chore: invoke the common.sh componen and UI adjustments

2026-03-11 16:01:28 +00:00 · 2026-02-03 20:40:02 +08:00
parent 901b4b30c0
commit 6e83081865
13 changed files with 159 additions and 199 deletions
--- a/scripts/menus/2_settings.sh
+++ b/scripts/menus/2_settings.sh
@@ -28,11 +28,11 @@ settings() {
        }
        content_line "8) $SET_MENU_IPV6\t\033[36m$ipv6_redir\033[0m"
        separator_line "-"
-        content_line "a) \033[31m$SET_MENU_RESET\033[0m"
-        content_line "b) \033[36m$SET_MENU_LANG\033[0m"
-        content_line "c) \033[33m$SET_MENU_UI\033[0m"
-        content_line "0) $COMMON_BACK"
-        separator_line "="
+        btm_box "a) \033[31m$SET_MENU_RESET\033[0m" \
+            "b) \033[36m$SET_MENU_LANG\033[0m" \
+            "c) \033[33m$SET_MENU_UI\033[0m" \
+            "" \
+            "0) $COMMON_BACK"
        read -r -p "$COMMON_INPUT> " num
        case "$num" in
        "" | 0)
@@ -204,7 +204,7 @@ settings() {
            ;;
        b)
            comp_box "1) 简体中文" \
-            "2) English" \
+                "2) English" \
                "" \
                "0) $COMMON_BACK"
            read -r -p "$COMMON_INPUT> " num
@@ -280,12 +280,11 @@ set_redir_mod() {
            content_line "6) \033[36mT&U旁路转发\033[0m：    转发TCP&UDP流量至旁路由"
            content_line ""
        }
-        content_line "7) $SET_FW_AREA：\t\033[47;30m$firewall_area_dsc\033[0m"
-        content_line "8) $SET_VM_REDIR：\t\033[47;30m$vm_redir\033[0m"
-        content_line "9) $SET_FW_SWITCH：\t\033[47;30m$firewall_mod\033[0m"
-        content_line ""
-        content_line "0) $COMMON_BACK"
-        separator_line "="
+        btm_box "7) $SET_FW_AREA：\t\033[47;30m$firewall_area_dsc\033[0m" \
+            "8) $SET_VM_REDIR：\t\033[47;30m$vm_redir\033[0m" \
+            "9) $SET_FW_SWITCH：\t\033[47;30m$firewall_mod\033[0m" \
+            "" \
+            "0) $COMMON_BACK"
        read -r -p "$COMMON_INPUT> " num
        case "$num" in
        "" | 0)
--- a/scripts/menus/4_setboot.sh
+++ b/scripts/menus/4_setboot.sh
@@ -43,10 +43,9 @@ setboot() {
        content_line "3) 设置自启延时：   \033[36m$(printf '%-7s' "$delay")\033[0m ———用于解决自启后服务受限"
        content_line "4) 启用小闪存模式： \033[36m$(printf '%-4s' "$mini_clash")\033[0m   ———用于闪存空间不足的设备"
        [ "${BINDIR}" != "$CRASHDIR" ] && content_line "5) 设置小闪存目录： \033[36m${BINDIR}\033[0m"
-        content_line "6) 自启网络检查：   \033[36m$(printf '%-4s' "$network_check")\033[0m   ———禁用则跳过自启时网络检查"
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "6) 自启网络检查：   \033[36m$(printf '%-4s' "$network_check")\033[0m   ———禁用则跳过自启时网络检查" \
+            "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应标号> " num
        case "$num" in
        "" | 0)
@@ -216,9 +215,8 @@ setboot() {
                content_line "当前\033[33m已启用\033[0m自启网络检查，是否确认禁用？"
            fi
            separator_line "-"
-            content_line "1) 是"
-            content_line "0) 否，返回上级菜单"
-            separator_line "="
+            btm_box "1) 是" \
+                "0) 否，返回上级菜单"
            read -r -p "请输入对应标号> " res
            if [ "$res" = '1' ]; then
                if [ "$network_check" = "OFF" ]; then
--- a/scripts/menus/5_task.sh
+++ b/scripts/menus/5_task.sh
@@ -88,9 +88,8 @@ task_user_del() {
                while IFS= read -r line; do
                    content_line "$line"
                done
-            content_line ""
-            content_line "0) 返回上级菜单"
-            separator_line "="
+            btm_box "" \
+                "0) 返回上级菜单"
            read -r -p "请输入对应标号> " num
            if [ "$num" = 0 ]; then
                break
@@ -114,9 +113,8 @@ task_add() {
