbounds.json
+	cat $core_config | sed -n '/"route":/,/"experimental":/{/"experimental":/d; p}' > $TMPDIR/route.json
+	#跳过本地tls证书验证
+	if [ -z "$skip_cert" -o "$skip_cert" = "已开启" ];then
+		sed -i 's/"insecure": false/"insecure": true/' $TMPDIR/outbounds.json
+	else
+		sed -i 's/"insecure":  true/"insecure":  false/' $TMPDIR/outbounds.json
+	fi
+	#合并文件
+	json_all=
+	for char in log dns ntp inbounds outbounds route experimental;do
+		[ -s $TMPDIR/$char.json ] && json_add=$TMPDIR/$char.json
+		[ -s $CRASHDIR/jsons/$char.json ] && json_add=$CRASHDIR/jsons/$char.json #如果有自定义配置文件则使用
+		json_all="$json_all $json_add"
+	done
+	cut -c 1- $json_all > $TMPDIR/all.json
+	#测试自定义配置文件
+	$bindir/singbox check -D $bindir -c $TMPDIR/config.json >/dev/null
+	if [ "$?" != 0 ];then
+		logger "$($bindir/singbox check -D $bindir -c $TMPDIR/config.json | grep -Eo 'error.*=.*')" 31
+		logger "自定义配置文件校验失败！将使用基础配置文件启动！" 33
+		logger "错误详情请参考 $TMPDIR/error.json 文件！" 33
+		mv -f $TMPDIR/config.json $TMPDIR/error.json &>/dev/null
+		#合并基础配置文件
+		for char in log dns ntp inbounds outbounds route experimental;do
+			[ -s $TMPDIR/$char.json ] && json_add=$TMPDIR/$char.json
+			json_all="$json_all $json_add"
+		done
+		cut -c 1- $json_all > $TMPDIR/config.json
+	fi
+	#清理缓存
+	for char in all log dns ntp inbounds outbounds route experimental;do
+		rm -f $TMPDIR/${char}.json
+	done
+}
+
 #设置路由规则
 cn_ip_route(){	
 	[ ! -f $bindir/cn_ip.txt ] && {
@@ -790,7 +988,7 @@ start_tun(){
 		[ "$1" = "all" ] && iptables -t mangle -A PREROUTING -p tcp $ports -j clash
 		
 		#设置ipv6转发
-		[ "$ipv6_redir" = "已开启" -a "$clashcore" = "meta" ] && {
+		[ "$ipv6_redir" = "已开启" -a "$crashcore" = "meta" ] && {
 			ip -6 route add default dev utun table 101
 			ip -6 rule add fwmark $fwmark table 101
 			ip6tables -t mangle -N clashv6
@@ -830,30 +1028,30 @@ start_nft(){
 	ip rule add fwmark $fwmark table 100
 	ip route add local default dev lo table 100
 	[ "$redir_mod" = "Nft基础" ] && \
-		nft add chain inet shellclash prerouting { type nat hook prerouting priority -100 \; }
+		nft add chain inet shellcrash prerouting { type nat hook prerouting priority -100 \; }
 	[ "$redir_mod" = "Nft混合" ] && {
 		modprobe nft_tproxy &> /dev/null
-		nft add chain inet shellclash prerouting { type filter hook prerouting priority 0 \; }
+		nft add chain inet shellcrash prerouting { type filter hook prerouting priority 0 \; }
 	}
 	[ -n "$(echo $redir_mod|grep Nft)" ] && {
 		#过滤局域网设备
 		[ -n "$(cat $CRASHDIR/configs/mac)" ] && {
 			MAC=$(awk '{printf "%s, ",$1}' $CRASHDIR/configs/mac)
 			[ "$macfilter_type" = "黑名单" ] && \
-				nft add rule inet shellclash prerouting ether saddr {$MAC} return || \
-				nft add rule inet shellclash prerouting ether saddr != {$MAC} return
+				nft add rule inet shellcrash prerouting ether saddr {$MAC} return || \
+				nft add rule inet shellcrash prerouting ether saddr != {$MAC} return
 		}
 		#过滤保留地址
-		nft add rule inet shellclash prerouting ip daddr {$RESERVED_IP} return
+		nft add rule inet shellcrash prerouting ip daddr {$RESERVED_IP} return
 		#仅代理本机局域网网段流量
-		nft add rule inet shellclash prerouting ip saddr != {$HOST_IP} return
+		nft add rule inet shellcrash prerouting ip saddr != {$HOST_IP} return
 		#绕过CN-IP
 		[ "$dns_mod" = "redir_host" -a "$cn_ip_route" = "已开启" -a -f $bindir/cn_ip.txt ] && {
 			CN_IP=$(awk '{printf "%s, ",$1}' $bindir/cn_ip.txt)
-			[ -n "$CN_IP" ] && nft add rule inet shellclash prerouting ip daddr {$CN_IP} return
+			[ -n "$CN_IP" ] && nft add rule inet shellcrash prerouting ip daddr {$CN_IP} return
 		}
 		#过滤常用端口
-		[ -n "$PORTS" ] && nft add rule inet shellclash prerouting tcp dport != {$PORTS} ip daddr != {198.18.0.0/16} return
+		[ -n "$PORTS" ] && nft add rule inet shellcrash prerouting tcp dport != {$PORTS} ip daddr != {198.18.0.0/16} return
 		#ipv6支持
 		if [ "$ipv6_redir" = "已开启" ];then
 			RESERVED_IP6="$(echo "$reserve_ipv6 $host_ipv6" | sed 's/ /, /g')"
@@ -861,62 +1059,62 @@ start_nft(){
