+
+
@@ -12,147 +9,177 @@
-中文 | [English](README.md)
+
+ 一款在 Shell 环境下便捷部署与管理 mihomo/sing-box 内核的脚本工具
+
-功能简介：
---
+
+ 简体中文 | English
+
-~通过管理脚本在Shell环境下便捷使用Mihomo/Singbox内核
-~支持在Shell环境下管理
-~支持在线导入订阅及配置链接
-~支持配置定时任务，支持配置文件定时更新
-~支持在线安装及使用本地网页面板管理内置规则
-~支持路由模式、本机模式等多种模式切换
-~支持在线更新
+---
-设备支持：
---
+## :rocket: 核心特性
-~支持各种基于OpenWrt或使用OpenWrt二次定制开发的路由器设备
-~支持各种运行标准Linux系统（如Debian/CenOS/Armbian等）的设备
-~兼容Padavan固件（保守模式）、潘多拉固件以及华硕/梅林固件
-~兼容各类使用Linux内核定制开发的各类型设备
+- **多内核支持**：在 Shell 环境下便捷管理及切换 **mihomo** 与 **sing-box** 内核。
+- **灵活配置管理**：支持在线导入订阅连结及配置文件，简化配置流程。
+- **自动化任务**：支持配置定时任务，实现配置文件与规则的自动定时更新。
+- **图形化面板**：支持在线安装并使用本地 Web 面板（Dashboard），直观管理内置规则与流量。
+- **多模式运行**：支持路由模式、本机模式等多种流量转发模式切换。
+- **一键维护**：内置脚本在线更新功能，保持版本与功能的及时更迭。
-——————————
-~更多设备支持，请提issue或前往TG群反馈（需提供设备名称及运行uname -a返回的设备核心信息）
+## :computer: 设备支持
-## 常见问题：
+ShellCrash 旨在兼容绝大多数基于 Linux 内核的网络设备：
-[ShellCrash常见问题 | Juewuy's Blog](https://juewuy.github.io/chang-jian-wen-ti/)
+* **路由器设备**：支持各种基于 OpenWrt 或其二次开发的固件。
+* **Linux 服务器**：支持运行标准 Linux 发行版（如 Debian、CentOS、Armbian、Ubuntu 等）的设备。
+* **第三方固件**：兼容 Padavan（保守模式）、潘多拉固件以及华硕/梅林固件。
+* **各类定制设备**：兼容其他使用 Linux 内核开发的专用网络设备。
-## 使用方式：
+> 更多设备支持，请提交 [Issue](https://github.com/juewuy/ShellCrash/issues) 或前往 [Telegram 群组](https://t.me/ShellClash) 反馈（请附上设备型号及 `uname -a` 命令的输出信息）。
-~确认设备已经开启SSH并获取root权限（带GUI桌面的Linux设备可使用自带终端安装）
-~使用SSH连接工具（如putty，JuiceSSH，系统自带终端等）路由器或Linux设备的SSH管理界面或终端界面
+---
-~之后在SSH界面执行目标设备对应的安装命令，并按照后续提示完成安装
+## :hammer_and_wrench: 安装指南
-### 在线安装：
+> [!TIP]
+> 若遇到连接失败或SSL相关问题，请尝试切换至其他安装镜像站。
-（**如无法连接或出现SSL连接错误，请尝试更换各种不同的安装源！**）
+### 前置条件
+1. 确保设备已开启 **SSH** 并获得 **Root 权限**（带图形介面的 Linux 系统可直接使用终端）。
+2. 使用 SSH 工具（如 Putty、JuiceSSH、或系统自带终端）连接至设备。
-~**标准Linux设备安装：**
+### :penguin: 标准 Linux 设备安装
-```shell
-sudo -i #切换到root用户，如果需要密码，请输入密码
-export url='https://testingcf.jsdelivr.net/gh/juewuy/ShellCrash@master' && wget -q --no-check-certificate -O /tmp/install.sh $url/install.sh && bash /tmp/install.sh && . /etc/profile &> /dev/null
-```
-或者
-```shell
-sudo -i #切换到root用户，如果需要密码，请输入密码
-export url='https://gh.jwsc.eu.org/master' && bash -c "$(curl -kfsSl $url/install.sh)" && . /etc/profile &> /dev/null
+> [!IMPORTANT]
+> 请以 root 用户进行安装。
+
+> 使用 wget 安装（jsDelivr CDN 源）
+```sh
+export url='https://testingcf.jsdelivr.net/gh/juewuy/ShellCrash@master' \
+ && wget -q --no-check-certificate -O /tmp/install.sh $url/install.sh \
+ && bash /tmp/install.sh \
+ && . /etc/profile &> /dev/null
```
-~**路由设备使用curl安装**：
+> 或使用 curl 安装（作者私人源）
-```shell
-#GitHub源(可能需要代理)
-export url='https://raw.githubusercontent.com/juewuy/ShellCrash/master' && sh -c "$(curl -kfsSl $url/install.sh)" && . /etc/profile &> /dev/null
-```
-或者
-```shell
-#jsDelivrCDN源
-export url='https://testingcf.jsdelivr.net/gh/juewuy/ShellCrash@master' && sh -c "$(curl -kfsSl $url/install.sh)" && . /etc/profile &> /dev/null
-```
-或者
-```shell
-#作者私人源
-export url='https://gh.jwsc.eu.org/master' && sh -c "$(curl -kfsSl $url/install.sh)" && . /etc/profile &> /dev/null
+```sh
+export url='https://gh.jwsc.eu.org/master' \
+ && bash -c "$(curl -kfsSl $url/install.sh)" \
+ && . /etc/profile &> /dev/null
```
-~**路由设备使用wget安装**：
+### :satellite: 路由器设备安装
-```Shell
-#GitHub源(可能需要代理)
-export url='https://raw.githubusercontent.com/juewuy/ShellCrash/master' && wget -q --no-check-certificate -O /tmp/install.sh $url/install.sh && sh /tmp/install.sh && . /etc/profile &> /dev/null
-```
-或者
-```shell
-#jsDelivrCDN源
-export url='https://testingcf.jsdelivr.net/gh/juewuy/ShellCrash@master' && wget -q --no-check-certificate -O /tmp/install.sh $url/install.sh && sh /tmp/install.sh && . /etc/profile &> /dev/null
+**使用 `curl` 安装：**
+> GitHub 源（推荐海外环境或具备代理环境使用）
+```sh
+export url='https://raw.githubusercontent.com/juewuy/ShellCrash/master' \
+ && sh -c "$(curl -kfsSl $url/install.sh)" \
+ && . /etc/profile &> /dev/null
```
-~**老旧设备使用低版本wge安装**：
+> 或 jsDelivr CDN 源
-```Shell
-#作者私人http内测源
-export url='http://t.jwsc.eu.org' && wget -q -O /tmp/install.sh $url/install.sh && sh /tmp/install.sh && . /etc/profile &> /dev/null
+```sh
+export url='https://testingcf.jsdelivr.net/gh/juewuy/ShellCrash@master' \
+ && sh -c "$(curl -kfsSl $url/install.sh)" \
+ && . /etc/profile &> /dev/null
```
-##### ~**虚拟机安装：**
+> 或作者私人源
+```sh
+export url='https://gh.jwsc.eu.org/master' \
+ && sh -c "$(curl -kfsSl $url/install.sh)" \
+ && . /etc/profile &> /dev/null
+```
-虚拟机环境强烈建议使用Alpine镜像安装
+**使用 `wget` 安装：**
+> GitHub 源（推荐海外环境或具备代理环境使用）
+```sh
+export url='https://raw.githubusercontent.com/juewuy/ShellCrash/master' \
+ && wget -q --no-check-certificate -O /tmp/install.sh $url/install.sh \
+ && sh /tmp/install.sh \
+ && . /etc/profile &> /dev/null
+```
-```shell
-#安装必要依赖
+> 或 jsDelivr CDN 源
+```sh
+export url='https://testingcf.jsdelivr.net/gh/juewuy/ShellCrash@master' \
+ && wget -q --no-check-certificate -O /tmp/install.sh $url/install.sh \
+ && sh /tmp/install.sh \
+ && . /etc/profile &> /dev/null
+```
+
+### :pager: 老旧设备使用低版本 `wget` 安装
+
+> 作者私人 http 内测源
+```sh
+export url='http://t.jwsc.eu.org' \
+ && wget -q -O /tmp/install.sh $url/install.sh \
+ && sh /tmp/install.sh \
+ && . /etc/profile &> /dev/null
+```
+
+
+### :cloud: 虚拟机
+- **Alpine Linux 虚拟机**：强烈建议使用 Alpine 镜像以获得最佳兼容性
+```sh
+# 安装必要依赖
apk add --no-cache wget openrc ca-certificates tzdata nftables iproute2 dcron
-#执行安装命令
-export url='https://testingcf.jsdelivr.net/gh/juewuy/ShellCrash@master' && wget -q --no-check-certificate -O /tmp/install.sh $url/install.sh && sh /tmp/install.sh && . /etc/profile &> /dev/null
+
+# 执行安装命令
+export url='https://testingcf.jsdelivr.net/gh/juewuy/ShellCrash@master' \
+ && wget -q --no-check-certificate -O /tmp/install.sh $url/install.sh \
+ && sh /tmp/install.sh \
+ && . /etc/profile &> /dev/null
```
-##### ~Docker安装：
+ ### :whale: Docker
-请前往[ShellCrash官方Docker镜像](https://hub.docker.com/r/juewuy/shellcrash)
+ 请访问官方 Docker 镜像：
-### **本地安装：**
+- [ShellCrash on Docker Hub](https://hub.docker.com/r/juewuy/shellcrash)
-如使用在线安装出现问题，请参考：[本地安装ShellCrash的教程 | Juewuy's Blog](https://juewuy.github.io/bdaz) 使用本地安装！
-### 使用脚本：
+### :package: 本地安装
-安装完成管理脚本后，执行如下命令使用~
+若无法进行在线安装，请参照以下指南执行本地安装：
-```Shell
-crash #进入对话
-crash -h #帮助列表
-```
+- [本地安装ShellCrash教程 | Juewuy's Blog](https://juewuy.github.io/bdaz)
-#### **运行时的额外依赖**：
+---
-> 大部分的设备/系统都已经预装了以下的大部分依赖，使用时如无影响可以无视之
+## :book: 使用说明
+
+安装完成后，在终端输入以下指令即可启动管理界面：
```shell
-curl/wget 必须 全部缺少时无法在线安装及更新，无法使用节点保存功能
-iptables/nftables 重要 缺少时只能使用纯净模式
-crontab 较低 缺少时无法启用定时任务功能
-net-tools 极低 缺少时无法正常检测端口占用
-ubus/iproute-doc 极低 缺少时无法正常获取本机host地址
+crash # 启动脚本交互选单
+crash -h # 查看命令帮助列表
```
+### 运行依赖说明
+| 依赖组件 | 必要性 | 说明 |
+| :--- | :--- | :--- |
+| curl / wget | 必须 | 缺少时将无法进行节点保存、在线安装及更新操作 |
+| iptables / nftables | 重要 | 缺少时仅能运行于纯淨模式 |
+| crontab | 较低 | 缺少时定时任务功能将失效 |
+| net-tools | 极低 | 缺少时无法自动检测端口占用 |
+| ubus / iproute-doc | 极低 | 缺少时无法自动获取本机 Host 地址 |
+---
-更新日志：
---
+## :link: 相关链接
+- 常见问题：[Juewuy's Blog](https://juewuy.github.io/chang-jian-wen-ti/)
+- 更新日志：[Release History](https://github.com/juewuy/ShellCrash/releases)
+- 交流反馈：[Telegram 讨论组](https://t.me/ShellClash)
-### [点击查看](https://github.com/juewuy/ShellCrash/releases)
+---
-交流反馈：
---
-### [TG讨论组](https://t.me/ShellClash)
+## :airplane: 机场推荐
-机场推荐：
---
-
-#### [Dler-墙洞，多年稳定运行，功能齐全](https://dler.pro/auth/register?affid=89698)
-
-#### [大米-群友力荐，流媒体解锁，月付推荐](https://1s.bigmeok.me/user#/register?code=2PuWY9I7)
+- [**Dler-墙洞**](https://dler.pro/auth/register?affid=89698)，多年稳定运行，功能齐全。
+- [**大米**](https://1s.bigmeok.me/user#/register?code=2PuWY9I7)，群友力荐，流媒体解锁，月付推荐。
diff --git a/ShellCrash.tar.gz b/ShellCrash.tar.gz
index 255c2516..6e24154c 100644
Binary files a/ShellCrash.tar.gz and b/ShellCrash.tar.gz differ
diff --git a/bin/clashfm.tar.gz b/bin/clashfm.tar.gz
index 255c2516..6e24154c 100644
Binary files a/bin/clashfm.tar.gz and b/bin/clashfm.tar.gz differ
diff --git a/bin/version b/bin/version
index 9cc791f5..417d29e0 100644
--- a/bin/version
+++ b/bin/version
@@ -1,4 +1,4 @@
meta_v=v1.19.17
singboxr_v=1.13.0-alpha.27
-versionsh=1.9.4beta1
+versionsh=1.9.4beta1.1
GeoIP_v=20251205
diff --git a/install.sh b/install.sh
index d8dc188c..ebcaff6c 100644
--- a/install.sh
+++ b/install.sh
@@ -12,17 +12,19 @@ echo "***********************************************"
# Check available capacity
dir_avail() {
- df -h >/dev/null 2>&1 && h="$2"
+ df -h >/dev/null 2>&1 && h="$2"
df -P $h "${1:-.}" 2>/dev/null | awk 'NR==2 {print $4}'
}
-ckcmd() { #检查命令
- if command -v sh >/dev/null 2>&1;then
+# 检查命令
+ckcmd() {
+ if command -v sh >/dev/null 2>&1; then
command -v "$1" >/dev/null 2>&1
else
type "$1" >/dev/null 2>&1
fi
}
+
webget() {
#参数【$1】代表下载目录，【$2】代表在线地址
#参数【$3】代表输出显示，【$4】不启用重定向
@@ -44,35 +46,50 @@ webget() {
[ $? -eq 0 ] && result="200"
fi
}
+
error_down() {
$echo "请参考 \033[32mhttps://github.com/juewuy/ShellCrash/blob/master/README_CN.md"
$echo "\033[33m使用其他安装源重新安装！\033[0m"
}
-#安装及初始化
+# 安装及初始化
set_alias() {
- echo "-----------------------------------------------"
- $echo "\033[36m请选择一个别名，或使用自定义别名：\033[0m"
- echo "-----------------------------------------------"
- $echo " 1 【\033[32mcrash\033[0m】"
- $echo " 2 【\033[32m sc \033[0m】"
- $echo " 3 【\033[32m mm \033[0m】"
- $echo " 0 退出安装"
- echo "-----------------------------------------------"
- read -p "请输入相应数字或自定义别名 > " res
- case "$res" in
- 1) my_alias=crash ;;
- 2) my_alias=sc ;;
- 3) my_alias=mm ;;
- 0) echo "安装已取消"; exit 1 ;;
- *) my_alias=$res ;;
- esac
- cmd=$(ckcmd "$my_alias" | grep 'menu.sh')
- ckcmd "$my_alias" && [ -z "$cmd" ] && {
- $echo "\033[33m此别名和当前系统内置命令/别名冲突，请换一个！\033[0m"
- sleep 1
- set_alias
- }
+ while true; do
+ echo "-----------------------------------------------"
+ $echo "\033[36m请选择一个别名，或使用自定义别名：\033[0m"
+ echo "-----------------------------------------------"
+ $echo " 1 【\033[32mcrash\033[0m】"
+ $echo " 2 【\033[32m sc \033[0m】"
+ $echo " 3 【\033[32m mm \033[0m】"
+ $echo " 0 退出安装"
+ echo "-----------------------------------------------"
+ read -p "请输入相应数字或自定义别名 > " res
+ case "$res" in
+ 0)
+ echo "安装已取消"
+ exit 1
+ ;;
+ 1)
+ my_alias=crash
+ ;;
+ 2)
+ my_alias=sc
+ ;;
+ 3)
+ my_alias=mm
+ ;;
+ *)
+ my_alias=$res
+ ;;
+ esac
+ cmd=$(ckcmd "$my_alias" | grep 'menu.sh')
+ ckcmd "$my_alias" && [ -z "$cmd" ] && {
+ $echo "\033[33m此别名和当前系统内置命令/别名冲突，请换一个！\033[0m"
+ sleep 1
+ continue
+ }
+ break
+ done
}
gettar() {
@@ -83,9 +100,9 @@ gettar() {
exit 1
else
$CRASHDIR/start.sh stop 2>/dev/null
- #解压
+ # 解压
echo "-----------------------------------------------"
- echo 开始解压文件！
+ echo "开始解压文件！"
mkdir -p $CRASHDIR >/dev/null
tar -zxf '/tmp/ShellCrash.tar.gz' -C $CRASHDIR/ || tar -zxf '/tmp/ShellCrash.tar.gz' --no-same-owner -C $CRASHDIR/
if [ -s $CRASHDIR/init.sh ]; then
@@ -100,154 +117,175 @@ gettar() {
fi
fi
}
-setdir() {
- set_usb_dir() {
+
+set_usb_dir() {
+ while true; do
$echo "请选择安装目录"
du -hL /mnt | awk '{print " "NR" "$2" "$1}'
read -p "请输入相应数字 > " num
dir=$(du -hL /mnt | awk '{print $2}' | sed -n "$num"p)
if [ -z "$dir" ]; then
$echo "\033[31m输入错误！请重新设置！\033[0m"
- set_usb_dir
+ continue
fi
- }
- set_asus_dir() {
+ break 1
+ done
+}
+
+set_asus_dir() {
+ while true; do
echo -e "请选择U盘目录"
du -hL /tmp/mnt | awk -F/ 'NF<=4' | awk '{print " "NR" "$2" "$1}'
read -p "请输入相应数字 > " num
dir=$(du -hL /tmp/mnt | awk -F/ 'NF<=4' | awk '{print $2}' | sed -n "$num"p)
if [ ! -f "$dir/asusware.arm/etc/init.d/S50downloadmaster" ]; then
echo -e "\033[31m未找到下载大师自启文件：$dir/asusware.arm/etc/init.d/S50downloadmaster，请检查设置！\033[0m"
- set_asus_dir
+ continue
fi
- }
- set_cust_dir() {
+ break 1
+ done
+}
+
+set_cust_dir() {
+ while true; do
echo "-----------------------------------------------"
- echo '可用路径 剩余空间:'
+ echo '可用路径 剩余空间：'
df -h | awk '{print $6,$4}' | sed 1d
echo '路径是必须带 / 的格式，注意写入虚拟内存(/tmp,/opt,/sys...)的文件会在重启后消失！！！'
read -p "请输入自定义路径 > " dir
if [ "$(dir_avail $dir)" = 0 ] || [ -n "$(echo $dir | grep -E 'tmp|opt|sys')" ]; then
$echo "\033[31m路径错误！请重新设置！\033[0m"
- set_cust_dir
+ continue
fi
- }
- echo "-----------------------------------------------"
- $echo "\033[33m注意：安装ShellCrash至少需要预留约1MB的磁盘空间\033[0m"
- if [ -n "$systype" ]; then
- [ "$systype" = "Padavan" ] && dir=/etc/storage
- [ "$systype" = "mi_snapshot" ] && {
- $echo "\033[33m检测到当前设备为小米官方系统，请选择安装位置\033[0m"
- [ -d /data ] && $echo " 1 安装到 /data 目录,剩余空间：$(dir_avail /data -h)(支持软固化功能)"
- [ -d /userdisk ] && $echo " 2 安装到 /userdisk 目录,剩余空间：$(dir_avail /userdisk -h)(支持软固化功能)"
- [ -d /data/other_vol ] && $echo " 3 安装到 /data/other_vol 目录,剩余空间：$(dir_avail /data/other_vol -h)(支持软固化功能)"
- $echo " 4 安装到自定义目录(不推荐，不明勿用！)"
+ break 1
+ done
+}
+
+setdir() {
+ while true; do
+ echo "-----------------------------------------------"
+ $echo "\033[33m注意：安装ShellCrash至少需要预留约1MB的磁盘空间\033[0m"
+ if [ -n "$systype" ]; then
+ [ "$systype" = "Padavan" ] && dir=/etc/storage
+ [ "$systype" = "mi_snapshot" ] && {
+ $echo "\033[33m检测到当前设备为小米官方系统，请选择安装位置\033[0m"
+ [ -d /data ] && $echo " 1 安装到 /data 目录,剩余空间：$(dir_avail /data -h)(支持软固化功能)"
+ [ -d /userdisk ] && $echo " 2 安装到 /userdisk 目录,剩余空间：$(dir_avail /userdisk -h)(支持软固化功能)"
+ [ -d /data/other_vol ] && $echo " 3 安装到 /data/other_vol 目录,剩余空间：$(dir_avail /data/other_vol -h)(支持软固化功能)"
+ $echo " 4 安装到自定义目录(不推荐，不明勿用！)"
+ $echo " 0 退出安装"
+ echo "-----------------------------------------------"
+ read -p "请输入相应数字 > " num
+ case "$num" in
+ 1)
+ dir=/data
+ ;;
+ 2)
+ dir=/userdisk
+ ;;
+ 3)
+ dir=/data/other_vol
+ ;;
+ 4)
+ set_cust_dir
+ ;;
+ *)
+ exit 1
+ ;;
+ esac
+ }
+ [ "$systype" = "asusrouter" ] && {
+ $echo "\033[33m检测到当前设备为华硕固件，请选择安装方式\033[0m"
+ $echo " 1 基于USB设备安装(限23年9月之前固件，须插入\033[31m任意\033[0mUSB设备)"
+ $echo " 2 基于自启脚本安装(仅支持梅林及部分非koolshare官改固件)"
+ $echo " 3 基于U盘+下载大师安装(支持所有固件，限ARM设备，须插入U盘或移动硬盘)"
+ $echo " 0 退出安装"
+ echo "-----------------------------------------------"
+ read -p "请输入相应数字 > " num
+ case "$num" in
+ 1)
+ read -p "将脚本安装到USB存储/系统闪存？(1/0) > " res
+ [ "$res" = "1" ] && set_usb_dir || dir=/jffs
+ usb_status=1
+ ;;
+ 2)
+ $echo "如无法正常开机启动，请重新使用USB方式安装！"
+ sleep 2
+ dir=/jffs
+ ;;
+ 3)
+ echo -e "请先在路由器网页后台安装下载大师并启用，之后选择外置存储所在目录！"
+ sleep 2
+ set_asus_dir
+ ;;
+ *)
+ exit 1
+ ;;
+ esac
+ }
+ [ "$systype" = "ng_snapshot" ] && dir=/tmp/mnt
+ else
+ $echo " 1 在\033[32m/etc目录\033[0m下安装(适合root用户)"
+ $echo " 2 在\033[32m/usr/share目录\033[0m下安装(适合Linux系统)"
+ $echo " 3 在\033[32m当前用户目录\033[0m下安装(适合非root用户)"
+ $echo " 4 在\033[32m外置存储\033[0m中安装"
+ $echo " 5 手动设置安装目录"
$echo " 0 退出安装"
- echo "-----------------------------------------------"
+ echo "----------------------------------------------"
read -p "请输入相应数字 > " num
+ # 设置目录
case "$num" in
1)
- dir=/data
+ dir=/etc
;;
2)
- dir=/userdisk
+ dir=/usr/share
;;
3)
- dir=/data/other_vol
+ dir=~/.local/share
+ mkdir -p ~/.config/systemd/user
;;
4)
+ set_usb_dir
+ ;;
+ 5)
set_cust_dir
;;
*)
+ echo "安装已取消"
exit 1
;;
esac
- }
- [ "$systype" = "asusrouter" ] && {
- $echo "\033[33m检测到当前设备为华硕固件，请选择安装方式\033[0m"
- $echo " 1 基于USB设备安装(限23年9月之前固件，须插入\033[31m任意\033[0mUSB设备)"
- $echo " 2 基于自启脚本安装(仅支持梅林及部分非koolshare官改固件)"
- $echo " 3 基于U盘+下载大师安装(支持所有固件，限ARM设备，须插入U盘或移动硬盘)"
- $echo " 0 退出安装"
- echo "-----------------------------------------------"
- read -p "请输入相应数字 > " num
- case "$num" in
- 1)
- read -p "将脚本安装到USB存储/系统闪存？(1/0) > " res
- [ "$res" = "1" ] && set_usb_dir || dir=/jffs
- usb_status=1
- ;;
- 2)
- $echo "如无法正常开机启动，请重新使用USB方式安装！"
- sleep 2
- dir=/jffs
- ;;
- 3)
- echo -e "请先在路由器网页后台安装下载大师并启用，之后选择外置存储所在目录！"
- sleep 2
- set_asus_dir
- ;;
- *)
- exit 1
- ;;
- esac
- }
- [ "$systype" = "ng_snapshot" ] && dir=/tmp/mnt
- else
- $echo " 1 在\033[32m/etc目录\033[0m下安装(适合root用户)"
- $echo " 2 在\033[32m/usr/share目录\033[0m下安装(适合Linux系统)"
- $echo " 3 在\033[32m当前用户目录\033[0m下安装(适合非root用户)"
- $echo " 4 在\033[32m外置存储\033[0m中安装"
- $echo " 5 手动设置安装目录"
- $echo " 0 退出安装"
- echo "----------------------------------------------"
- read -p "请输入相应数字 > " num
- #设置目录
- case "$num" in
- 1)
- dir=/etc
- ;;
- 2)
- dir=/usr/share
- ;;
- 3)
- dir=~/.local/share
- mkdir -p ~/.config/systemd/user
- ;;
- 4)
- set_usb_dir
- ;;
- 5)
- set_cust_dir
- ;;
- *)
- echo "安装已取消"
- exit 1
- ;;
- esac
- fi
+ fi
- if [ ! -w $dir ]; then
- $echo "\033[31m没有$dir目录写入权限！请重新设置！\033[0m" && sleep 1 && setdir
- else
- $echo "目标目录\033[32m$dir\033[0m空间剩余：$(dir_avail $dir -h)"
- read -p "确认安装？(1/0) > " res
- [ "$res" = "1" ] && CRASHDIR=$dir/ShellCrash || setdir
- fi
+ if [ ! -w $dir ]; then
+ $echo "\033[31m没有$dir目录写入权限！请重新设置！\033[0m"
+ sleep 1
+ else
+ $echo "目标目录\033[32m$dir\033[0m空间剩余：$(dir_avail $dir -h)"
+ read -p "确认安装？(1/0) > " res
+ if [ "$res" = "1" ]; then
+ CRASHDIR=$dir/ShellCrash
+ break
+ fi
+ fi
+ done
}
+
install() {
echo "-----------------------------------------------"
- echo 开始从服务器获取安装文件！
+ echo "开始从服务器获取安装文件！"
echo "-----------------------------------------------"
gettar
echo "-----------------------------------------------"
echo "ShellCrash 已经安装成功!"