        # 输出任务列表
        list=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep -Ev '^(#|$)' | awk -F '#' '{print $3}')
        list_box "$list"
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应标号> " num
        case "$num" in
        0)
@@ -179,7 +177,6 @@ task_type() {
            "输入 1～5 代表\033[36m周一至周五\033[0m运行"
        read -r -p "在每周哪天执行？> " week
        # week=`echo ${week/7/0}` # 把7换成0
-        echo
        read -r -p "想在该日的具体哪个小时执行？（0～23）> " hour
        cron_time="在每周$week的$hour点整"
        # cron_time=`echo ${cron_time/周0/周日}` # 把0换成日
@@ -189,7 +186,6 @@ task_type() {
        comp_box "输入 1，7，15 代表\033[36m每到1，7，15点\033[0m运行" \
            "输入 6～18 代表\033[36m早6点至晚18点间每小时\033[0m运行"
        read -r -p "想在每日的具体哪个小时执行？（0~23）> " hour
-        echo
        read -r -p "想在具体哪分钟执行？（0～59的整数）> " min
        cron_time="在每日的$hour点$min分"
        [ -n "$min" ] && [ -n "$hour" ] && set_cron
--- a/scripts/menus/6_core_config.sh
+++ b/scripts/menus/6_core_config.sh
@@ -34,13 +34,13 @@ set_core_config() {
            list_box "$list"
            separator_line "-"
        }
-        content_line "a) \033[32m添加提供者\033[0m（支持订阅/分享链接及本地文件）"
-        content_line "b) \033[36m本地生成配置文件\033[0m"
-        content_line "c) \033[33m在线生成配置文件\033[0m"
-        content_line "d) \033[31m清空提供者列表\033[0m"
-        content_line "e) \033[36m自定义配置文件\033[0m"
-        content_line ""
-        common_back
+        btm_box "a) \033[32m添加提供者\033[0m（支持订阅/分享链接及本地文件）" \
+            "b) \033[36m本地生成配置文件\033[0m" \
+            "c) \033[33m在线生成配置文件\033[0m" \
+            "d) \033[31m清空提供者列表\033[0m" \
+            "e) \033[36m自定义配置文件\033[0m" \
+            "" \
+            "0) $COMMON_BACK"
        read -r -p "$COMMON_INPUT_L> " num
        case "$num" in
        "" | 0)
@@ -94,7 +94,6 @@ set_core_config() {
                [ "$checkcfg" != "$checkcfg_new" ] && checkrestart
            fi
            ;;
-
        *)
            error_letter
            ;;
@@ -140,8 +139,8 @@ setproviders() {
        content_line ""
        content_line "a) \033[36m保存此提供者\033[0m"
        content_line "d) \033[31m删除此提供者\033[0m"
-		content_line ""
-		content_line "\033[36m以下方式的详细配置请前往对应功能页面进行设置！\033[0m"
+        content_line ""
+        content_line "\033[36m以下方式的详细配置请前往对应功能页面进行设置！\033[0m"
        [ -n "$link" ] &&
            content_line "b) \033[32m本地生成\033[0m仅包含此提供者的配置文件"
        echo "$link$link_uri" | grep -q '://' &&
@@ -150,8 +149,8 @@ setproviders() {
            content_line "e) 在线获取此配置文件（不使用订阅转换）"
        echo "$link" | grep -q '^./providers' &&
            content_line "e) 直接使用此文件作为配置文件（不使用本地生成）"
-        content_line ""
-        common_back
+        btm_box "" \
+            "0) $COMMON_BACK"
        read -r -p "请输入对应字母或数字> " input
        case "$input" in
        "" | 0)
@@ -274,7 +273,7 @@ setproviders() {
            ;;
        d)
            if [ -n "$name" ] && [ -n "$link" ]; then
-                sed -i "/^$name /d" "$CRASHDIR"/configs/providers.cfg 2>/dev/null 
+                sed -i "/^$name /d" "$CRASHDIR"/configs/providers.cfg 2>/dev/null
                msg_alert "\033[32m$COMMON_SUCCESS\033[0m"
            elif [ -n "$name" ] && [ -n "$link_uri" ]; then
                sed -i "/^$name /d" "$CRASHDIR"/configs/providers_uri.cfg 2>/dev/null
@@ -341,16 +340,14 @@ saveproviders() {
 # 本地生成覆写
 custproviders() {
    while true; do
-        line_break
-        separator_line "="
-        content_line "1) 设置\033[33m健康检查间隔\033[0m：\t\033[47;30m$interval\033[0m 分钟"
-        content_line "2) 设置\033[36m自动更新间隔\033[0m：\t\033[47;30m$interval2\033[0m 小时"
+        top_box "1) 设置\033[33m健康检查间隔\033[0m：\t\033[47;30m$interval\033[0m 分钟" \