 			ip -6 rule add fwmark $fwmark table 101 2> /dev/null
 			ip -6 route add local ::/0 dev lo table 101 2> /dev/null
 			#过滤保留地址及本机地址
-			nft add rule inet shellclash prerouting ip6 daddr {$RESERVED_IP6} return
+			nft add rule inet shellcrash prerouting ip6 daddr {$RESERVED_IP6} return
 			#仅代理本机局域网网段流量
-			nft add rule inet shellclash prerouting ip6 saddr != {$HOST_IP6} return
+			nft add rule inet shellcrash prerouting ip6 saddr != {$HOST_IP6} return
 			#绕过CN_IPV6
 			[ "$dns_mod" = "redir_host" -a "$cn_ipv6_route" = "已开启" -a -f $bindir/cn_ipv6.txt ] && {
 				CN_IP6=$(awk '{printf "%s, ",$1}' $bindir/cn_ipv6.txt)
-				[ -n "$CN_IP6" ] && nft add rule inet shellclash prerouting ip6 daddr {$CN_IP6} return
+				[ -n "$CN_IP6" ] && nft add rule inet shellcrash prerouting ip6 daddr {$CN_IP6} return
 			}
 		else
-			nft add rule inet shellclash prerouting meta nfproto ipv6 return
+			nft add rule inet shellcrash prerouting meta nfproto ipv6 return
 		fi
 		#透明路由
-		[ "$redir_mod" = "Nft基础" ] && nft add rule inet shellclash prerouting meta l4proto tcp mark set $fwmark redirect to $redir_port
-		[ "$redir_mod" = "Nft混合" ] && nft add rule inet shellclash prerouting meta l4proto {tcp, udp} mark set $fwmark tproxy to :$tproxy_port
+		[ "$redir_mod" = "Nft基础" ] && nft add rule inet shellcrash prerouting meta l4proto tcp mark set $fwmark redirect to $redir_port
+		[ "$redir_mod" = "Nft混合" ] && nft add rule inet shellcrash prerouting meta l4proto {tcp, udp} mark set $fwmark tproxy to :$tproxy_port
 	}
 	#屏蔽QUIC
 	[ "$quic_rj" = 已启用 ] && {
-		nft add chain inet shellclash input { type filter hook input priority 0 \; }
-		[ -n "$CN_IP" ] && nft add rule inet shellclash input ip daddr {$CN_IP} return
-		[ -n "$CN_IP6" ] && nft add rule inet shellclash input ip6 daddr {$CN_IP6} return
-		nft add rule inet shellclash input udp dport 443 reject comment 'ShellCrash-QUIC-REJECT'
+		nft add chain inet shellcrash input { type filter hook input priority 0 \; }
+		[ -n "$CN_IP" ] && nft add rule inet shellcrash input ip daddr {$CN_IP} return
+		[ -n "$CN_IP6" ] && nft add rule inet shellcrash input ip6 daddr {$CN_IP6} return
+		nft add rule inet shellcrash input udp dport 443 reject comment 'ShellCrash-QUIC-REJECT'
 	}
 	#代理本机(仅TCP)
 	[ "$local_proxy" = "已开启" ] && [ "$local_type" = "nftables增强模式" ] && {
 		#dns
-		nft add chain inet shellclash dns_out { type nat hook output priority -100 \; }
-		nft add rule inet shellclash dns_out meta skgid { 453, 7890 } return && \
-		nft add rule inet shellclash dns_out udp dport 53 redirect to $dns_port
+		nft add chain inet shellcrash dns_out { type nat hook output priority -100 \; }
+		nft add rule inet shellcrash dns_out meta skgid { 453, 7890 } return && \
+		nft add rule inet shellcrash dns_out udp dport 53 redirect to $dns_port
 		#output
-		nft add chain inet shellclash output { type nat hook output priority -100 \; }
-		nft add rule inet shellclash output meta skgid 7890 return && {
-			[ -n "$PORTS" ] && nft add rule inet shellclash output tcp dport != {$PORTS} return
-			nft add rule inet shellclash output ip daddr {$RESERVED_IP} return
-			nft add rule inet shellclash output meta l4proto tcp mark set $fwmark redirect to $redir_port
+		nft add chain inet shellcrash output { type nat hook output priority -100 \; }
+		nft add rule inet shellcrash output meta skgid 7890 return && {
+			[ -n "$PORTS" ] && nft add rule inet shellcrash output tcp dport != {$PORTS} return
+			nft add rule inet shellcrash output ip daddr {$RESERVED_IP} return
+			nft add rule inet shellcrash output meta l4proto tcp mark set $fwmark redirect to $redir_port
 		}
 		#Docker
 		type docker &>/dev/null && {
-			nft add chain inet shellclash docker { type nat hook prerouting priority -100 \; }
-			nft add rule inet shellclash docker ip saddr != {172.16.0.0/12} return #进代理docker网段
-			nft add rule inet shellclash docker ip daddr {$RESERVED_IP} return #过滤保留地址
-			nft add rule inet shellclash docker udp dport 53 redirect to $dns_port