- [ "$profile" = "~/.bashrc" ] && echo "请执行【. ~/.bashrc > /dev/null】命令以加载环境变量！"
- [ -n "$(ls -l /bin/sh | grep -oE 'zsh')" ] && echo "请执行【. ~/.zshrc > /dev/null】命令以加载环境变量！"
+ [ "$profile" = "~/.bashrc" ] && echo "请执行【. ~/.bashrc > /dev/null】命令以更新环境变量！"
+ [ -n "$(ls -l /bin/sh | grep -oE 'zsh')" ] && echo "请执行【. ~/.zshrc > /dev/null】命令以更新环境变量！"
echo "-----------------------------------------------"
$echo "\033[33m输入\033[30;47m $my_alias \033[0;33m命令即可管理！！！\033[0m"
echo "-----------------------------------------------"
}
+
setversion() {
echo "-----------------------------------------------"
$echo "\033[33m请选择想要安装的版本：\033[0m"
@@ -266,7 +304,8 @@ setversion() {
*) ;;
esac
}
-#特殊固件识别及标记
+
+# 特殊固件识别及标记
[ -f "/etc/storage/started_script.sh" ] && {
systype=Padavan #老毛子固件
initdir='/etc/storage/started_script.sh'
@@ -279,9 +318,9 @@ setversion() {
[ -f "/data/etc/crontabs/root" ] && systype=mi_snapshot #小米设备
[ -w "/var/mnt/cfg/firewall" ] && systype=ng_snapshot #NETGEAR设备
-#检查root权限
+# 检查root权限
if [ "$USER" != "root" -a -z "$systype" ]; then
- echo 当前用户:$USER
+ echo "当前用户:$USER"
$echo "\033[31m请尽量使用root用户（不要直接使用sudo命令！）执行安装!\033[0m"
echo "-----------------------------------------------"
read -p "仍要安装？可能会产生未知错误！(1/0) > " res
@@ -291,12 +330,13 @@ fi
if [ -n "$(echo $url | grep master)" ]; then
setversion
fi
-#获取版本信息
+
+# 获取版本信息
webget /tmp/version "$url/version" echooff
[ "$result" = "200" ] && versionsh=$(cat /tmp/version)
rm -rf /tmp/version
-#输出
+# 输出
$echo "最新版本：\033[32m$versionsh\033[0m"
echo "-----------------------------------------------"
$echo "\033[44m如遇问题请加TG群反馈：\033[42;30m t.me/ShellClash \033[0m"
diff --git a/rules/clash_providers/DustinWin_RS_Full.yaml b/rules/clash_providers/DustinWin_RS_Full.yaml
index 716e1c46..2d7fe738 100644
--- a/rules/clash_providers/DustinWin_RS_Full.yaml
+++ b/rules/clash_providers/DustinWin_RS_Full.yaml
@@ -8,6 +8,8 @@ proxy-groups:
- {name: 🪟 微软服务, type: select, proxies: [🎯 全球直连, 🚀 节点选择]}
- {name: 🇬 谷歌服务, type: select, proxies: [🎯 全球直连, 🚀 节点选择]}
- {name: 🍎 苹果服务, type: select, proxies: [🎯 全球直连, 🚀 节点选择]}
+ - {name: 🎥 奈飞视频, type: select, proxies: [🚀 节点选择, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇯🇵 日本节点, 🇸🇬 新加坡节点, 🇺🇸 美国节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
+ - {name: 📹 油管视频, type: select, proxies: [🚀 节点选择, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇯🇵 日本节点, 🇸🇬 新加坡节点, 🇺🇸 美国节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- {name: 🌍 国外媒体, type: select, proxies: [🚀 节点选择, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇯🇵 日本节点, 🇸🇬 新加坡节点, 🇺🇸 美国节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- {name: 🎮 游戏平台, type: select, proxies: [🚀 节点选择, 🎯 全球直连, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇯🇵 日本节点, 🇸🇬 新加坡节点, 🇺🇸 美国节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- {name: 🛡️ 直连域名, type: select, proxies: [🎯 全球直连, 🚀 节点选择]}
diff --git a/rules/clash_providers/DustinWin_RS_Full_NoAds.yaml b/rules/clash_providers/DustinWin_RS_Full_NoAds.yaml
index 65b1112a..c3620ca9 100644
--- a/rules/clash_providers/DustinWin_RS_Full_NoAds.yaml
+++ b/rules/clash_providers/DustinWin_RS_Full_NoAds.yaml
@@ -7,6 +7,8 @@ proxy-groups:
- {name: 🎮 游戏服务, type: select, proxies: [🎯 全球直连, 👑 高级节点, 🚀 节点选择]}
- {name: 🪟 微软服务, type: select, proxies: [🎯 全球直连, 🚀 节点选择]}
- {name: 🇬 谷歌服务, type: select, proxies: [🎯 全球直连, 🚀 节点选择]}
+ - {name: 🎥 奈飞视频, type: select, proxies: [🚀 节点选择, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇯🇵 日本节点, 🇸🇬 新加坡节点, 🇺🇸 美国节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
+ - {name: 📹 油管视频, type: select, proxies: [🚀 节点选择, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇯🇵 日本节点, 🇸🇬 新加坡节点, 🇺🇸 美国节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- {name: 🌍 国外媒体, type: select, proxies: [🚀 节点选择, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇯🇵 日本节点, 🇸🇬 新加坡节点, 🇺🇸 美国节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- {name: 🎮 游戏平台, type: select, proxies: [🚀 节点选择, 🎯 全球直连, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇯🇵 日本节点, 🇸🇬 新加坡节点, 🇺🇸 美国节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- {name: 🍎 苹果服务, type: select, proxies: [🎯 全球直连, 🚀 节点选择]}
@@ -77,6 +79,22 @@ rule-providers:
url: "https://testingcf.jsdelivr.net/gh//DustinWin/ruleset_geodata@refs/heads/mihomo-ruleset/games-cn.mrs"
interval: 86400
+ netflix:
+ type: http
+ behavior: domain
+ format: mrs
+ path: ./ruleset/netflix.mrs
+ url: "https://testingcf.jsdelivr.net/gh//DustinWin/ruleset_geodata@refs/heads/mihomo-ruleset/netflix.mrs"
+ interval: 86400
+
+ youtube:
+ type: http
+ behavior: domain
+ format: mrs
+ path: ./ruleset/youtube.mrs
+ url: "https://testingcf.jsdelivr.net/gh//DustinWin/ruleset_geodata@refs/heads/mihomo-ruleset/youtube.mrs"
+ interval: 86400
+
media:
type: http
behavior: domain
@@ -141,6 +159,14 @@ rule-providers:
url: "https://testingcf.jsdelivr.net/gh//DustinWin/ruleset_geodata@refs/heads/mihomo-ruleset/cnip.mrs"
interval: 86400
+ netflixip:
+ type: http
+ behavior: domain
+ format: mrs
+ path: ./ruleset/netflixip.mrs
+ url: "https://testingcf.jsdelivr.net/gh//DustinWin/ruleset_geodata@refs/heads/mihomo-ruleset/netflixip.mrs"
+ interval: 86400
+
mediaip:
type: http
behavior: ipcidr
@@ -172,6 +198,8 @@ rules:
- RULE-SET,apple-cn,🍎 苹果服务
- RULE-SET,google-cn,🇬 谷歌服务
- RULE-SET,games-cn,🎮 游戏服务
+ - RULE-SET,netflix,🎥 奈飞视频
+ - RULE-SET,youtube,📹 油管视频
- RULE-SET,media,🌍 国外媒体
- RULE-SET,games,🎮 游戏平台
- RULE-SET,ai,🤖 AI 平台
@@ -180,6 +208,7 @@ rules:
- RULE-SET,cn,🛡️ 直连域名
- RULE-SET,privateip,🔒 私有网络,no-resolve
- RULE-SET,cnip,🀄️ 直连 IP
+ - RULE-SET,netflixip,🎥 奈飞视频
- RULE-SET,mediaip,🌍 国外媒体
- RULE-SET,gamesip,🎮 游戏平台
- RULE-SET,telegramip,📲 电报消息,no-resolve
diff --git a/rules/clash_providers/ShellCrash_RS_Full_BanAds.yaml b/rules/clash_providers/ShellCrash_RS_Full_BanAds.yaml
index e959126c..53ee08b2 100644
--- a/rules/clash_providers/ShellCrash_RS_Full_BanAds.yaml
+++ b/rules/clash_providers/ShellCrash_RS_Full_BanAds.yaml
@@ -1,4 +1,4 @@
-#ShellCrash-ruleset 全分组规则+去广告 For mihomo By Maozai 260107
+#ShellCrash-ruleset 全分组规则+去广告 For mihomo By Maozai 260111
#此版本为Maozai根据ACL4SSR规则修改优化而来，尽量在保持原有的基础上进行优化。
#数据源采用了DustinWin/ruleset_geodata和MetaCubeX/meta-rules-dat两个开源项目的规则，感谢原作者的辛勤付出。
@@ -11,12 +11,12 @@ proxy-groups:
- {name: 🚀 节点选择, type: select, proxies: [♻️ 自动选择, ✨ 自动选择（去高倍率）, 🛠️ 手动切换, ⚖️ 负载均衡, 🚑 故障转移, 🎯 本地直连, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇺🇸 美国节点, 🇯🇵 日本节点, 🇪🇺 欧洲节点, 🇰🇷 韩国节点, 🇸🇬 狮城节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- {name: 🛠️ 手动切换, type: select, include-all: true, proxies: [🎯 本地直连, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇺🇸 美国节点, 🇯🇵 日本节点, 🇪🇺 欧洲节点, 🇰🇷 韩国节点, 🇸🇬 狮城节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- {name: ♻️ 自动选择, type: url-test, interval: 1800, tolerance: 50, include-all: true, exclude-filter: "(?i)(剩余|重置|到期|防失联|官网|导航|客服|http|www)"}
- - {name: ✨ 自动选择（去高倍率）, type: url-test, interval: 1800, tolerance: 50, include-all: true, exclude-filter: "(?i)(剩余|重置|到期|防失联|官网|导航|客服|http|www|专线|专用|高级|直连|急速|高速|高倍率|游戏|铂金|钻石|企业|VIP|Ultra|Game|IEPL|IPLC|AIA|BGP|GIA|CN2|CMI|HGC|HKT|CTM|CC|AC|x([2-9]|\\d{2,}))"}
- - {name: ⚖️ 负载均衡, type: load-balance, interval: 1800, include-all: true, hidden: true}
- - {name: 🚑 故障转移, type: fallback, interval: 1800, include-all: true, hidden: true}
-
+ - {name: ✨ 自动选择（去高倍率）, type: url-test, interval: 1800, tolerance: 50, include-all: true, exclude-filter: "(?i)(剩余|重置|到期|防失联|官网|导航|客服|http|www)`(?i)(专线|专用|高级|直连|急速|高速|高倍率|游戏|铂金|钻石|企业|VIP|Ultra|Game|IEPL|IPLC|AIA|BGP|GIA|CN2|CMI|HGC|HKT|CTM|CC|AC|x([2-9]|\\d{2,}))"}
+ - {name: ⚖️ 负载均衡, type: load-balance, interval: 1800, include-all: true, hidden: true, exclude-filter: "(?i)(剩余|重置|到期|防失联|官网|导航|客服|http|www)"}
+ - {name: 🚑 故障转移, type: fallback, interval: 1800, include-all: true, hidden: true, exclude-filter: "(?i)(剩余|重置|到期|防失联|官网|导航|客服|http|www)"}
+ #
- {name: 🤖 AI 平台, type: select, proxies: [🚀 节点选择, 🤖 AI节点（过滤港澳）, 🎯 本地直连, ♻️ 自动选择, 🛠️ 手动切换, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇺🇸 美国节点, 🇯🇵 日本节点, 🇪🇺 欧洲节点, 🇰🇷 韩国节点, 🇸🇬 狮城节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- - {name: 🤖 AI节点（过滤港澳）, type: url-test, interval: 3600, tolerance: 50, include-all: true, exclude-filter: "(?i)(剩余|重置|到期|防失联|官网|导航|客服|http|www|🇭🇰|港|🇲🇴|澳门|hk|hongkong|hong kong)", hidden: true}
+ - {name: 🤖 AI节点（过滤港澳）, type: url-test, interval: 3600, tolerance: 50, include-all: true, exclude-filter: "(?i)(剩余|重置|到期|防失联|官网|导航|客服|http|www)`(?i)(🇭🇰|港|🇲🇴|澳门|hk|hongkong|hong kong)", hidden: true}
- {name: 🎬 奈飞视频, type: select, proxies: [🚀 节点选择, 🎬 奈飞节点, 🎯 本地直连, ♻️ 自动选择, 🛠️ 手动切换, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇺🇸 美国节点, 🇯🇵 日本节点, 🇪🇺 欧洲节点, 🇰🇷 韩国节点, 🇸🇬 狮城节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
- {name: 🎬 奈飞节点, type: url-test, interval: 1800, tolerance: 50, include-all: true, filter: "(?i)(NF|奈飞|解锁|Netflix|NETFLIX|Media)", hidden: true}
- {name: ▶️ 油管视频, type: select, proxies: [🚀 节点选择, 🎯 本地直连, ♻️ 自动选择, 🛠️ 手动切换, 🇭🇰 香港节点, 🇹🇼 台湾节点, 🇺🇸 美国节点, 🇯🇵 日本节点, 🇪🇺 欧洲节点, 🇰🇷 韩国节点, 🇸🇬 狮城节点, 👑 高级节点, 📉 省流节点, {providers_tags}]}
@@ -45,10 +45,10 @@ proxy-groups:
- {name: 🎯 本地直连, type: select, proxies: [DIRECT], hidden: true}
- {name: 🇭🇰 香港节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇭🇰|港|hk|hongkong|hong kong)"}
- - {name: 🇹🇼 台湾节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇹🇼|台|tw|taiwan|tai wan)"}
- - {name: 🇺🇸 美国节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇺🇸|美|洛杉矶|圣何塞|西雅图|纽约|波特兰|旧金山|us|unitedstates|united states)"}
- - {name: 🇯🇵 日本节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇯🇵|日|东京|大阪|埼玉|九州|jp|japan)"}
- - {name: 🇪🇺 欧洲节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇪🇺|欧|德|英|法|荷|俄罗斯|西班牙|意大利|瑞士|瑞典|土耳其|挪威|芬兰|丹麦|比利时|爱尔兰|奥地利|波兰|葡萄牙|乌克兰|希腊|捷克|匈牙利|罗马尼亚|保加利亚|冰岛|克罗地亚)"}
+ - {name: 🇹🇼 台湾节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇹🇼|台|tw|taiwan|tai wan)", exclude-filter: "(?i)(仙台)"}
+ - {name: 🇺🇸 美国节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇺🇸|美|洛杉矶|圣何塞|西雅图|纽约|波特兰|旧金山|休斯|达拉斯|硅谷|堪萨斯|迈阿密|凤凰城|芝加哥|奥勒姆|us|unitedstates|united states)", exclude-filter: "(?i)(南美|中美|拉美|亚美尼亚|美属)"}
+ - {name: 🇯🇵 日本节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇯🇵|日|东京|大阪|埼玉|九州|仙台|jp|japan)", exclude-filter: "(?i)(尼日利亚|尼日尔|日内瓦)"}
+ - {name: 🇪🇺 欧洲节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇪🇺|欧|德|英|法|荷|俄罗斯|西班牙|意大利|瑞士|瑞典|土耳其|挪威|芬兰|丹麦|比利时|爱尔兰|奥地利|波兰|葡萄牙|乌克兰|希腊|捷克|匈牙利|罗马尼亚|保加利亚|冰岛|克罗地亚|阿姆斯特丹)"}
- {name: 🇰🇷 韩国节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇰🇷|韩|韓|首尔|kr|kor)"}
- {name: 🇸🇬 狮城节点, type: url-test, tolerance: 50, include-all: true, filter: "(?i)(🇸🇬|新加坡|狮城|sg|singapore)"}
@@ -221,8 +221,8 @@ rule-providers:
#规则顺序
rules:
- - DOMAIN-SUFFIX,captive.apple.com,DIRECT
- - DOMAIN-SUFFIX,kamo.teracloud.jp,DIRECT
+ - DOMAIN-SUFFIX,captive.apple.com,🍎 苹果服务
+ - DOMAIN-SUFFIX,kamo.teracloud.jp,🀄️ 国内流量
- RULE-SET,privateip,🔒 私有网络,no-resolve
- RULE-SET,private,🔒 私有网络
diff --git a/rules/singbox_providers/DustinWin_RS_Full.json b/rules/singbox_providers/DustinWin_RS_Full.json
index d2254cbd..69ff4d98 100644
--- a/rules/singbox_providers/DustinWin_RS_Full.json
+++ b/rules/singbox_providers/DustinWin_RS_Full.json
@@ -9,6 +9,8 @@
{ "tag": "🪟 微软服务", "type": "selector", "outbounds": [ "🎯 本地直连", "🚀 节点选择" ] },
{ "tag": "🇬 谷歌服务", "type": "selector", "outbounds": [ "🎯 本地直连", "🚀 节点选择" ] },
{ "tag": "🍎 苹果服务", "type": "selector", "outbounds": [ "🎯 本地直连", "🚀 节点选择" ] },
+ { "tag": "🎥 奈飞视频", "type": "selector", "outbounds": [ "🚀 节点选择", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇯🇵 日本节点", "🇸🇬 新加坡节点", "🇺🇸 美国节点", "👑 高级节点", "📉 省流节点", {providers_tags} ] },
+ { "tag": "📹 油管视频", "type": "selector", "outbounds": [ "🚀 节点选择", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇯🇵 日本节点", "🇸🇬 新加坡节点", "🇺🇸 美国节点", "👑 高级节点", "📉 省流节点", {providers_tags} ] },
{ "tag": "🌍 国外媒体", "type": "selector", "outbounds": [ "🚀 节点选择", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇯🇵 日本节点", "🇸🇬 新加坡节点", "🇺🇸 美国节点", "👑 高级节点", "📉 省流节点", {providers_tags} ] },
{ "tag": "🎮 游戏平台", "type": "selector", "outbounds": [ "🚀 节点选择", "🎯 本地直连", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇯🇵 日本节点", "🇸🇬 新加坡节点", "🇺🇸 美国节点", "👑 高级节点", "📉 省流节点", {providers_tags} ] },
{ "tag": "🛡️ 直连域名", "type": "selector", "outbounds": [ "🎯 本地直连", "🚀 节点选择" ] },
@@ -39,6 +41,8 @@
{ "rule_set": [ "apple-cn" ], "outbound": "🍎 苹果服务" },
{ "rule_set": [ "google-cn" ], "outbound": "🇬 谷歌服务" },
{ "rule_set": [ "games-cn" ], "outbound": "🎮 游戏服务" },
+ { "rule_set": [ "netflix" ], "outbound": "🎥 奈飞视频" },
+ { "rule_set": [ "youtube" ], "outbound": "📹 油管视频" },
{ "rule_set": [ "media" ], "outbound": "🌍 国外媒体" },
{ "rule_set": [ "games" ], "outbound": "🎮 游戏平台" },
{ "rule_set": [ "ai" ], "outbound": "🤖 AI 平台" },
@@ -50,6 +54,7 @@
{ "action": "resolve", "server": "dns_proxy", "strategy": "prefer_ipv4", "match_only": true},
{ "rule_set": [ "cnip" ], "outbound": "🀄️ 直连 IP" },
+ { "rule_set": [ "netflixip" ], "outbound": "🎥 奈飞视频" },
{ "rule_set": [ "mediaip" ], "outbound": "🌍 国外媒体" },
{ "rule_set": [ "gamesip" ], "outbound": "🎮 游戏平台" }
],
@@ -110,6 +115,22 @@
"url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/games-cn.srs",
"download_detour": "DIRECT"
},
+ {
+ "tag": "netflix",
+ "type": "remote",
+ "format": "binary",
+ "path": "./ruleset/netflix.srs",
+ "url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/netflix.srs",
+ "download_detour": "DIRECT"
+ },
+ {
+ "tag": "youtube",
+ "type": "remote",
+ "format": "binary",
+ "path": "./ruleset/youtube.srs",
+ "url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/youtube.srs",
+ "download_detour": "DIRECT"
+ },
{
"tag": "media",
"type": "remote",
@@ -174,6 +195,14 @@
"url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/cnip.srs",
"download_detour": "DIRECT"
},
+ {
+ "tag": "netflixip",
+ "type": "remote",
+ "format": "binary",
+ "path": "./ruleset/netflixip.srs",
+ "url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/netflixip.srs",
+ "download_detour": "DIRECT"
+ },
{
"tag": "mediaip",
"type": "remote",
diff --git a/rules/singbox_providers/DustinWin_RS_Full_NoAds.json b/rules/singbox_providers/DustinWin_RS_Full_NoAds.json
index 4cae3ed6..657e3ba5 100644
--- a/rules/singbox_providers/DustinWin_RS_Full_NoAds.json
+++ b/rules/singbox_providers/DustinWin_RS_Full_NoAds.json
@@ -9,6 +9,8 @@
{ "tag": "🪟 微软服务", "type": "selector", "outbounds": [ "🎯 本地直连", "🚀 节点选择" ] },
{ "tag": "🇬 谷歌服务", "type": "selector", "outbounds": [ "🎯 本地直连", "🚀 节点选择" ] },
{ "tag": "🍎 苹果服务", "type": "selector", "outbounds": [ "🎯 本地直连", "🚀 节点选择" ] },
+ { "tag": "🎥 奈飞视频", "type": "selector", "outbounds": [ "🚀 节点选择", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇯🇵 日本节点", "🇸🇬 新加坡节点", "🇺🇸 美国节点", "👑 高级节点", "📉 省流节点", {providers_tags} ] },
+ { "tag": "📹 油管视频", "type": "selector", "outbounds": [ "🚀 节点选择", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇯🇵 日本节点", "🇸🇬 新加坡节点", "🇺🇸 美国节点", "👑 高级节点", "📉 省流节点", {providers_tags} ] },
{ "tag": "🌍 国外媒体", "type": "selector", "outbounds": [ "🚀 节点选择", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇯🇵 日本节点", "🇸🇬 新加坡节点", "🇺🇸 美国节点", "👑 高级节点", "📉 省流节点", {providers_tags} ] },
{ "tag": "🎮 游戏平台", "type": "selector", "outbounds": [ "🚀 节点选择", "🎯 本地直连", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇯🇵 日本节点", "🇸🇬 新加坡节点", "🇺🇸 美国节点", "👑 高级节点", "📉 省流节点", {providers_tags} ] },
{ "tag": "🛡️ 直连域名", "type": "selector", "outbounds": [ "🎯 本地直连", "🚀 节点选择" ] },
@@ -36,6 +38,8 @@
{ "rule_set": [ "apple-cn" ], "outbound": "🍎 苹果服务" },
{ "rule_set": [ "google-cn" ], "outbound": "🇬 谷歌服务" },
{ "rule_set": [ "games-cn" ], "outbound": "🎮 游戏服务" },
+ { "rule_set": [ "netflix" ], "outbound": "🎥 奈飞视频" },
+ { "rule_set": [ "youtube" ], "outbound": "📹 油管视频" },
{ "rule_set": [ "media" ], "outbound": "🌍 国外媒体" },
{ "rule_set": [ "games" ], "outbound": "🎮 游戏平台" },
{ "rule_set": [ "ai" ], "outbound": "🤖 AI 平台" },
@@ -47,6 +51,7 @@
{ "action": "resolve", "server": "dns_proxy", "strategy": "prefer_ipv4", "match_only": true},
{ "rule_set": [ "cnip" ], "outbound": "🀄️ 直连 IP" },
+ { "rule_set": [ "netflixip" ], "outbound": "🎥 奈飞视频" },
{ "rule_set": [ "mediaip" ], "outbound": "🌍 国外媒体" },
{ "rule_set": [ "gamesip" ], "outbound": "🎮 游戏平台" }
],
@@ -99,6 +104,22 @@
"url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/games-cn.srs",
"download_detour": "DIRECT"
},
+ {
+ "tag": "netflix",
+ "type": "remote",
+ "format": "binary",
+ "path": "./ruleset/netflix.srs",
+ "url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/netflix.srs",
+ "download_detour": "DIRECT"
+ },
+ {
+ "tag": "youtube",
+ "type": "remote",
+ "format": "binary",
+ "path": "./ruleset/youtube.srs",
+ "url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/youtube.srs",
+ "download_detour": "DIRECT"
+ },
{
"tag": "media",
"type": "remote",
@@ -163,6 +184,14 @@
"url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/cnip.srs",
"download_detour": "DIRECT"
},
+ {
+ "tag": "netflixip",
+ "type": "remote",
+ "format": "binary",
+ "path": "./ruleset/netflixip.srs",
+ "url": "https://testingcf.jsdelivr.net/gh/DustinWin/ruleset_geodata@sing-box-ruleset/netflixip.srs",
+ "download_detour": "DIRECT"
+ },
{
"tag": "mediaip",
"type": "remote",
diff --git a/rules/singbox_providers/ShellCrash_RS_Full_BanAds.json b/rules/singbox_providers/ShellCrash_RS_Full_BanAds.json
index d771d946..2e4fc53f 100644
--- a/rules/singbox_providers/ShellCrash_RS_Full_BanAds.json
+++ b/rules/singbox_providers/ShellCrash_RS_Full_BanAds.json
@@ -1,4 +1,4 @@
-//ShellCrash-ruleset 全分组规则+去广告 For Sing-box By Maozai 260107
+//ShellCrash-ruleset 全分组规则+去广告 For Sing-box By Maozai 260111
{
"outbounds": [
{ "tag": "🚀 节点选择", "type": "selector", "outbounds": ["♻️ 自动选择", "✨ 自动选择（去高倍率）", "🛠️ 手动切换", "🎯 本地直连", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇺🇸 美国节点", "🇯🇵 日本节点", "🇪🇺 欧洲节点", "🇰🇷 韩国节点", "🇸🇬 狮城节点", "👑 高级节点", "📉 省流节点", {providers_tags}] },
@@ -28,19 +28,18 @@
{ "tag": "🀄️ 国内流量", "type": "selector", "outbounds": ["🎯 本地直连", "🚀 节点选择", "♻️ 自动选择", "🛠️ 手动切换", {providers_tags}] },
{ "tag": "🐟 漏网之鱼", "type": "selector", "outbounds": ["🚀 节点选择", "🎯 本地直连", "♻️ 自动选择", "🛠️ 手动切换", "🇭🇰 香港节点", "🇹🇼 台湾节点", "🇺🇸 美国节点", "🇯🇵 日本节点", "🇪🇺 欧洲节点", "🇰🇷 韩国节点", "🇸🇬 狮城节点", "👑 高级节点", "📉 省流节点", {providers_tags}] },
-
-
- { "tag": "🛑 广告拦截", "type": "selector", "outbounds": ["⛔ 禁止连接","🔀 规则放行", "🎯 本地直连"] },
+
+ { "tag": "🛑 广告拦截", "type": "selector", "outbounds": ["⛔ 禁止连接", "🔀 规则放行", "🎯 本地直连"] },
{ "tag": "⛔ 禁止连接", "type": "block" },
{ "tag": "🔀 规则放行", "type": "pass" },
{ "tag": "🎯 本地直连", "type": "direct" },
- { "tag": "GLOBAL", "type": "selector", "outbounds": [ "🚀 节点选择", "🎯 本地直连" ] },
+ { "tag": "GLOBAL", "type": "selector", "outbounds": ["🚀 节点选择", "🎯 本地直连"] },
{ "tag": "🇭🇰 香港节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇭🇰|港|hk|hongkong|hong kong)" },
- { "tag": "🇹🇼 台湾节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇹🇼|台|tw|taiwan|tai wan)" },
- { "tag": "🇺🇸 美国节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇺🇸|美|洛杉矶|圣何塞|西雅图|纽约|波特兰|旧金山|us|unitedstates|united states)" },
- { "tag": "🇯🇵 日本节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇯🇵|日|东京|大阪|埼玉|九州|jp|japan)" },
- { "tag": "🇪🇺 欧洲节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇪🇺|欧|德|英|法|荷|俄罗斯|西班牙|意大利|瑞士|瑞典|土耳其|挪威|芬兰|丹麦|比利时|爱尔兰|奥地利|波兰|葡萄牙|乌克兰|希腊|捷克|匈牙利|罗马尼亚|保加利亚|冰岛|克罗地亚)" },
+ { "tag": "🇹🇼 台湾节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇹🇼|台|tw|taiwan|tai wan)", "exclude": "(?i)(仙台)" },
+ { "tag": "🇺🇸 美国节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇺🇸|美|洛杉矶|圣何塞|西雅图|纽约|波特兰|旧金山|休斯|达拉斯|硅谷|堪萨斯|迈阿密|凤凰城|芝加哥|奥勒姆|us|unitedstates|united states)", "exclude": "(?i)(南美|中美|拉美|亚美尼亚|美属)" },
+ { "tag": "🇯🇵 日本节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇯🇵|日|东京|大阪|埼玉|九州|jp|japan)", "exclude": "(?i)(尼日利亚|尼日尔|日内瓦)" },
+ { "tag": "🇪🇺 欧洲节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇪🇺|欧|德|英|法|荷|俄罗斯|西班牙|意大利|瑞士|瑞典|土耳其|挪威|芬兰|丹麦|比利时|爱尔兰|奥地利|波兰|葡萄牙|乌克兰|希腊|捷克|匈牙利|罗马尼亚|保加利亚|冰岛|克罗地亚|阿姆斯特丹)" },
{ "tag": "🇰🇷 韩国节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇰🇷|韩|韓|首尔|kr|kor)" },
{ "tag": "🇸🇬 狮城节点", "type": "urltest", "use_all_providers": true, "include": "(?i)(🇸🇬|新加坡|狮城|sg|singapore)" },
@@ -49,9 +48,9 @@
],
"route": {
"rules": [
- { "domain_suffix": ["captive.apple.com"], "outbound": "DIRECT" },
- { "domain_suffix": ["kamo.teracloud.jp"], "outbound": "DIRECT" },
-
+ { "domain_suffix": ["captive.apple.com"], "outbound": "🍎 苹果服务" },
+ { "domain_suffix": ["kamo.teracloud.jp"], "outbound": "🀄️ 国内流量" },
+
{ "rule_set": ["private"], "outbound": "🎯 本地直连" },
{ "rule_set": ["ads"], "outbound": "🛑 广告拦截" },
diff --git a/scripts/lang/chs/menu.lang b/scripts/lang/chs/menu.lang
new file mode 100644
index 00000000..f52be2b5
--- /dev/null
+++ b/scripts/lang/chs/menu.lang
@@ -0,0 +1,85 @@
+# ===== 通用提示 =====
+MENU_ERR_INPUT="请输入正确的字母或数字！"
+
+MENU_RESTART_NOTICE="检测到已变更的内容，请重启服务！"
+MENU_RESTART_ASK="是否现在重启服务？(1/0) > "
+
+MENU_PORT_CONFLICT_TITLE="检测到端口被以下进程占用！内核可能无法正常启动！"
+MENU_PORT_CONFLICT_HINT="请修改默认端口配置！"
+
+MENU_CORE_LOADED_OK="内核加载完成！"
+MENU_CORE_LOADED_BAD="检测到不可用的内核文件！可能是文件受损或CPU架构不匹配！"
+MENU_CORE_REMOVED="内核文件已移除，请认真检查后重新上传！"
+
+MENU_CFG_LOADED_OK="配置文件加载完成！"
+
+MENU_OVERRIDE_WARN="你已经禁用了配置文件覆写功能，这会导致大量脚本功能无法使用！"
+MENU_OVERRIDE_ASK="是否取消禁用？"
+
+# ===== 欢迎与状态 =====
+MENU_WELCOME="欢迎使用ShellCrash！"
+MENU_VERSION_LABEL="版本："
+
+MENU_RUN_ON="正在运行"
+MENU_RUN_SET="已设置"
+MENU_RUN_OFF="没有运行"
+
+MENU_IP_DF="设备IP地址"
+
+MENU_AUTOSTART_ON="已设置开机启动！"
+MENU_AUTOSTART_OFF="未设置开机启动！"
+MENU_AUTOSTART_DEBUG="并处于debug状态！"
+
+MENU_MEM_USED="当前内存占用："
+MENU_RUNNING_TIME="已运行："
+
+MENU_TG_CHANNEL="TG频道："
+MENU_TG_URL="https://t.me/ShellClash"
+
+# ===== /tmp 文件检测 =====
+MENU_TMP_CORE_FOUND="发现可用的内核文件："
+MENU_TMP_CORE_ASK="是否加载(会停止当前服务)？"
+
+MENU_TMP_CFG_FOUND="发现内核配置文件："
+MENU_TMP_CFG_ASK="是否加载为配置文件？(1/0) > "
+
+MENU_MAIN_1="启动/重启服务"
+MENU_MAIN_2="功能设置"
+MENU_MAIN_3="停止服务"
+MENU_MAIN_4="启动设置"
+MENU_MAIN_5="自动任务"
+MENU_MAIN_6="配置文件管理"
+MENU_MAIN_7="访问与控制"
+MENU_MAIN_8="工具与优化"
+MENU_MAIN_9="更新与支持"
+MENU_MAIN_0="退出脚本"
+
+MENU_MAIN_PROMPT="请输入对应数字 > "
+
+# ===== 服务操作 =====
+MENU_SERVICE_STOPPED="服务已停止！"
+
+# ===== 测试 / 调试 =====
+MENU_TEST_RUNNING="正在测试运行！如发现错误请截图后前往咨询"
+MENU_TEST_DONE_OK="测试完成！没有发现问题，请重新启动服务~"
+MENU_TEST_DONE_FAIL="测试完成！"
+MENU_TEST_LOG_HINT="完整执行记录请查看："
+
+MENU_ERROR_FOUND="发现错误："
+
+# ===== 命令行帮助 =====
+MENU_CLI_WELCOME="欢迎使用ShellCrash"
+
+MENU_CLI_TEST="测试模式"
+MENU_CLI_HELP="帮助列表"
+MENU_CLI_UNINSTALL="卸载脚本"
+MENU_CLI_INIT="初始化脚本"
+MENU_CLI_DEBUG="测试运行"
+
+MENU_CLI_START="启动服务"
+MENU_CLI_STOP="停止服务"
+MENU_CLI_BOOT_INIT="开机初始化"
+
+MENU_HELP_ONLINE="在线求助："
+MENU_HELP_BLOG="官方博客："
+MENU_HELP_GITHUB="发布页面："
\ No newline at end of file
diff --git a/scripts/lang/en/menu.lang b/scripts/lang/en/menu.lang
new file mode 100644
index 00000000..4e4f1f38
--- /dev/null
+++ b/scripts/lang/en/menu.lang
@@ -0,0 +1,86 @@
+# ===== Common Prompts =====
+MENU_ERR_INPUT="Please enter a valid letter or number!"