+            "2) 设置\033[36m自动更新间隔\033[0m：\t\033[47;30m$interval2\033[0m 小时"
        echo "$link" | grep -q '^http' &&
            content_line "3) 设置\033[33m虚拟浏览器UA\033[0m：\t\033[47;30m$ua\033[0m"
-        content_line "4) 设置\033[31m排除节点正则\033[0m：\t\033[47;30m$exclude_w\033[0m"
-        content_line "5) 设置\033[32m包含节点正则\033[0m：\t\033[47;30m$include_w\033[0m"
-        content_line ""
-        common_back
+        btm_box "4) 设置\033[31m排除节点正则\033[0m：\t\033[47;30m$exclude_w\033[0m" \
+            "5) 设置\033[32m包含节点正则\033[0m：\t\033[47;30m$include_w\033[0m" \
+            "" \
+            "0) $COMMON_BACK"
        read -r -p "请输入对应数字> " num
        case "$num" in
        "" | 0)
--- a/scripts/menus/7_gateway.sh
+++ b/scripts/menus/7_gateway.sh
@@ -21,9 +21,8 @@ gateway() {
            content_line "6) 配置\033[36mTailscale内网穿透\033[0m（限Singbox）	\033[32m$ts_service\033[0m"
            content_line "7) 配置\033[36mWireguard客户端\033[0m（限Singbox）	\033[32m$wg_service\033[0m"
        }
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应标号> " num
        case "$num" in
        "" | 0)
@@ -277,10 +276,9 @@ set_vmess() {
        content_line "5) 一键生成\033[32m随机秘钥\033[0m"
        gen_base64 1 >/dev/null 2>&1 &&
            content_line "6) 设置\033[36m混淆host（可选）\033[0m：	\033[33m$vms_host\033[0m"
-        content_line "7) 一键生成\033[32m分享链接\033[0m"
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "7) 一键生成\033[32m分享链接\033[0m" \
+            "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应标号> " num
        case "$num" in
        "" | 0)
@@ -402,9 +400,8 @@ set_shadowsocks() {
        content_line "4) 设置\033[36mpassword\033[0m：	\033[36m$sss_pwd\033[0m"
        gen_base64 1 >/dev/null 2>&1 &&
            content_line "5) 一键生成分享链接"
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应标号> " num
        case "$num" in
        "" | 0)
@@ -450,9 +447,8 @@ set_shadowsocks() {
                content_line "6) \033[32m2022-blake3-aes-128-gcm\033[0m"
                content_line "7) \033[32m2022-blake3-aes-256-gcm\033[0m"
            }
-            content_line ""
-            content_line "0) 返回上级菜单"
-            separator_line "="
+            btm_box "" \
+                "0) 返回上级菜单"
            read -r -p "请输入对应标号> " num
            case "$num" in
            0) ;;
--- a/scripts/menus/8_tools.sh
+++ b/scripts/menus/8_tools.sh
@@ -90,9 +90,8 @@ tools() {
        [ -x /usr/sbin/otapredownload ] && content_line "5) \033[33m$mi_update\033[0m小米系统自动更新"
        [ "$systype" = "mi_snapshot" ] && content_line "6) 小米设备软固化SSH ———— \033[$mi_mi_autoSSH_type \033[0m"
        [ "$systype" = "mi_snapshot" ] && content_line "8) 小米设备Tun模块修复 ———— \033[$mi_tunfix \033[0m"
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应标号> " num
        case "$num" in
        "" | 0)
@@ -371,28 +370,30 @@ log_pusher() {
                # echo -e "\033[33m详细设置指南请参考 https://juewuy.github.io/ \033[0m"
                comp_box "请先通过 \033[32;4mhttps://pushover.net/\033[0m 注册账号并获取\033[36mUser Key\033[0m" \
                    "" \
-                    "\033[33m请直接请输入你的User Key\033[0m" \
+                    "\033[36m请直接请输入你的User Key\033[0m" \
                    "或输入 0 返回上级菜单"
                read -r -p "请输入> " key
                if [ "$key" = 0 ]; then
                    continue
                elif [ -n "$key" ]; then
-                    line_break
-                    separator_line "="
-                    content_line "\033[33m请检查注册邮箱，完成账户验证\033[0m"
-                    read -r -p "我已经验证完成(1/0)> "
-                    separator_line "="
-