-			nft add rule inet shellclash docker meta l4proto tcp mark set $fwmark redirect to $redir_port
+			nft add chain inet shellcrash docker { type nat hook prerouting priority -100 \; }
+			nft add rule inet shellcrash docker ip saddr != {172.16.0.0/12} return #进代理docker网段
+			nft add rule inet shellcrash docker ip daddr {$RESERVED_IP} return #过滤保留地址
+			nft add rule inet shellcrash docker udp dport 53 redirect to $dns_port
+			nft add rule inet shellcrash docker meta l4proto tcp mark set $fwmark redirect to $redir_port
 		}
 	}
 }
 start_nft_dns(){
-	nft add chain inet shellclash dns { type nat hook prerouting priority -100 \; }
+	nft add chain inet shellcrash dns { type nat hook prerouting priority -100 \; }
 	#过滤局域网设备
 	[ -n "$(cat $CRASHDIR/configs/mac)" ] && {
 		MAC=$(awk '{printf "%s, ",$1}' $CRASHDIR/configs/mac)
 		[ "$macfilter_type" = "黑名单" ] && \
-			nft add rule inet shellclash dns ether saddr {$MAC} return || \
-			nft add rule inet shellclash dns ether saddr != {$MAC} return
+			nft add rule inet shellcrash dns ether saddr {$MAC} return || \
+			nft add rule inet shellcrash dns ether saddr != {$MAC} return
 	}
-	nft add rule inet shellclash dns udp dport 53 redirect to ${dns_port}
-	nft add rule inet shellclash dns tcp dport 53 redirect to ${dns_port}
+	nft add rule inet shellcrash dns udp dport 53 redirect to ${dns_port}
+	nft add rule inet shellcrash dns tcp dport 53 redirect to ${dns_port}
 }
 start_wan(){
 	#获取局域网host地址
@@ -1045,8 +1243,8 @@ stop_firewall(){
 	ip -6 route del local ::/0 dev lo table 101 2> /dev/null
 	#重置nftables相关规则
 	ckcmd nft && {
-		nft flush table inet shellclash >/dev/null 2>&1
-		nft delete table inet shellclash >/dev/null 2>&1
+		nft flush table inet shellcrash >/dev/null 2>&1
+		nft delete table inet shellcrash >/dev/null 2>&1
 	}
 	#还原防火墙文件
 	[ -s /etc/init.d/firewall.bak ] && mv -f /etc/init.d/firewall.bak /etc/init.d/firewall
@@ -1141,68 +1339,28 @@ EOF
 	compare $TMPDIR/clash_pac $bindir/ui/pac
 	[ "$?" = 0 ] && rm -rf $TMPDIR/clash_pac || mv -f $TMPDIR/clash_pac $bindir/ui/pac
 }
-bfstart(){
-	#读取配置文件
-	getconfig
-	[ ! -d $bindir/ui ] && mkdir -p $bindir/ui
-	[ -z "$update_url" ] && update_url=https://fastly.jsdelivr.net/gh/juewuy/ShellCrash@master
-	#检查yaml配置文件
-	if [ ! -f $yaml ];then
-		if [ -n "$Url" -o -n "$Https" ];then
-			logger "未找到配置文件，正在下载！" 33
-			getyaml
-			exit 0
-		else
-			logger "未找到配置文件链接，请先导入配置文件！" 31
-			exit 1
-		fi
-	fi
+clash_check(){
 	#检测vless/hysteria协议
-	if [ -n "$(cat $yaml | grep -oE 'type: vless|type: hysteria')" ] && [ "$clashcore" != "meta" ];then
+	if [ "$crashcore" != "meta" ] && [ -n "$(cat $core_config | grep -oE 'type: vless|type: hysteria')" ];then
 		echo -----------------------------------------------
 		logger "检测到vless/hysteria协议！将改为使用meta核心启动！" 33
 		rm -rf $bindir/clash
-		clashcore=meta
-		setconfig clashcore meta
+		crashcore=meta
 		echo -----------------------------------------------
 	fi
-	#检测是否存在高级版规则
-	if [ "$clashcore" = "clash" -a -n "$(cat $yaml | grep -aE '^script:|proxy-providers|rule-providers|rule-set')" ];then
-		echo -----------------------------------------------
-		logger "检测到高级规则！将改为使用meta核心启动！" 33
-		rm -rf $bindir/clash
-		clashcore=meta
-		setconfig clashcore meta
-		echo -----------------------------------------------
+	#检测是否存在高级版规则或者tun模式
+	if [ "$crashcore" = "clash" ];then
+		[ -n "$(cat $core_config | grep -aE '^script:|proxy-providers|rule-providers|rule-set')" ] || \
+		[ "$redir_mod" = "混合模式" ] || \
+		[ "$redir_mod" = "Tun模式" ] && {
+			echo -----------------------------------------------
+			logger "检测到高级功能！将改为使用ClashPre核心启动！" 33
+			rm -rf $bindir/clash
+			crashcore=clashpre
+			echo -----------------------------------------------
+		}
 	fi
-	#检查clash核心
-	if [ ! -f $bindir/clash ];then
-		if [ -f $CRASHDIR/clash ];then
-			mv $CRASHDIR/clash $bindir/clash
-		else
-			logger "未找到clash核心，正在下载！" 33
-			if [ -z "$clashcore" ];then
-				[ "$redir_mod" = "混合模式" -o "$redir_mod" = "Tun模式" ] && clashcore=clashpre || clashcore=clash
