~添加ss和vmess入站支持

scripts/menus/endpoints.sh

@@ -1,69 +0,0 @@
-#!/bin/sh
-# Copyright (C) Juewuy
-
-[ "$ts_service" = ON ] && {
-	[ "$ts_subnet" = true ] && advertise_routes='"10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"'
-	[ -z "$ts_exit_node" ] && ts_exit_node=false
-	cat >"$TMPDIR"/jsons/tailscale.json <<EOF
-{
-  "endpoints": [
-    {
-	  "type": "tailscale",
-	  "tag": "ts-ep",
-	  "state_directory": "/tmp/ShellCrash/tailscale",
-	  "auth_key": "$ts_auth_key",
-	  "hostname": "ShellCrash-ts-ep",
-	  "advertise_routes": [$advertise_routes],
-	  "advertise_exit_node": $ts_exit_node,
-	  "udp_timeout": "5m"
-    }
-  ]
-}
-EOF
-}
-
-[ "$wg_service" = ON ] && {
-	echo "$crashcore" | grep -q 'singbox' && {
-		[ -n "$wg_ipv6" ] && wg_ipv6_add=", \"$wg_ipv6\""
-		cat >"$TMPDIR"/jsons/wireguard.json <<EOF
-{
-  "endpoints": [
-	{
-	  "type": "wireguard",
-	  "tag": "wg-ep",
-	  "system": true,
-	  "mtu": 1420,
-	  "address": [ "$wg_ipv4"$wg_ipv6_add ],
-	  "private_key": "$wg_private_key",
-	  "peers": [
-		{
-		  "address": "$wg_server",
-		  "port": $wg_port,
-		  "public_key": "$wg_public_key",
-		  "pre_shared_key": "$wg_pre_shared_key",
-		  "allowed_ips": ["0.0.0.0/0", "::/0"]
-		}
-	  ]
-	}
-  ]
-}
-EOF
-	}
-	#meta内核wg生成
-	echo "$crashcore" | grep -q 'meta' && {
-		cat >"$TMPDIR"/yamls/wireguard.yaml <<EOF
-- name: "wg"
-  type: wireguard
-  private-key: $wg_private_key
-  server: $wg_server
-  port: $wg_port
-  ip: $wg_ipv4
-  ipv6: $wg_ipv6
-  public-key: $wg_public_key
-  allowed-ips: ['0.0.0.0/0', '::/0']
-  pre-shared-key: $wg_pre_shared_key
-  mtu: 1420
-  udp: true
-EOF
-	}
-}

scripts/menus/gateway.sh

@@ -4,7 +4,7 @@
 CFG="$CRASHDIR"/configs/gateway.cfg
 . "$CFG"
 