+
+MENU_RESTART_NOTICE="Changes have been detected. Please restart the service!"
+MENU_RESTART_ASK="Restart the service now? (1/0) > "
+
+MENU_PORT_CONFLICT_TITLE="The port is occupied by the following process. The core may fail to start!"
+MENU_PORT_CONFLICT_HINT="Please modify the default port configuration!"
+
+MENU_CORE_LOADED_OK="Core loaded successfully!"
+MENU_CORE_LOADED_BAD="The core file is invalid. It may be corrupted or incompatible with the CPU architecture!"
+MENU_CORE_REMOVED="The core file has been removed. Please verify and upload it again!"
+
+MENU_CFG_LOADED_OK="Configuration file loaded successfully!"
+
+MENU_OVERRIDE_WARN="You have disabled configuration overwrite. This will cause many features to be unavailable!"
+MENU_OVERRIDE_ASK="Cancel the disable setting?"
+
+# ===== Welcome & Status =====
+MENU_WELCOME="Welcome to ShellCrash!"
+MENU_VERSION_LABEL="Version:"
+
+MENU_RUN_ON="Running"
+MENU_RUN_SET="Configured"
+MENU_RUN_OFF="Not running"
+
+MENU_IP_DF="Device IP Address"
+
+MENU_AUTOSTART_ON="Autostart is enabled!"
+MENU_AUTOSTART_OFF="Autostart is disabled!"
+MENU_AUTOSTART_DEBUG="Running in debug mode!"
+
+MENU_MEM_USED="Memory usage:"
+MENU_RUNNING_TIME="Running time:"
+
+MENU_TG_CHANNEL="Telegram Channel:"
+MENU_TG_URL="https://t.me/ShellClash"
+
+# ===== /tmp File Detection =====
+MENU_TMP_CORE_FOUND="Available core file found:"
+MENU_TMP_CORE_ASK="Load this core file? (The current service will be stopped)"
+
+MENU_TMP_CFG_FOUND="Kernel configuration file found:"
+MENU_TMP_CFG_ASK="Load as the configuration file? (1/0) > "
+
+# ===== Main Menu =====
+MENU_MAIN_1="Start / Restart Service"
+MENU_MAIN_2="Feature Settings"
+MENU_MAIN_3="Stop Service"
+MENU_MAIN_4="Startup Settings"
+MENU_MAIN_5="Scheduled Tasks"
+MENU_MAIN_6="Configuration Management"
+MENU_MAIN_7="Access & Control"
+MENU_MAIN_8="Tools & Optimization"
+MENU_MAIN_9="Updates & Support"
+MENU_MAIN_0="Exit Script"
+
+MENU_MAIN_PROMPT="Please enter a number > "
+
+# ===== Service Operations =====
+MENU_SERVICE_STOPPED="Service has been stopped!"
+
+# ===== Test / Debug =====
+MENU_TEST_RUNNING="Running test mode. If errors occur, please take a screenshot and seek assistance."
+MENU_TEST_DONE_OK="Test completed! No issues found. Please restart the service."
+MENU_TEST_DONE_FAIL="Test completed!"
+MENU_TEST_LOG_HINT="Full execution log can be found at:"
+
+MENU_ERROR_FOUND="Error found:"
+
+# ===== Command Line Help =====
+MENU_CLI_WELCOME="Welcome to ShellCrash"
+
+MENU_CLI_TEST="Test Mode"
+MENU_CLI_HELP="Help List"
+MENU_CLI_UNINSTALL="Uninstall Script"
+MENU_CLI_INIT="Initialize Script"
+MENU_CLI_DEBUG="Debug Mode"
+
+MENU_CLI_START="Start Service"
+MENU_CLI_STOP="Stop Service"
+MENU_CLI_BOOT_INIT="Boot Initialization"
+
+MENU_HELP_ONLINE="Online Support:"
+MENU_HELP_BLOG="Official Blog:"
+MENU_HELP_GITHUB="Release Page:"
diff --git a/scripts/libs/i18n.sh b/scripts/libs/i18n.sh
new file mode 100644
index 00000000..efaa52ee
--- /dev/null
+++ b/scripts/libs/i18n.sh
@@ -0,0 +1,8 @@
+
+load_lang() {
+ i18n=$(cat "$CRASHDIR"/configs/i18n.cfg 2>/dev/null)
+ [ -z "$i18n" ] && i18n=chs
+
+ file="$CRASHDIR/lang/$i18n/$1.lang"
+ [ -s "$file" ] && . "$file"
+}
\ No newline at end of file
diff --git a/scripts/libs/sb_endpoints.sh b/scripts/libs/sb_endpoints.sh
index 55751cfb..820a8500 100644
--- a/scripts/libs/sb_endpoints.sh
+++ b/scripts/libs/sb_endpoints.sh
@@ -2,7 +2,10 @@
# Copyright (C) Juewuy
[ "$ts_service" = ON ] && {
- [ "$ts_subnet" = true ] && advertise_routes='"10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"'
+ [ "$ts_subnet" = true ] && {
+ . "$CRASHDIR"/starts/fw_getlanip.sh && getlanip
+ advertise_routes=$(echo "$host_ipv4"|sed 's/[[:space:]]\+/", "/g; s/^/"/; s/$/"/')
+ }
[ -z "$ts_exit_node" ] && ts_exit_node=false
[ -z "$ts_hostname" ] && ts_hostname='ShellCrash'
cat >"$TMPDIR"/jsons/tailscale.json </dev/null 2>&1
[ ! -f "$TMPDIR" ] && mkdir -p "$TMPDIR"
-#通用工具
+# 通用工具
. "$CRASHDIR"/libs/set_config.sh
. "$CRASHDIR"/libs/check_cmd.sh
. "$CRASHDIR"/libs/check_autostart.sh
+. "$CRASHDIR"/libs/i18n.sh
. "$CRASHDIR"/menus/1_start.sh
. "$CRASHDIR"/menus/running_status.sh
+
+# 加载语言
+load_lang common
+load_lang menu
+
errornum() {
echo "-----------------------------------------------"
- echo -e "\033[31m请输入正确的字母或数字！\033[0m"
+ echo -e "\033[31m$MENU_ERR_INPUT\033[0m"
}
+
checkrestart() {
echo "-----------------------------------------------"
- echo -e "\033[32m检测到已变更的内容，请重启服务！\033[0m"
+ echo -e "\033[32m$MENU_RESTART_NOTICE\033[0m"
echo "-----------------------------------------------"
- read -p "是否现在重启服务？(1/0) > " res
+ read -p "$MENU_RESTART_ASK" res
[ "$res" = 1 ] && start_service
}
checkport() { #检查端口冲突
for portx in $dns_port $mix_port $redir_port $((redir_port + 1)) $db_port; do
- if [ -n "$(netstat -ntul 2>&1 | grep ':$portx ')" ]; then
+ if [ -n "$(netstat -ntul 2>&1 | grep ":$portx ")" ]; then
echo "-----------------------------------------------"
- echo -e "检测到端口【$portx】被以下进程占用！内核可能无法正常启动！\033[33m"
- echo $(netstat -ntul | grep :$portx | head -n 1)
- echo -e "\033[0m-----------------------------------------------"
- echo -e "\033[36m请修改默认端口配置！\033[0m"
+ echo -e "【$portx】: $MENU_PORT_CONFLICT_TITLE"
+ echo -e "\033[0m$(netstat -ntul | grep ":$portx" | head -n 1)\033[0m"
+ echo "-----------------------------------------------"
+ echo -e "\033[36m$MENU_PORT_CONFLICT_HINT\033[0m"
. "$CRASHDIR"/menus/2_settings.sh && set_adv_config
. "$CRASHDIR"/libs/get_config.sh
checkport
@@ -46,18 +54,19 @@ checkport() { #检查端口冲突
ckstatus() { #脚本启动前检查
#检查脚本配置文件
if [ -f "$CFG_PATH" ]; then
- [ -n "$(awk 'a[$0]++' $CFG_PATH)" ] && awk '!a[$0]++' "$CFG_PATH" >"$CFG_PATH" #检查重复行并去除
+ [ -n "$(awk 'a[$0]++' "$CFG_PATH")" ] && awk '!a[$0]++' "$CFG_PATH" >"$CFG_PATH"
else
. "$CRASHDIR"/init.sh >/dev/null 2>&1
fi
+
versionsh=$(cat "$CRASHDIR"/version)
[ -n "$versionsh" ] && versionsh_l=$versionsh
- [ -z "$redir_mod" ] && redir_mod=纯净模式
+ [ -z "$redir_mod" ] && redir_mod="纯净模式"
#获取本机host地址
[ -z "$host" ] && host=$(ubus call network.interface.lan status 2>&1 | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}')
[ -z "$host" ] && host=$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep 'lan' | grep -E ' 1(92|0|72)\.' | sed 's/.*inet.//g' | sed 's/\/[0-9][0-9].*$//g' | head -n 1)
[ -z "$host" ] && host=$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep -E ' 1(92|0|72)\.' | sed 's/.*inet.//g' | sed 's/\/[0-9][0-9].*$//g' | head -n 1)
- [ -z "$host" ] && host='设备IP地址'
+ [ -z "$host" ] && host='$MENU_IP_DF'
#dashboard目录位置
if [ -f /www/clash/index.html ]; then
dbdir=/www/clash
@@ -66,60 +75,60 @@ ckstatus() { #脚本启动前检查
dbdir="$CRASHDIR"/ui
hostdir=":$db_port/ui"
fi
- #开机自启检测
+
if check_autostart; then
- auto="\033[32m已设置开机启动！\033[0m"
- auto1="\033[36m禁用\033[0mShellCrash开机启动"
+ auto="\033[32m$MENU_AUTOSTART_ON\033[0m"
else
- auto="\033[31m未设置开机启动！\033[0m"
- auto1="\033[36m允许\033[0mShellCrash开机启动"
+ auto="\033[31m$MENU_AUTOSTART_OFF\033[0m"
fi
- #获取运行状态
+
PID=$(pidof CrashCore | awk '{print $NF}')
if [ -n "$PID" ]; then
- run="\033[32m正在运行（$redir_mod）\033[0m"
+ run="\033[32m$MENU_RUN_ON（$redir_mod）\033[0m"
running_status
elif [ "$firewall_area" = 5 ] && [ -n "$(ip route list table 100)" ]; then
- run="\033[32m已设置（$redir_mod）\033[0m"
+ run="\033[32m$MENU_RUN_SET（$redir_mod）\033[0m"
else
- run="\033[31m没有运行（$redir_mod）\033[0m"
+ run="\033[31m$MENU_RUN_OFF（$redir_mod）\033[0m"
#检测系统端口占用
checkport
fi
corename=$(echo $crashcore | sed 's/singboxr/SingBoxR/' | sed 's/singbox/SingBox/' | sed 's/clash/Clash/' | sed 's/meta/Mihomo/')
- [ "$firewall_area" = 5 ] && corename='转发'
- [ -f "$TMPDIR"/debug.log -o -f "$CRASHDIR"/debug.log -a -n "$PID" ] && auto="\033[33m并处于debug状态！\033[0m"
+ #[ "$firewall_area" = 5 ] && corename='转发'
+ [ -f "$TMPDIR"/debug.log -o -f "$CRASHDIR"/debug.log -a -n "$PID" ] && auto="\033[33m$MENU_AUTOSTART_DEBUG\033[0m"
#输出状态
echo "-----------------------------------------------"
- echo -e "\033[30;46m欢迎使用ShellCrash！\033[0m 版本：$versionsh_l"
- echo -e "$corename服务$run，$auto"
+ echo -e "\033[30;46m$MENU_WELCOME\033[0m $MENU_VERSION_LABEL$versionsh_l"
+ echo -e "$corename $run，$auto"
+
if [ -n "$PID" ]; then
- echo -e "当前内存占用：\033[44m"$VmRSS"\033[0m，已运行：\033[46;30m"$day"\033[44;37m"$time"\033[0m"
+ echo -e "$MENU_MEM_USED \033[44m$VmRSS\033[0m，$MENU_RUNNING_TIME \033[46;30m$day\033[44;37m$time\033[0m"
fi
- echo -e "TG频道：\033[36;4mhttps://t.me/ShellClash\033[0m"
+
+ echo -e "$MENU_TG_CHANNEL \033[36;4m$MENU_TG_URL\033[0m"
echo "-----------------------------------------------"
#检查新手引导
if [ -z "$userguide" ]; then
+ . "$CRASHDIR"/menus/userguide.sh && userguide
setconfig userguide 1
- . "$CRASHDIR"/menus/8_tools.sh && userguide
fi
#检查执行权限
[ ! -x "$CRASHDIR"/start.sh ] && chmod +x "$CRASHDIR"/start.sh
#检查/tmp内核文件
for file in $(ls /tmp | grep -v [/$] | grep -v ' ' | grep -Ev ".*(zip|7z|tar)$" | grep -iE 'CrashCore|^clash$|^clash-linux.*|^mihomo.*|^sing.*box|meta.*'); do
- echo -e "发现可用的内核文件： \033[36m/tmp/$file\033[0m "
- read -p "是否加载(会停止当前服务)？(1/0) > " res
+ echo -e "$MENU_TMP_CORE_FOUND \033[36m/tmp/$file\033[0m "
+ read -p "$MENU_TMP_CORE_ASK(1/0) > " res
[ "$res" = 1 ] && {
zip_type=$(echo "$file" | grep -oE 'tar.gz$|upx$|gz$')
. "$CRASHDIR"/menus/9_upgrade.sh && setcoretype
. "$CRASHDIR"/libs/core_tools.sh && core_check "/tmp/$file"
if [ "$?" = 0 ]; then
- echo -e "\033[32m内核加载完成！\033[0m "
+ echo -e "\033[32m$MENU_CORE_LOADED_OK\033[0m "
switch_core
else
- echo -e "\033[33m检测到不可用的内核文件！可能是文件受损或CPU架构不匹配！\033[0m"
+ echo -e "\033[33m$MENU_CORE_LOADED_BAD033[0m"
rm -rf /tmp/"$file"
- echo -e "\033[33m内核文件已移除，请认真检查后重新上传！\033[0m"
+ echo -e "\033[33m$MENU_CORE_REMOVED\033[0m"
fi
sleep 1
}
@@ -128,44 +137,43 @@ ckstatus() { #脚本启动前检查
#检查/tmp配置文件
for file in $(ls /tmp | grep -v [/$] | grep -v ' ' | grep -iE 'config.yaml$|config.yml$|config.json$'); do
tmp_file=/tmp/$file
- echo -e "发现内核配置文件： \033[36m/tmp/$file\033[0m "
- read -p "是否加载为$crashcore的配置文件？(1/0) > " res
+ echo -e "$MENU_TMP_CFG_FOUND \033[36m/tmp/$file\033[0m "
+ read -p "$MENU_TMP_CFG_ASK(1/0) > " res
[ "$res" = 1 ] && {
if [ -n "$(echo /tmp/$file | grep -iE '.json$')" ]; then
mv -f /tmp/$file "$CRASHDIR"/jsons/config.json
else
mv -f /tmp/$file "$CRASHDIR"/yamls/config.yaml
fi
- echo -e "\033[32m配置文件加载完成！\033[0m "
+ echo -e "\033[32m$MENU_CFG_LOADED_OK\033[0m "
sleep 1
}
done
#检查禁用配置覆写
[ "$disoverride" = "1" ] && {
- echo -e "\033[33m你已经禁用了配置文件覆写功能，这会导致大量脚本功能无法使用！\033[0m "
- read -p "是否取消禁用？(1/0) > " res
+ echo -e "\033[33m$MENU_OVERRIDE_WARN\033[0m "
+ read -p "$MENU_OVERRIDE_ASK(1/0) > " res
[ "$res" = 1 ] && unset disoverride && setconfig disoverride
echo "-----------------------------------------------"
}
}
-#主菜单
main_menu() {
- #############################
ckstatus
- #############################
- echo -e " 1 \033[32m启动/重启服务\033[0m"
- echo -e " 2 \033[36m功能设置\033[0m"
- echo -e " 3 \033[31m停止服务\033[0m"
- echo -e " 4 \033[33m启动设置\033[0m"
- echo -e " 5 设置\033[32m自动任务\033[0m"
- echo -e " 6 管理\033[36m配置文件\033[0m"
- echo -e " 7 \033[33m访问与控制\033[0m"
- echo -e " 8 \033[0m工具与优化\033[0m"
- echo -e " 9 \033[32m更新与支持\033[0m"
+
+ echo -e " 1 \033[32m$MENU_MAIN_1\033[0m"
+ echo -e " 2 \033[36m$MENU_MAIN_2\033[0m"
+ echo -e " 3 \033[31m$MENU_MAIN_3\033[0m"
+ echo -e " 4 \033[33m$MENU_MAIN_4\033[0m"
+ echo -e " 5 \033[32m$MENU_MAIN_5\033[0m"
+ echo -e " 6 \033[36m$MENU_MAIN_6\033[0m"
+ echo -e " 7 \033[33m$MENU_MAIN_7\033[0m"
+ echo -e " 8 $MENU_MAIN_8"
+ echo -e " 9 \033[32m$MENU_MAIN_9\033[0m"
echo "-----------------------------------------------"
- echo -e " 0 \033[0m退出脚本\033[0m"
- read -p "请输入对应数字 > " num
+ echo -e " 0 $MENU_MAIN_0"
+
+ read -p "$MENU_MAIN_PROMPT" num
case "$num" in
0)
@@ -189,7 +197,7 @@ main_menu() {
"$CRASHDIR"/start.sh stop
sleep 1
echo "-----------------------------------------------"
- echo -e "\033[31m$corename服务已停止！\033[0m"
+ echo -e "\033[31m$corename$MENU_SERVICE_STOPPED\033[0m"
main_menu
;;
4)
@@ -255,21 +263,21 @@ case "$1" in
;;
-d)
shtype=sh && [ -n "$(ls -l /bin/sh | grep -o dash)" ] && shtype=bash
- echo -e "正在测试运行！如发现错误请截图后前往\033[32;4mt.me/ShellClash\033[0m咨询"
+ echo -e "$MENU_TEST_RUNNING\033[32;4mt.me/ShellClash\033[0m"
$shtype "$CRASHDIR"/start.sh debug >/dev/null 2>"$TMPDIR"/debug_sh_bug.log
$shtype -x "$CRASHDIR"/start.sh debug >/dev/null 2>"$TMPDIR"/debug_sh.log
echo -----------------------------------------
cat "$TMPDIR"/debug_sh_bug.log | grep 'start\.sh' >"$TMPDIR"/sh_bug
if [ -s "$TMPDIR"/sh_bug ]; then
while read line; do
- echo -e "发现错误：\033[33;4m$line\033[0m"
+ echo -e "$MENU_ERROR_FOUND\033[33;4m$line\033[0m"
grep -A 1 -B 3 "$line" "$TMPDIR"/debug_sh.log
echo -----------------------------------------
done <"$TMPDIR"/sh_bug
rm -rf "$TMPDIR"/sh_bug
- echo -e "\033[32m测试完成！\033[0m完整执行记录请查看：\033[36m$TMPDIR/debug_sh.log\033[0m"
+ echo -e "\033[32m$MENU_TEST_DONE_FAIL\033[0m$MENU_TEST_LOG_HINT\033[36m$TMPDIR/debug_sh.log\033[0m"
else
- echo -e "\033[32m测试完成！没有发现问题，请重新启动服务~\033[0m"
+ echo -e "\033[32m$MENU_TEST_DONE_OK\033[0m"
rm -rf "$TMPDIR"/debug_sh.log
fi
"$CRASHDIR"/start.sh stop
@@ -279,21 +287,21 @@ case "$1" in
;;
*)
echo -----------------------------------------
- echo "欢迎使用ShellCrash"
+ echo "$MENU_CLI_WELCOME"
echo -----------------------------------------
- echo " -t 测试模式"
- echo " -h 帮助列表"
- echo " -u 卸载脚本"
- echo " -i 初始化脚本"
- echo " -d 测试运行"
+ echo " -t $MENU_CLI_TEST"
+ echo " -h $MENU_CLI_HELP"
+ echo " -u $MENU_CLI_UNINSTALL"
+ echo " -i $MENU_CLI_INIT"
+ echo " -d $MENU_CLI_DEBUG"
echo -----------------------------------------
- echo " crash -s start 启动服务"
- echo " crash -s stop 停止服务"
- echo " $CRASHDIR/start.sh init 开机初始化"
+ echo " crash -s start $MENU_CLI_START"
+ echo " crash -s stop $MENU_CLI_STOP"
+ echo " $CRASHDIR/start.sh init $MENU_CLI_BOOT_INIT"
echo -----------------------------------------
- echo "在线求助：t.me/ShellClash"
- echo "官方博客：juewuy.github.io"
- echo "发布页面：github.com/juewuy/ShellCrash"
+ echo "$MENU_HELP_ONLINE t.me/ShellClash"
+ echo "$MENU_HELP_BLOG juewuy.github.io"
+ echo "$MENU_HELP_GITHUB github.com/juewuy/ShellCrash"
echo -----------------------------------------
;;
esac
diff --git a/scripts/menus/1_start.sh b/scripts/menus/1_start.sh
index 29b13ca3..c3c39249 100644
--- a/scripts/menus/1_start.sh
+++ b/scripts/menus/1_start.sh
@@ -12,7 +12,7 @@ startover() {
if [ "$redir_mod" = "纯净模式" ]; then
echo "-----------------------------------------------"
echo -e "其他设备可以使用PAC配置连接：\033[4;32mhttp://$host:$db_port/ui/pac\033[0m"
- echo -e "或者使用HTTP/SOCK5方式连接：IP{\033[36m$host\033[0m}端口{\033[36m$mix_port\033[0m}"
+ echo -e "或者使用HTTP/SOCK5方式连接：IP{\033[36m$host\033[0m}Port{\033[36m$mix_port\033[0m}"
fi
return 0
}
diff --git a/scripts/menus/2_settings.sh b/scripts/menus/2_settings.sh
index 3c880c2a..31fbb2ec 100644
--- a/scripts/menus/2_settings.sh
+++ b/scripts/menus/2_settings.sh
@@ -4,690 +4,283 @@
[ -n "$__IS_MODULE_2_SETTINGS_LOADED" ] && return
__IS_MODULE_2_SETTINGS_LOADED=1
-settings() { #功能设置
- #获取设置默认显示
- [ -z "$skip_cert" ] && skip_cert=ON
- [ -z "$sniffer" ] && sniffer=OFF
- [ -z "$dns_mod" ] && dns_mod='redir_host'
- #
- echo "-----------------------------------------------"
- echo -e "\033[30;47m欢迎使用功能设置菜单：\033[0m"
- echo "-----------------------------------------------"
- echo -e " 1 路由模式设置: \033[36m$redir_mod\033[0m"
- echo -e " 2 DNS设置： \033[36m$dns_mod\033[0m"
- echo -e " 3 透明路由\033[32m流量过滤\033[0m"
- [ "$disoverride" != "1" ] && {
- echo -e " 4 跳过证书验证： \033[36m$skip_cert\033[0m"
- echo -e " 5 启用域名嗅探: \033[36m$sniffer\033[0m"
- echo -e " 6 自定义\033[32m端口及秘钥\033[0m"
- }
- echo -e " 8 ipv6设置： \033[36m$ipv6_redir\033[0m"
- echo "-----------------------------------------------"
- echo -e " 9 \033[31m重置/备份/还原\033[0m脚本设置"
- echo -e " 0 返回上级菜单 \033[0m"
- echo "-----------------------------------------------"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0)
- ;;
- 1)
- if [ "$USER" != "root" -a "$USER" != "admin" ]; then
- echo "-----------------------------------------------"
- read -p "非root用户可能无法正确配置其他模式！依然尝试吗？(1/0) > " res
- [ "$res" = 1 ] && set_redir_mod
- else
- set_redir_mod
- fi
- sleep 1
- settings
- ;;
- 2)
- . "$CRASHDIR"/menus/dns.sh && set_dns_mod
- sleep 1
- settings
- ;;
- 3)
- set_fw_filter
- sleep 1
- settings
- ;;
- 4)
+# 功能设置
+settings() {
+ while true; do
+ # 获取设置默认显示
+ [ -z "$skip_cert" ] && skip_cert=ON
+ [ -z "$sniffer" ] && sniffer=OFF
+ [ -z "$dns_mod" ] && dns_mod='redir_host'
+
echo "-----------------------------------------------"
- if [ "$skip_cert" = "OFF" ] >/dev/null 2>&1; then
- echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
- skip_cert=ON
- else
- echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
- skip_cert=OFF
- fi
- setconfig skip_cert $skip_cert
- settings
- ;;
- 5)
+ echo -e "\033[30;47m欢迎使用功能设置菜单：\033[0m"
echo "-----------------------------------------------"
- if [ "$sniffer" = "OFF" ]; then
- if [ "$crashcore" = "clash" ]; then
- rm -rf ${TMPDIR}/CrashCore
- rm -rf "$CRASHDIR"/CrashCore
- rm -rf "$CRASHDIR"/CrashCore.tar.gz
- crashcore=meta
- setconfig crashcore $crashcore
- echo "已将ShellCrash内核切换为Meta内核！域名嗅探依赖Meta或者高版本clashpre内核！"
- fi
- sniffer=ON
- elif [ "$crashcore" = "clashpre" -a "$dns_mod" = "redir_host" ]; then
- echo -e "\033[31m使用clashpre内核且开启redir-host模式时无法关闭！\033[0m"
- else
- sniffer=OFF
- fi
- setconfig sniffer $sniffer
- settings
- ;;
- 6)
- if [ -n "$(pidof CrashCore)" ]; then
- echo "-----------------------------------------------"
- echo -e "\033[33m检测到服务正在运行，需要先停止服务！\033[0m"
- read -p "是否停止服务？(1/0) > " res
- if [ "$res" = "1" ]; then
- "$CRASHDIR"/start.sh stop
- set_adv_config
- fi
- else
- set_adv_config
- fi
- settings
- ;;
- 8)
- set_ipv6
- settings
- ;;
- 9)
- echo "-----------------------------------------------"
- echo -e " 1 备份脚本设置"
- echo -e " 2 还原脚本设置"
- echo -e " 3 重置脚本设置"
- echo -e " 0 返回上级菜单"
+ echo -e " 1 路由模式设置: \033[36m$redir_mod\033[0m"
+ echo -e " 2 DNS设置： \033[36m$dns_mod\033[0m"
+ echo -e " 3 透明路由\033[32m流量过滤\033[0m"
+ [ "$disoverride" != "1" ] && {
+ echo -e " 4 跳过证书验证： \033[36m$skip_cert\033[0m"
+ echo -e " 5 启用域名嗅探: \033[36m$sniffer\033[0m"
+ echo -e " 6 自定义\033[32m端口及秘钥\033[0m"
+ }
+ echo -e " 8 ipv6设置： \033[36m$ipv6_redir\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 9 \033[31m重置/备份/还原\033[0m脚本设置"
+ echo -e " 0 返回上级菜单 \033[0m"
echo "-----------------------------------------------"
read -p "请输入对应数字 > " num
- if [ -z "$num" ]; then
- errornum
- elif [ "$num" = 0 ]; then
- i=
- elif [ "$num" = 1 ]; then
- cp -f "$CFG_PATH" "$CFG_PATH".bak
- echo -e "\033[32m脚本设置已备份！\033[0m"
- elif [ "$num" = 2 ]; then
- if [ -f "$CFG_PATH.bak" ]; then