-			fi
-			[ -z "$cpucore" ] && source $CRASHDIR/getdate.sh && getcpucore
-			[ -z "$cpucore" ] && logger 找不到设备的CPU信息，请手动指定处理器架构类型！ 31 && setcpucore
-			[ "$update_url" = "https://jwsc.eu.org:8888" ] && [ "$clashcore" != 'clash' ] && update_url=https://fastly.jsdelivr.net/gh/juewuy/ShellCrash@master
-			$0 webget $bindir/clash "$update_url/bin/$clashcore/clash-linux-$cpucore"
-			#校验内核
-			chmod +x $bindir/clash 2>/dev/null
-			clashv=$($bindir/clash -v 2>/dev/null | head -n 1 | sed 's/ linux.*//;s/.* //')
-			if [ -z "$clashv" ];then
-				rm -rf $bindir/clash
-				logger "核心下载失败，请重新运行或更换安装源！" 31
-				exit 1
-			else
-				setconfig clashcore $clashcore
-				setconfig clashv $clashv
-			fi
-		fi
-	fi
-	[ ! -x $bindir/clash ] && chmod +x $bindir/clash 	#检测可执行权限
-	#检查数据库文件
+	#预下载GeoIP数据库
 	if [ ! -f $bindir/Country.mmdb ];then
 		if [ -f $CRASHDIR/Country.mmdb ];then
 			mv $CRASHDIR/Country.mmdb $bindir/Country.mmdb
@@ -1214,54 +1372,131 @@ bfstart(){
 			setconfig Geo_v $Geo_v
 		fi
 	fi
+	#预下载GeoSite数据库
+	if [ -n "$(cat $core_config|grep -Ei 'geosite')" ] && [ ! -f $bindir/GeoSite.dat ];then
+		if [ -f $CRASHDIR/GeoSite.dat ];then
+			mv -f $CRASHDIR/GeoSite.dat $bindir/GeoSite.dat
+		else
+			logger "未找到GeoSite数据库，正在下载！" 33
+			$0 webget $bindir/GeoSite.dat $update_url/bin/geodata/geosite.dat
+			[ "$?" = "1" ] && rm -rf $bindir/GeoSite.dat && logger "数据库下载失败，已退出，请前往更新界面尝试手动下载！" 31 && exit 1
+		fi
+	fi
+}
+singbox_check(){
+	#预下载GeoIP数据库
+	if [ ! -f $bindir/geoip.db ];then
+		if [ -f $CRASHDIR/geoip.db ];then
+			mv $CRASHDIR/geoip.db $bindir/geoip.db
+		else
+			logger "未找到GeoIP数据库，正在下载！" 33
+			$0 webget $bindir/geoip.db $update_url/bin/geodata/geoip_cn.db
+			[ "$?" = "1" ] && rm -rf $bindir/geoip.db && logger "数据库下载失败，已退出，请前往更新界面尝试手动下载！" 31 && exit 1
+			Geo_v=$(date +"%Y%m%d")
+			setconfig Geo_v $Geo_v
+		fi
+	fi
+	#预下载GeoSite数据库
+	if [ -n "$(cat $core_config|grep -Ei '"geosite":')" ] && [ ! -f $bindir/geosite.db ];then
+		if [ -f $CRASHDIR/geosite.db ];then
+			mv -f $CRASHDIR/geosite.db$bindir/geosite.db
+		else
+			logger "未找到GeoSite数据库，正在下载！" 33
+			$0 webget $bindir/geosite.db $update_url/bin/geodata/geosite_cn.db
+			[ "$?" = "1" ] && rm -rf $bindir/geosite.db && logger "数据库下载失败，已退出，请前往更新界面尝试手动下载！" 31 && exit 1
+			Geo_v=$(date +"%Y%m%d")
+			setconfig Geo_v $Geo_v
+		fi
+	fi
+}
+bfstart(){
+	#读取ShellCrash配置
+	getconfig
+	[ -z "$update_url" ] && update_url=https://fastly.jsdelivr.net/gh/juewuy/ShellCrash@master
+	[ ! -d $bindir/ui ] && mkdir -p $bindir/ui
+	[ -z "$crashcore" ] && crashcore=clash
+	#检查内核配置文件
+	if [ ! -f $core_config ];then
+		if [ -n "$Url" -o -n "$Https" ];then
+			logger "未找到配置文件，正在下载！" 33
+			get_core_config
+			exit 0
+		else
+			logger "未找到配置文件链接，请先导入配置文件！" 31
+			exit 1
+		fi
+	fi
+
 	#检查dashboard文件
 	if [ -f $CRASHDIR/ui/index.html -a ! -f $bindir/ui/index.html ];then
 		cp -rf $CRASHDIR/ui $bindir
 	fi
 	[ ! -s $bindir/ui/index.html ] && makehtml #如没有面板则创建跳转界面
-	#检查curl或wget支持
-	curl --version > /dev/null 2>&1
-	[ "$?" = 1 ] && wget --version > /dev/null 2>&1
-	[ "$?" = 1 ] && restore=true || restore=false
 	#生成pac文件
 	catpac
-	#预下载GeoSite数据库
-	if [ "$clashcore" = "meta" ] && [ ! -f $bindir/GeoSite.dat ] && [ -n "$(cat $yaml|grep -Ei 'geosite')" ];then
-		[ -f $CRASHDIR/geosite.dat ] && mv -f $CRASHDIR/geosite.dat $CRASHDIR/GeoSite.dat
-		if [ -f $CRASHDIR/GeoSite.dat ];then
-			mv -f $CRASHDIR/GeoSite.dat $bindir/GeoSite.dat
-		else
-			logger "未找到geosite数据库，正在下载！" 33
-			$0 webget $bindir/GeoSite.dat $update_url/bin/geodata/geosite.dat
-			[ "$?" = "1" ] && rm -rf $bindir/GeoSite.dat && logger "数据库下载失败，已退出，请前往更新界面尝试手动下载！" 31 && exit 1
-		fi
+	#内核及内核配置文件检查
+	if [ "$crashcore" = singbox ];then
+		singbox_check
+		[ "$disoverride" != "1" ] && modify_json || ln -sf $core_config $bindir/config.json
+	else
+		clash_check
+		[ "$disoverride" != "1" ] && modify_yaml || ln -sf $core_config $bindir/config.yaml
 	fi
-	#本机代理准备