-                    comp_box "请通过 \033[32;4mhttps://pushover.net/apps/build\033[0m 生成\033[36mAPI Token\033[0m"
-                    read -r -p "请输入你的API Token> " Token
-                    if [ -n "$Token" ]; then
-                        push_Po=$Token
-                        push_Po_key=$key
-                        setconfig push_Po "$Token"
-                        setconfig push_Po_key "$key"
-                        logger "已完成Passover日志推送设置！" 32
+                    comp_box "\033[33m请检查注册邮箱，完成账户验证\033[0m"
+                    btm_box "1) 我已经验证完成" \
+                        "0) 返回上级菜单"
+                    read -r -p "我已经验证完成(1/0)> " res
+                    if [ "$res" = 1 ]; then
+                        comp_box "请通过 \033[32;4mhttps://pushover.net/apps/build\033[0m 生成\033[36mAPI Token\033[0m"
+                        read -r -p "请输入你的API Token> " Token
+                        if [ -n "$Token" ]; then
+                            push_Po=$Token
+                            push_Po_key=$key
+                            setconfig push_Po "$Token"
+                            setconfig push_Po_key "$key"
+                            logger "已完成Passover日志推送设置！" 32
+                        else
+                            msg_alert "\033[31m输入错误，请重新输入！\033[0m"
+                        fi
                    else
-                        msg_alert "\033[31m输入错误，请重新输入！\033[0m"
+                        continue
                    fi
                else
                    msg_alert "\033[31m输入错误，请重新输入！\033[0m"
@@ -443,7 +444,6 @@ log_pusher() {
            else
                line_break
                read -r -p "请输入你的Synology DSM主页地址> " URL
-                line_break
                read -r -p "请输入你的Synology Chat Token> " TOKEN
                comp_box '请通过"你的群晖地址/webapi/entry.cgi?api=SYNO.Chat.External&method=user_list&version=2&token=你的TOKEN"获取user_id'
                read -r -p "请输入你的user_id> " USERID
@@ -500,7 +500,6 @@ log_pusher() {
                line_break
                echo "==========================================================="
                cat "$TMPDIR"/ShellCrash.log
-                echo ""
                echo "==========================================================="
            else
                msg_alert "\033[31m未找到相关日志！\033[0m"
@@ -660,9 +659,8 @@ debug() {
    content_line ""
    content_line "8) 后台运行完整启动流程,输出执行错误并查找上下文，之后关闭进程"
    [ -s "$TMPDIR"/jsons/inbounds.json ] && content_line "9) 将\033[32m$config_tmp\033[0m下json文件合并为$TMPDIR/debug.json"
-    content_line ""
-    content_line "0) 返回上级目录"
-    separator_line "="
+    btm_box "" \
+        "0) 返回上级目录"
    read -r -p "请输入对应标号> " num
    case "$num" in
    0) ;;
--- a/scripts/menus/9_upgrade.sh
+++ b/scripts/menus/9_upgrade.sh
@@ -363,10 +363,8 @@ checkcustcore() {
                while IFS= read -r line; do
                    content_line "$line"
                done
-
-            content_line ""
-            content_line "0) 返回上级菜单"
-            separator_line "="
+            btm_box "" \
+                "0) 返回上级菜单"
            read -r -p "请输入对应标号> " num
            case "$num" in
            0)
@@ -530,13 +528,12 @@ setcore() {
            content_line "4) \033[43;30mClash\033[0m：\033[32m$clash_v \033[32m占用低\033[0m \033[33m不安全,已停止维护\033[0m"
            sub_content_line "说明文档：\033[36;4mhttps://lancellc.gitbook.io\033[0m"
        }
-        content_line "5) 切换版本分支及压缩方式：\033[32m$zip_type\033[0m"
-        content_line "6) \033[36m使用自定义内核\033[0m $custcore"
-        content_line "7) \033[32m更新当前内核\033[0m"
-        content_line "9) 手动指定处理器架构"
-        content_line ""
-        content_line "0 返回上级菜单"
-        separator_line "="