- mv -f "$CFG_PATH" "$CFG_PATH".bak2
- mv -f "$CFG_PATH".bak "$CFG_PATH"
- mv -f "$CFG_PATH".bak2 "$CFG_PATH".bak
- echo -e "\033[32m脚本设置已还原！(被覆盖的配置已备份！)\033[0m"
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ 1)
+ if [ "$USER" != "root" -a "$USER" != "admin" ]; then
+ echo "-----------------------------------------------"
+ read -p "非root用户可能无法正确配置其他模式！依然尝试吗？(1/0) > " res
+ [ "$res" = 1 ] && set_redir_mod
else
- echo -e "\033[31m找不到备份文件，请先备份脚本设置！\033[0m"
+ set_redir_mod
fi
- elif [ "$num" = 3 ]; then
- mv -f "$CFG_PATH" "$CFG_PATH".bak
- . "$CRASHDIR"/init.sh >/dev/null
- echo -e "\033[32m脚本设置已重置！(旧文件已备份！)\033[0m"
- fi
- echo -e "\033[33m请重新启动脚本！\033[0m"
- exit 0
- ;;
- *)
- errornum
- ;;
- esac
+ sleep 1
+ ;;
+ 2)
+ . "$CRASHDIR"/menus/dns.sh && set_dns_mod
+ sleep 1
+ ;;
+ 3)
+ . "$CRASHDIR"/menus/fw_filter.sh && set_fw_filter
+ sleep 1
+ ;;
+ 4)
+ echo "-----------------------------------------------"
+ if [ "$skip_cert" = "OFF" ] >/dev/null 2>&1; then
+ echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
+ skip_cert=ON
+ else
+ echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
+ skip_cert=OFF
+ fi
+ setconfig skip_cert $skip_cert
+ ;;
+ 5)
+ echo "-----------------------------------------------"
+ if [ "$sniffer" = "OFF" ]; then
+ if [ "$crashcore" = "clash" ]; then
+ rm -rf ${TMPDIR}/CrashCore
+ rm -rf "$CRASHDIR"/CrashCore
+ rm -rf "$CRASHDIR"/CrashCore.tar.gz
+ crashcore=meta
+ setconfig crashcore $crashcore
+ echo "已将ShellCrash内核切换为Meta内核！域名嗅探依赖Meta或者高版本clashpre内核！"
+ fi
+ sniffer=ON
+ elif [ "$crashcore" = "clashpre" -a "$dns_mod" = "redir_host" ]; then
+ echo -e "\033[31m使用clashpre内核且开启redir-host模式时无法关闭！\033[0m"
+ else
+ sniffer=OFF
+ fi
+ setconfig sniffer $sniffer
+ ;;
+ 6)
+ if [ -n "$(pidof CrashCore)" ]; then
+ echo "-----------------------------------------------"
+ echo -e "\033[33m检测到服务正在运行，需要先停止服务！\033[0m"
+ read -p "是否停止服务？(1/0) > " res
+ if [ "$res" = "1" ]; then
+ "$CRASHDIR"/start.sh stop
+ set_adv_config
+ fi
+ else
+ set_adv_config
+ fi
+ ;;
+ 8)
+ set_ipv6
+ ;;
+ 9)
+ echo "-----------------------------------------------"
+ echo -e " 1 备份脚本设置"
+ echo -e " 2 还原脚本设置"
+ echo -e " 3 重置脚本设置"
+ echo -e " 0 返回上级菜单"
+ echo "-----------------------------------------------"
+ read -p "请输入对应数字 > " num
+ if [ -z "$num" ]; then
+ errornum
+ elif [ "$num" = 0 ]; then
+ i=
+ elif [ "$num" = 1 ]; then
+ cp -f "$CFG_PATH" "$CFG_PATH".bak
+ echo -e "\033[32m脚本设置已备份！\033[0m"
+ elif [ "$num" = 2 ]; then
+ if [ -f "$CFG_PATH.bak" ]; then
+ mv -f "$CFG_PATH" "$CFG_PATH".bak2
+ mv -f "$CFG_PATH".bak "$CFG_PATH"
+ mv -f "$CFG_PATH".bak2 "$CFG_PATH".bak
+ echo -e "\033[32m脚本设置已还原！(被覆盖的配置已备份！)\033[0m"
+ else
+ echo -e "\033[31m找不到备份文件，请先备份脚本设置！\033[0m"
+ fi
+ elif [ "$num" = 3 ]; then
+ mv -f "$CFG_PATH" "$CFG_PATH".bak
+ . "$CRASHDIR"/init.sh >/dev/null
+ echo -e "\033[32m脚本设置已重置！(旧文件已备份！)\033[0m"
+ fi
+ echo -e "\033[33m请重新启动脚本！\033[0m"
+ exit 0
+ ;;
+ *)
+ errornum
+ sleep 1
+ break
+ ;;
+ esac
+ done
}
-set_redir_mod() { #路由模式设置
- set_redir_config() {
- setconfig redir_mod $redir_mod
- setconfig dns_mod $dns_mod
- echo "-----------------------------------------------"
- echo -e "\033[36m已设为 $redir_mod ！！\033[0m"
- }
- [ -n "$(ls /dev/net/tun 2>/dev/null)" ] || ip tuntap >/dev/null 2>&1 || modprobe tun 2>/dev/null && sup_tun=1
- [ -z "$firewall_area" ] && firewall_area=1
- [ -z "$redir_mod" ] && [ "$USER" = "root" -o "$USER" = "admin" ] && redir_mod='Redir模式'
- [ -z "$redir_mod" ] && redir_mod='纯净模式'
- firewall_area_dsc=$(echo "仅局域网 仅本机 局域网+本机 纯净模式 主-旁转发($bypass_host)" | cut -d' ' -f$firewall_area)
+set_redir_config() {
+ setconfig redir_mod $redir_mod
+ setconfig dns_mod $dns_mod
echo "-----------------------------------------------"
- echo -e "当前路由模式为：\033[47;30m$redir_mod\033[0m；ShellCrash核心为：\033[47;30m $crashcore \033[0m"
- echo -e "\033[33m切换模式后需要手动重启服务以生效！\033[0m"
- echo "-----------------------------------------------"
- [ $firewall_area -le 3 ] && {
- echo -e " 1 \033[32mRedir模式\033[0m： Redir转发TCP，不转发UDP"
- echo -e " 2 \033[36m混合模式\033[0m： Redir转发TCP，Tun转发UDP"
- echo -e " 3 \033[32mTproxy模式\033[0m： Tproxy转发TCP&UDP"
- echo -e " 4 \033[33mTun模式\033[0m： Tun转发TCP&UDP(占用高不推荐)"
+ echo -e "\033[36m已设为 $redir_mod ！！\033[0m"
+}
+
+# 路由模式设置
+set_redir_mod() {
+ while true; do
+ [ -n "$(ls /dev/net/tun 2>/dev/null)" ] || ip tuntap >/dev/null 2>&1 || modprobe tun 2>/dev/null && sup_tun=1
+ [ -z "$firewall_area" ] && firewall_area=1
+ [ -z "$redir_mod" ] && [ "$USER" = "root" -o "$USER" = "admin" ] && redir_mod='Redir模式'
+ [ -z "$redir_mod" ] && redir_mod='纯净模式'
+ firewall_area_dsc=$(echo "仅局域网 仅本机 局域网+本机 纯净模式 主-旁转发($bypass_host)" | cut -d' ' -f$firewall_area)
echo "-----------------------------------------------"
- }
- [ "$firewall_area" = 5 ] && {
- echo -e " 5 \033[32mTCP旁路转发\033[0m： 仅转发TCP流量至旁路由"
- echo -e " 6 \033[36mT&U旁路转发\033[0m： 转发TCP&UDP流量至旁路由"
+ echo -e "当前路由模式为：\033[47;30m$redir_mod\033[0m；ShellCrash核心为：\033[47;30m $crashcore \033[0m"
+ echo -e "\033[33m切换模式后需要手动重启服务以生效！\033[0m"
echo "-----------------------------------------------"
- }
- echo -e " 7 设置路由劫持范围： \033[47;30m$firewall_area_dsc\033[0m"
- echo -e " 8 容器/虚拟机劫持： \033[47;30m$vm_redir\033[0m"
- echo -e " 9 切换防火墙应用： \033[47;30m$firewall_mod\033[0m"
- echo "-----------------------------------------------"
- echo " 0 返回上级菜单"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0) ;;
- 1)
- redir_mod=Redir模式
- set_redir_config
- set_redir_mod
- ;;
- 2)
- if [ -n "$sup_tun" ]; then
- redir_mod=混合模式
+ [ $firewall_area -le 3 ] && {
+ echo -e " 1 \033[32mRedir模式\033[0m： Redir转发TCP，不转发UDP"
+ echo -e " 2 \033[36m混合模式\033[0m： Redir转发TCP，Tun转发UDP"
+ echo -e " 3 \033[32mTproxy模式\033[0m： Tproxy转发TCP&UDP"
+ echo -e " 4 \033[33mTun模式\033[0m： Tun转发TCP&UDP(占用高不推荐)"
+ echo "-----------------------------------------------"
+ }
+ [ "$firewall_area" = 5 ] && {
+ echo -e " 5 \033[32mTCP旁路转发\033[0m： 仅转发TCP流量至旁路由"
+ echo -e " 6 \033[36mT&U旁路转发\033[0m： 转发TCP&UDP流量至旁路由"
+ echo "-----------------------------------------------"
+ }
+ echo -e " 7 设置路由劫持范围： \033[47;30m$firewall_area_dsc\033[0m"
+ echo -e " 8 容器/虚拟机劫持： \033[47;30m$vm_redir\033[0m"
+ echo -e " 9 切换防火墙应用： \033[47;30m$firewall_mod\033[0m"
+ echo "-----------------------------------------------"
+ echo " 0 返回上级菜单"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ 1)
+ redir_mod=Redir模式
set_redir_config
- else
- echo -e "\033[31m设备未检测到Tun内核模块，请尝试其他模式或者安装相关依赖！\033[0m"
- sleep 1
- fi
- set_redir_mod
- ;;
- 3)
- if [ "$firewall_mod" = "iptables" ]; then
- if [ -f /etc/init.d/qca-nss-ecm -a "$systype" = "mi_snapshot" ]; then
- read -p "xiaomi设备的QOS服务与本模式冲突，是否禁用相关功能？(1/0) > " res
- [ "$res" = '1' ] && {
- /data/shellcrash_init.sh tproxyfix
+ ;;
+ 2)
+ if [ -n "$sup_tun" ]; then
+ redir_mod=混合模式
+ set_redir_config
+ else
+ echo -e "\033[31m设备未检测到Tun内核模块，请尝试其他模式或者安装相关依赖！\033[0m"
+ sleep 1
+ fi
+ ;;
+ 3)
+ if [ "$firewall_mod" = "iptables" ]; then
+ if [ -f /etc/init.d/qca-nss-ecm -a "$systype" = "mi_snapshot" ]; then
+ read -p "xiaomi设备的QOS服务与本模式冲突，是否禁用相关功能？(1/0) > " res
+ [ "$res" = '1' ] && {
+ /data/shellcrash_init.sh tproxyfix
+ redir_mod=Tproxy模式
+ set_redir_config
+ }
+ elif grep -qE '^TPROXY$' /proc/net/ip_tables_targets || modprobe xt_TPROXY >/dev/null 2>&1; then
redir_mod=Tproxy模式
set_redir_config
- }
- elif grep -qE '^TPROXY$' /proc/net/ip_tables_targets || modprobe xt_TPROXY >/dev/null 2>&1; then
- redir_mod=Tproxy模式
+ else
+ echo -e "\033[31m设备未检测到iptables-mod-tproxy模块，请尝试其他模式或者安装相关依赖！\033[0m"
+ sleep 1
+ fi
+ elif [ "$firewall_mod" = "nftables" ]; then
+ if modprobe nft_tproxy >/dev/null 2>&1 || lsmod 2>/dev/null | grep -q nft_tproxy; then
+ redir_mod=Tproxy模式
+ set_redir_config
+ else
+ echo -e "\033[31m设备未检测到nft_tproxy内核模块，请尝试其他模式或者安装相关依赖！\033[0m"
+ sleep 1
+ fi
+ fi
+ ;;
+ 4)
+ if [ -n "$sup_tun" ]; then
+ redir_mod=Tun模式
set_redir_config
else
- echo -e "\033[31m设备未检测到iptables-mod-tproxy模块，请尝试其他模式或者安装相关依赖！\033[0m"
+ echo -e "\033[31m设备未检测到Tun内核模块，请尝试其他模式或者安装相关依赖！\033[0m"
sleep 1
fi
- elif [ "$firewall_mod" = "nftables" ]; then
- if modprobe nft_tproxy >/dev/null 2>&1 || lsmod 2>/dev/null | grep -q nft_tproxy; then
- redir_mod=Tproxy模式
- set_redir_config
- else
- echo -e "\033[31m设备未检测到nft_tproxy内核模块，请尝试其他模式或者安装相关依赖！\033[0m"
- sleep 1
- fi
- fi
- set_redir_mod
- ;;
- 4)
- if [ -n "$sup_tun" ]; then
- redir_mod=Tun模式
+ ;;
+ 5)
+ redir_mod='TCP旁路转发'
set_redir_config
- else
- echo -e "\033[31m设备未检测到Tun内核模块，请尝试其他模式或者安装相关依赖！\033[0m"
+ ;;
+ 6)
+ redir_mod='T&U旁路转发'
+ set_redir_config
+ ;;
+ 7)
+ set_firewall_area
+ ;;
+ 8)
+ set_firewall_vm
+ ;;
+ 9)
+ if [ "$firewall_mod" = 'iptables' ]; then
+ if nft add table inet shellcrash 2>/dev/null; then
+ firewall_mod=nftables
+ redir_mod=Redir模式
+ setconfig redir_mod $redir_mod
+ else
+ echo -e "\033[31m当前设备未安装nftables或者nftables版本过低(<1.0.2),无法切换！\033[0m"
+ fi
+ elif [ "$firewall_mod" = 'nftables' ]; then
+ if ckcmd iptables; then
+ firewall_mod=iptables
+ redir_mod=Redir模式
+ setconfig redir_mod $redir_mod
+ else
+ echo -e "\033[31m当前设备未安装iptables,无法切换！\033[0m"
+ fi
+ else
+ iptables -j REDIRECT -h >/dev/null 2>&1 && firewall_mod=iptables
+ nft add table inet shellcrash 2>/dev/null && firewall_mod=nftables
+ if [ -n "$firewall_mod" ]; then
+ redir_mod=Redir模式
+ setconfig redir_mod $redir_mod
+ setconfig firewall_mod $firewall_mod
+ else
+ echo -e "\033[31m检测不到可用的防火墙应用(iptables/nftables),无法切换！\033[0m"
+ fi
+ fi
sleep 1
- fi
- set_redir_mod
- ;;
- 5)
- redir_mod='TCP旁路转发'
- set_redir_config
- set_redir_mod
- ;;
- 6)
- redir_mod='T&U旁路转发'
- set_redir_config
- set_redir_mod
- ;;
- 7)
- set_firewall_area
- set_redir_mod
- ;;
- 8)
- set_firewall_vm
- set_redir_mod
- ;;
- 9)
- if [ "$firewall_mod" = 'iptables' ]; then
- if nft add table inet shellcrash 2>/dev/null; then
- firewall_mod=nftables
- redir_mod=Redir模式
- setconfig redir_mod $redir_mod
- else
- echo -e "\033[31m当前设备未安装nftables或者nftables版本过低(<1.0.2),无法切换！\033[0m"
- fi
- elif [ "$firewall_mod" = 'nftables' ]; then
- if ckcmd iptables; then
- firewall_mod=iptables
- redir_mod=Redir模式
- setconfig redir_mod $redir_mod
- else
- echo -e "\033[31m当前设备未安装iptables,无法切换！\033[0m"
- fi
- else
- iptables -j REDIRECT -h >/dev/null 2>&1 && firewall_mod=iptables
- nft add table inet shellcrash 2>/dev/null && firewall_mod=nftables
- if [ -n "$firewall_mod" ]; then
- redir_mod=Redir模式
- setconfig redir_mod $redir_mod
- setconfig firewall_mod $firewall_mod
- else
- echo -e "\033[31m检测不到可用的防火墙应用(iptables/nftables),无法切换！\033[0m"
- fi
- fi
- sleep 1
- setconfig firewall_mod $firewall_mod
- set_redir_mod
- ;;
- *)
- errornum
- ;;
- esac
-}
-set_fw_filter(){ #流量过滤
- [ -z "$common_ports" ] && common_ports=ON
- [ -z "$quic_rj" ] && quic_rj=OFF
- [ -z "$cn_ip_route" ] && cn_ip_route=OFF
- touch "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter
- [ -z "$(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null)" ] && mac_return=OFF || mac_return=ON
- echo "-----------------------------------------------"
- echo -e " 1 过滤非常用端口： \033[36m$common_ports\033[0m ————用于过滤P2P流量"
- echo -e " 2 过滤局域网设备： \033[36m$mac_return\033[0m ————使用黑/白名单进行过滤"
- echo -e " 3 过滤QUIC协议: \033[36m$quic_rj\033[0m ————优化视频性能"
- echo -e " 4 过滤CN_IP(6)列表: \033[36m$cn_ip_route\033[0m ————优化性能，不兼容Fake-ip"
- echo -e " 5 自定义透明路由ipv4网段: 适合vlan等复杂网络环境"
- echo -e " 6 自定义保留地址ipv4网段: 需要以保留地址为访问目标的环境"
- echo "-----------------------------------------------"
- echo -e " 0 返回上级菜单 \033[0m"
- echo "-----------------------------------------------"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0)
- ;;
- 1)
- echo "-----------------------------------------------"
- if [ -n "$(pidof CrashCore)" ] && [ "$firewall_mod" = 'iptables' ]; then
- read -p "切换时将停止服务，是否继续？(1/0) > " res
- [ "$res" = 1 ] && "$CRASHDIR"/start.sh stop && set_common_ports
- else
- set_common_ports
- fi
- set_fw_filter
- ;;
- 2)
- checkcfg_mac=$(cat "$CRASHDIR"/configs/mac)
- fw_filter_lan
- if [ -n "$PID" ]; then
- checkcfg_mac_new=$(cat "$CRASHDIR"/configs/mac)
- [ "$checkcfg_mac" != "$checkcfg_mac_new" ] && checkrestart
- fi
- set_fw_filter
- ;;
- 3)
- echo "-----------------------------------------------"
- if [ -n "$(echo "$redir_mod" | grep -oE '混合|Tproxy|Tun')" ]; then
- if [ "$quic_rj" = "OFF" ]; then
- echo -e "\033[33m已禁止QUIC流量通过ShellCrash内核！！\033[0m"
- quic_rj=ON
- else
- echo -e "\033[33m已取消禁止QUIC协议流量！！\033[0m"
- quic_rj=OFF
- fi
- setconfig quic_rj $quic_rj
- else
- echo -e "\033[33m当前模式默认不会代理UDP流量，无需设置！！\033[0m"
- fi
- sleep 1
- set_fw_filter
- ;;
- 4)
- if [ -n "$(ipset -v 2>/dev/null)" ] || [ "$firewall_mod" = 'nftables' ]; then
- if [ "$cn_ip_route" = "OFF" ]; then
- echo -e "\033[32m已开启CN_IP绕过内核功能！！\033[0m"
- echo -e "\033[31m注意！！！此功能会导致全局模式及一切CN相关规则失效！！！\033[0m"
- cn_ip_route=ON
- sleep 2
- else
- echo -e "\033[33m已禁用CN_IP绕过内核功能！！\033[0m"
- cn_ip_route=OFF
- fi
- setconfig cn_ip_route $cn_ip_route
- else
- echo -e "\033[31m当前设备缺少ipset模块或未使用nftables模式，无法启用绕过功能！！\033[0m"
+ setconfig firewall_mod $firewall_mod
+ ;;
+ *)
+ errornum
sleep 1
- fi
- set_fw_filter
- ;;
- 5)
- set_cust_host_ipv4
- set_fw_filter
- ;;
- 6)
- [ -z "$reserve_ipv4" ] && reserve_ipv4="0.0.0.0/8 10.0.0.0/8 127.0.0.0/8 100.64.0.0/10 169.254.0.0/16 172.16.0.0/12 192.168.0.0/16 224.0.0.0/4 240.0.0.0/4"
- echo -e "当前网段：\033[36m$reserve_ipv4\033[0m"
- echo -e "\033[33m地址必须是空格分隔，错误的设置可能导致网络回环或启动报错，请务必谨慎！\033[0m"
- read -p "请输入 > " text
- if [ -n "$(
- echo $text | grep -E "(((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])/(3[0-2]|[1-2]?[0-9]))( +|$)+"
- )" ]; then
- reserve_ipv4="$text"
- echo -e "已将保留地址网段设为：\033[32m$reserve_ipv4\033[0m"
- setconfig reserve_ipv4 "'$reserve_ipv4'"
- else
- echo -e "\033[31m输入有误，操作已取消！\033[0m"
- fi
- sleep 1
- set_fw_filter
- ;;
- *)
- errornum
- ;;
- esac
-}
-set_common_ports() {
- [ -z "$multiport" ] && multiport='22,80,443,8080,8443'
- echo "-----------------------------------------------"
- echo -e "\033[31m注意：\033[0mMIX模式下，所有fake-ip来源的非常用端口流量不会被过滤"
- [ -n "$common_ports" ] &&
- echo -e "当前放行端口：\033[36m$multiport\033[0m"
- echo "-----------------------------------------------"
- echo -e " 1 启用/关闭端口过滤: \033[36m$common_ports\033[0m"
- echo -e " 2 添加放行端口"
- echo -e " 3 移除指定放行端口"
- echo -e " 4 重置默认放行端口"
- echo -e " 5 重置为旧版放行端口"
- echo -e " 0 返回上级菜单"
- echo "-----------------------------------------------"
- read -p "请输入对应数字 > " num
- case $num in
- 1)
- if [ "$common_ports" = ON ];then
- common_ports=OFF
- else
- common_ports=ON
- fi
- setconfig common_ports "$common_ports"
- set_common_ports
- ;;
- 2)
- port_count=$(echo "$multiport" | awk -F',' '{print NF}' )
- if [ "$port_count" -ge 15 ];then
- echo -e "\033[31m最多支持设置放行15个端口，请先减少一些！\033[0m"
- else
- read -p "请输入要放行的端口号 > " port
- if echo ",$multiport," | grep -q ",$port,";then
- echo -e "\033[31m输入错误！请勿重复添加！\033[0m"
- elif [ "$port" -lt 1 ] || [ "$port" -gt 65535 ]; then
- echo -e "\033[31m输入错误！请输入正确的数值(1-65535)！\033[0m"
- else
- multiport=$(echo "$multiport,$port" | sed "s/^,//")
- setconfig multiport "$multiport"
- fi
- fi
- sleep 1
- set_common_ports
- ;;
- 3)
- read -p "请输入要移除的端口号 > " port
- if echo ",$multiport," | grep -q ",$port,";then
- if [ "$port" -lt 1 ] || [ "$port" -gt 65535 ]; then
- echo -e "\033[31m输入错误！请输入正确的数值(1-65535)！\033[0m"
- else
- multiport=$(echo ",$multiport," | sed "s/,$port//; s/^,//; s/,$//")
- setconfig multiport "$multiport"
- fi
- else
- echo -e "\033[31m输入错误！请输入已添加过的端口！\033[0m"
- fi
- sleep 1
- set_common_ports
- ;;
- 4)
- multiport=''
- setconfig multiport
- sleep 1
- set_common_ports
- ;;
- 5)
- multiport='22,80,143,194,443,465,587,853,993,995,5222,8080,8443'
- setconfig multiport "$multiport"
- sleep 1
- set_common_ports
- ;;
- *)
- errornum
- ;;
- esac
-}
-set_cust_host_ipv4() { #自定义ipv4透明路由网段
- [ -z "$replace_default_host_ipv4" ] && replace_default_host_ipv4="OFF"
- echo "-----------------------------------------------"
- echo -e "当前默认透明路由的网段为: \033[32m$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep 'br' | grep -v 'iot' | grep -E ' 1(92|0|72)\.' | sed 's/.*inet.//g' | sed 's/br.*$//g' | sed 's/metric.*$//g' | tr '\n' ' ' && echo) \033[0m"
- echo -e "当前已添加的自定义网段为:\033[36m$cust_host_ipv4\033[0m"
- echo "-----------------------------------------------"
- echo -e " 1 移除所有自定义网段"
- echo -e " 2 使用自定义网段覆盖默认网段 \033[36m$replace_default_host_ipv4\033[0m"
- echo -e " 0 返回上级菜单"
- read -p "请输入对应的序号或需要额外添加的网段 > " text
- case "$text" in
- 2)
- if [ "$replace_default_host_ipv4" == "OFF" ]; then
- replace_default_host_ipv4="ON"
- else
- replace_default_host_ipv4="OFF"
- fi
- setconfig replace_default_host_ipv4 "$replace_default_host_ipv4"
- set_cust_host_ipv4
- ;;
- 1)
- unset cust_host_ipv4
- setconfig cust_host_ipv4
- set_cust_host_ipv4
- ;;
- 0) ;;
- *)
- if [ -n "$(echo $text | grep -Eo '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]{1,2}'$)" -a -z "$(echo $cust_host_ipv4 | grep "$text")" ]; then
- cust_host_ipv4="$cust_host_ipv4 $text"
- setconfig cust_host_ipv4 "'$cust_host_ipv4'"
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m请输入正确的网段地址！\033[0m"
- fi
- sleep 1
- set_cust_host_ipv4
- ;;
- esac
-}
-fw_filter_lan() { #局域网设备过滤
- get_devinfo() {
- dev_ip=$(cat $dhcpdir | grep " $dev " | awk '{print $3}') && [ -z "$dev_ip" ] && dev_ip=$dev
- dev_mac=$(cat $dhcpdir | grep " $dev " | awk '{print $2}') && [ -z "$dev_mac" ] && dev_mac=$dev
- dev_name=$(cat $dhcpdir | grep " $dev " | awk '{print $4}') && [ -z "$dev_name" ] && dev_name='未知设备'
- }
- add_mac() {
- echo "-----------------------------------------------"
- echo 已添加的mac地址：
- cat "$CRASHDIR"/configs/mac 2>/dev/null
- echo "-----------------------------------------------"
- echo -e "\033[33m序号 设备IP 设备mac地址 设备名称\033[32m"
- cat $dhcpdir | awk '{print " "NR" "$3,$2,$4}'
- echo -e "\033[0m-----------------------------------------------"
- echo -e "手动输入mac地址时仅支持\033[32mxx:xx:xx:xx:xx:xx\033[0m的形式"
- echo -e " 0 或回车 结束添加"
- echo "-----------------------------------------------"
- read -p "请输入对应序号或直接输入mac地址 > " num
- if [ -z "$num" -o "$num" = 0 ]; then
- i=
- elif [ -n "$(echo $num | grep -aE '^([0-9A-Fa-f]{2}[:]){5}([0-9A-Fa-f]{2})$')" ]; then
- if [ -z "$(cat "$CRASHDIR"/configs/mac | grep -E "$num")" ]; then
- echo $num | grep -oE '^([0-9A-Fa-f]{2}[:]){5}([0-9A-Fa-f]{2})$' >>"$CRASHDIR"/configs/mac
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
- fi
- add_mac
- elif [ $num -le $(cat $dhcpdir 2>/dev/null | awk 'END{print NR}') ]; then
- macadd=$(cat $dhcpdir | awk '{print $2}' | sed -n "$num"p)
- if [ -z "$(cat "$CRASHDIR"/configs/mac | grep -E "$macadd")" ]; then
- echo $macadd >>"$CRASHDIR"/configs/mac
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