-	if [ "$local_proxy" = "已开启" -a -n "$(echo $local_type | grep '增强模式')" ];then
-		if [ -z "$(id shellclash 2>/dev/null | grep 'root')" ];then
-			if ckcmd userdel useradd groupmod; then
-				userdel shellclash 2>/dev/null
-				useradd shellclash -u 7890
-				groupmod shellclash -g 7890
-				sed -Ei s/7890:7890/0:7890/g /etc/passwd
+	#检查及下载内核文件
+	if [ ! -f $bindir/CrashCore ];then
+		if [ -f $CRASHDIR/CrashCore ];then
+			mv $CRASHDIR/CrashCore $bindir/CrashCore
+		elif [ -f $CRASHDIR/clash ];then
+			mv $CRASHDIR/clash $bindir/CrashCore
+		else
+			logger "未找到【$crashcore】核心，正在下载！" 33
+			[ -z "$cpucore" ] && source $CRASHDIR/getdate.sh && getcpucore
+			[ -z "$cpucore" ] && logger 找不到设备的CPU信息，请手动指定处理器架构类型！ 31 && exit 1
+			$0 webget $bindir/core.new "$update_url/bin/$crashcore/clash-linux-$cpucore"
+			#校验内核
+			chmod +x $bindir/core.new 2>/dev/null
+			if [ "$crashcore" = singbox ];then
+				core_v=$($TMPDIR/core.new version 2>/dev/null | grep version | awk '{print $3}')
 			else
-				grep -qw shellclash /etc/passwd || echo "shellclash:x:0:7890:::" >> /etc/passwd
+				core_v=$($TMPDIR/core.new -v 2>/dev/null | sed 's/ linux.*//;s/.* //')
+			fi
+			if [ -z "$core_v" ];then
+				rm -rf $bindir/clash
+				logger "核心下载失败，请重新运行或更换安装源！" 31
+				exit 1
+			else
+				setconfig crashcore $crashcore
+				setconfig core_v $core_v
 			fi
 		fi
+	fi
+	[ ! -x $bindir/clash ] && chmod +x $bindir/clash 	#检测可执行权限
+	#本机代理准备
+	if [ "$local_proxy" = "已开启" -a -n "$(echo $local_type | grep '增强模式')" ];then
+		#添加shellcrash用户
+		if [ -z "$(id shellcrash 2>/dev/null | grep 'root')" ];then
+			if ckcmd userdel useradd groupmod; then
+				userdel shellcrash 2>/dev/null
+				useradd shellcrash -u 7890
+				groupmod shellcrash -g 7890
+				sed -Ei s/7890:7890/0:7890/g /etc/passwd
+			else
+				grep -qw shellcrash /etc/passwd || echo "shellcrash:x:0:7890:::" >> /etc/passwd
+			fi
+		fi
+		#修改启动文件
 		if [ "$start_old" != "已开启" ];then
-			[ -w /etc/systemd/system/clash.service ] && servdir=/etc/systemd/system/clash.service
-			[ -w /usr/lib/systemd/system/clash.service ] && servdir=/usr/lib/systemd/system/clash.service
+			[ -w /etc/systemd/system/shellcrash.service ] && servdir=/etc/systemd/system/shellcrash.service
+			[ -w /usr/lib/systemd/system/shellcrash.service ] && servdir=/usr/lib/systemd/system/shellcrash.service
 			if [ -w /etc/init.d/clash ]; then
-				[ -z "$(grep 'procd_set_param user shellclash' /etc/init.d/clash)" ] && \
-    			sed -i '/procd_close_instance/i\\t\tprocd_set_param user shellclash' /etc/init.d/clash
+				[ -z "$(grep 'procd_set_param user shellcrash' /etc/init.d/clash)" ] && \
+    			sed -i '/procd_close_instance/i\\t\tprocd_set_param user shellcrash' /etc/init.d/clash
 			elif [ -w "$servdir" ]; then
-				setconfig ExecStart "/bin/su shellclash -c \"$bindir/clash -d $bindir -f $TMPDIR/config.yaml >/dev/null\"" $servdir
+				setconfig User shellcrash $servdir
 				systemctl daemon-reload >/dev/null
 			fi
 		fi
 	fi
-	#生成配置文件
-	[ "$disoverride" != "1" ] && modify_yaml || ln -sf $yaml $bindir/config.yaml
 	#执行条件任务
 	[ -s $CRASHDIR/task/bfstart ] && source $CRASHDIR/task/bfstart
 }
@@ -1274,81 +1509,78 @@ afstart(){
 		logger "clash将延迟$start_delay秒启动" 31 pushoff
 		sleep $start_delay
 	}
-	$bindir/clash -t -d $bindir >/dev/null
-	if [ "$?" = 0 ];then
-		#设置DNS转发
-		start_dns(){
-			[ "$dns_mod" = "redir_host" ] && [ "$cn_ip_route" = "已开启" ] && cn_ip_route
-			[ "$ipv6_redir" = "已开启" ] && [ "$dns_mod" = "redir_host" ] && [ "$cn_ipv6_route" = "已开启" ] && cn_ipv6_route
-			if [ "$dns_no" != "已禁用" ];then
-				if [ "$dns_redir" != "已开启" ];then
-					[ -n "$(echo $redir_mod|grep Nft)" ] && start_nft_dns || start_ipt_dns
-				else
-					#openwrt使用dnsmasq转发
-					uci del dhcp.@dnsmasq[-1].server >/dev/null 2>&1
-					uci delete dhcp.@dnsmasq[0].resolvfile 2>/dev/null
-					uci add_list dhcp.@dnsmasq[0].server=127.0.0.1#$dns_port > /dev/null 2>&1
-					uci set dhcp.@dnsmasq[0].noresolv=1 2>/dev/null
-					uci commit dhcp >/dev/null 2>&1
