v1.7.10

~配置文件覆写代码优化
~在线配置生成后端部分地址替换
~新手引导增加自动配置ipv6路由
~屏蔽QUIC功能增加ipv6支持
~修复others.yaml不会被正确读取的bug
~修复局域网过滤功能不会提示重启的bug

scripts/clash.service

@@ -5,7 +5,7 @@ After=network.target
 [Service]
 Type=simple
 User=root
-ExecStart=/etc/clash/clash -d /etc/clash >/dev/null
+ExecStart=/etc/clash/clash -d /etc/clash -f /tmp/clash_$USER/config.yaml >/dev/null
 ExecStartPost=/etc/clash/start.sh afstart
 Restart=on-failure
 RestartSec=3s

scripts/clash.sh

@@ -961,13 +961,12 @@ setboot(){
 	2)
 		if [ "$start_old" = "未开启" ] > /dev/null 2>&1; then 
 			echo -e "\033[33m改为使用保守模式启动clash服务！！\033[0m"
-			echo -e "\033[31m注意：部分设备保守模式可能无法禁用开机启动！！\033[0m"
 			start_old=已开启
 			setconfig start_old $start_old
 			$clashdir/start.sh stop
 		else
 			if [ -f /etc/init.d/clash -o -w /etc/systemd/system -o -w /usr/lib/systemd/system ];then
-				echo -e "\033[32m改为使用默认方式启动clash服务！！\033[0m"
+				echo -e "\033[32m改为使用系统守护进程启动clash服务！！\033[0m"
 				$clashdir/start.sh cronset "ShellClash初始化"
 				start_old=未开启
 				setconfig start_old $start_old
@@ -1316,7 +1315,12 @@ clashcfg(){
 		clashcfg  
 
 	elif [ "$num" = 5 ]; then	
+		checkcfg_mac=$(cat $clashdir/mac)
 		macfilter
+		if [ -n "$PID" ];then
+			checkcfg_mac_new=$(cat $clashdir/mac)
+			[ "$checkcfg_mac" != "$checkcfg_mac_new" ] && checkrestart
+		fi
 		clashcfg
 		
 	elif [ "$num" = 6 ]; then	

scripts/clashservice

@@ -10,6 +10,7 @@ DIR=$(cat /etc/profile | grep clashdir | awk -F "\"" '{print $2}')
 [ -z "$DIR" ] && DIR=$(cat ~/.bashrc | grep clashdir | awk -F "\"" '{print $2}')
 BINDIR=$(cat $DIR/mark | grep bindir | awk -F "=" '{print $2}')
 [ -z "$BINDIR" ] && BINDIR=$DIR
+TMPDIR=/tmp/clash_$USER
 
 start_service() {
 	#检测必须文件
@@ -20,7 +21,7 @@ start_service() {
 		procd_set_param respawn
 		procd_set_param stderr 0
 		procd_set_param stdout 0
-		procd_set_param command $BINDIR/clash -d $BINDIR
+		procd_set_param command $BINDIR/clash -d $BINDIR -f $TMPDIR/config.yaml
 		procd_close_instance
 		#其他设置
 		$DIR/start.sh afstart
@@ -33,7 +34,7 @@ start() {
 		$DIR/start.sh bfstart
 		if [ "$?" = "0" ];then
 			#创建后台进程
-			service_start  $BINDIR/clash -d $BINDIR
+			service_start  $BINDIR/clash -d $BINDIR -f $TMPDIR/config.yaml
 			#其他设置
 			$DIR/start.sh afstart
 			#设置守护进程