- fi
- add_mac
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m输入有误，请重新输入！\033[0m"
- add_mac
- fi
- }
- add_ip() {
- echo "-----------------------------------------------"
- echo "已添加的IP地址(段)："
- cat "$CRASHDIR"/configs/ip_filter 2>/dev/null
- echo "-----------------------------------------------"
- echo -e "\033[33m序号 设备IP 设备名称\033[32m"
- cat $dhcpdir | awk '{print " "NR" "$3,$4}'
- echo -e "\033[0m-----------------------------------------------"
- echo -e "手动输入时仅支持\033[32m 192.168.1.0/24\033[0m 或 \033[32m192.168.1.0\033[0m 的形式"
- echo -e "不支持ipv6地址过滤，如有需求请使用mac地址过滤"
- echo -e " 0 或回车 结束添加"
- echo "-----------------------------------------------"
- read -p "请输入对应序号或直接输入IP地址段 > " num
- if [ -z "$num" -o "$num" = 0 ]; then
- i=
- elif [ -n "$(echo $num | grep -aE '^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)(/(3[0-2]|[12]?[0-9]))?$')" ]; then
- if [ -z "$(cat "$CRASHDIR"/configs/ip_filter | grep -E "$num")" ]; then
- echo $num | grep -oE '^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)(/(3[0-2]|[12]?[0-9]))?$' >>"$CRASHDIR"/configs/ip_filter
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m已添加的地址，请勿重复添加！\033[0m"
- fi
- add_ip
- elif [ $num -le $(cat $dhcpdir 2>/dev/null | awk 'END{print NR}') ]; then
- ipadd=$(cat $dhcpdir | awk '{print $3}' | sed -n "$num"p)
- if [ -z "$(cat "$CRASHDIR"/configs/mac | grep -E "$ipadd")" ]; then
- echo $ipadd >>"$CRASHDIR"/configs/ip_filter
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m已添加的地址，请勿重复添加！\033[0m"
- fi
- add_ip
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m输入有误，请重新输入！\033[0m"
- add_ip
- fi
- }
- del_all() {
- echo "-----------------------------------------------"
- if [ -z "$(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null)" ]; then
- echo -e "\033[31m列表中没有需要移除的设备！\033[0m"
- sleep 1
- else
- echo -e "请选择需要移除的设备：\033[36m"
- echo -e "\033[33m 设备IP 设备mac地址 设备名称\033[0m"
- i=1
- for dev in $(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null); do
- get_devinfo
- echo -e " $i \033[32m$dev_ip \033[36m$dev_mac \033[32m$dev_name\033[0m"
- i=$((i + 1))
- done
- echo "-----------------------------------------------"
- echo -e "\033[0m 0 或回车 结束删除"
- read -p "请输入需要移除的设备的对应序号 > " num
- mac_filter_rows=$(cat "$CRASHDIR"/configs/mac 2>/dev/null | wc -l)
- ip_filter_rows=$(cat "$CRASHDIR"/configs/ip_filter 2>/dev/null | wc -l)
- if [ -z "$num" ] || [ "$num" -le 0 ]; then
- n=
- elif [ $num -le $mac_filter_rows ]; then
- sed -i "${num}d" "$CRASHDIR"/configs/mac
- echo "-----------------------------------------------"
- echo -e "\033[32m对应设备已移除！\033[0m"
- del_all
- elif [ $num -le $((mac_filter_rows + ip_filter_rows)) ]; then
- num=$((num - mac_filter_rows))
- sed -i "${num}d" "$CRASHDIR"/configs/ip_filter
- echo "-----------------------------------------------"
- echo -e "\033[32m对应设备已移除！\033[0m"
- del_all
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m输入有误，请重新输入！\033[0m"
- del_all
- fi
- fi
- }
- echo "-----------------------------------------------"
- [ -z "$dhcpdir" ] && [ -f /var/lib/dhcp/dhcpd.leases ] && dhcpdir='/var/lib/dhcp/dhcpd.leases'
- [ -z "$dhcpdir" ] && [ -f /var/lib/dhcpd/dhcpd.leases ] && dhcpdir='/var/lib/dhcpd/dhcpd.leases'
- [ -z "$dhcpdir" ] && [ -f /tmp/dhcp.leases ] && dhcpdir='/tmp/dhcp.leases'
- [ -z "$dhcpdir" ] && [ -f /tmp/dnsmasq.leases ] && dhcpdir='/tmp/dnsmasq.leases'
- [ -z "$dhcpdir" ] && dhcpdir='/dev/null'
- [ -z "$macfilter_type" ] && macfilter_type='黑名单'
- if [ "$macfilter_type" = "黑名单" ]; then
- fw_filter_lan_over='白名单'
- fw_filter_lan_scrip='不'
- else
- fw_filter_lan_over='黑名单'
- fw_filter_lan_scrip=''
- fi
- ######
- echo -e "\033[30;47m请在此添加或移除设备\033[0m"
- echo -e "当前过滤方式为：\033[33m$fw_filter_lan_type模式\033[0m"
- echo -e "仅列表内设备流量\033[36m$fw_filter_lan_scrip经过\033[0m内核"
- if [ -n "$(cat "$CRASHDIR"/configs/mac)" ]; then
- echo "-----------------------------------------------"
- echo -e "当前已过滤设备为：\033[36m"
- echo -e "\033[33m 设备mac/ip地址 设备名称\033[0m"
- for dev in $(cat "$CRASHDIR"/configs/mac 2>/dev/null); do
- get_devinfo
- echo -e "\033[36m$dev_mac \033[0m$dev_name"
- done
- for dev in $(cat "$CRASHDIR"/configs/ip_filter 2>/dev/null); do
- get_devinfo
- echo -e "\033[32m$dev_ip \033[0m$dev_name"
- done
- echo "-----------------------------------------------"
- fi
- echo -e " 1 切换为\033[33m$fw_filter_lan_over模式\033[0m"
- echo -e " 2 \033[32m添加指定设备(mac地址)\033[0m"
- echo -e " 3 \033[32m添加指定设备(IP地址/网段)\033[0m"
- echo -e " 4 \033[36m移除指定设备\033[0m"
- echo -e " 9 \033[31m清空整个列表\033[0m"
- echo -e " 0 返回上级菜单"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0) ;;
- 1)
- macfilter_type=$fw_filter_lan_over
- setconfig macfilter_type $macfilter_type
- echo "-----------------------------------------------"
- echo -e "\033[32m已切换为$fw_filter_lan_type模式！\033[0m"
- fw_filter_lan
- ;;
- 2)
- add_mac
- fw_filter_lan
- ;;
- 3)
- add_ip
- fw_filter_lan
- ;;
- 4)
- del_all
- fw_filter_lan
- ;;
- 9)
- : >"$CRASHDIR"/configs/mac
- : >"$CRASHDIR"/configs/ip_filter
- echo "-----------------------------------------------"
- echo -e "\033[31m设备列表已清空！\033[0m"
- fw_filter_lan
- ;;
- *)
- errornum
- ;;
- esac
+ break
+ ;;
+ esac
+ done
}
+
set_adv_config() { #端口设置
. "$CFG_PATH" >/dev/null
[ -z "$secret" ] && secret=未设置
@@ -896,36 +489,42 @@ set_firewall_vm(){
setconfig vm_redir $vm_redir
setconfig vm_ipv4 "'$vm_ipv4'"
}
-set_ipv6() { #ipv6设置
- [ -z "$ipv6_redir" ] && ipv6_redir=OFF
- [ -z "$ipv6_dns" ] && ipv6_dns=ON
- echo "-----------------------------------------------"
- echo -e " 1 ipv6透明路由: \033[36m$ipv6_redir\033[0m ——劫持ipv6流量"
- [ "$disoverride" != "1" ] && echo -e " 2 ipv6-DNS解析: \033[36m$ipv6_dns\033[0m ——决定内置DNS是否返回ipv6地址"
- echo -e " 0 返回上级菜单"
- echo "-----------------------------------------------"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0) ;;
- 1)
- if [ "$ipv6_redir" = "OFF" ]; then
- ipv6_support=ON
- ipv6_redir=ON
- sleep 2
- else
- ipv6_redir=OFF
- fi
- setconfig ipv6_redir $ipv6_redir
- setconfig ipv6_support $ipv6_support
- set_ipv6
- ;;
- 2)
- [ "$ipv6_dns" = "OFF" ] && ipv6_dns=ON || ipv6_dns=OFF
- setconfig ipv6_dns $ipv6_dns
- set_ipv6
- ;;
- *)
- errornum
- ;;
- esac
+
+# ipv6设置
+set_ipv6() {
+ while true; do
+ [ -z "$ipv6_redir" ] && ipv6_redir=OFF
+ [ -z "$ipv6_dns" ] && ipv6_dns=ON
+ echo "-----------------------------------------------"
+ echo -e " 1 ipv6透明路由: \033[36m$ipv6_redir\033[0m ——劫持ipv6流量"
+ [ "$disoverride" != "1" ] && echo -e " 2 ipv6-DNS解析: \033[36m$ipv6_dns\033[0m ——决定内置DNS是否返回ipv6地址"
+ echo -e " 0 返回上级菜单"
+ echo "-----------------------------------------------"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ 1)
+ if [ "$ipv6_redir" = "OFF" ]; then
+ ipv6_support=ON
+ ipv6_redir=ON
+ sleep 2
+ else
+ ipv6_redir=OFF
+ fi
+ setconfig ipv6_redir $ipv6_redir
+ setconfig ipv6_support $ipv6_support
+ ;;
+ 2)
+ [ "$ipv6_dns" = "OFF" ] && ipv6_dns=ON || ipv6_dns=OFF
+ setconfig ipv6_dns $ipv6_dns
+ ;;
+ *)
+ errornum
+ sleep 1
+ break
+ ;;
+ esac
+ done
}
diff --git a/scripts/menus/5_task.sh b/scripts/menus/5_task.sh
index abe5784b..2be5d246 100644
--- a/scripts/menus/5_task.sh
+++ b/scripts/menus/5_task.sh
@@ -69,7 +69,7 @@ task_user_del(){ #自定义命令删除
echo "-----------------------------------------------"
cat "$CRASHDIR"/task/task.user 2>/dev/null | grep -Ev '^#' | awk -F '#' '{print $1" "$3}'
echo "-----------------------------------------------"
- echo 0 返回上级菜单
+ echo "0 返回上级菜单"
echo "-----------------------------------------------"
read -p "请输入对应数字 > " num
if [ -n "$num" ];then
@@ -211,102 +211,114 @@ task_type(){ #任务条件选择菜单
;;
esac
}
-task_manager(){ #任务管理列表
- echo "-----------------------------------------------"
- #抽取并生成临时列表
- croncmd -l > "$TMPDIR"/task_cronlist
- cat "$TMPDIR"/task_cronlist "$CRASHDIR"/task/running 2>/dev/null | sort -u | grep -oE "task/task.sh .*" | awk -F ' ' '{print $2" "$3}' > "$TMPDIR"/task_list
- cat "$CRASHDIR"/task/bfstart "$CRASHDIR"/task/afstart "$CRASHDIR"/task/affirewall 2>/dev/null | awk -F ' ' '{print $2" "$3}' >> "$TMPDIR"/task_list
- cat "$TMPDIR"/task_cronlist 2>/dev/null | sort -u | grep -oE " #.*" | grep -v "守护" | awk -F '#' '{print "0 旧版任务-"$2}' >> "$TMPDIR"/task_list
- sed -i '/^ *$/d' "$TMPDIR"/task_list
- rm -rf "$TMPDIR"/task_cronlist
- #判断为空则返回
- if [ ! -s "$TMPDIR"/task_list ];then
- echo -e "\033[31m当前没有可供管理的任务！\033[36m"
- sleep 1
- else
- echo -e "\033[33m已添加的任务:\033[0m"
- echo "-----------------------------------------------"
- cat "$TMPDIR"/task_list | awk '{print " " NR " " $2}'
- echo "-----------------------------------------------"
- echo -e " a 清空旧版任务"
- echo -e " d 清空任务列表"
- echo -e " 0 返回上级菜单"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0)
- ;;
- a)
- task_del "#"
- echo -e "\033[31m旧版任务已清空！\033[36m"
- sleep 1
- ;;
- d)
- task_del "task.sh"
- echo -e "\033[31m全部任务已清空！\033[36m"
- sleep 1
- ;;
- [1-9]|[1-9][0-9])
- task_txt=$(sed -n "$num p" "$TMPDIR"/task_list)
- task_id=$(echo $task_txt | awk '{print $1}')
- if [ "$task_id" = 0 ];then
- read -p "旧版任务不支持管理，是否移除?(1/0) > " res
- [ "$res" = 1 ] && {
- cronname=$(echo $task_txt | awk -F '-' '{print $2}')
- croncmd -l > $TMPDIR/conf && sed -i "/$cronname/d" $TMPDIR/conf && croncmd $TMPDIR/conf
- sed -i "/$cronname/d" $clashdir/tools/cron 2>/dev/null
- rm -f $TMPDIR/conf
- }
- else
- task_des=$(echo $task_txt | awk '{print $2}')
- task_name=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $3}')
- echo "-----------------------------------------------"
- echo -e "当前任务为：\033[36m $task_des\033[0m"
- echo -e " 1 \033[33m修改\033[0m当前任务"
- echo -e " 2 \033[31m删除\033[0m当前任务"
- echo -e " 3 \033[32m立即执行\033[0m一次"
- echo -e " 4 查看\033[33m执行记录\033[0m"
- echo "-----------------------------------------------"
- echo -e " 0 返回上级菜单"
- read -p "请选择需要执行的操作 > " num
- case "$num" in
- 0)
- ;;
- 1)
- task_type && task_del $task_des
- ;;
- 2)
- task_del $task_des
- ;;
- 3)
- task_command=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $2}')
- eval $task_command && task_res='执行成功！' || task_res='执行失败！'
- echo -e "\033[33m任务【$task_des】$task_res\033[0m"
- sleep 1
- ;;
- 4)
- echo "-----------------------------------------------"
- if [ -n "$(cat "$TMPDIR"/ShellCrash.log | grep "$task_name")" ];then
- cat "$TMPDIR"/ShellCrash.log | grep "$task_name"
- else
- echo -e "\033[31m未找到相关执行记录！\033[0m"
- fi
- sleep 1
- ;;
- *)
- errornum
- ;;
- esac
- fi
- task_manager
- ;;
- *)
- errornum
- ;;
- esac
- fi
+# 任务管理列表
+task_manager() {
+ while true; do
+ echo "-----------------------------------------------"
+ # 抽取并生成临时列表
+ croncmd -l >"$TMPDIR"/task_cronlist
+ cat "$TMPDIR"/task_cronlist "$CRASHDIR"/task/running 2>/dev/null | sort -u | grep -oE "task/task.sh .*" | awk -F ' ' '{print $2" "$3}' >"$TMPDIR"/task_list
+ cat "$CRASHDIR"/task/bfstart "$CRASHDIR"/task/afstart "$CRASHDIR"/task/affirewall 2>/dev/null | awk -F ' ' '{print $2" "$3}' >>"$TMPDIR"/task_list
+ cat "$TMPDIR"/task_cronlist 2>/dev/null | sort -u | grep -oE " #.*" | grep -v "守护" | awk -F '#' '{print "0 旧版任务-"$2}' >>"$TMPDIR"/task_list
+ sed -i '/^ *$/d' "$TMPDIR"/task_list
+ rm -rf "$TMPDIR"/task_cronlist
+ # 判断为空则返回
+ if [ ! -s "$TMPDIR"/task_list ]; then
+ echo -e "\033[31m当前没有可供管理的任务！\033[36m"
+ sleep 1
+ break
+ else
+ echo -e "\033[33m已添加的任务:\033[0m"
+ echo "-----------------------------------------------"
+ cat "$TMPDIR"/task_list | awk '{print " " NR " " $2}'
+ echo "-----------------------------------------------"
+ echo -e " a 清空旧版任务"
+ echo -e " d 清空任务列表"
+ echo -e " 0 返回上级菜单"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ a)
+ task_del "#"
+ echo -e "\033[31m旧版任务已清空！\033[36m"
+ sleep 1
+ break
+ ;;
+ d)
+ task_del "task.sh"
+ echo -e "\033[31m全部任务已清空！\033[36m"
+ sleep 1
+ break
+ ;;
+ [1-9] | [1-9][0-9])
+ task_txt=$(sed -n "$num p" "$TMPDIR"/task_list)
+ task_id=$(echo $task_txt | awk '{print $1}')
+ if [ "$task_id" = 0 ]; then
+ read -p "旧版任务不支持管理，是否移除?(1/0) > " res
+ [ "$res" = 1 ] && {
+ cronname=$(echo $task_txt | awk -F '-' '{print $2}')
+ croncmd -l >$TMPDIR/conf && sed -i "/$cronname/d" $TMPDIR/conf && croncmd $TMPDIR/conf
+ sed -i "/$cronname/d" $clashdir/tools/cron 2>/dev/null
+ rm -f $TMPDIR/conf
+ }
+ break
+ else
+ task_des=$(echo $task_txt | awk '{print $2}')
+ task_name=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $3}')
+ echo "-----------------------------------------------"
+ echo -e "当前任务为：\033[36m $task_des\033[0m"
+ echo -e " 1 \033[33m修改\033[0m当前任务"
+ echo -e " 2 \033[31m删除\033[0m当前任务"
+ echo -e " 3 \033[32m立即执行\033[0m一次"
+ echo -e " 4 查看\033[33m执行记录\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 0 返回上级菜单"
+ read -p "请选择需要执行的操作 > " num
+ case "$num" in
+ "" | 0)
+ return 0
+ ;;
+ 1)
+ task_type && task_del $task_des
+ ;;
+ 2)
+ task_del $task_des
+ ;;
+ 3)
+ task_command=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $2}')
+ eval $task_command && task_res='执行成功！' || task_res='执行失败！'
+ echo -e "\033[33m任务【$task_des】$task_res\033[0m"
+ sleep 1
+ ;;
+ 4)
+ echo "-----------------------------------------------"
+ if [ -n "$(cat "$TMPDIR"/ShellCrash.log | grep "$task_name")" ]; then
+ cat "$TMPDIR"/ShellCrash.log | grep "$task_name"
+ else
+ echo -e "\033[31m未找到相关执行记录！\033[0m"
+ fi
+ sleep 1
+ ;;
+ *)
+ errornum
+ sleep 1
+ ;;
+ esac
+ fi
+ ;;
+ *)
+ errornum
+ sleep 1
+ break
+ ;;
+ esac
+ fi
+ done
}
+
task_recom(){ #任务推荐
echo "-----------------------------------------------"
echo -e "\033[32m启用推荐的自动任务配置？这包括：\033[0m"
@@ -323,65 +335,64 @@ task_recom(){ #任务推荐
echo -e "任务【在每日的3点0分重启服务】\033[32m添加成功！\033[0m"
}
}
-task_menu(){ #任务菜单
- #检测并创建自定义任务文件
- [ -f "$CRASHDIR"/task/task.user ] || echo '#任务ID(必须>200并顺序排列)#任务命令#任务说明(#号隔开，任务命令和说明中都不允许包含#号)' > "$CRASHDIR"/task/task.user
- echo "-----------------------------------------------"
- echo -e "\033[30;47m欢迎使用自动任务功能：\033[0m"
- echo "-----------------------------------------------"
- echo -e " 1 添加\033[32m自动任务\033[0m"
- echo -e " 2 管理\033[33m任务列表\033[0m"
- echo -e " 3 查看\033[36m任务日志\033[0m"
- echo -e " 4 配置\033[36m日志推送\033[0m"
- echo -e " 5 添加\033[33m自定义任务\033[0m"
- echo -e " 6 删除\033[33m自定义任务\033[0m"
- echo -e " 7 使用\033[32m推荐设置\033[0m"
- echo "-----------------------------------------------"
- echo -e " 0 返回上级菜单"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0)
- ;;
- 1)
- task_add
- task_menu
- ;;
- 2)
- task_manager
- rm -rf "$TMPDIR"/task_list
- task_menu
- ;;
- 3)
- if [ -n "$(cat "$TMPDIR"/ShellCrash.log | grep '任务【')" ];then
- echo "-----------------------------------------------"
- cat "$TMPDIR"/ShellCrash.log | grep '任务【'
- else
- echo -e "\033[31m未找到任务相关执行日志！\033[0m"
- fi
- sleep 1
- task_menu
- ;;
- 4)
- echo "-----------------------------------------------"
- echo -e "\033[36m请在日志工具中配置相关推送通道及推送开关\033[0m"
- . "$CRASHDIR"/menus/8_tools.sh && log_pusher
- task_menu
- ;;
- 5)
- task_user_add
- task_menu
- ;;
- 6)
- task_user_del
- task_menu
- ;;
- 7)
- task_recom
- task_menu
- ;;
- *)
- errornum
- ;;
- esac
+# 任务菜单
+task_menu() {
+ while true; do
+ #检测并创建自定义任务文件
+ [ -f "$CRASHDIR"/task/task.user ] || echo '#任务ID(必须>200并顺序排列)#任务命令#任务说明(#号隔开，任务命令和说明中都不允许包含#号)' >"$CRASHDIR"/task/task.user
+ echo "-----------------------------------------------"
+ echo -e "\033[30;47m欢迎使用自动任务功能：\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 1 添加\033[32m自动任务\033[0m"
+ echo -e " 2 管理\033[33m任务列表\033[0m"
+ echo -e " 3 查看\033[36m任务日志\033[0m"
+ echo -e " 4 配置\033[36m日志推送\033[0m"
+ echo -e " 5 添加\033[33m自定义任务\033[0m"
+ echo -e " 6 删除\033[33m自定义任务\033[0m"
+ echo -e " 7 使用\033[32m推荐设置\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 0 返回上级菜单"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ 1)
+ task_add
+ ;;
+ 2)
+ task_manager
+ rm -rf "$TMPDIR"/task_list
+ ;;
+ 3)
+ if [ -n "$(cat "$TMPDIR"/ShellCrash.log | grep '任务【')" ]; then
+ echo "-----------------------------------------------"
+ cat "$TMPDIR"/ShellCrash.log | grep '任务【'
+ else
+ echo -e "\033[31m未找到任务相关执行日志！\033[0m"
+ fi
+ sleep 1
+ ;;
+ 4)
+ echo "-----------------------------------------------"
+ echo -e "\033[36m请在日志工具中配置相关推送通道及推送开关\033[0m"
+ . "$CRASHDIR"/menus/8_tools.sh && log_pusher
+ ;;
+ 5)
+ task_user_add
+ ;;
+ 6)
+ task_user_del
+ ;;
+ 7)
+ task_recom
+ ;;
+ *)
+ errornum
+ sleep 1
+ break
+ ;;
+ esac
+ done
}
diff --git a/scripts/menus/6_core_config.sh b/scripts/menus/6_core_config.sh
index c23317c3..24342561 100644
--- a/scripts/menus/6_core_config.sh
+++ b/scripts/menus/6_core_config.sh
@@ -535,176 +535,176 @@ EOF
rm -rf "$TMPDIR"/providers
fi
}
-setproviders(){ #自定义providers
- . "$CRASHDIR"/libs/set_cron.sh
- . "$CRASHDIR"/libs/web_get_bin.sh
- #获取模版名称
- if [ -z "$(grep "provider_temp_${coretype}" "$CRASHDIR"/configs/ShellCrash.cfg)" ];then
- provider_temp_des=$(sed -n "1 p" "$CRASHDIR"/configs/${coretype}_providers.list | awk '{print $1}')
- else
- provider_temp_file=$(grep "provider_temp_${coretype}" "$CRASHDIR"/configs/ShellCrash.cfg | awk -F '=' '{print $2}')
- provider_temp_des=$(grep "$provider_temp_file" "$CRASHDIR"/configs/${coretype}_providers.list | awk '{print $1}')
- [ -z "$provider_temp_des" ] && provider_temp_des=$provider_temp_file
- fi
- echo "-----------------------------------------------"
- echo -e "\033[33m你可以在这里快捷管理与生成自定义的providers服务商\033[0m"
- echo -e "\033[33m支持在线及本地的Yaml格式配置导入\033[0m"
- [ -s "$CRASHDIR"/configs/providers.cfg ] && {
- echo "-----------------------------------------------"
- echo -e "\033[36m输入对应数字可管理providers服务商\033[0m"
- cat "$CRASHDIR"/configs/providers.cfg | awk -F "#" '{print " "NR" "$1" "$2}'
- }
- echo -e " d \033[31m清空\033[0mproviders服务商列表"
- echo -e " e \033[33m清理\033[0mproviders目录文件"
- echo "-----------------------------------------------"
- echo -e "\033[36m按照a-b-c的顺序即可完成配置生成\033[0m"
- echo -e " a \033[36m添加\033[0mproviders服务商/节点"
- echo -e " b 选择\033[33m规则模版\033[0m \033[32m$provider_temp_des\033[0m"
- echo -e " c \033[32m生成\033[0m基于providers的配置文件"
- echo "-----------------------------------------------"
- echo -e " 0 返回上级菜单"
- read -p "请输入对应字母或数字 > " num
- case "$num" in
- 0)
- ;;
- [1-9]|[1-9][0-9])
- provider_name=$(sed -n "$num p" "$CRASHDIR"/configs/providers.cfg | awk '{print $1}')
- provider_url=$(sed -n "$num p" "$CRASHDIR"/configs/providers.cfg | awk '{print $2}')
- if [ -z "$provider_name" ];then
- errornum
- else
- echo "-----------------------------------------------"
- echo -e " 1 修改名称：\033[36m$provider_name\033[0m"
- echo -e " 2 修改链接地址：\033[32m$provider_url\033[0m"
- echo -e " 3 生成\033[33m仅包含此链接\033[0m的配置文件"
- echo -e " 4 \033[31m移除此链接\033[0m"
- echo "-----------------------------------------------"
- echo -e " 0 返回上级菜单"
- read -p "请选择需要执行的操作 > " num
- case "$num" in
- 0)
- ;;
- 1)
- read -p "请输入名称或者代号(不可重复,不支持纯数字) > " name