-					/etc/init.d/dnsmasq restart >/dev/null 2>&1
-				fi
+	#设置DNS转发
+	start_dns(){
+		[ "$dns_mod" = "redir_host" ] && [ "$cn_ip_route" = "已开启" ] && cn_ip_route
+		[ "$ipv6_redir" = "已开启" ] && [ "$dns_mod" = "redir_host" ] && [ "$cn_ipv6_route" = "已开启" ] && cn_ipv6_route
+		if [ "$dns_no" != "已禁用" ];then
+			if [ "$dns_redir" != "已开启" ];then
+				[ -n "$(echo $redir_mod|grep Nft)" ] && start_nft_dns || start_ipt_dns
+			else
+				#openwrt使用dnsmasq转发
+				uci del dhcp.@dnsmasq[-1].server >/dev/null 2>&1
+				uci delete dhcp.@dnsmasq[0].resolvfile 2>/dev/null
+				uci add_list dhcp.@dnsmasq[0].server=127.0.0.1#$dns_port > /dev/null 2>&1
+				uci set dhcp.@dnsmasq[0].noresolv=1 2>/dev/null
+				uci commit dhcp >/dev/null 2>&1
+				/etc/init.d/dnsmasq restart >/dev/null 2>&1
 			fi
-			return 0
-		}
-		#设置路由规则
-		#[ "$ipv6_redir" = "已开启" ] && ipv6_wan=$(ip addr show|grep -A1 'inet6 [^f:]'|grep -oE 'inet6 ([a-f0-9:]+)/'|sed s#inet6\ ##g|sed s#/##g)
-		[ "$redir_mod" = "Redir模式" ] && start_dns && start_redir 	
-		[ "$redir_mod" = "混合模式" ] && start_dns && start_redir && start_tun udp
-		[ "$redir_mod" = "Tproxy混合" ] && start_dns && start_redir && start_tproxy udp
-		[ "$redir_mod" = "Tun模式" ] && start_dns && start_tun all
-		[ "$redir_mod" = "Tproxy模式" ] && start_dns && start_tproxy all
-		[ -n "$(echo $redir_mod|grep Nft)" -o "$local_type" = "nftables增强模式" ] && {
-			nft add table inet shellclash #初始化nftables
-			nft flush table inet shellclash
-		}
-		[ -n "$(echo $redir_mod|grep Nft)" ] && start_dns && start_nft
-		#设置本机代理
-		[ "$local_proxy" = "已开启" ] && {
-			[ "$local_type" = "环境变量" ] && $0 set_proxy $mix_port $db_port
-			[ "$local_type" = "iptables增强模式" ] && start_output
-			[ "$local_type" = "nftables增强模式" ] && [ "$redir_mod" = "纯净模式" ] && start_nft
-		}
-		ckcmd iptables && start_wan #本地防火墙
-		mark_time #标记启动时间
-		[ -s $CRASHDIR/task/cron ] && croncmd $CRASHDIR/task/cron #加载定时任务
-		[ -s $CRASHDIR/configs/web_save ] && web_restore & #后台还原面板配置
-		{ sleep 5;logger Clash服务已启动！;} & #推送日志
-		#执行条件任务
-		[ -s $CRASHDIR/task/afstart ] && { source $CRASHDIR/task/afstart ;} &
-		[ -s $CRASHDIR/task/running ] && {
-			cronset '运行时每'
-			while read line ;do
-				cronset '2fjdi124dd12s' "$line"
-			done < $CRASHDIR/task/running
-		}
-		[ -s $CRASHDIR/task/affirewall -a -s /etc/init.d/firewall -a ! -f /etc/init.d/firewall.bak ] && {
-			#注入防火墙
-			line=$(grep -En "fw3 restart" /etc/init.d/firewall | cut -d ":" -f 1)
-			sed -i.bak "${line}a\\source $CRASHDIR/task/affirewall" /etc/init.d/firewall
-			line=$(grep -En "fw3 .* start" /etc/init.d/firewall | cut -d ":" -f 1)
-			sed -i "${line}a\\source $CRASHDIR/task/affirewall" /etc/init.d/firewall
-		}
-	else
-		logger "Clash服务启动失败！请查看报错信息！" 33
-		logger "$($bindir/clash -t -d $bindir | grep -Eo 'error.*=.*')" 31
-		$0 stop
-		exit 1
-	fi
+		fi
+		return 0
+	}
+	#设置路由规则
+	#[ "$ipv6_redir" = "已开启" ] && ipv6_wan=$(ip addr show|grep -A1 'inet6 [^f:]'|grep -oE 'inet6 ([a-f0-9:]+)/'|sed s#inet6\ ##g|sed s#/##g)
+	[ "$redir_mod" = "Redir模式" ] && start_dns && start_redir 	
+	[ "$redir_mod" = "混合模式" ] && start_dns && start_redir && start_tun udp
+	[ "$redir_mod" = "Tproxy混合" ] && start_dns && start_redir && start_tproxy udp
+	[ "$redir_mod" = "Tun模式" ] && start_dns && start_tun all
+	[ "$redir_mod" = "Tproxy模式" ] && start_dns && start_tproxy all
+	[ -n "$(echo $redir_mod|grep Nft)" -o "$local_type" = "nftables增强模式" ] && {
+		nft add table inet shellcrash #初始化nftables
+		nft flush table inet shellcrash
+	}
+	[ -n "$(echo $redir_mod|grep Nft)" ] && start_dns && start_nft
+	#设置本机代理
+	[ "$local_proxy" = "已开启" ] && {
+		[ "$local_type" = "环境变量" ] && $0 set_proxy $mix_port $db_port
+		[ "$local_type" = "iptables增强模式" ] && start_output
+		[ "$local_type" = "nftables增强模式" ] && [ "$redir_mod" = "纯净模式" ] && start_nft
+	}
+	ckcmd iptables && start_wan #本地防火墙
+	mark_time #标记启动时间
+	[ -s $CRASHDIR/task/cron ] && croncmd $CRASHDIR/task/cron #加载定时任务