scripts/getdate.sh

@@ -539,7 +539,6 @@ setproxies(){
 	;;
 	esac
 }
-
 override(){
 	[ -z "$rule_link" ] && rule_link=1
 	[ -z "$server_link" ] && server_link=1
@@ -547,11 +546,10 @@ override(){
 	echo -e "\033[30;47m 欢迎使用配置文件覆写功能！\033[0m"
 	echo -----------------------------------------------
 	echo -e " 1 自定义\033[32m端口及秘钥\033[0m"
-	echo -e " 2 配置\033[33m内置DNS服务\033[0m"
+	echo -e " 2 管理\033[36m自定义规则\033[0m"
-	echo -e " 3 管理\033[36m自定义规则\033[0m"
+	echo -e " 3 管理\033[33m自定义节点\033[0m"
-	echo -e " 4 管理\033[33m自定义节点\033[0m"
+	echo -e " 4 管理\033[36m自定义策略组\033[0m"
-	echo -e " 5 管理\033[36m自定义策略组\033[0m"
+	echo -e " 5 \033[32m自定义\033[0m高级功能"
-	echo -e " 6 \033[32m自定义\033[0m其他功能"
 	[ "$disoverride" != 1 ] && echo -e " 9 \033[33m禁用\033[0m配置文件覆写"
 	echo -----------------------------------------------
 	[ "$inuserguide" = 1 ] || echo -e " 0 返回上级菜单"
@@ -573,24 +571,21 @@ override(){
 		override
 	;;
 	2)
-		setdns
-		override	
-	;;
-	3)
 		setrules
 		override
 	;;
-	4)
+	3)
 		setproxies
 		override
 	;;
-	5)
+	4)
 		setgroups
 		override
 	;;
-	6)
+	5)
 		[ ! -f $clashdir/user.yaml ] && cat > $clashdir/user.yaml <<EOF
-#用于编写自定义设定(可参考https://lancellc.gitbook.io/clash)
+#用于编写自定义设定(可参考https://lancellc.gitbook.io/clash/clash-config-file/general 或 https://docs.metacubex.one/function/general)
+#端口之类请在脚本中修改，否则不会加载
 #port: 7890
 EOF
 		[ ! -f $clashdir/others.yaml ] && cat > $clashdir/others.yaml <<EOF
@@ -605,9 +600,13 @@ EOF
 #script:
 #listeners:
 EOF
+		echo -----------------------------------------------
 		echo -e "\033[32m已经创建自定义设定文件：$clashdir/user.yaml ！\033[0m"
+		echo -e "\033[33m可用于编写自定义的DNS，等功能\033[0m"
+		echo -----------------------------------------------
 		echo -e "\033[32m已经创建自定义功能文件：$clashdir/others.yaml ！\033[0m"
 		echo -e "\033[33m可用于编写自定义的锚点、入站、proxy-providers、sub-rules、rule-set、script等功能\033[0m"		
+		echo -----------------------------------------------
 		echo -e "Windows下请\n使用\033[33mWinSCP软件\033[0m进行编辑！\033[0m"
 		echo -e "MacOS下请\n使用\033[33mSecureFX软件\033[0m进行编辑！\033[0m"
 		echo -e "Linux本机可\n使用\033[33mvim\033[0m进行编辑(路由设备可能不显示中文请勿使用)！\033[0m"
@@ -635,6 +634,7 @@ EOF
 	;;
 	esac
 }
+
 clashlink(){
 	[ -z "$rule_link" ] && rule_link=1
 	[ -z "$server_link" ] && server_link=1
@@ -1404,10 +1404,17 @@ userguide(){
 			errornum
 			forwhat
 		elif [ "$num" = 1 ];then
+			#设置运行模式
 			redir_mod="Redir模式"
 			ckcmd nft && redir_mod="Nft基础"
-			ckcmd nft && modprobe nft_tproxy &> /dev/null && redir_mod="Nft混合"
+			modprobe nft_tproxy &> /dev/null && redir_mod="Nft混合"
 			setconfig redir_mod "$redir_mod"
+			#自动识别IPV6
+			[ -n "$(ip a 2>&1 | grep -w 'inet6' | grep -E 'global' | sed 's/.*inet6.//g' | sed 's/scope.*$//g')" ] && {
+				setconfig ipv6_redir 已开启
+				setconfig ipv6_support 已开启
+				setconfig ipv6_dns 已开启
+			}
 			#设置开机启动
 			[ -f /etc/rc.common ] && /etc/init.d/clash enable
 			ckcmd systemctl && systemctl enable clash.service > /dev/null 2>&1
@@ -1549,7 +1556,8 @@ testcommand(){
 		$clashdir/start.sh stop
 		echo -----------------------------------------------
 		if $clashdir/clash -v &>/dev/null;then
-			$clashdir/clash -t -d $clashdir	
+			clash -s modify_yaml &>/dev/null
+			$clashdir/clash -t -d $clashdir	-f $tmpdir/config.yaml
 			[ "$?" = 0 ] && testover=32m测试通过！|| testover=31m出现错误！请截图后到TG群询问！！！
 			echo -e "\033[$testover\033[0m"
 		else