- if [ -n "$name" ] && [ -z "$(echo "$name" | grep -E '^[0-9]+$')" ] && ! grep -q "$name" "$CRASHDIR"/configs/providers.cfg;then
- sed -i "s|$provider_name $provider_url|$name $provider_url|" "$CRASHDIR"/configs/providers.cfg
- else
- echo -e "\033[31m输入错误，请重新输入！\033[0m"
- fi
- ;;
- 2)
- read -p "请输入链接地址或本地相对路径 > " link
- if [ -n "$(echo $link | grep -E '.*\..*|^\./')" ] && [ -z "$(grep "$link" "$CRASHDIR"/configs/providers.cfg)" ];then
- link=$(echo $link | sed 's/\&/\\\&/g') #特殊字符添加转义
- sed -i "s|$provider_name $provider_url|$provider_name $link|" "$CRASHDIR"/configs/providers.cfg
- else
- echo -e "\033[31m输入错误，请重新输入！\033[0m"
- fi
- ;;
- 3)
- gen_${coretype}_providers $provider_name $provider_url
- ;;
- 4)
- sed -i "/^$provider_name /d" "$CRASHDIR"/configs/providers.cfg
- ;;
- *)
- errornum
- ;;
- esac
- sleep 1
- fi
- setproviders
- ;;
- a)
- echo "-----------------------------------------------"
- echo -e "支持填写在线的\033[32mYClash订阅地址\033[0m或者\033[32m本地Clash配置文件\033[0m"
- echo -e "本地配置文件请放在\033[32m$CRASHDIR\033[0m目录下，并填写相对路径如【\033[32m./providers/test.yaml\033[0m】"
- echo "-----------------------------------------------"
- read -p "请输入链接地址或本地相对路径 > " link
- link=$(echo $link | sed 's/ //g') #去空格
- [ -n "$(echo $link | grep -E '.*\..*|^\./')" ] && {
- read -p "请输入名称或代号(不可重复,不支持纯数字) > " name
- name=$(echo $name | sed 's/ //g')
- [ -n "$name" ] && [ -z "$(echo "$name" | grep -E '^[0-9]+$')" ] && ! grep -q "$name" "$CRASHDIR"/configs/providers.cfg && {
- echo "-----------------------------------------------"
- echo -e "名称：\033[36m$name\033[0m"
- echo -e "链接地址/路径：\033[32m$link\033[0m"
- read -p "确认添加？(1/0) > " res
- [ "$res" = 1 ] && {
- echo "$name $link" >> "$CRASHDIR"/configs/providers.cfg
- echo -e "\033[32mproviders已添加！\033[0m"
- }
- }
- }
- [ "$?" != 0 ] && echo -e "\033[31m输入错误，操作已取消！\033[0m"
- sleep 1
- setproviders
- ;;
- c)
- echo "-----------------------------------------------"
- if [ -s "$CRASHDIR"/configs/providers.cfg ];then
- echo -e "\033[33msingboxr与mihomo内核的providers配置文件不互通！\033[0m"
- echo "-----------------------------------------------"
- read -p "确认生成${coretype}配置文件？(1/0) > " res
- [ "$res" = "1" ] && {
- gen_${coretype}_providers
- }
- else
- echo -e "\033[31m你还未添加链接或本地配置文件，请先添加！\033[0m"
- sleep 1
- fi
- setproviders
- ;;
- b)
- echo "-----------------------------------------------"
- echo -e "当前规则模版为：\033[32m$provider_temp_des\033[0m"
- echo -e "\033[33m请选择在线模版：\033[0m"
- echo "-----------------------------------------------"
- cat "$CRASHDIR"/configs/${coretype}_providers.list | awk '{print " "NR" "$1}'
- echo "-----------------------------------------------"
- echo -e " a 使用\033[36m本地模版\033[0m"
- echo "-----------------------------------------------"
- read -p "请输入对应字母或数字 > " num
- case "$num" in
- 0)
- ;;
- a)
- read -p "请输入模版的路径(绝对路径) > " dir
- if [ -s $dir ];then
- provider_temp_file=$dir
- setconfig provider_temp_${coretype} $provider_temp_file
- echo -e "\033[32m设置成功！\033[0m"
- else
- echo -e "\033[31m输入错误，找不到对应模版文件！\033[0m"
- fi
- sleep 1
- ;;
- *)
- provider_temp_file=$(sed -n "$num p" "$CRASHDIR"/configs/${coretype}_providers.list 2>/dev/null | awk '{print $2}')
- if [ -z "$provider_temp_file" ];then
- errornum
- else
- setconfig provider_temp_${coretype} $provider_temp_file
- fi
- ;;
- esac
- setproviders
- ;;
- d)
- read -p "确认清空全部链接？(1/0) > " res
- [ "$res" = "1" ] && rm -rf "$CRASHDIR"/configs/providers.cfg
- setproviders
- ;;
- e)
- echo -e "\033[33m将清空 $CRASHDIR/providers 目录下所有内容\033[0m"
- read -p "是否继续？(1/0) > " res
- [ "$res" = "1" ] && rm -rf "$CRASHDIR"/providers
- setproviders
- ;;
- *)
- errornum
- ;;
- esac
+
+# 自定义providers
+setproviders() {
+ . "$CRASHDIR"/libs/set_cron.sh
+ . "$CRASHDIR"/libs/web_get_bin.sh
+ while true; do
+ # 获取模版名称
+ if [ -z "$(grep "provider_temp_${coretype}" "$CRASHDIR"/configs/ShellCrash.cfg)" ]; then
+ provider_temp_des=$(sed -n "1 p" "$CRASHDIR"/configs/${coretype}_providers.list | awk '{print $1}')
+ else
+ provider_temp_file=$(grep "provider_temp_${coretype}" "$CRASHDIR"/configs/ShellCrash.cfg | awk -F '=' '{print $2}')
+ provider_temp_des=$(grep "$provider_temp_file" "$CRASHDIR"/configs/${coretype}_providers.list | awk '{print $1}')
+ [ -z "$provider_temp_des" ] && provider_temp_des=$provider_temp_file
+ fi
+ echo "-----------------------------------------------"
+ echo -e "\033[33m你可以在这里快捷管理与生成自定义的providers服务商\033[0m"
+ echo -e "\033[33m支持在线及本地的Yaml格式配置导入\033[0m"
+ [ -s "$CRASHDIR"/configs/providers.cfg ] && {
+ echo "-----------------------------------------------"
+ echo -e "\033[36m输入对应数字可管理providers服务商\033[0m"
+ cat "$CRASHDIR"/configs/providers.cfg | awk -F "#" '{print " "NR" "$1" "$2}'
+ }
+ echo -e " d \033[31m清空\033[0mproviders服务商列表"
+ echo -e " e \033[33m清理\033[0mproviders目录文件"
+ echo "-----------------------------------------------"
+ echo -e "\033[36m按照a-b-c的顺序即可完成配置生成\033[0m"
+ echo -e " a \033[36m添加\033[0mproviders服务商/节点"
+ echo -e " b 选择\033[33m规则模版\033[0m \033[32m$provider_temp_des\033[0m"
+ echo -e " c \033[32m生成\033[0m基于providers的配置文件"
+ echo "-----------------------------------------------"
+ echo -e " 0 返回上级菜单"
+ read -p "请输入对应字母或数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ [1-9] | [1-9][0-9])
+ provider_name=$(sed -n "$num p" "$CRASHDIR"/configs/providers.cfg | awk '{print $1}')
+ provider_url=$(sed -n "$num p" "$CRASHDIR"/configs/providers.cfg | awk '{print $2}')
+ if [ -z "$provider_name" ]; then
+ errornum
+ else
+ echo "-----------------------------------------------"
+ echo -e " 1 修改名称：\033[36m$provider_name\033[0m"
+ echo -e " 2 修改链接地址：\033[32m$provider_url\033[0m"
+ echo -e " 3 生成\033[33m仅包含此链接\033[0m的配置文件"
+ echo -e " 4 \033[31m移除此链接\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 0 返回上级菜单"
+ read -p "请选择需要执行的操作 > " num
+ case "$num" in
+ "" | 0) ;;
+ 1)
+ read -p "请输入名称或者代号(不可重复,不支持纯数字) > " name
+ if [ -n "$name" ] && [ -z "$(echo "$name" | grep -E '^[0-9]+$')" ] && ! grep -q "$name" "$CRASHDIR"/configs/providers.cfg; then
+ sed -i "s|$provider_name $provider_url|$name $provider_url|" "$CRASHDIR"/configs/providers.cfg
+ else
+ echo -e "\033[31m输入错误，请重新输入！\033[0m"
+ fi
+ ;;
+ 2)
+ read -p "请输入链接地址或本地相对路径 > " link
+ if [ -n "$(echo $link | grep -E '.*\..*|^\./')" ] && [ -z "$(grep "$link" "$CRASHDIR"/configs/providers.cfg)" ]; then
+ link=$(echo $link | sed 's/\&/\\\&/g') #特殊字符添加转义
+ sed -i "s|$provider_name $provider_url|$provider_name $link|" "$CRASHDIR"/configs/providers.cfg
+ else
+ echo -e "\033[31m输入错误，请重新输入！\033[0m"
+ fi
+ ;;
+ 3)
+ gen_${coretype}_providers $provider_name $provider_url
+ ;;
+ 4)
+ sed -i "/^$provider_name /d" "$CRASHDIR"/configs/providers.cfg
+ ;;
+ *)
+ errornum
+ ;;
+ esac
+ fi
+ sleep 1
+ ;;
+ a)
+ echo "-----------------------------------------------"
+ echo -e "支持填写在线的\033[32mYClash订阅地址\033[0m或者\033[32m本地Clash配置文件\033[0m"
+ echo -e "本地配置文件请放在\033[32m$CRASHDIR\033[0m目录下，并填写相对路径如【\033[32m./providers/test.yaml\033[0m】"
+ echo "-----------------------------------------------"
+ read -p "请输入链接地址或本地相对路径 > " link
+ link=$(echo $link | sed 's/ //g') #去空格
+ [ -n "$(echo $link | grep -E '.*\..*|^\./')" ] && {
+ read -p "请输入名称或代号(不可重复,不支持纯数字) > " name
+ name=$(echo $name | sed 's/ //g')
+ [ -n "$name" ] && [ -z "$(echo "$name" | grep -E '^[0-9]+$')" ] && ! grep -q "$name" "$CRASHDIR"/configs/providers.cfg && {
+ echo "-----------------------------------------------"
+ echo -e "名称：\033[36m$name\033[0m"
+ echo -e "链接地址/路径：\033[32m$link\033[0m"
+ read -p "确认添加？(1/0) > " res
+ [ "$res" = 1 ] && {
+ echo "$name $link" >>"$CRASHDIR"/configs/providers.cfg
+ echo -e "\033[32mproviders已添加！\033[0m"
+ }
+ }
+ }
+ [ "$?" != 0 ] && echo -e "\033[31m输入错误，操作已取消！\033[0m"
+ sleep 1
+ ;;
+ c)
+ echo "-----------------------------------------------"
+ if [ -s "$CRASHDIR"/configs/providers.cfg ]; then
+ echo -e "\033[33msingboxr与mihomo内核的providers配置文件不互通！\033[0m"
+ echo "-----------------------------------------------"
+ read -p "确认生成${coretype}配置文件？(1/0) > " res
+ [ "$res" = "1" ] && {
+ gen_${coretype}_providers
+ }
+ else
+ echo -e "\033[31m你还未添加链接或本地配置文件，请先添加！\033[0m"
+ sleep 1
+ fi
+ ;;
+ b)
+ echo "-----------------------------------------------"
+ echo -e "当前规则模版为：\033[32m$provider_temp_des\033[0m"
+ echo -e "\033[33m请选择在线模版：\033[0m"
+ echo "-----------------------------------------------"
+ cat "$CRASHDIR"/configs/${coretype}_providers.list | awk '{print " "NR" "$1}'
+ echo "-----------------------------------------------"
+ echo -e " a 使用\033[36m本地模版\033[0m"
+ echo "-----------------------------------------------"
+ read -p "请输入对应字母或数字 > " num
+ case "$num" in
+ "" | 0) ;;
+ a)
+ read -p "请输入模版的路径(绝对路径) > " dir
+ if [ -s $dir ]; then
+ provider_temp_file=$dir
+ setconfig provider_temp_${coretype} $provider_temp_file
+ echo -e "\033[32m设置成功！\033[0m"
+ else
+ echo -e "\033[31m输入错误，找不到对应模版文件！\033[0m"
+ fi
+ sleep 1
+ ;;
+ *)
+ provider_temp_file=$(sed -n "$num p" "$CRASHDIR"/configs/${coretype}_providers.list 2>/dev/null | awk '{print $2}')
+ if [ -z "$provider_temp_file" ]; then
+ errornum
+ sleep 1
+ else
+ setconfig provider_temp_${coretype} $provider_temp_file
+ fi
+ ;;
+ esac
+ ;;
+ d)
+ read -p "确认清空全部链接？(1/0) > " res
+ [ "$res" = "1" ] && rm -rf "$CRASHDIR"/configs/providers.cfg
+ ;;
+ e)
+ echo -e "\033[33m将清空 $CRASHDIR/providers 目录下所有内容\033[0m"
+ read -p "是否继续？(1/0) > " res
+ [ "$res" = "1" ] && rm -rf "$CRASHDIR"/providers
+ ;;
+ *)
+ errornum
+ sleep 1
+ break
+ ;;
+ esac
+ done
}
set_clash_adv(){ #自定义clash高级规则
@@ -746,77 +746,78 @@ set_singbox_adv(){ #自定义singbox配置文件
echo "-----------------------------------------------"
echo -e "使用前请务必参考配置教程:\033[32;4m https://juewuy.github.io/nWTjEpkSK \033[0m"
}
-override(){ #配置文件覆写
- [ -z "$rule_link" ] && rule_link=1
- [ -z "$server_link" ] && server_link=1
- echo "-----------------------------------------------"
- echo -e "\033[30;47m 欢迎使用配置文件覆写功能！\033[0m"
- echo "-----------------------------------------------"
- echo -e " 1 自定义\033[32m端口及秘钥\033[0m"
- echo -e " 2 管理\033[36m自定义规则\033[0m"
- echo "$crashcore" | grep -q 'singbox' || {
- echo -e " 3 管理\033[33m自定义节点\033[0m"
- echo -e " 4 管理\033[36m自定义策略组\033[0m"
- }
- echo -e " 5 \033[32m自定义\033[0m高级功能"
- [ "$disoverride" != 1 ] && echo -e " 9 \033[33m禁用\033[0m配置文件覆写"
- echo "-----------------------------------------------"
- [ "$inuserguide" = 1 ] || echo -e " 0 返回上级菜单"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0)
- ;;
- 1)
- if [ -n "$(pidof CrashCore)" ];then
- echo "-----------------------------------------------"
- echo -e "\033[33m检测到服务正在运行，需要先停止服务！\033[0m"
- read -p "是否停止服务？(1/0) > " res
- if [ "$res" = "1" ];then
- "$CRASHDIR"/start.sh stop
- setport
- fi
- else
- setport
- fi
- override
- ;;
- 2)
- setrules
- override
- ;;
- 3)
- setproxies
- override
- ;;
- 4)
- setgroups
- override
- ;;
- 5)
- echo "$crashcore" | grep -q 'singbox' && set_singbox_adv || set_clash_adv
- sleep 3
- override
- ;;
- 9)
- echo "-----------------------------------------------"
- echo -e "\033[33m此功能可能会导致严重问题！启用后脚本中大部分功能都将禁用！！！\033[0m"
- echo -e "如果你不是非常了解$crashcore的运行机制，切勿开启！\033[0m"
- echo -e "\033[33m继续后如出现任何问题，请务必自行解决，一切提问恕不受理！\033[0m"
- echo "-----------------------------------------------"
- sleep 2
- read -p "我确认遇到问题可以自行解决[1/0] > " res
- [ "$res" = '1' ] && {
- disoverride=1
- setconfig disoverride $disoverride
- echo "-----------------------------------------------"
- echo -e "\033[32m设置成功！\033[0m"
- }
- override
- ;;
- *)
- errornum
- ;;
- esac
+
+# 配置文件覆写
+override() {
+ while true; do
+ [ -z "$rule_link" ] && rule_link=1
+ [ -z "$server_link" ] && server_link=1
+ echo "-----------------------------------------------"
+ echo -e "\033[30;47m 欢迎使用配置文件覆写功能！\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 1 自定义\033[32m端口及秘钥\033[0m"
+ echo -e " 2 管理\033[36m自定义规则\033[0m"
+ echo "$crashcore" | grep -q 'singbox' || {
+ echo -e " 3 管理\033[33m自定义节点\033[0m"
+ echo -e " 4 管理\033[36m自定义策略组\033[0m"
+ }
+ echo -e " 5 \033[32m自定义\033[0m高级功能"
+ [ "$disoverride" != 1 ] && echo -e " 9 \033[33m禁用\033[0m配置文件覆写"
+ echo "-----------------------------------------------"
+ [ "$inuserguide" = 1 ] || echo -e " 0 返回上级菜单"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ 1)
+ if [ -n "$(pidof CrashCore)" ]; then
+ echo "-----------------------------------------------"
+ echo -e "\033[33m检测到服务正在运行，需要先停止服务！\033[0m"
+ read -p "是否停止服务？(1/0) > " res
+ if [ "$res" = "1" ]; then
+ "$CRASHDIR"/start.sh stop
+ setport
+ fi
+ else
+ setport
+ fi
+ ;;
+ 2)
+ setrules
+ ;;
+ 3)
+ setproxies
+ ;;
+ 4)
+ setgroups
+ ;;
+ 5)
+ echo "$crashcore" | grep -q 'singbox' && set_singbox_adv || set_clash_adv
+ sleep 3
+ ;;
+ 9)
+ echo "-----------------------------------------------"
+ echo -e "\033[33m此功能可能会导致严重问题！启用后脚本中大部分功能都将禁用！！！\033[0m"
+ echo -e "如果你不是非常了解$crashcore的运行机制，切勿开启！\033[0m"
+ echo -e "\033[33m继续后如出现任何问题，请务必自行解决，一切提问恕不受理！\033[0m"
+ echo "-----------------------------------------------"
+ sleep 2
+ read -p "我确认遇到问题可以自行解决[1/0] > " res
+ [ "$res" = '1' ] && {
+ disoverride=1
+ setconfig disoverride $disoverride
+ echo "-----------------------------------------------"
+ echo -e "\033[32m设置成功！\033[0m"
+ }
+ ;;
+ *)
+ errornum
+ sleep 1
+ break
+ ;;
+ esac
+ done
}
gen_link_config(){ #选择在线规则
@@ -987,205 +988,206 @@ gen_core_config_link(){ #在线生成工具
fi
done
}
-set_core_config_link(){ #直接导入配置
- echo "-----------------------------------------------"
- echo -e "\033[32m仅限导入完整的配置文件链接！！！\033[0m"
- echo "-----------------------------------------------"
- echo -e "注意：\033[31m此功能不兼容“跳过证书验证”功能，部分老旧\n设备可能出现x509报错导致节点不通\033[0m"
- echo -e "你也可以搭配在线订阅转换网站或者自建SubStore使用"
- echo "$crashcore" | grep -q 'singbox' &&echo -e "singbox内核建议使用\033[32;4mhttps://subv.jwsc.eu.org/\033[0m转换"
- echo "-----------------------------------------------"
- echo -e "\033[33m0 返回上级菜单\033[0m"
- echo "-----------------------------------------------"
- read -p "请输入完整链接 > " link
- test=$(echo $link | grep -iE "tp.*://" )
- link=`echo ${link/\ \(*\)/''}` #删除恶心的超链接内容
- link=`echo ${link//\&/\\\&}` #处理分隔符
- if [ -n "$link" -a -n "$test" ];then
- echo "-----------------------------------------------"
- echo -e 请检查输入的链接是否正确：
- echo -e "\033[4;32m$link\033[0m"
- read -p "确认导入配置文件？原配置文件将被备份![1/0] > " res
- if [ "$res" = '1' ]; then
- #将用户链接写入配置
- Url=''
- Https="$link"
- setconfig Https "'$Https'"
- setconfig Url
- #获取在线yaml文件
- jump_core_config
- else
- set_core_config_link
- fi
- elif [ "$link" = 0 ];then
- i=
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m请输入正确的配置文件链接地址！！！\033[0m"
- echo -e "\033[33m仅支持http、https、ftp以及ftps链接！\033[0m"
- sleep 1
- set_core_config_link
- fi
+
+# 直接导入配置
+set_core_config_link() {
+ while true; do
+ echo "-----------------------------------------------"
+ echo -e "\033[32m仅限导入完整的配置文件链接！！！\033[0m"
+ echo "-----------------------------------------------"
+ echo -e "注意：\033[31m此功能不兼容“跳过证书验证”功能，部分老旧\n设备可能出现x509报错导致节点不通\033[0m"
+ echo -e "你也可以搭配在线订阅转换网站或者自建SubStore使用"
+ echo "$crashcore" | grep -q 'singbox' && echo -e "singbox内核建议使用\033[32;4mhttps://subv.jwsc.eu.org/\033[0m转换"
+ echo "-----------------------------------------------"
+ echo -e "\033[33m0 返回上级菜单\033[0m"
+ echo "-----------------------------------------------"
+ read -p "请输入完整链接 > " link
+ test=$(echo $link | grep -iE "tp.*://")
+ link=$(echo ${link/\ \(*\)/''}) # 删除恶心的超链接内容
+ link=$(echo ${link//\&/\\&}) # 处理分隔符
+ if [ -n "$link" -a -n "$test" ]; then
+ echo "-----------------------------------------------"
+ echo -e "请检查输入的链接是否正确："
+ echo -e "\033[4;32m$link\033[0m"
+ read -p "确认导入配置文件？原配置文件将被备份![1/0] > " res
+ if [ "$res" = '1' ]; then
+ # 将用户链接写入配置
+ Url=''
+ Https="$link"
+ setconfig Https "'$Https'"
+ setconfig Url
+ # 获取在线yaml文件
+ jump_core_config
+ break
+ fi
+ elif [ "$link" = 0 ]; then
+ i=
+ break
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m请输入正确的配置文件链接地址！！！\033[0m"
+ echo -e "\033[33m仅支持http、https、ftp以及ftps链接！\033[0m"
+ sleep 1
+ fi
+ done
}
-#配置文件主界面
-set_core_config(){
- [ -z "$rule_link" ] && rule_link=1
- [ -z "$server_link" ] && server_link=1
- echo "$crashcore" | grep -q 'singbox' && config_path="$JSONSDIR"/config.json || config_path="$YAMLSDIR"/config.yaml
- echo "-----------------------------------------------"
- echo -e "\033[30;47m ShellCrash配置文件管理\033[0m"
- echo "-----------------------------------------------"
- echo -e " 1 在线\033[32m生成配置文件\033[0m(基于Subconverter订阅转换)"
- if [ -f "$CRASHDIR"/v2b_api.sh ];then
- echo -e " 2 登录\033[33m获取订阅(推荐！)\033[0m"
- else
- echo -e " 2 在线\033[33m获取配置文件\033[0m(基于订阅提供者)"
- fi
- echo -e " 3 本地\033[32m生成配置文件\033[0m(基于内核providers,推荐！)"
- echo -e " 4 本地\033[33m上传完整配置文件\033[0m"
- echo -e " 5 设置\033[36m自动更新\033[0m"
- echo -e " 6 \033[32m自定义\033[0m配置文件"
- echo -e " 7 \033[33m更新\033[0m配置文件"
- echo -e " 8 \033[36m还原\033[0m配置文件"
- echo -e " 9 自定义浏览器UA \033[32m$user_agent\033[0m"
- echo "-----------------------------------------------"
- [ "$inuserguide" = 1 ] || echo -e " 0 返回上级菜单"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0)
- ;;
- 1)
- if [ -n "$Url" ];then
- echo "-----------------------------------------------"
- echo -e "\033[33m检测到已记录的链接内容：\033[0m"
- echo -e "\033[4;32m$Url\033[0m"
- echo "-----------------------------------------------"
- read -p "清空链接/追加导入？[1/0] > " res
- if [ "$res" = '1' ]; then
- Url_link=""
- echo "-----------------------------------------------"
- echo -e "\033[31m链接已清空！\033[0m"
- else
- Url_link=$Url
- fi
- fi
- gen_core_config_link
- set_core_config
- ;;
- 2)
- if [ -f "$CRASHDIR"/v2b_api.sh ];then
- . "$CRASHDIR"/v2b_api.sh
- set_core_config
- else
- set_core_config_link
- fi
- set_core_config
- ;;
- 3)
- if [ "$crashcore" = meta -o "$crashcore" = clashpre ];then
- coretype=clash
- setproviders
- elif [ "$crashcore" = singboxr ];then
- coretype=singbox
- setproviders
- else
- echo -e "\033[33msingbox官方内核及Clash基础内核不支持此功能，请先更换内核！\033[0m"
- sleep 1
- checkupdate && setcore
- fi
- set_core_config
- ;;
- 4)
- echo "-----------------------------------------------"
- echo -e "\033[33m请将本地配置文件上传到/tmp目录并重命名为config.yaml或者config.json\033[0m"
- echo -e "\033[32m之后重新运行本脚本即可自动弹出导入提示！\033[0m"
- exit
- ;;
- 5)
- . "$CRASHDIR"/menus/5_task.sh && task_menu
- set_core_config
- ;;
- 6)
- checkcfg=$(cat $CFG_PATH)
- override
- if [ -n "$PID" ];then
- checkcfg_new=$(cat $CFG_PATH)
- [ "$checkcfg" != "$checkcfg_new" ] && checkrestart
- fi
- set_core_config
- ;;
- 7)
- if [ -z "$Url" -a -z "$Https" ];then
- echo "-----------------------------------------------"
- echo -e "\033[31m没有找到你的配置文件/订阅链接！请先输入链接！\033[0m"
- sleep 1
- set_core_config
- else
- echo "-----------------------------------------------"
- echo -e "\033[33m当前系统记录的链接为：\033[0m"