+	[ -s $CRASHDIR/configs/web_save ] && web_restore & #后台还原面板配置
+	{ sleep 5;logger Clash服务已启动！;} & #推送日志
+	#执行条件任务
+	[ -s $CRASHDIR/task/afstart ] && { source $CRASHDIR/task/afstart ;} &
+	[ -s $CRASHDIR/task/running ] && {
+		cronset '运行时每'
+		while read line ;do
+			cronset '2fjdi124dd12s' "$line"
+		done < $CRASHDIR/task/running
+	}
+	[ -s $CRASHDIR/task/affirewall -a -s /etc/init.d/firewall -a ! -f /etc/init.d/firewall.bak ] && {
+		#注入防火墙
+		line=$(grep -En "fw3 restart" /etc/init.d/firewall | cut -d ":" -f 1)
+		sed -i.bak "${line}a\\source $CRASHDIR/task/affirewall" /etc/init.d/firewall
+		line=$(grep -En "fw3 .* start" /etc/init.d/firewall | cut -d ":" -f 1)
+		sed -i "${line}a\\source $CRASHDIR/task/affirewall" /etc/init.d/firewall
+	}
 }
 start_old(){
+	source $CRASHDIR/configs/service.env
 	bfstart
 	#使用传统后台执行二进制文件的方式执行
 	if [ "$local_proxy" = "已开启" -a -n "$(echo $local_type | grep '增强模式')" ];then
-		ckcmd su && su=su
-		$su shellclash -c "$bindir/clash -d $bindir >/dev/null" &
+		if ckcmd su;then
+			su shellcrash -c "$COMMAND" 2>&1 &
+		else
+			logger "当前设备缺少su命令，保守模式下无法兼容本机代理增强模式，已停止启动！" 31
+			exit 1
+		fi
 	else
-		ckcmd nohup && nohup=nohup
-		$nohup $bindir/clash -d $bindir >/dev/null 2>&1 &
+		ckcmd nohup && nohup=nohup #华硕调用nohup启动
+		$nohup "$COMMAND" 2>&1 &
 	fi
 	afstart
 	$0 daemon
@@ -1363,35 +1595,35 @@ afstart)
 		afstart
 	;;
 start)		
-		[ -n "$(pidof clash)" ] && $0 stop #禁止多实例
+		[ -n "$(pidof CrashCore)" ] && $0 stop #禁止多实例
 		getconfig
 		stop_firewall #清理路由策略
 		#使用不同方式启动服务
 		if [ "$start_old" = "已开启" ];then
 			start_old
-		elif [ -f /etc/rc.common ];then
-			/etc/init.d/clash start
-		elif [ "$USER" = "root" ];then
-			systemctl start clash.service
+		elif [ -f /etc/rc.common -a -n "$(pidof procd)" ];then
+			service shellcrash start
+		elif [ "$USER" = "root" -a -n "$(pidof systemd)" ];then
+			systemctl start shellcrash.service
 		else
 			start_old
 		fi
 	;;
 stop)	
 		getconfig
-		logger Clash服务即将关闭……
-		[ -n "$(pidof clash)" ] && web_save #保存面板配置
+		logger ShellCrash服务即将关闭……
+		[ -n "$(pidof CrashCore)" ] && web_save #保存面板配置
 		#删除守护进程&面板配置自动保存
 		cronset '保守模式守护进程'
 		cronset '运行时每'
 		cronset '流媒体预解析'
 		#多种方式结束进程
 		if [ -f /etc/rc.common ];then
-			/etc/init.d/clash stop >/dev/null 2>&1
+			service shellcrash stop >/dev/null 2>&1
 		elif [ "$USER" = "root" ];then
-			systemctl stop clash.service >/dev/null 2>&1
+			systemctl stop shellcrash.service >/dev/null 2>&1
 		fi
-		PID=$(pidof clash) && [ -n "$PID" ] &&  kill -9 $PID >/dev/null 2>&1
+		PID=$(pidof CrashCore) && [ -n "$PID" ] &&  kill -9 $PID >/dev/null 2>&1
 		stop_firewall #清理路由策略
 		$0 unset_proxy #禁用本机代理
         ;;
@@ -1420,20 +1652,20 @@ init)
 		fi
 		sed -i "/alias crash/d" $profile 
 		sed -i "/export CRASHDIR/d" $profile 
-		echo "alias crash=\"$CRASHDIR/clash.sh\"" >> $profile 
+		echo "alias crash=\"$CRASHDIR/menu.sh\"" >> $profile 
 		echo "export CRASHDIR=\"$CRASHDIR\"" >> $profile 
 		[ -f $CRASHDIR/.dis_startup ] && cronset "保守模式守护进程" || $0 start
         ;;
 getyaml)	
 		getconfig
-		getyaml && \
+		get_core_config && \
 		logger "任务:【更新订阅并重启服务】配置文件已更新！"
 		;;
 updateyaml)	
 		getconfig
-		getyaml && \
-		modify_yaml && \
-		put_save http://127.0.0.1:${db_port}/configs "{\"path\":\"${CRASHDIR}/config.yaml\"}" && \
+		get_core_config
+		modify_$format && \
+		put_save http://127.0.0.1:${db_port}/configs "{\"path\":\"${CRASHDIR}/config.$format\"}" && \
 		logger "任务:【热更新订阅】配置文件已更新！"
 		;;
 ntp)
@@ -1444,7 +1676,7 @@ logger)
 	;;
 webget)
 		#设置临时代理 
-		if [ -n "$(pidof clash)" ];then
+		if [ -n "$(pidof CrashCore)" ];then
 			getconfig
 			[ -n "$authentication" ] && auth="$authentication@"
 			export all_proxy="http://${auth}127.0.0.1:$mix_port"
@@ -1493,7 +1725,7 @@ web_restore)
 	;;
 daemon)
 		getconfig
-		cronset '保守模式守护进程' "*/1 * * * * test -z \"\$(pidof clash)\" && $CRASHDIR/start.sh restart #保守模式守护进程"
+		cronset '保守模式守护进程' "*/1 * * * * test -z \"\$(pidof CrashCore)\" && $CRASHDIR/start.sh restart #ShellCrash保守模式守护进程"