scripts/init.sh

@@ -229,6 +229,8 @@ fi
 #删除临时文件
 rm -rf /tmp/*lash*gz
 rm -rf /tmp/SC_tmp
-
+#转换&清理旧版本文件
+mkdir -p $clashdir/configs
+mkdir -p $clashdir/tools
 sleep 1
 echo -e "\033[32m脚本初始化完成,请输入\033[30;47m clash \033[0;33m命令开始使用！\033[0m"

scripts/start.sh

@@ -163,7 +163,7 @@ getyaml(){
 	#前后端订阅服务器地址索引，可在此处添加！
 	Server=`sed -n ""$server_link"p"<<EOF
 https://api.dler.io
-https://api.v1.mk
+https://sub.d1.mk
 https://sub.xeton.dev
 https://v.id9.cc
 https://sub.maoxiongnet.com
@@ -183,7 +183,7 @@ https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Ba
 EOF`
 	#如果传来的是Url链接则合成Https链接，否则直接使用Https链接
 	if [ -z "$Https" ];then
-		[ -n "$(echo $Url | grep -oE 'vless:')" -a -z "$retry" ] && Server='https://api.v1.mk'
+		[ -n "$(echo $Url | grep -oE 'vless:')" -a -z "$retry" ] && Server='https://sub.d1.mk'
 		[ -n "$(echo $Url | grep -oE 'hysteria:')" -a -z "$retry" ] && Server='https://sub.jwsc.eu.org'
 		Https="$Server/sub?target=clash&insert=true&new_name=true&scv=true&udp=true&exclude=$exclude&include=$include&url=$Url&config=$Config"
 		url_type=true
@@ -334,9 +334,6 @@ modify_yaml(){
 	