- echo -e "\033[4;32m$Url$Https\033[0m"
- echo "-----------------------------------------------"
- read -p "确认更新配置文件？[1/0] > " res
- if [ "$res" = '1' ]; then
- jump_core_config
- else
- set_core_config
- fi
- fi
- ;;
- 8)
- if [ ! -f ${config_path}.bak ];then
- echo "-----------------------------------------------"
- echo -e "\033[31m没有找到配置文件的备份！\033[0m"
- set_core_config
- else
- echo "-----------------------------------------------"
- echo -e 备份文件共有"\033[32m`wc -l < ${config_path}.bak`\033[0m"行内容，当前文件共有"\033[32m`wc -l < ${config_path}`\033[0m"行内容
- read -p "确认还原配置文件？此操作不可逆！[1/0] > " res
- if [ "$res" = '1' ]; then
- mv ${config_path}.bak ${config_path}
- echo "----------------------------------------------"
- echo -e "\033[32m配置文件已还原！请手动重启服务！\033[0m"
- sleep 1
- else
- echo "-----------------------------------------------"
- echo -e "\033[31m操作已取消！返回上级菜单！\033[0m"
- set_core_config
- fi
- fi
- ;;
- 9)
- echo "-----------------------------------------------"
- echo -e "\033[36m如果6-1或者6-2无法正确获取配置文件时可以尝试使用\033[0m"
- echo -e " 1 使用自动UA"
- echo -e " 2 不使用UA"
- echo -e " 3 使用自定义UA：\033[32m$user_agent\033[0m"
- echo "-----------------------------------------------"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0)
- user_agent=''
- ;;
- 1)
- user_agent='auto'
- ;;
- 2)
- user_agent='none'
- ;;
- 3)
- read -p "请输入自定义UA(不要包含空格和特殊符号！) > " text
- [ -n "$text" ] && user_agent="$text"
- ;;
- *)
- errornum
- ;;
- esac
- [ "$num" -le 3 ] && setconfig user_agent "$user_agent"
- set_core_config
- ;;
- *)
- errornum
- ;;
- esac
+# 配置文件主界面
+set_core_config() {
+ while true; do
+ [ -z "$rule_link" ] && rule_link=1
+ [ -z "$server_link" ] && server_link=1
+ echo "$crashcore" | grep -q 'singbox' && config_path="$JSONSDIR"/config.json || config_path="$YAMLSDIR"/config.yaml
+ echo "-----------------------------------------------"
+ echo -e "\033[30;47m ShellCrash配置文件管理\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 1 在线\033[32m生成配置文件\033[0m(基于Subconverter订阅转换)"
+ if [ -f "$CRASHDIR"/v2b_api.sh ]; then
+ echo -e " 2 登录\033[33m获取订阅(推荐！)\033[0m"
+ else
+ echo -e " 2 在线\033[33m获取配置文件\033[0m(基于订阅提供者)"
+ fi
+ echo -e " 3 本地\033[32m生成配置文件\033[0m(基于内核providers,推荐！)"
+ echo -e " 4 本地\033[33m上传完整配置文件\033[0m"
+ echo -e " 5 设置\033[36m自动更新\033[0m"
+ echo -e " 6 \033[32m自定义\033[0m配置文件"
+ echo -e " 7 \033[33m更新\033[0m配置文件"
+ echo -e " 8 \033[36m还原\033[0m配置文件"
+ echo -e " 9 自定义浏览器UA \033[32m$user_agent\033[0m"
+ echo "-----------------------------------------------"
+ [ "$inuserguide" = 1 ] || echo -e " 0 返回上级菜单"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ 1)
+ if [ -n "$Url" ]; then
+ echo "-----------------------------------------------"
+ echo -e "\033[33m检测到已记录的链接内容：\033[0m"
+ echo -e "\033[4;32m$Url\033[0m"
+ echo "-----------------------------------------------"
+ read -p "清空链接/追加导入？[1/0] > " res
+ if [ "$res" = '1' ]; then
+ Url_link=""
+ echo "-----------------------------------------------"
+ echo -e "\033[31m链接已清空！\033[0m"
+ else
+ Url_link=$Url
+ fi
+ fi
+ gen_core_config_link
+ ;;
+ 2)
+ if [ -f "$CRASHDIR"/v2b_api.sh ]; then
+ . "$CRASHDIR"/v2b_api.sh
+ else
+ set_core_config_link
+ fi
+ ;;
+ 3)
+ if [ "$crashcore" = meta -o "$crashcore" = clashpre ]; then
+ coretype=clash
+ setproviders
+ elif [ "$crashcore" = singboxr ]; then
+ coretype=singbox
+ setproviders
+ else
+ echo -e "\033[33msingbox官方内核及Clash基础内核不支持此功能，请先更换内核！\033[0m"
+ sleep 1
+ checkupdate && setcore
+ fi
+ ;;
+ 4)
+ echo "-----------------------------------------------"
+ echo -e "\033[33m请将本地配置文件上传到/tmp目录并重命名为config.yaml或者config.json\033[0m"
+ echo -e "\033[32m之后重新运行本脚本即可自动弹出导入提示！\033[0m"
+ sleep 2
+ exit
+ ;;
+ 5)
+ . "$CRASHDIR"/menus/5_task.sh && task_menu
+ break
+ ;;
+ 6)
+ checkcfg=$(cat $CFG_PATH)
+ override
+ if [ -n "$PID" ]; then
+ checkcfg_new=$(cat $CFG_PATH)
+ [ "$checkcfg" != "$checkcfg_new" ] && checkrestart
+ fi
+ ;;
+ 7)
+ if [ -z "$Url" -a -z "$Https" ]; then
+ echo "-----------------------------------------------"
+ echo -e "\033[31m没有找到你的配置文件/订阅链接！请先输入链接！\033[0m"
+ sleep 1
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[33m当前系统记录的链接为：\033[0m"
+ echo -e "\033[4;32m$Url$Https\033[0m"
+ echo "-----------------------------------------------"
+ read -p "确认更新配置文件？[1/0] > " res
+ if [ "$res" = '1' ]; then
+ jump_core_config
+ break
+ fi
+ fi
+ ;;
+ 8)
+ if [ ! -f ${config_path}.bak ]; then
+ echo "-----------------------------------------------"
+ echo -e "\033[31m没有找到配置文件的备份！\033[0m"
+ else
+ echo "-----------------------------------------------"
+ echo -e 备份文件共有"\033[32m$(wc -l <${config_path}.bak)\033[0m"行内容，当前文件共有"\033[32m$(wc -l <${config_path})\033[0m"行内容
+ read -p "确认还原配置文件？此操作不可逆！[1/0] > " res
+ if [ "$res" = '1' ]; then
+ mv ${config_path}.bak ${config_path}
+ echo "----------------------------------------------"
+ echo -e "\033[32m配置文件已还原！请手动重启服务！\033[0m"
+ sleep 1
+ break
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m操作已取消！返回上级菜单！\033[0m"
+ sleep 1
+ fi
+ fi
+ ;;
+ 9)
+ echo "-----------------------------------------------"
+ echo -e "\033[36m如果6-1或者6-2无法正确获取配置文件时可以尝试使用\033[0m"
+ echo -e " 1 使用自动UA"
+ echo -e " 2 不使用UA"
+ echo -e " 3 使用自定义UA：\033[32m$user_agent\033[0m"
+ echo "-----------------------------------------------"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ 0)
+ user_agent=''
+ ;;
+ 1)
+ user_agent='auto'
+ ;;
+ 2)
+ user_agent='none'
+ ;;
+ 3)
+ read -p "请输入自定义UA(不要包含空格和特殊符号！) > " text
+ [ -n "$text" ] && user_agent="$text"
+ ;;
+ *)
+ errornum
+ ;;
+ esac
+ [ "$num" -le 3 ] && setconfig user_agent "$user_agent"
+ ;;
+ *)
+ errornum
+ sleep 1
+ break
+ ;;
+ esac
+ done
}
diff --git a/scripts/menus/7_gateway.sh b/scripts/menus/7_gateway.sh
index de3d7c5c..05e140a7 100644
--- a/scripts/menus/7_gateway.sh
+++ b/scripts/menus/7_gateway.sh
@@ -8,72 +8,74 @@ __IS_MODULE_7_GATEWAY_LOADED=1
. "$CRASHDIR"/menus/check_port.sh
. "$CRASHDIR"/libs/gen_base64.sh
-#访问与控制主菜单
-gateway(){
- echo "-----------------------------------------------"
- echo -e "\033[30;47m欢迎使用访问与控制菜单：\033[0m"
- echo "-----------------------------------------------"
- echo -e " 1 配置\033[33m公网访问防火墙 \033[32m$fw_wan\033[0m"
- echo -e " 2 配置\033[36mTelegram专属控制机器人 \033[32m$bot_tg_service\033[0m"
- echo -e " 3 配置\033[36mDDNS自动域名\033[0m"
- [ "$disoverride" != "1" ] && {
- echo -e " 4 自定义\033[33m公网Vmess入站\033[0m节点 \033[32m$vms_service\033[0m"
- echo -e " 5 自定义\033[33m公网ShadowSocks入站\033[0m节点 \033[32m$sss_service\033[0m"
- echo -e " 6 配置\033[36mTailscale内网穿透\033[0m(限Singbox) \033[32m$ts_service\033[0m"
- echo -e " 7 配置\033[36mWireguard客户端\033[0m(限Singbox) \033[32m$wg_service\033[0m"
- }
- echo -e " 0 返回上级菜单"
- echo "-----------------------------------------------"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0) ;;
- 1)
+# 访问与控制主菜单
+gateway() {
+ while true; do
echo "-----------------------------------------------"
- if [ -n "$(pidof CrashCore)" ] && [ "$firewall_mod" = 'iptables' ]; then
- read -p "需要先停止服务，是否继续？(1/0) > " res
- [ "$res" = 1 ] && "$CRASHDIR"/start.sh stop && set_fw_wan
- else
- set_fw_wan
- fi
- gateway
- ;;
- 2)
- set_bot_tg
- gateway
- ;;
- 3)
- . "$CRASHDIR"/menus/ddns.sh && ddns_menu
- gateway
- ;;
- 4)
- set_vmess
- gateway
- ;;
- 5)
- set_shadowsocks
- gateway
- ;;
- 6)
- if echo "$crashcore" | grep -q 'sing';then
- set_tailscale
- else
- echo -e "\033[33m$crashcore内核暂不支持此功能，请先更换内核！\033[0m"
- sleep 1
- fi
- gateway
- ;;
- 7)
- if echo "$crashcore" | grep -q 'sing';then
- set_wireguard
- else
- echo -e "\033[33m$crashcore内核暂不支持此功能，请先更换内核！\033[0m"
- sleep 1
- fi
- gateway
- ;;
- *) errornum ;;
- esac
+ echo -e "\033[30;47m欢迎使用访问与控制菜单：\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 1 配置\033[33m公网访问防火墙 \033[32m$fw_wan\033[0m"
+ echo -e " 2 配置\033[36mTelegram专属控制机器人 \033[32m$bot_tg_service\033[0m"
+ echo -e " 3 配置\033[36mDDNS自动域名\033[0m"
+ [ "$disoverride" != "1" ] && {
+ echo -e " 4 自定义\033[33m公网Vmess入站\033[0m节点 \033[32m$vms_service\033[0m"
+ echo -e " 5 自定义\033[33m公网ShadowSocks入站\033[0m节点 \033[32m$sss_service\033[0m"
+ echo -e " 6 配置\033[36mTailscale内网穿透\033[0m(限Singbox) \033[32m$ts_service\033[0m"
+ echo -e " 7 配置\033[36mWireguard客户端\033[0m(限Singbox) \033[32m$wg_service\033[0m"
+ }
+ echo -e " 0 返回上级菜单"
+ echo "-----------------------------------------------"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ 1)
+ echo "-----------------------------------------------"
+ if [ -n "$(pidof CrashCore)" ] && [ "$firewall_mod" = 'iptables' ]; then
+ read -p "需要先停止服务，是否继续？(1/0) > " res
+ [ "$res" = 1 ] && "$CRASHDIR"/start.sh stop && set_fw_wan
+ else
+ set_fw_wan
+ fi
+ ;;
+ 2)
+ set_bot_tg
+ ;;
+ 3)
+ . "$CRASHDIR"/menus/ddns.sh && ddns_menu
+ ;;
+ 4)
+ set_vmess
+ ;;
+ 5)
+ set_shadowsocks
+ ;;
+ 6)
+ if echo "$crashcore" | grep -q 'sing'; then
+ set_tailscale
+ else
+ echo -e "\033[33m$crashcore内核暂不支持此功能，请先更换内核！\033[0m"
+ sleep 1
+ fi
+ ;;
+ 7)
+ if echo "$crashcore" | grep -q 'sing'; then
+ set_wireguard
+ else
+ echo -e "\033[33m$crashcore内核暂不支持此功能，请先更换内核！\033[0m"
+ sleep 1
+ fi
+ ;;
+ *)
+ errornum
+ sleep 1
+ break
+ ;;
+ esac
+ done
}
+
#公网防火墙
set_fw_wan() {
[ -z "$fw_wan" ] && fw_wan=ON
@@ -228,104 +230,103 @@ set_bot_tg(){
;;
esac
}
-#自定义入站
-set_vmess(){
- echo "-----------------------------------------------"
- echo -e "\033[31m注意：\033[0m设置的端口会添加到公网访问防火墙并自动放行！\n 脚本只提供基础功能，更多需求请用自定义配置文件功能！"
- echo -e " \033[31m切勿用于搭建违法翻墙节点，违者后果自负！\033[0m"
- echo "-----------------------------------------------"
- echo -e " 1 \033[32m启用/关闭\033[0mVmess入站 \033[32m$vms_service\033[0m"
- echo "-----------------------------------------------"
- echo -e " 2 设置\033[36m监听端口\033[0m： \033[36m$vms_port\033[0m"
- echo -e " 3 设置\033[33mWS-path(可选)\033[0m： \033[33m$vms_ws_path\033[0m"
- echo -e " 4 设置\033[36m秘钥-uuid\033[0m： \033[36m$vms_uuid\033[0m"
- echo -e " 5 一键生成\033[32m随机秘钥\033[0m"
- echo -e " 6 设置\033[36m混淆host(可选)\033[0m： \033[33m$vms_host\033[0m"
- gen_base64 1 >/dev/null 2>&1 &&
- echo -e " 7 一键生成\033[32m分享链接\033[0m"
- echo -e " 0 返回上级菜单 \033[0m"
- echo "-----------------------------------------------"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0) ;;
- 1)
- if [ "$vms_service" = ON ];then
- vms_service=OFF
- setconfig vms_service "$vms_service"
- else
- if [ -n "$vms_port" ] && [ -n "$vms_uuid" ];then
- vms_service=ON
- setconfig vms_service "$vms_service"
- else
- echo -e "\033[31m请先完成必选设置！\033[0m"
- sleep 1
- fi
- fi
- set_vmess
- ;;
- 2)
- read -p "请输入端口号(输入0删除) > " text
- if [ "$text" = 0 ];then
- vms_port=''
- setconfig vms_port "" "$GT_CFG_PATH"
- elif check_port "$text"; then
- vms_port="$text"
- setconfig vms_port "$text" "$GT_CFG_PATH"
- else
- sleep 1
- fi
- set_vmess
- ;;
- 3)
- read -p "请输入ws-path路径(输入0删除) > " text
- if [ "$text" = 0 ];then
- vms_ws_path=''
- setconfig vms_ws_path "" "$GT_CFG_PATH"
- elif echo "$text" |grep -qE '^/';then
- vms_ws_path="$text"
- setconfig vms_ws_path "$text" "$GT_CFG_PATH"
- else
- echo -e "\033[31m不是合法的path路径，必须以【/】开头！\033[0m"
- sleep 1
- fi
- set_vmess
- ;;
- 4)
- read -p "请输入UUID(输入0删除) > " text
- if [ "$text" = 0 ];then
- vms_uuid=''
- setconfig vms_uuid "" "$GT_CFG_PATH"
- elif echo "$text" |grep -qiE '^[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$';then
- vms_uuid="$text"
- setconfig vms_uuid "$text" "$GT_CFG_PATH"
- else
- echo -e "\033[31m不是合法的UUID格式，请重新输入或使用随机生成功能！\033[0m"
- sleep 1
- fi
- set_vmess
- ;;
- 5)
- vms_uuid=$(cat /proc/sys/kernel/random/uuid)
- setconfig vms_uuid "$vms_uuid" "$GT_CFG_PATH"
- sleep 1
- set_vmess
- ;;
- 6)
- read -p "请输入免流混淆host(输入0删除) > " text
- if [ "$text" = 0 ];then
- vms_host=''
- setconfig vms_host "" "$GT_CFG_PATH"
- else
- vms_host="$text"
- setconfig vms_host "$text" "$GT_CFG_PATH"
- fi
- set_vmess
- ;;
- 7)
- read -p "请输入本机公网IP(4/6)或域名 > " host_wan
- if [ -n "$host_wan" ] && [ -n "$vms_port" ] && [ -n "$vms_uuid" ];then
- [ -n "$vms_ws_path" ] && vms_net=ws
- vms_json=$(cat </dev/null 2>&1 &&
+ echo -e " 7 一键生成\033[32m分享链接\033[0m"
+ echo -e " 0 返回上级菜单 \033[0m"
+ echo "-----------------------------------------------"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ 1)
+ if [ "$vms_service" = ON ]; then
+ vms_service=OFF
+ setconfig vms_service "$vms_service"
+ else
+ if [ -n "$vms_port" ] && [ -n "$vms_uuid" ]; then
+ vms_service=ON
+ setconfig vms_service "$vms_service"
+ else
+ echo -e "\033[31m请先完成必选设置！\033[0m"
+ sleep 1
+ fi
+ fi
+ ;;
+ 2)
+ read -p "请输入端口号(输入0删除) > " text
+ if [ "$text" = 0 ]; then
+ vms_port=''
+ setconfig vms_port "" "$GT_CFG_PATH"
+ elif check_port "$text"; then
+ vms_port="$text"
+ setconfig vms_port "$text" "$GT_CFG_PATH"
+ else
+ sleep 1
+ fi
+ ;;
+ 3)
+ read -p "请输入ws-path路径(输入0删除) > " text
+ if [ "$text" = 0 ]; then
+ vms_ws_path=''
+ setconfig vms_ws_path "" "$GT_CFG_PATH"
+ elif echo "$text" | grep -qE '^/'; then
+ vms_ws_path="$text"
+ setconfig vms_ws_path "$text" "$GT_CFG_PATH"
+ else
+ echo -e "\033[31m不是合法的path路径，必须以【/】开头！\033[0m"
+ sleep 1
+ fi
+ ;;
+ 4)
+ read -p "请输入UUID(输入0删除) > " text
+ if [ "$text" = 0 ]; then
+ vms_uuid=''
+ setconfig vms_uuid "" "$GT_CFG_PATH"
+ elif echo "$text" | grep -qiE '^[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$'; then
+ vms_uuid="$text"
+ setconfig vms_uuid "$text" "$GT_CFG_PATH"
+ else
+ echo -e "\033[31m不是合法的UUID格式，请重新输入或使用随机生成功能！\033[0m"
+ sleep 1
+ fi
+ ;;
+ 5)
+ vms_uuid=$(cat /proc/sys/kernel/random/uuid)
+ setconfig vms_uuid "$vms_uuid" "$GT_CFG_PATH"
+ sleep 1
+ ;;
+ 6)
+ read -p "请输入免流混淆host(输入0删除) > " text
+ if [ "$text" = 0 ]; then
+ vms_host=''
+ setconfig vms_host "" "$GT_CFG_PATH"
+ else
+ vms_host="$text"
+ setconfig vms_host "$text" "$GT_CFG_PATH"
+ fi
+ ;;
+ 7)
+ read -p "请输入本机公网IP(4/6)或域名 > " host_wan
+ if [ -n "$host_wan" ] && [ -n "$vms_port" ] && [ -n "$vms_uuid" ]; then
+ [ -n "$vms_ws_path" ] && vms_net=ws
+ vms_json=$(
+ cat < " num
- case "$num" in
- 1)
- #设置运行模式
- redir_mod="混合模式"
- [ -n "$(echo $cputype | grep -E "linux.*mips.*")" ] && {
- if grep -qE '^TPROXY$' /proc/net/ip_tables_targets || modprobe xt_TPROXY >/dev/null 2>&1; then
- redir_mod="Tproxy模式"
- else
- redir_mod="Redir模式"
- fi
- }
- [ -z "$crashcore" ] && crashcore=meta
- setconfig crashcore "$crashcore"
- setconfig redir_mod "$redir_mod"
- setconfig dns_mod mix
- setconfig firewall_area '1'
- #默认启用绕过CN-IP
- setconfig cn_ip_route ON
- #自动识别IPV6
- [ -n "$(ip a 2>&1 | grep -w 'inet6' | grep -E 'global' | sed 's/.*inet6.//g' | sed 's/scope.*$//g')" ] && {
- setconfig ipv6_redir ON
- setconfig ipv6_support ON
- setconfig ipv6_dns ON
- setconfig cn_ipv6_route ON
- }
- #设置开机启动
- [ -f /etc/rc.common -a "$(cat /proc/1/comm)" = "procd" ] && /etc/init.d/shellcrash enable
- ckcmd systemctl && [ "$(cat /proc/1/comm)" = "systemd" ] && systemctl enable shellcrash.service > /dev/null 2>&1
- rm -rf "$CRASHDIR"/.dis_startup
- autostart=enable
- #检测IP转发
- if [ "$(cat /proc/sys/net/ipv4/ip_forward)" = "0" ];then
- echo "-----------------------------------------------"
- echo -e "\033[33m检测到你的设备尚未开启ip转发，局域网设备将无法正常连接网络，是否立即开启？\033[0m"
- read -p "是否开启？(1/0) > " res
- [ "$res" = 1 ] && {
- echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf
- sysctl -w net.ipv4.ip_forward=1
- } && echo "已成功开启ipv4转发，如未正常开启，请手动重启设备！" || echo "开启失败！请自行谷歌查找当前设备的开启方法！"
- fi
- #禁止docker启用的net.bridge.bridge-nf-call-iptables
- sysctl -w net.bridge.bridge-nf-call-iptables=0 > /dev/null 2>&1
- sysctl -w net.bridge.bridge-nf-call-ip6tables=0 > /dev/null 2>&1
- ;;
- 2)
- setconfig redir_mod "Redir模式"
- [ -n "$(echo $cputype | grep -E "linux.*mips.*")" ] && setconfig crashcore "clash"
- setconfig common_ports "OFF"
- setconfig firewall_area '2'
- ;;
- 3)
- mv -f $CFG_PATH.bak $CFG_PATH
- echo -e "\033[32m脚本设置已还原！\033[0m"
- echo -e "\033[33m请重新启动脚本！\033[0m"
- exit 0
- ;;
- *)
- errornum
- forwhat
- ;;
- esac
- }
- forwhat
- #检测小内存模式
- dir_size=$(dir_avail "$CRASHDIR")
- if [ "$dir_size" -lt 10240 ];then
- echo "-----------------------------------------------"
- echo -e "\033[33m检测到你的安装目录空间不足10M，是否开启小闪存模式？\033[0m"
- echo -e "\033[0m开启后核心及数据库文件将被下载到内存中，这将占用一部分内存空间\033[0m"
- echo -e "\033[0m每次开机后首次运行服务时都会自动的重新下载相关文件\033[0m"
- echo "-----------------------------------------------"
- read -p "是否开启？(1/0) > " res
- [ "$res" = 1 ] && {
- BINDIR=/tmp/ShellCrash
- setconfig BINDIR /tmp/ShellCrash "$CRASHDIR"/configs/command.env
- }
- fi
- #启用推荐的自动任务配置
- . "$CRASHDIR"/menus/5_task.sh && task_recom
- #小米设备软固化
- if [ "$systype" = "mi_snapshot" ];then
- echo "-----------------------------------------------"
- echo -e "\033[33m检测到为小米路由设备，启用软固化可防止路由升级后丢失SSH\033[0m"
- read -p "是否启用软固化功能？(1/0) > " res
- [ "$res" = 1 ] && mi_autoSSH
- fi
- #提示导入订阅或者配置文件
- [ ! -s "$CRASHDIR"/yamls/config.yaml -a ! -s "$CRASHDIR"/jsons/config.json ] && {
- echo "-----------------------------------------------"
- echo -e "\033[32m是否导入配置文件？\033[0m(这是运行前的最后一步)"
- echo -e "\033[0m你必须拥有一份配置文件才能运行服务！\033[0m"
- echo "-----------------------------------------------"
- read -p "现在开始导入？(1/0) > " res
- [ "$res" = 1 ] && inuserguide=1 && {
- . "$CRASHDIR"/menus/6_core_config.sh && set_core_config
- inuserguide=""
- }
- }
- #回到主界面
- echo "-----------------------------------------------"
- echo -e "\033[36m很好！现在只需要执行启动就可以愉快的使用了！\033[0m"
- echo "-----------------------------------------------"
- read -p "立即启动服务？(1/0) > " res
- [ "$res" = 1 ] && start_core && sleep 2
- main_menu
-}
diff --git a/scripts/menus/9_upgrade.sh b/scripts/menus/9_upgrade.sh
index b648d7b5..f0856914 100644
--- a/scripts/menus/9_upgrade.sh
+++ b/scripts/menus/9_upgrade.sh
@@ -317,140 +317,158 @@ switch_core(){ #clash与singbox内核切换
}
}
}
-getcore(){ #下载内核文件
- . "$CRASHDIR"/libs/core_tools.sh #调用下载工具
- [ -z "$crashcore" ] && crashcore=meta
- [ -z "$cpucore" ] && check_cpucore
- [ "$crashcore" = unknow ] && setcoretype
- echo "$crashcore" | grep -q 'singbox' && core_new=singbox || core_new=clash
- #获取在线内核文件
- echo "-----------------------------------------------"
- echo "正在在线获取$crashcore核心文件……"
- core_webget
- case "$?" in
- 0)
- echo -e "\033[32m$crashcore核心下载成功！\033[0m"
- sleep 1
- switch_core
- ;;
- 1)
- echo -e "\033[31m核心文件下载失败！\033[0m"
- [ -z "$custcorelink" ] && error_down
- ;;
- *)
- echo -e "\033[31m核心文件下载成功但校验失败！请尝试手动指定CPU版本\033[0m"
- rm -rf ${TMPDIR}/core_new
- rm -rf ${TMPDIR}/core_new.tar.gz
- setcpucore
- ;;
- esac
+
+# 下载内核文件
+getcore() {
+ # 调用下载工具
+ . "$CRASHDIR"/libs/core_tools.sh
+
+ [ -z "$crashcore" ] && crashcore=meta
+ [ -z "$cpucore" ] && check_cpucore
+ [ "$crashcore" = unknow ] && setcoretype
+ echo "$crashcore" | grep -q 'singbox' && core_new=singbox || core_new=clash
+ # 获取在线内核文件
+ echo "-----------------------------------------------"
+ echo "正在在线获取$crashcore核心文件......"