 	;;
 cronset)
 		cronset $2 $3
diff --git a/scripts/task.sh b/scripts/task.sh
index 27db50c..b1144a9 100644
--- a/scripts/task.sh
+++ b/scripts/task.sh
@@ -18,44 +18,49 @@ setconfig(){
 
 #任务命令
 check_update(){ #检查更新工具
-	$CRASHDIR/start.sh webget $TMPDIR/clashversion "$update_url/bin/version" echooff
-	[ "$?" = "0" ] && source $TMPDIR/clashversion 2>/dev/null	
-	rm -rf $TMPDIR/clashversion
+	$CRASHDIR/start.sh webget $TMPDIR/crashversion "$update_url/bin/version" echooff
+	[ "$?" = "0" ] && source $TMPDIR/crashversion 2>/dev/null	
+	rm -rf $TMPDIR/crashversion
 }
 update_core(){ #自动更新内核
 	#检查版本
 	check_update
-	clash_v_new=$(eval echo \$${crashcore}_v)
-	clash_v_now=$($bindir/clash -v 2>/dev/null | head -n 1 | sed 's/ linux.*//;s/.* //')
-	if [ -z "$clash_v_new" -o "$clash_v_new" = "clash_v_now" ];then
+	crash_v_new=$(eval echo \$${crashcore}_v)
+	if [ -z "$crash_v_new" -o "$crash_v_new" = "core_v" ];then
 		logger "任务【自动更新内核】中止-未检测到版本更新"
 		exit 1
 	else
 		#更新内核
-		$CRASHDIR/start.sh webget $TMPDIR/clash.new "$update_url/bin/$crashcore/clash-linux-$cpucore"
+		[ "$crashcore" = singbox ] && core_new=singbox || core_new=clash
+		$CRASHDIR/start.sh webget $TMPDIR/core.new "${update_url}/bin/${crashcore}/${core_new}-linux-${cpucore}"
 		if [ "$?" != "0" ];then
 			logger "任务【自动更新内核】出错-下载失败！"
-			rm -rf $TMPDIR/clash.new
+			rm -rf $TMPDIR/core.new
 			return 1
 		else
-			chmod +x $TMPDIR/clash.new
+			chmod +x $TMPDIR/core.new
 			$CRASHDIR/start.sh stop
-			clashv=$($TMPDIR/clash.new -v 2>/dev/null | sed 's/ linux.*//;s/.* //')
-			if [ -z "$clashv" ];then
-				logger "任务【自动更新内核】出错-下载失败！"
-				rm -rf $TMPDIR/clash.new
-				[ $crashcore = meta ] && $CRASHDIR/start.sh start
+			if [ "$crashcore" = singbox ];then
+				core_v=$($TMPDIR/core.new version 2>/dev/null | grep version | awk '{print $3}')
+			else
+				core_v=$($TMPDIR/core.new -v 2>/dev/null | sed 's/ linux.*//;s/.* //')
+			fi
+			if [ -z "$core_v" ];then
+				logger "任务【自动更新内核】出错-内核校验失败！"
+				rm -rf $TMPDIR/core.new
+				$CRASHDIR/start.sh start
 				return 1
 			else
-				mv -f $TMPDIR/clash.new $bindir/clash
+				mv -f $TMPDIR/core.new $bindir/CrashCore
 				logger "任务【自动更新内核】下载完成，正在重启服务！"
+				setconfig core_v $core_v
 				$CRASHDIR/start.sh start
 				return 0
 			fi
 		fi
 	fi
 }
-update_shellclash(){ #自动更新脚本
+update_shellcrash(){ #自动更新脚本
 	#检查版本
 	check_update
 	if [ -z "$versionsh" -o "$versionsh" = "versionsh_l" ];then
@@ -110,6 +115,8 @@ update_mmdb(){ #自动更新数据库
 	[ -n "${china_ip_list_v}" ] && getgeo cn_ip.txt china_ip_list.txt
 	[ -n "${china_ipv6_list_v}" ] && getgeo cn_ipv6.txt china_ipv6_list.txt
 	[ -n "${geosite_v}" ] && getgeo GeoSite.dat geosite.dat
+	[ -n "${geoip_cn_v}" ] && getgeo geoip.db geoip_cn.db
+	[ -n "${geosite_cn_v}" ] && getgeo geosite.db geosite_cn.db
 }
 reset_firewall(){ #重设透明路由防火墙
 	$CRASHDIR/start.sh stop_firewall
@@ -170,7 +177,7 @@ set_service(){
 	if [ "$1" = "running" ];then
 		task_txt="$4 $CRASHDIR/task/task.sh $2 $3"
 		echo "$task_txt" >> $task_file
-		[ -n "$(pidof clash)" ] && cronset "$3" "$task_txt"
+		[ -n "$(pidof CrashCore)" ] && cronset "$3" "$task_txt"
 	else
 		echo "$CRASHDIR/task/task.sh $2 $3" >> $task_file
 	fi
@@ -294,7 +301,7 @@ task_type(){ #任务条件选择菜单
 		echo -e " 输入 6-18 代表\033[36m早6点至晚18点间每小时\033[0m运行"		
 		read -p "想在每日的具体哪个小时执行？（0-23） > " hour		
 		echo -----------------------------------------------
-		read -p "想在具体哪分钟执行？（1-59的整数） > " min
+		read -p "想在具体哪分钟执行？（0-59的整数） > " min
 		cron_time="在每日的$hour点$min分"
 		set_cron
 	;;	
@@ -434,7 +441,7 @@ task_recom(){ #任务推荐
 	echo -----------------------------------------------
 	read -p "是否启用？(1/0) > " res	
 	[ "$res" = 1 ] && {
-		set_service running "106" "运行时每10分钟自动保存面板配置" "*/10"
+		set_service running "106" "运行时每10分钟自动保存面板配置" "*/10 * * * *"
 		set_service afstart "107" "服务启动后自动同步ntp时间" 
 		cronset "在每周3的3点整更新订阅并重启服务" "0 3 * * 3 $CRASHDIR/task/task.sh 104 在每周3的3点整更新订阅并重启服务" && \
 		echo -e "任务【在每周3的3点整更新订阅并重启服务】\033[32m添加成功！\033[0m"