+        btm_box "5) 切换版本分支及压缩方式：\033[32m$zip_type\033[0m" \
+            "6) \033[36m使用自定义内核\033[0m $custcore" \
+            "7) \033[32m更新当前内核\033[0m" \
+            "9) 手动指定处理器架构" \
+            "" \
+            "0 返回上级菜单"
        read -r -p "请输入对应标号> " num
        case "$num" in
        "" | 0)
@@ -1188,7 +1185,7 @@ setserver() {
                comp_box "\033[33m开发版未经过妥善测试，可能依然存在大量bug！！！\033[0m" \
                    "\033[33m如果你没有足够的耐心或者测试经验，切勿使用此版本！\033[0m" \
                    "请务必加入我们的讨论组：\033[36;4mhttps://t.me/ShellClash\033[0m"
-                content_line "是否依然切换到开发版："
+                content_line "是否依然切换到开发版？"
                separator_line "-"
                btm_box "1) 确认切换" \
                    "0) 返回上级菜单"
@@ -1240,8 +1237,8 @@ setserver() {
                        while IFS= read -r line; do
                            content_line "$line"
                        done
-                    content_line ""
-                    content_line "0) 返回上级菜单"
+                    btm_box "" \
+                        "0) 返回上级菜单"
                    read -r -p "请输入对应标号> " num
                    if [ -z "$num" ] || [ "$num" = 0 ]; then
                        continue
--- a/scripts/menus/ddns.sh
+++ b/scripts/menus/ddns.sh
@@ -49,20 +49,15 @@ set_ddns() {
        read -r -p "请输入强制更新间隔(单位:小时；默认为24)> " force_interval
        [ -z "$force_interval" ] || [ "$force_interval" -lt 1 -o "$force_interval" -gt 240 ] && force_interval=24

-        line_break
-        separator_line "="
-        content_line "请核对如下信息："
-        content_line ""
-        content_line "服务商：		\033[32m$service\033[0m"
-        content_line "域名：			\033[32m$domain\033[0m"
-        content_line "用户名：		\033[32m$username\033[0m"
-        content_line "检测间隔：		\033[32m$check_interval\033[0m"
-        separator_line "="
-        content_line "是否确认添加："
-        separator_line "="
-        content_line "1) 是"
-        content_line "0) 否，重新輸入"
-        separator_line "="
+        comp_box "请核对如下信息：" \
+            "" \
+            "服务商：		\033[32m$service\033[0m" \
+            "域名：			\033[32m$domain\033[0m" \
+            "用户名：		\033[32m$username\033[0m" \
+            "检测间隔：		\033[32m$check_interval\033[0m"
+        btm_box "是否确认添加："
+        btm_box "1) 是" \
+            "0) 否，重新輸入"
        read -r -p "$COMMON_INPUT> " res
        if [ "$res" = 1 ]; then
            add_ddns
@@ -103,10 +98,10 @@ set_ddns_service() {
 set_ddns_type() {
    while true; do
        comp_box "\033[32m请选择网络模式：\033[0m"
-        content_line "1) \033[36mIPV4\033[0m"
-        content_line "2) \033[36mIPV6\033[0m"
-        content_line ""
-        common_back
+        btm_box "1) \033[36mIPV4\033[0m" \
+            "2) \033[36mIPV6\033[0m" \
+            "" \
+            "0) $COMMON_BACK"
        read -r -p "请输入对应数字> " num
        case "$num" in
        "" | 0)
@@ -135,16 +130,13 @@ rev_ddns_service() {
    while true; do
        enabled=$(uci get ddns."$service".enabled)
        [ "$enabled" = 1 ] && enabled_b="停用" || enabled_b="启用"
-        line_break
-        separator_line "="
-        content_line "1) \033[32m立即更新\033[0m"
-        content_line "2) 编辑当前服务"
-        content_line "3) $enabled_b当前服务"
-        content_line "4) 移除当前服务"
-        content_line "5) 查看运行日志"
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        comp_box "1) \033[32m立即更新\033[0m" \
+            "2) 编辑当前服务" \
+            "3) $enabled_b当前服务" \
+            "4) 移除当前服务" \
+            "5) 查看运行日志" \
+            "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应数字> " num
        case "$num" in
        "" | 0)
@@ -176,11 +168,9 @@ rev_ddns_service() {