-gateway(){
+gateway(){ #访问与控制主菜单
 	echo -----------------------------------------------
 	echo -e "\033[30;47m欢迎使用访问与控制菜单：\033[0m"
 	echo -----------------------------------------------
@@ -182,11 +182,11 @@ set_bot_tg(){
 	esac		
 }
 set_ddns(){
-	echo
+	echo 等待施工
 }
 set_vmess(){
 	echo -----------------------------------------------
-	echo -e "\033[31m注意：\033[0m启动内核服务后会自动开放相应端口公网访问，请谨慎使用！"
+	echo -e "\033[31m注意：\033[0m启动内核服务后会自动开放相应端口公网访问，请谨慎使用！\n      脚本只提供基础功能，更多需求请使用自定义配置文件功能！"
 	echo -----------------------------------------------
 	echo -e " 1 \033[32m启用/关闭\033[0mVmess入站	\033[32m$vms_service\033[0m"
 	echo -----------------------------------------------
@@ -253,6 +253,109 @@ set_vmess(){
 	*) errornum ;;
 	esac		
 }
+set_shadowsocks(){
+	[ -z "$sss_cipher" ] && sss_cipher='xchacha20-ietf-poly1305'
+	echo -----------------------------------------------
+	echo -e "\033[31m注意：\033[0m启动内核服务后会自动开放相应端口公网访问，请谨慎使用！\n      脚本只提供基础功能，更多需求请使用自定义配置文件功能！"
+	echo -----------------------------------------------
+	echo -e " 1 \033[32m启用/关闭\033[0mShadowSocks入站	\033[32m$sss_service\033[0m"
+	echo -----------------------------------------------
+	echo -e " 2 设置\033[36m监听端口\033[0m：	\033[36m$sss_port\033[0m"
+	echo -e " 3 选择\033[33m加密协议\033[0m：	\033[33m$sss_cipher\033[0m"
+	echo -e " 4 设置\033[36mpassword\033[0m：	\033[36m$sss_pwd\033[0m"
+	echo -e " 0 返回上级菜单 \033[0m"
+	echo -----------------------------------------------
+	read -p "请输入对应数字 > " num
+	case "$num" in
+	0) ;;
+	1)
+		if [ -n "$sss_port" ] && [ -n "$sss_pwd" ];then
+			[ "$sss_service" = ON ] && sss_service=OFF || sss_service=ON
+			setconfig sss_service "$sss_service"
+		else
+			echo -e "\033[31m请先完成必选设置！\033[0m"
+			sleep 1
+		fi
+		set_shadowsocks
+	;;
+	2)
+		read -p "请输入端口号(输入0删除) > " text
+		[ "$text" = 0 ] && unset sss_port
+		if sh "$CRASHDIR"/libs/check_port.sh "$text"; then
+			sss_port="$text"
+			setconfig sss_port "$text" "$CFG"
+		else
+			sleep 1
+		fi
+		set_shadowsocks
+	;;
+	3)
+		echo -----------------------------------------------
+		echo -e " 1 \033[32mxchacha20-ietf-poly1305\033[0m"
+		echo -e " 2 \033[32mchacha20-ietf-poly1305\033[0m"
+		echo -e " 3 \033[32maes-128-gcm\033[0m"
+		echo -e " 4 \033[32maes-256-gcm\033[0m"
+		ckcmd openssl && {
+			echo -----------------------------------------------
+			echo -e "\033[31m注意：\033[0m2022系列加密必须使用OpenSSL随机生成的password！"
+			echo -e " 5 \033[32m2022-blake3-chacha20-poly1305\033[0m"
+			echo -e " 6 \033[32m2022-blake3-aes-128-gcm\033[0m"
+			echo -e " 7 \033[32m2022-blake3-aes-256-gcm\033[0m"
+		}
+		echo -----------------------------------------------
+		echo -e " 0 返回上级菜单"
+		read -p "请选择要使用的加密协议 > " num
+		case "$num" in
+		1)
+			sss_cipher=xchacha20-ietf-poly1305
+			sss_pwd=$(cat /proc/sys/kernel/random/uuid)
+		;;
+		2)
+			sss_cipher=chacha20-ietf-poly1305
+			sss_pwd=$(cat /proc/sys/kernel/random/uuid)
+		;;
+		3)
+			sss_cipher=aes-128-gcm
+			sss_pwd=$(cat /proc/sys/kernel/random/uuid)
+		;;
+		4)
+			sss_cipher=aes-256-gcm
+			sss_pwd=$(cat /proc/sys/kernel/random/uuid)
+		;;
+		5)
+			sss_cipher=2022-blake3-chacha20-poly1305
+			sss_pwd=$(openssl rand --base64 32)
+		;;
+		6)
+			sss_cipher=2022-blake3-aes-128-gcm
+			sss_pwd=$(openssl rand --base64 16)
+		;;
+		7)
+			sss_cipher=2022-blake3-aes-256-gcm
+			sss_pwd=$(openssl rand --base64 32)
+		;;
+		*)
+		;;
+		esac
+		setconfig sss_cipher "$sss_cipher" "$CFG"
+		setconfig sss_pwd "$sss_pwd" "$CFG"
+		set_shadowsocks
+	;;
+	4)
+		if echo "$sss_cipher" |grep -q '2022-blake3';then
+			echo -e "\033[31m注意：\033[0m2022系列加密必须使用脚本随机生成的password！"
+			sleep 1
+		else
+			read -p "请输入秘钥(输入0删除) > " text
+			[ "$text" = 0 ] && unset sss_pwd
+			sss_pwd="$text"
+			setconfig sss_pwd "$text" "$CFG"
+		fi
+		set_shadowsocks
+	;;
+	*) errornum ;;
+	esac		
+}
 set_tailscale(){
 	[ -n "$ts_auth_key" ] && ts_auth_key_info='*********'
 	echo -----------------------------------------------