Merge branch 'master' into dev

# Conflicts:
#	ShellCrash.tar.gz
#	bin/version
#	version

scripts/libs/core_tools.sh

@@ -72,8 +72,11 @@ core_webget(){
 		[ -z "$zip_type" ] && zip_type='tar.gz'
 		get_bin "$TMPDIR/Coretmp.$zip_type" "bin/$crashcore/${target}-linux-${cpucore}.$zip_type"
 	else
-		zip_type=$(echo "$custcorelink" | grep -oE 'tar.gz$')
+		case "$custcorelink" in
-		[ -z "$zip_type" ] && zip_type=$(echo "$custcorelink" | grep -oE 'gz$')
+			*.tar.gz) zip_type="tar.gz" ;;
+			*.gz)     zip_type="gz" ;;
+			*.upx)    zip_type="upx" ;;
+		esac
 		[ -n "$zip_type" ] && webget "$TMPDIR/Coretmp.$zip_type" "$custcorelink"
 	fi
 	#校验内核

scripts/menus/7_gateway.sh

@@ -225,6 +225,7 @@ set_bot_tg() {
         comp_box "\033[31m注意：\033[0m由于网络环境原因，此机器人仅限服务启动时运行！"
         btm_box "1) 启用／关闭TG-BOT服务	\033[32m$bot_tg_service\033[0m" \
             "2) TG-BOT绑定设置	\033[32m$TG_CHATID_info\033[0m" \
+			"3) 启动时推送菜单	\033[32m$TG_menupush\033[0m" \
             "" \
             "0) 返回上级菜单"
         read -r -p "请输入对应标号> " num
@@ -255,6 +256,15 @@ set_bot_tg() {
             fi
             set_bot_tg_init
             ;;
+        3)
+            if [ "$TG_menupush" = ON ];then
+                TG_menupush=OFF
+            else
+                TG_menupush=ON
+            fi
+            setconfig TG_menupush "$TG_menupush" "$GT_CFG_PATH"
+            set_bot_tg
+	;;
         *)
             errornum
             ;;

scripts/menus/9_upgrade.sh

@@ -440,7 +440,7 @@ setcustcore() {
             ;;
         9)
             comp_box "请输入自定义内核的链接地址" \
-                "（必须是以.tar.gz或.gz结尾的压缩文件）" \
+                "（必须是以.tar.gz、.upx或.gz结尾的压缩文件）" \
                 "" \
                 "或者输入 0 返回上级菜单"
             read -r -p "请输入> " link
@@ -495,7 +495,7 @@ setcore() {
         [ -z "$crashcore" ] && crashcore="unknow"
         [ -z "$zip_type" ] && zip_type="tar.gz"
         echo "$crashcore" | grep -q 'singbox' && core_old=singbox || core_old=clash
-        [ -n "$custcorelink" ] && custcore="$(echo "$custcorelink" | sed 's#.*github.com##; s#/releases/download/#@#; s#-linux.*$##')"
+        [ -n "$custcorelink" ] && custcore="$(echo "$custcorelink" | sed 's#.*github.com##; s#/releases/download/#@#')"
 
         [ -z "$cpucore" ] && check_cpucore
 

scripts/menus/bot_tg.sh

@@ -320,7 +320,7 @@ polling(){
 	done
 }
 
-#send_menu
+[ "$TG_menupush" = ON ] && send_menu
 
 polling
 

scripts/menus/fw_filter.sh

@@ -15,7 +15,7 @@ set_fw_filter() {
         comp_box "1) 过滤非常用端口： 	\033[36m$common_ports\033[0m	———用于过滤P2P流量" \
             "2) 过滤局域网设备：	\033[36m$mac_return\033[0m	———使用黑/白名单进行过滤" \
             "3) 过滤QUIC协议：	\033[36m$quic_rj\033[0m	———优化视频性能" \
-            "4) 过滤CN_IP(4/6)列表：\033[36m$cn_ip_route\033[0m	———优化性能" \
+            "4) 过滤CN_IP(4&6)列表：\033[36m$cn_ip_route\033[0m	———优化性能" \
             "5) 自定义透明路由ipv4网段：适合vlan等复杂网络环境" \
             "6) 自定义保留地址ipv4网段：需要以保留地址为访问目标的环境" \
             "" \

scripts/starts/clash_check.sh

@@ -11,10 +11,10 @@ clash_check() { #clash启动前检查
     [ "$crashcore" = "clash" ] && [ "$firewall_area" = 2 -o "$firewall_area" = 3 ] && [ -z "$(grep '0:7890' /etc/passwd)" ] &&
         core_exchange meta '当前内核不支持非root用户启用本机代理'
     check_core
-    #预下载GeoIP数据库并排除存在自定义数据库链接的情况
+    #预下载GeoIP数据库
-    [ -n "$(grep -oEi 'geoip:' "$CRASHDIR"/yamls/config.yaml)" ] && check_geo Country.mmdb cn_mini.mmdb
+    grep -qEi 'GEOIP,CN' "$CRASHDIR"/yamls/config.yaml && ! grep -Eq '^[[:space:]]*geodata-mode:' "$CRASHDIR"/yamls/*.yaml && check_geo Country.mmdb cn_mini.mmdb
-    #预下载GeoSite数据库并排除存在自定义数据库链接的情况
+    #预下载GeoSite数据库
-    [ -n "$(grep -oEi 'geosite:' "$CRASHDIR"/yamls/config.yaml)" ] && check_geo GeoSite.dat geosite.dat
+    grep -qEi 'GEOSITE,' "$CRASHDIR"/yamls/config.yaml && ! grep -Eq '^[[:space:]]*geosite:' "$CRASHDIR"/yamls/*.yaml && check_geo GeoSite.dat geosite.dat
     #预下载cn.mrs数据库
     [ "$dns_mod" = "mix" ] || [ "$dns_mod" = "route" ] && ! grep -Eq '^[[:space:]]*cn:' "$CRASHDIR"/yamls/*.yaml && check_geo ruleset/cn.mrs mrs_geosite_cn.mrs
     return 0