            ;;
        5)
            line_break
-            separator_line "="
+            echo "==========================================================="
            cat /var/log/ddns/"$service".log 2>/dev/null
-            content_line ""
-            separator_line "="
-            sleep 1
+            echo "==========================================================="
            break
            ;;
        *)
--- a/scripts/menus/dns.sh
+++ b/scripts/menus/dns.sh
@@ -89,9 +89,9 @@ set_dns_mod() {
                line_break
                separator_line "="
                if [ "$hosts_opt" = ON ]; then
-                    content_line "当前\033[33m已启用\033[0mHosts优化，是否确认禁用："
+                    content_line "当前\033[33m已启用\033[0mHosts优化，是否确认禁用？"
                else
-                    content_line "当前\033[33m已禁用\033[0mHosts优化，是否确认启用："
+                    content_line "当前\033[33m已禁用\033[0mHosts优化，是否确认启用？"
                fi
                separator_line "="
                btm_box "1) 是" \
@@ -127,9 +127,9 @@ set_dns_mod() {
                line_break
                separator_line "="
                if [ "$ecs_subnet" = ON ]; then
-                    content_line "当前\033[33m已启用\033[0mHosts优化，是否确认禁用："
+                    content_line "当前\033[33m已启用\033[0mHosts优化，是否确认禁用？"
                else
-                    content_line "当前\033[33m已禁用\033[0mHosts优化，是否确认启用："
+                    content_line "当前\033[33m已禁用\033[0mHosts优化，是否确认启用？"
                fi
                separator_line "="
                btm_box "1) 是" \
@@ -164,7 +164,7 @@ set_dns_mod() {
                comp_box "\033[31m$DNS_REDIR_WARN\033[0m" \
                    "\033[33m$DNS_REDIR_HINT 127.0.0.1:$dns_port\033[0m" \
                    "" \
-                    "请直接输入旁路由IPV4地址" \
+                    "\033[36m请直接输入旁路由IPV4地址\033[0m" \
                    "或输入 r 重置DNS劫持端口" \
                    "或输入 0 返回上级菜单"
                read -r -p "请输入> " num
@@ -223,9 +223,8 @@ fake_ip_filter() {
        else
            content_line "\033[33m$DNS_FAKEIP_EMPTY\033[0m"
        fi
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "" \
+            "0) 返回上级菜单"
        read -r -p "$DNS_FAKEIP_EDIT> " input
        case "$input" in
        "" | 0)
--- a/scripts/menus/fw_filter.sh
+++ b/scripts/menus/fw_filter.sh
@@ -93,13 +93,13 @@ set_common_ports() {
            content_line "当前已放行端口：\033[36m$multiport\033[0m"
        fi
        separator_line "="
-        content_line "1) 启用/关闭端口过滤:	\033[36m$common_ports\033[0m"
-        content_line "2) 添加放行端口"
-        content_line "3) 移除指定放行端口"
-        content_line "4) 重置默认放行端口"
-        content_line "5) 重置为旧版放行端口"
-        content_line ""
-        common_back
+        btm_box "1) 启用/关闭端口过滤:	\033[36m$common_ports\033[0m" \
+            "2) 添加放行端口" \
+            "3) 移除指定放行端口" \
+            "4) 重置默认放行端口" \
+            "5) 重置为旧版放行端口" \
+            "" \
+            "0) $COMMON_BACK"
        read -r -p "$COMMON_INPUT> " num
        case "$num" in
        "" | 0)
@@ -125,7 +125,7 @@ set_common_ports() {
                    comp_box "\033[31m最多支持设置放行15个端口，请先减少一些！\033[0m"
                else
                    comp_box "当前已放行端口：\033[36m$multiport\033[0m"
-                    btm_box "请直接输入要放行的端口号\n（每次只能输入一个端口号，切勿一次添加多个端口号）" \
+                    btm_box "\033[36m请直接输入要放行的端口号\033[0m\n（每次只能输入一个端口号，切勿一次添加多个端口号）" \
                        "或输入 0 返回上级菜单"
                    read -r -p "请输入> " port
                    if [ "$port" = 0 ]; then
@@ -245,6 +245,7 @@ set_cust_host_ipv4() {
        esac
    done
 }
+
 set_reserve_ipv4() {
    while true; do