 	#设置目录
 	yaml=$clashdir/config.yaml
-	#预读取变量
-	mode=$(grep "^mode" $yaml | head -1 | awk '{print $2}')
-	[ -z "$mode" ] && mode='Rule'
 	#分割配置文件
 	yaml_char='proxies proxy-groups proxy-providers rules rule-providers'
 	for char in $yaml_char;do
@@ -457,28 +454,32 @@ EOF
 	fi
 	#合并文件
 	[ -s $clashdir/user.yaml ] && yaml_user=$clashdir/user.yaml
-	for char in $yaml_char;do
+	[ -s $tmpdir/hosts.yaml ] && yaml_hosts=$tmpdir/hosts.yaml
+	[ -s $tmpdir/others.yaml ] && yaml_others=$clashdir/others.yaml
+	yaml_add=
+	for char in $yaml_char;do #将额外配置文件合并
 		[ -s $tmpdir/${char}.yaml ] && {
 			sed -i "1i\\${char}:" $tmpdir/${char}.yaml
 			yaml_add="$yaml_add $tmpdir/${char}.yaml"
 		}
 	done	
-	cut -c 1- $tmpdir/set.yaml $yaml_hosts $yaml_user $yaml_add > $tmpdir/config.yaml
+	cut -c 1- $tmpdir/set.yaml $yaml_hosts $yaml_user $yaml_others $yaml_add > $tmpdir/config.yaml
 	#测试自定义配置文件
 	$bindir/clash -t -d $bindir -f $tmpdir/config.yaml >/dev/null
 	if [ "$?" != 0 ];then
 		logger "$($bindir/clash -t -d $bindir -f $tmpdir/config.yaml | grep -Eo 'error.*=.*')" 31
 		logger "自定义配置文件校验失败！将使用基础配置文件启动！" 33
-		sed -i "/#自定义策略组开始/,/#自定义策略组结束/d"  $tmpdir/config.yaml 
+		sed -i "/#自定义策略组开始/,/#自定义策略组结束/d"  $tmpdir/proxy-groups.yaml  
-		sed -i "/#自定义/d" $tmpdir/config.yaml  
+		cut -c 1- $tmpdir/set.yaml $yaml_add > $tmpdir/config.yaml
+		sed -i "/#自定义/d" $tmpdir/config.yaml 
 	fi
 	#存档
-	if [ "$clashdir" = "$bindir" ];then
+	# if [ "$clashdir" = "$bindir" ];then
-		cmp -s $tmpdir/config.yaml $yaml >/dev/null 2>&1
+		# cmp -s $tmpdir/config.yaml $yaml >/dev/null 2>&1
-		[ "$?" != 0 ] && mv -f $tmpdir/config.yaml $yaml || rm -f $tmpdir/config.yaml
+		# [ "$?" != 0 ] && mv -f $tmpdir/config.yaml $yaml || rm -f $tmpdir/config.yaml
-	elif [ "$tmpdir" != "$bindir" ];then
+	# elif [ "$tmpdir" != "$bindir" ];then
-		mv -f $tmpdir/config.yaml $bindir/config.yaml
+		# mv -f $tmpdir/config.yaml $bindir/config.yaml
-	fi
+	# fi
 	#清理缓存
 	for char in $yaml_char set hosts;do
 		rm -f $tmpdir/${char}.yaml
@@ -740,9 +741,12 @@ start_tun(){
 	ip6tables -I FORWARD -o utun -j ACCEPT > /dev/null 2>&1
 	#屏蔽QUIC
 	if [ "$quic_rj" = 已启用 ];then
-		[ "$dns_mod" = "redir_host" -a "$cn_ip_route" = "已开启" ] && set_cn_ip='-m set ! --match-set cn_ip dst'
+		[ "$dns_mod" = "redir_host" -a "$cn_ip_route" = "已开启" ] && {
+			set_cn_ip='-m set ! --match-set cn_ip dst'
+			set_cn_ip6='-m set ! --match-set cn_ip6 dst'
+		}
 		iptables -I FORWARD -p udp --dport 443 -o utun -m comment --comment "ShellClash-QUIC-REJECT" $set_cn_ip -j REJECT >/dev/null 2>&1 
-		#ip6tables -I FORWARD -p udp --dport 443 -o utun -m comment --comment "ShellClash-QUIC-REJECT" -j REJECT >/dev/null 2>&1
+		ip6tables -I FORWARD -p udp --dport 443 -o utun -m comment --comment "ShellClash-QUIC-REJECT" $set_cn_ip6 -j REJECT >/dev/null 2>&1
 	fi
 	modprobe xt_mark &>/dev/null && {
 		i=1
@@ -1220,7 +1224,7 @@ bfstart(){
 				[ -z "$(grep 'procd_set_param user shellclash' /etc/init.d/clash)" ] && \
     			sed -i '/procd_close_instance/i\\t\tprocd_set_param user shellclash' /etc/init.d/clash
 			elif [ -w "$servdir" ]; then
-				setconfig ExecStart "/bin/su shellclash -c \"$bindir/clash -d $bindir >/dev/null\"" $servdir
+				setconfig ExecStart "/bin/su shellclash -c \"$bindir/clash -d $bindir -f $tmpdir/config.yaml >/dev/null\"" $servdir
 				systemctl daemon-reload >/dev/null
 			fi
 		fi
@@ -1297,10 +1301,10 @@ start_old(){
 	#使用传统后台执行二进制文件的方式执行
 	if [ "$local_proxy" = "已开启" -a -n "$(echo $local_type | grep '增强模式')" ];then
 		ckcmd su && su=su
-		$su shellclash -c "$bindir/clash -d $bindir >/dev/null" &
+		$su shellclash -c "$bindir/clash -d $bindir -f $tmpdir/config.yaml >/dev/null" &
 	else
 		ckcmd nohup && nohup=nohup
-		$nohup $bindir/clash -d $bindir >/dev/null 2>&1 &
+		$nohup $bindir/clash -d $bindir -f $tmpdir/config.yaml >/dev/null 2>&1 &
 	fi
 	afstart
 	$0 daemon
@@ -1321,7 +1325,7 @@ start)
 		bfstart
 		stop_firewall #清理路由策略
 		#使用内置规则强行覆盖config配置文件
-		[ "$disoverride" != "1" ] && modify_yaml
+		[ "$disoverride" != "1" ] && modify_yaml || ln -s $clashdir/config.yaml $tmpdir/config.yaml
 		#使用不同方式启动clash服务
 		if [ "$start_old" = "已开启" ];then
 			start_old