        [ -z "$reserve_ipv4" ] && reserve_ipv4="0.0.0.0/8 10.0.0.0/8 127.0.0.0/8 100.64.0.0/10 169.254.0.0/16 172.16.0.0/12 192.168.0.0/16 224.0.0.0/4 240.0.0.0/4"
@@ -283,6 +284,7 @@ set_reserve_ipv4() {
        esac
    done
 }
+
 # 局域网设备过滤
 fw_filter_lan() {
    get_devinfo() {
@@ -290,7 +292,6 @@ fw_filter_lan() {
        dev_mac=$(cat "$dhcpdir" | grep " $dev " | awk '{print $2}') && [ -z "$dev_mac" ] && dev_mac=$dev
        dev_name=$(cat "$dhcpdir" | grep " $dev " | awk '{print $4}') && [ -z "$dev_name" ] && dev_name='未知设备'
    }
-
    add_mac() {
        while true; do
            comp_box "手动输入mac地址时仅支持\033[32mxx:xx:xx:xx:xx:xx\033[0m的形式"
@@ -313,9 +314,8 @@ fw_filter_lan() {
            else
                content_line "无纪录"
            fi
-
-            content_line ""
-            common_back
+            btm_box "" \
+                "0) $COMMON_BACK"
            read -r -p "请输入对应序号或直接输入mac地址> " num
            if [ -z "$num" ] || [ "$num" = 0 ]; then
                i=
@@ -363,9 +363,8 @@ fw_filter_lan() {
            else
                content_line "无纪录"
            fi
-
-            content_line ""
-            common_back
+            btm_box "" \
+                "0) $COMMON_BACK"
            read -r -p "请输入对应序号或直接输入IP地址段> " num
            if [ -z "$num" ] || [ "$num" = 0 ]; then
                i=
@@ -404,8 +403,8 @@ fw_filter_lan() {
                        "$i" "$dev_ip" "$dev_mac" "$dev_name")"
                    i=$((i + 1))
                done
-                content_line ""
-                common_back
+                btm_box "" \
+                    "0) $COMMON_BACK"
                read -r -p "$COMMON_INPUT> " num
                mac_filter_rows=$(cat "$CRASHDIR"/configs/mac 2>/dev/null | wc -l)
                ip_filter_rows=$(cat "$CRASHDIR"/configs/ip_filter 2>/dev/null | wc -l)
--- a/scripts/menus/override.sh
+++ b/scripts/menus/override.sh
@@ -78,9 +78,8 @@ setrules() {
            while IFS= read -r line; do
                content_line "$line"
            done
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应数字> " num
        case "$num" in
        "" | 0) ;;
@@ -112,9 +111,8 @@ setrules() {
            while IFS= read -r line; do
                content_line "$line"
            done
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应数字> " num
        case "$num" in
        "" | 0) ;;
@@ -143,9 +141,8 @@ setrules() {
                while IFS= read -r line; do
                    content_line "$line"
                done
-            content_line ""
-            content_line "0) 返回上级菜单"
-            separator_line "="
+            btm_box "" \
+                "0) 返回上级菜单"
            read -r -p "请输入对应数字> " num
            case "$num" in
            "" | 0)
@@ -252,7 +249,7 @@ setgroups() {
        comp_box "\033[33m注意策略组名称必须和【自定义规则】或【自定义节点】功能中指定的策略组一致！\033[0m" \
            "\033[33m建议先创建策略组，之后可在【自定义规则】或【自定义节点】功能中智能指定\033[0m" \
            "\033[33m如需在当前策略组下添加节点，请手动编辑$YAMLSDIR/proxy-groups.yaml\033[0m"
-        btm_box "\033[32m请直接输入自定义策略组名称\033[0m\n（不支持纯数字且不要包含特殊字符！）" \
+        btm_box "\033[36m请直接输入自定义策略组名称\033[0m\n（不支持纯数字且不要包含特殊字符！）" \
            "或输入 0 返回上级菜单"
        read -r -p "请输入> " new_group_name

@@ -322,12 +319,11 @@ EOF
    while true; do
        comp_box "\033[33m你可以在这里快捷管理自定义策略组\033[0m" \
            "\033[36m如需修改或批量操作，请手动编辑：$YAMLSDIR/proxy-groups.yaml\033[0m"
-        content_line "1) 添加自定义策略组"
-        content_line "2) 查看自定义策略组"
-        content_line "3) 清空自定义策略组"
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "1) 添加自定义策略组" \
+            "2) 查看自定义策略组" \
+            "3) 清空自定义策略组" \
+            "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应数字> " num
        case "$num" in
        "" | 0)
@@ -398,9 +394,8 @@ setproxies() {
            while IFS= read -r line; do
                content_line "$line"
            done
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应数字（多个用空格分隔）> " char
        case "$char" in
        "" | 0) ;;
@@ -423,13 +418,12 @@ setproxies() {
    while true; do
        comp_box "\033[33m你可以在这里快捷管理自定义节点\033[0m" \
            "\033[36m如需批量操作，请手动编辑：$YAMLSDIR/proxies.yaml\033[0m"
-        content_line "1) 添加自定义节点"
-        content_line "2) 管理自定义节点"
-        content_line "3) 清空自定义节点"
-        content_line "4) 配置节点绕过：	\033[36m$proxies_bypass\033[0m"
-        content_line ""
-        content_line "0) 返回上级菜单"
-        separator_line "="
+        btm_box "1) 添加自定义节点" \
+            "2) 管理自定义节点" \
+            "3) 清空自定义节点" \
+            "4) 配置节点绕过：	\033[36m$proxies_bypass\033[0m" \
+            "" \
+            "0) 返回上级菜单"
        read -r -p "请输入对应数字> " num
        case "$num" in
        "" | 0)
@@ -451,9 +445,8 @@ setproxies() {
                    while IFS= read -r line; do
                        content_line "$line"
                    done
-                content_line ""
-                content_line "0) 返回上级菜单"
-                separator_line "="
+                btm_box "" \
+                    "0) 返回上级菜单"
                read -r -p "请输入对应数字> " num
                if [ "$num" = 0 ]; then
                    continue
--- a/scripts/menus/providers.sh
+++ b/scripts/menus/providers.sh
@@ -21,11 +21,11 @@ providers() {
            [ -z "$provider_temp_des" ] && provider_temp_des=$provider_temp_file
        fi

-        top_box "1) \033[32m生成\033[0m包含全部提供者的配置文件" \
+        comp_box "1) \033[32m生成\033[0m包含全部提供者的配置文件" \
            "2) 选择\033[33m规则模版\033[0m     \033[32m$provider_temp_des\033[0m" \
            "3) \033[33m清理\033[0mproviders目录文件" \
-            ""
-        common_back
+            "" \
+            "0) $COMMON_BACK"
        read -r -p "请输入对应字母或数字> " num
        case "$num" in
        "" | 0)
@@ -45,15 +45,15 @@ providers() {
            comp_box "当前规则模版为：\033[32m$provider_temp_des\033[0m" \
                "\033[33m请选择在线模版：\033[0m"
            list_box "$list"
-            content_line ""
-            content_line "a) 使用\033[36m本地模版\033[0m"
-            content_line ""
-            common_back
+            btm_box "" \
+                "a) 使用\033[36m本地模版\033[0m" \
+                "" \
+                "0) $COMMON_BACK"
            read -r -p "请输入对应字母或数字> " num
            case "$num" in
            "" | 0) ;;
            a)
-                echo ""
+                line_break
                read -r -p "请输入模版的路径（绝对路径）> " dir
                if [ -s "$dir" ]; then
                    provider_temp_file=$dir
--- a/scripts/menus/uninstall.sh
+++ b/scripts/menus/uninstall.sh
@@ -6,9 +6,8 @@ uninstall() {
    comp_box "\033[31m警告：\033[0m" \
        "\033[31m该操作不可逆！\033" \
        "是否确认卸载ShellCrash："
-    content_line "1) 是"
-    content_line "0) 否"
-    separator_line "="
+    btm_box "1) 是" \
+        "0) 否"
    read -r -p "$COMMON_INPUT> " res
    if [ "$res" = '1' ]; then
        # 停止服务
@@ -21,9 +20,8 @@ uninstall() {
        # 移除安装目录
        if [ -n "$CRASHDIR" ] && [ "$CRASHDIR" != '/' ]; then
            comp_box "是否保留脚本配置及订阅文件："
-            content_line "1) 是"
-            content_line "0) 否"
-            separator_line "="
+            btm_box "1) 是" \
+                "0) 否"
            read -r -p "$COMMON_INPUT> " res
            if [ "$res" = '1' ]; then
                mv -f "$CRASHDIR"/configs /tmp/ShellCrash/configs_bak