+ core_webget
+ case "$?" in
+ 0)
+ echo -e "\033[32m$crashcore核心下载成功！\033[0m"
+ sleep 1
+ switch_core
+ ;;
+ 1)
+ echo -e "\033[31m核心文件下载失败！\033[0m"
+ [ -z "$custcorelink" ] && error_down
+ ;;
+ *)
+ echo -e "\033[31m核心文件下载成功但校验失败！请尝试手动指定CPU版本\033[0m"
+ rm -rf ${TMPDIR}/core_new
+ rm -rf ${TMPDIR}/core_new.tar.gz
+ setcpucore
+ ;;
+ esac
}
-setcustcore(){ #自定义内核
- checkcustcore(){
- [ "$api_tag" = "latest" ] && api_url=latest || api_url="tags/$api_tag"
- #通过githubapi获取内核信息
- echo -e "\033[32m正在获取内核文件链接！\033[0m"
- webget "$TMPDIR"/github_api https://api.github.com/repos/${project}/releases/${api_url}
- if [ "$?" = 0 ];then
- release_tag=$(cat "$TMPDIR"/github_api | grep '"tag_name":' | awk -F '"' '{print $4}')
- release_date=$(cat "$TMPDIR"/github_api | grep '"published_at":' | awk -F '"' '{print $4}')
- update_date=$(cat "$TMPDIR"/github_api | grep '"updated_at":' | head -n 1 | awk -F '"' '{print $4}')
- [ -n "$(echo $cpucore | grep mips)" ] && cpu_type=mips || cpu_type=$cpucore
- cat "$TMPDIR"/github_api | grep "browser_download_url" | grep -oE "https://github.com/${project}/releases/download.*linux.*${cpu_type}.*\.gz\"$" | sed 's/"//' > "$TMPDIR"/core.list
- rm -rf "$TMPDIR"/github_api
- #
- if [ -s "$TMPDIR"/core.list ];then
- echo "-----------------------------------------------"
- echo -e "内核版本：\033[36m$release_tag\033[0m"
- echo -e "发布时间：\033[33m$release_date\033[0m"
- echo -e "更新时间：\033[32m$update_date\033[0m"
- echo "-----------------------------------------------"
- echo -e "\033[33m请确认内核信息并选择：\033[0m"
- cat "$TMPDIR"/core.list | grep -oE "$release_tag.*" | sed 's|.*/||' | awk '{print " "NR" "$1}'
- echo -e " 0 返回上级菜单"
- echo "-----------------------------------------------"
- read -p "请输入对应数字 > " num
- case "$num" in
- 0)
- setcustcore
- ;;
- [1-9]|[1-9][0-9])
- if [ "$num" -le "$(wc -l < "$TMPDIR"/core.list)" ];then
- custcorelink=$(sed -n "$num"p "$TMPDIR"/core.list)
- getcore
- else
- errornum
- fi
- ;;
- *)
- errornum
- ;;
- esac
- else
- echo -e "\033[31m找不到可用内核，可能是作者没有编译相关CPU架构版本的内核文件！\033[0m"
- sleep 1
- fi
- else
- echo -e "\033[31m查找失败，请尽量在服务启动后再使用本功能！\033[0m"
- sleep 1
- fi
- rm -rf "$TMPDIR"/core.list
- }
- [ -z "$cpucore" ] && check_cpucore
- echo "-----------------------------------------------"
- echo -e "\033[36m此处内核通常源自互联网采集，此处致谢各位开发者！\033[0m"
- echo -e "\033[33m自定义内核未经过完整适配，使用出现问题请自行解决！\033[0m"
- echo -e "\033[31m自定义内核已适配定时任务，但不支持小闪存模式！\033[0m"
- echo -e "\033[32m如遇到网络错误请先启动ShellCrash服务！\033[0m"
- [ -n "$custcore" ] && {
- echo "-----------------------------------------------"
- echo -e "当前内核为：\033[36m$custcore\033[0m"
- }
- echo "-----------------------------------------------"
- echo -e "\033[33m请选择需要使用的核心！\033[0m"
- echo -e "1 \033[36mMetaCubeX/mihomo\033[32m@release\033[0m版本官方内核"
- echo -e "2 \033[36mvernesong/mihomo\033[32m@alpha\033[0m版本内核(支持Smart策略)"
- echo -e "3 \033[36mSagerNet/sing-box\033[32m@release\033[0m版本官方内核"
- echo -e "4 Premium-2023.08.17内核(已停止维护)"
- echo -e "9 \033[33m自定义内核链接 \033[0m"
- echo "-----------------------------------------------"
- echo -e " 0 返回上级菜单"
- read -p "请输入对应数字 > " num
- case "$num" in
- 1)
- project=MetaCubeX/mihomo
- api_tag=latest
- crashcore=meta
- checkcustcore
- ;;
- 2)
- project=vernesong/mihomo
- api_tag=Prerelease-Alpha
- crashcore=meta
- checkcustcore
- ;;
- 3)
- project=SagerNet/sing-box
- api_tag=latest
- crashcore=singbox
- checkcustcore
- ;;
- 4)
- project=juewuy/ShellCrash
- api_tag=clash.premium.latest
- crashcore=clashpre
- checkcustcore
- ;;
- 9)
- read -p "请输入自定义内核的链接地址(必须是以.tar.gz或.gz结尾的压缩文件) > " link
- [ -n "$link" ] && custcorelink="$link"
- setcoretype
- getcore
- ;;
- *)
- ;;
- esac
+
+checkcustcore() {
+ [ "$api_tag" = "latest" ] && api_url=latest || api_url="tags/$api_tag"
+ # 通过githubapi获取内核信息
+ echo -e "\033[32m正在获取内核文件链接！\033[0m"
+ webget "$TMPDIR"/github_api https://api.github.com/repos/${project}/releases/${api_url}
+ if [ "$?" = 0 ]; then
+ release_tag=$(cat "$TMPDIR"/github_api | grep '"tag_name":' | awk -F '"' '{print $4}')
+ release_date=$(cat "$TMPDIR"/github_api | grep '"published_at":' | awk -F '"' '{print $4}')
+ update_date=$(cat "$TMPDIR"/github_api | grep '"updated_at":' | head -n 1 | awk -F '"' '{print $4}')
+ [ -n "$(echo $cpucore | grep mips)" ] && cpu_type=mips || cpu_type=$cpucore
+ cat "$TMPDIR"/github_api | grep "browser_download_url" | grep -oE "https://github.com/${project}/releases/download.*linux.*${cpu_type}.*\.gz\"$" | sed 's/"//' >"$TMPDIR"/core.list
+ rm -rf "$TMPDIR"/github_api
+
+ if [ -s "$TMPDIR"/core.list ]; then
+ echo "-----------------------------------------------"
+ echo -e "内核版本：\033[36m$release_tag\033[0m"
+ echo -e "发布时间：\033[33m$release_date\033[0m"
+ echo -e "更新时间：\033[32m$update_date\033[0m"
+ echo "-----------------------------------------------"
+ echo -e "\033[33m请确认内核信息并选择：\033[0m"
+ cat "$TMPDIR"/core.list | grep -oE "$release_tag.*" | sed 's|.*/||' | awk '{print " "NR" "$1}'
+ echo -e " 0 返回上级菜单"
+ echo "-----------------------------------------------"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ 0)
+ return 0
+ ;;
+ [1-9] | [1-9][0-9])
+ if [ "$num" -le "$(wc -l <"$TMPDIR"/core.list)" ]; then
+ custcorelink=$(sed -n "$num"p "$TMPDIR"/core.list)
+ getcore
+ else
+ errornum
+ sleep 1
+ fi
+ ;;
+ *)
+ errornum
+ sleep 1
+ ;;
+ esac
+ else
+ echo -e "\033[31m找不到可用内核，可能是作者没有编译相关CPU架构版本的内核文件！\033[0m"
+ sleep 1
+ fi
+ else
+ echo -e "\033[31m查找失败，请尽量在服务启动后再使用本功能！\033[0m"
+ sleep 1
+ fi
+ rm -rf "$TMPDIR"/core.list
}
+
+# 自定义内核
+setcustcore() {
+ while true; do
+ [ -z "$cpucore" ] && check_cpucore
+ echo "-----------------------------------------------"
+ echo -e "\033[36m此处内核通常源自互联网采集，此处致谢各位开发者！\033[0m"
+ echo -e "\033[33m自定义内核未经过完整适配，使用出现问题请自行解决！\033[0m"
+ echo -e "\033[31m自定义内核已适配定时任务，但不支持小闪存模式！\033[0m"
+ echo -e "\033[32m如遇到网络错误请先启动ShellCrash服务！\033[0m"
+ [ -n "$custcore" ] && {
+ echo "-----------------------------------------------"
+ echo -e "当前内核为：\033[36m$custcore\033[0m"
+ }
+ echo "-----------------------------------------------"
+ echo -e "\033[33m请选择需要使用的核心！\033[0m"
+ echo -e "1 \033[36mMetaCubeX/mihomo\033[32m@release\033[0m版本官方内核"
+ echo -e "2 \033[36mvernesong/mihomo\033[32m@alpha\033[0m版本内核(支持Smart策略)"
+ echo -e "3 \033[36mSagerNet/sing-box\033[32m@release\033[0m版本官方内核"
+ echo -e "4 Premium-2023.08.17内核(已停止维护)"
+ echo -e "9 \033[33m自定义内核链接 \033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 0 返回上级菜单"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ "" | 0)
+ break
+ ;;
+ 1)
+ project=MetaCubeX/mihomo
+ api_tag=latest
+ crashcore=meta
+ checkcustcore
+ ;;
+ 2)
+ project=vernesong/mihomo
+ api_tag=Prerelease-Alpha
+ crashcore=meta
+ checkcustcore
+ ;;
+ 3)
+ project=SagerNet/sing-box
+ api_tag=latest
+ crashcore=singbox
+ checkcustcore
+ ;;
+ 4)
+ project=juewuy/ShellCrash
+ api_tag=clash.premium.latest
+ crashcore=clashpre
+ checkcustcore
+ ;;
+ 9)
+ read -p "请输入自定义内核的链接地址(必须是以.tar.gz或.gz结尾的压缩文件) > " link
+ [ -n "$link" ] && custcorelink="$link"
+ setcoretype
+ getcore
+ ;;
+ *)
+ errornum
+ sleep 1
+ break
+ ;;
+ esac
+ done
+}
+
setziptype(){
echo "-----------------------------------------------"
echo -e "请选择内核内核分支及压缩方式：\033[0m"
diff --git a/scripts/menus/dns.sh b/scripts/menus/dns.sh
index ac955054..1562079e 100644
--- a/scripts/menus/dns.sh
+++ b/scripts/menus/dns.sh
@@ -84,7 +84,12 @@ set_dns_mod() { #DNS模式设置
dns_redir_port="$dns_port"
setconfig dns_redir_port
elif [ "$num" -lt 65535 -a "$num" -ge 1 ];then
- if [ -n "$(netstat -ntul | grep -E ":$num[[:space:]]")" ];then
+ if ckcmd netstat;then
+ port_test=$(netstat -ntul | grep -E ":$num[[:space:]]")
+ else
+ port_test=0
+ fi
+ if [ -n "$port_test" ];then
dns_redir_port="$num"
setconfig dns_redir_port "$dns_redir_port"
else
diff --git a/scripts/menus/fw_filter.sh b/scripts/menus/fw_filter.sh
new file mode 100644
index 00000000..89e6324b
--- /dev/null
+++ b/scripts/menus/fw_filter.sh
@@ -0,0 +1,412 @@
+#!/bin/sh
+# Copyright (C) Juewuy
+
+[ -n "$__IS_MODULE_FW_FILTER_LOADED" ] && return
+__IS_MODULE_FW_FILTER_LOADED=1
+
+set_fw_filter(){ #流量过滤
+ [ -z "$common_ports" ] && common_ports=ON
+ [ -z "$quic_rj" ] && quic_rj=OFF
+ [ -z "$cn_ip_route" ] && cn_ip_route=OFF
+ touch "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter
+ [ -z "$(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null)" ] && mac_return=OFF || mac_return=ON
+ echo "-----------------------------------------------"
+ echo -e " 1 过滤非常用端口： \033[36m$common_ports\033[0m ————用于过滤P2P流量"
+ echo -e " 2 过滤局域网设备： \033[36m$mac_return\033[0m ————使用黑/白名单进行过滤"
+ echo -e " 3 过滤QUIC协议: \033[36m$quic_rj\033[0m ————优化视频性能"
+ echo -e " 4 过滤CN_IP(6)列表: \033[36m$cn_ip_route\033[0m ————优化性能，不兼容Fake-ip"
+ echo -e " 5 自定义透明路由ipv4网段: 适合vlan等复杂网络环境"
+ echo -e " 6 自定义保留地址ipv4网段: 需要以保留地址为访问目标的环境"
+ echo "-----------------------------------------------"
+ echo -e " 0 返回上级菜单 \033[0m"
+ echo "-----------------------------------------------"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ 0)
+ ;;
+ 1)
+ echo "-----------------------------------------------"
+ if [ -n "$(pidof CrashCore)" ] && [ "$firewall_mod" = 'iptables' ]; then
+ read -p "切换时将停止服务，是否继续？(1/0) > " res
+ [ "$res" = 1 ] && "$CRASHDIR"/start.sh stop && set_common_ports
+ else
+ set_common_ports
+ fi
+ set_fw_filter
+ ;;
+ 2)
+ checkcfg_mac=$(cat "$CRASHDIR"/configs/mac)
+ fw_filter_lan
+ if [ -n "$PID" ]; then
+ checkcfg_mac_new=$(cat "$CRASHDIR"/configs/mac)
+ [ "$checkcfg_mac" != "$checkcfg_mac_new" ] && checkrestart
+ fi
+ set_fw_filter
+ ;;
+ 3)
+ echo "-----------------------------------------------"
+ if [ -n "$(echo "$redir_mod" | grep -oE '混合|Tproxy|Tun')" ]; then
+ if [ "$quic_rj" = "OFF" ]; then
+ echo -e "\033[33m已禁止QUIC流量通过ShellCrash内核！！\033[0m"
+ quic_rj=ON
+ else
+ echo -e "\033[33m已取消禁止QUIC协议流量！！\033[0m"
+ quic_rj=OFF
+ fi
+ setconfig quic_rj $quic_rj
+ else
+ echo -e "\033[33m当前模式默认不会代理UDP流量，无需设置！！\033[0m"
+ fi
+ sleep 1
+ set_fw_filter
+ ;;
+ 4)
+ if [ -n "$(ipset -v 2>/dev/null)" ] || [ "$firewall_mod" = 'nftables' ]; then
+ if [ "$cn_ip_route" = "OFF" ]; then
+ echo -e "\033[32m已开启CN_IP绕过内核功能！！\033[0m"
+ echo -e "\033[31m注意！！！此功能会导致全局模式及一切CN相关规则失效！！！\033[0m"
+ cn_ip_route=ON
+ sleep 2
+ else
+ echo -e "\033[33m已禁用CN_IP绕过内核功能！！\033[0m"
+ cn_ip_route=OFF
+ fi
+ setconfig cn_ip_route $cn_ip_route
+ else
+ echo -e "\033[31m当前设备缺少ipset模块或未使用nftables模式，无法启用绕过功能！！\033[0m"
+ sleep 1
+ fi
+ set_fw_filter
+ ;;
+ 5)
+ set_cust_host_ipv4
+ set_fw_filter
+ ;;
+ 6)
+ [ -z "$reserve_ipv4" ] && reserve_ipv4="0.0.0.0/8 10.0.0.0/8 127.0.0.0/8 100.64.0.0/10 169.254.0.0/16 172.16.0.0/12 192.168.0.0/16 224.0.0.0/4 240.0.0.0/4"
+ echo -e "当前网段：\033[36m$reserve_ipv4\033[0m"
+ echo -e "\033[33m地址必须是空格分隔，错误的设置可能导致网络回环或启动报错，请务必谨慎！\033[0m"
+ read -p "请输入 > " text
+ if [ -n "$(
+ echo $text | grep -E "(((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])/(3[0-2]|[1-2]?[0-9]))( +|$)+"
+ )" ]; then
+ reserve_ipv4="$text"
+ echo -e "已将保留地址网段设为：\033[32m$reserve_ipv4\033[0m"
+ setconfig reserve_ipv4 "'$reserve_ipv4'"
+ else
+ echo -e "\033[31m输入有误，操作已取消！\033[0m"
+ fi
+ sleep 1
+ set_fw_filter
+ ;;
+ *)
+ errornum
+ ;;
+ esac
+}
+set_common_ports() {
+ [ -z "$multiport" ] && multiport='22,80,443,8080,8443'
+ echo "-----------------------------------------------"
+ echo -e "\033[31m注意：\033[0mMIX模式下，所有fake-ip来源的非常用端口流量不会被过滤"
+ [ -n "$common_ports" ] &&
+ echo -e "当前放行端口：\033[36m$multiport\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 1 启用/关闭端口过滤: \033[36m$common_ports\033[0m"
+ echo -e " 2 添加放行端口"
+ echo -e " 3 移除指定放行端口"
+ echo -e " 4 重置默认放行端口"
+ echo -e " 5 重置为旧版放行端口"
+ echo -e " 0 返回上级菜单"
+ echo "-----------------------------------------------"
+ read -p "请输入对应数字 > " num
+ case $num in
+ 1)
+ if [ "$common_ports" = ON ];then
+ common_ports=OFF
+ else
+ common_ports=ON
+ fi
+ setconfig common_ports "$common_ports"
+ set_common_ports
+ ;;
+ 2)
+ port_count=$(echo "$multiport" | awk -F',' '{print NF}' )
+ if [ "$port_count" -ge 15 ];then
+ echo -e "\033[31m最多支持设置放行15个端口，请先减少一些！\033[0m"
+ else
+ read -p "请输入要放行的端口号 > " port
+ if echo ",$multiport," | grep -q ",$port,";then
+ echo -e "\033[31m输入错误！请勿重复添加！\033[0m"
+ elif [ "$port" -lt 1 ] || [ "$port" -gt 65535 ]; then
+ echo -e "\033[31m输入错误！请输入正确的数值(1-65535)！\033[0m"
+ else
+ multiport=$(echo "$multiport,$port" | sed "s/^,//")
+ setconfig multiport "$multiport"
+ fi
+ fi
+ sleep 1
+ set_common_ports
+ ;;
+ 3)
+ read -p "请输入要移除的端口号 > " port
+ if echo ",$multiport," | grep -q ",$port,";then
+ if [ "$port" -lt 1 ] || [ "$port" -gt 65535 ]; then
+ echo -e "\033[31m输入错误！请输入正确的数值(1-65535)！\033[0m"
+ else
+ multiport=$(echo ",$multiport," | sed "s/,$port//; s/^,//; s/,$//")
+ setconfig multiport "$multiport"
+ fi
+ else
+ echo -e "\033[31m输入错误！请输入已添加过的端口！\033[0m"
+ fi
+ sleep 1
+ set_common_ports
+ ;;
+ 4)
+ multiport=''
+ setconfig multiport
+ sleep 1
+ set_common_ports
+ ;;
+ 5)
+ multiport='22,80,143,194,443,465,587,853,993,995,5222,8080,8443'
+ setconfig multiport "$multiport"
+ sleep 1
+ set_common_ports
+ ;;
+ *)
+ errornum
+ ;;
+ esac
+}
+set_cust_host_ipv4() { #自定义ipv4透明路由网段
+ [ -z "$replace_default_host_ipv4" ] && replace_default_host_ipv4="OFF"
+ echo "-----------------------------------------------"
+ echo -e "当前默认透明路由的网段为: \033[32m$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep 'br' | grep -v 'iot' | grep -E ' 1(92|0|72)\.' | sed 's/.*inet.//g' | sed 's/br.*$//g' | sed 's/metric.*$//g' | tr '\n' ' ' && echo) \033[0m"
+ echo -e "当前已添加的自定义网段为:\033[36m$cust_host_ipv4\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 1 移除所有自定义网段"
+ echo -e " 2 使用自定义网段覆盖默认网段 \033[36m$replace_default_host_ipv4\033[0m"
+ echo -e " 0 返回上级菜单"
+ read -p "请输入对应的序号或需要额外添加的网段 > " text
+ case "$text" in
+ 2)
+ if [ "$replace_default_host_ipv4" == "OFF" ]; then
+ replace_default_host_ipv4="ON"
+ else
+ replace_default_host_ipv4="OFF"
+ fi
+ setconfig replace_default_host_ipv4 "$replace_default_host_ipv4"
+ set_cust_host_ipv4
+ ;;
+ 1)
+ unset cust_host_ipv4
+ setconfig cust_host_ipv4
+ set_cust_host_ipv4
+ ;;
+ 0) ;;
+ *)
+ if [ -n "$(echo $text | grep -Eo '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]{1,2}'$)" -a -z "$(echo $cust_host_ipv4 | grep "$text")" ]; then
+ cust_host_ipv4="$cust_host_ipv4 $text"
+ setconfig cust_host_ipv4 "'$cust_host_ipv4'"
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m请输入正确的网段地址！\033[0m"
+ fi
+ sleep 1
+ set_cust_host_ipv4
+ ;;
+ esac
+}
+fw_filter_lan() { #局域网设备过滤
+ get_devinfo() {
+ dev_ip=$(cat $dhcpdir | grep " $dev " | awk '{print $3}') && [ -z "$dev_ip" ] && dev_ip=$dev
+ dev_mac=$(cat $dhcpdir | grep " $dev " | awk '{print $2}') && [ -z "$dev_mac" ] && dev_mac=$dev
+ dev_name=$(cat $dhcpdir | grep " $dev " | awk '{print $4}') && [ -z "$dev_name" ] && dev_name='未知设备'
+ }
+ add_mac() {
+ echo "-----------------------------------------------"
+ echo 已添加的mac地址：
+ cat "$CRASHDIR"/configs/mac 2>/dev/null
+ echo "-----------------------------------------------"
+ echo -e "\033[33m序号 设备IP 设备mac地址 设备名称\033[32m"
+ cat $dhcpdir | awk '{print " "NR" "$3,$2,$4}'
+ echo -e "\033[0m-----------------------------------------------"
+ echo -e "手动输入mac地址时仅支持\033[32mxx:xx:xx:xx:xx:xx\033[0m的形式"
+ echo -e " 0 或回车 结束添加"
+ echo "-----------------------------------------------"
+ read -p "请输入对应序号或直接输入mac地址 > " num
+ if [ -z "$num" -o "$num" = 0 ]; then
+ i=
+ elif [ -n "$(echo $num | grep -aE '^([0-9A-Fa-f]{2}[:]){5}([0-9A-Fa-f]{2})$')" ]; then
+ if [ -z "$(cat "$CRASHDIR"/configs/mac | grep -E "$num")" ]; then
+ echo $num | grep -oE '^([0-9A-Fa-f]{2}[:]){5}([0-9A-Fa-f]{2})$' >>"$CRASHDIR"/configs/mac
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
+ fi
+ add_mac
+ elif [ $num -le $(cat $dhcpdir 2>/dev/null | awk 'END{print NR}') ]; then
+ macadd=$(cat $dhcpdir | awk '{print $2}' | sed -n "$num"p)
+ if [ -z "$(cat "$CRASHDIR"/configs/mac | grep -E "$macadd")" ]; then
+ echo $macadd >>"$CRASHDIR"/configs/mac
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
+ fi
+ add_mac
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m输入有误，请重新输入！\033[0m"
+ add_mac
+ fi
+ }
+ add_ip() {
+ echo "-----------------------------------------------"
+ echo "已添加的IP地址(段)："
+ cat "$CRASHDIR"/configs/ip_filter 2>/dev/null
+ echo "-----------------------------------------------"
+ echo -e "\033[33m序号 设备IP 设备名称\033[32m"
+ cat $dhcpdir | awk '{print " "NR" "$3,$4}'
+ echo -e "\033[0m-----------------------------------------------"
+ echo -e "手动输入时仅支持\033[32m 192.168.1.0/24\033[0m 或 \033[32m192.168.1.0\033[0m 的形式"
+ echo -e "不支持ipv6地址过滤，如有需求请使用mac地址过滤"
+ echo -e " 0 或回车 结束添加"
+ echo "-----------------------------------------------"
+ read -p "请输入对应序号或直接输入IP地址段 > " num
+ if [ -z "$num" -o "$num" = 0 ]; then
+ i=
+ elif [ -n "$(echo $num | grep -aE '^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)(/(3[0-2]|[12]?[0-9]))?$')" ]; then
+ if [ -z "$(cat "$CRASHDIR"/configs/ip_filter | grep -E "$num")" ]; then
+ echo $num | grep -oE '^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)(/(3[0-2]|[12]?[0-9]))?$' >>"$CRASHDIR"/configs/ip_filter
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m已添加的地址，请勿重复添加！\033[0m"
+ fi
+ add_ip
+ elif [ $num -le $(cat $dhcpdir 2>/dev/null | awk 'END{print NR}') ]; then
+ ipadd=$(cat $dhcpdir | awk '{print $3}' | sed -n "$num"p)
+ if [ -z "$(cat "$CRASHDIR"/configs/mac | grep -E "$ipadd")" ]; then
+ echo $ipadd >>"$CRASHDIR"/configs/ip_filter
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m已添加的地址，请勿重复添加！\033[0m"
+ fi
+ add_ip
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m输入有误，请重新输入！\033[0m"
+ add_ip
+ fi
+ }
+ del_all() {
+ echo "-----------------------------------------------"
+ if [ -z "$(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null)" ]; then
+ echo -e "\033[31m列表中没有需要移除的设备！\033[0m"
+ sleep 1
+ else
+ echo -e "请选择需要移除的设备：\033[36m"
+ echo -e "\033[33m 设备IP 设备mac地址 设备名称\033[0m"
+ i=1
+ for dev in $(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null); do
+ get_devinfo
+ echo -e " $i \033[32m$dev_ip \033[36m$dev_mac \033[32m$dev_name\033[0m"
+ i=$((i + 1))
+ done
+ echo "-----------------------------------------------"
+ echo -e "\033[0m 0 或回车 结束删除"
+ read -p "请输入需要移除的设备的对应序号 > " num
+ mac_filter_rows=$(cat "$CRASHDIR"/configs/mac 2>/dev/null | wc -l)
+ ip_filter_rows=$(cat "$CRASHDIR"/configs/ip_filter 2>/dev/null | wc -l)
+ if [ -z "$num" ] || [ "$num" -le 0 ]; then
+ n=
+ elif [ $num -le $mac_filter_rows ]; then
+ sed -i "${num}d" "$CRASHDIR"/configs/mac
+ echo "-----------------------------------------------"
+ echo -e "\033[32m对应设备已移除！\033[0m"
+ del_all
+ elif [ $num -le $((mac_filter_rows + ip_filter_rows)) ]; then
+ num=$((num - mac_filter_rows))
+ sed -i "${num}d" "$CRASHDIR"/configs/ip_filter
+ echo "-----------------------------------------------"
+ echo -e "\033[32m对应设备已移除！\033[0m"
+ del_all
+ else
+ echo "-----------------------------------------------"
+ echo -e "\033[31m输入有误，请重新输入！\033[0m"
+ del_all
+ fi
+ fi
+ }
+ echo "-----------------------------------------------"
+ [ -z "$dhcpdir" ] && [ -f /var/lib/dhcp/dhcpd.leases ] && dhcpdir='/var/lib/dhcp/dhcpd.leases'
+ [ -z "$dhcpdir" ] && [ -f /var/lib/dhcpd/dhcpd.leases ] && dhcpdir='/var/lib/dhcpd/dhcpd.leases'
+ [ -z "$dhcpdir" ] && [ -f /tmp/dhcp.leases ] && dhcpdir='/tmp/dhcp.leases'
+ [ -z "$dhcpdir" ] && [ -f /tmp/dnsmasq.leases ] && dhcpdir='/tmp/dnsmasq.leases'
+ [ -z "$dhcpdir" ] && dhcpdir='/dev/null'
+ [ -z "$macfilter_type" ] && macfilter_type='黑名单'
+ if [ "$macfilter_type" = "黑名单" ]; then
+ fw_filter_lan_over='白名单'
+ fw_filter_lan_scrip='不'
+ else
+ fw_filter_lan_over='黑名单'
+ fw_filter_lan_scrip=''
+ fi
+ ######
+ echo -e "\033[30;47m请在此添加或移除设备\033[0m"
+ echo -e "当前过滤方式为：\033[33m$fw_filter_lan_type模式\033[0m"
+ echo -e "仅列表内设备流量\033[36m$fw_filter_lan_scrip经过\033[0m内核"
+ if [ -n "$(cat "$CRASHDIR"/configs/mac)" ]; then
+ echo "-----------------------------------------------"
+ echo -e "当前已过滤设备为：\033[36m"
+ echo -e "\033[33m 设备mac/ip地址 设备名称\033[0m"
+ for dev in $(cat "$CRASHDIR"/configs/mac 2>/dev/null); do
+ get_devinfo
+ echo -e "\033[36m$dev_mac \033[0m$dev_name"
+ done
+ for dev in $(cat "$CRASHDIR"/configs/ip_filter 2>/dev/null); do
+ get_devinfo
+ echo -e "\033[32m$dev_ip \033[0m$dev_name"
+ done
+ echo "-----------------------------------------------"
+ fi
+ echo -e " 1 切换为\033[33m$fw_filter_lan_over模式\033[0m"
+ echo -e " 2 \033[32m添加指定设备(mac地址)\033[0m"
+ echo -e " 3 \033[32m添加指定设备(IP地址/网段)\033[0m"
+ echo -e " 4 \033[36m移除指定设备\033[0m"
+ echo -e " 9 \033[31m清空整个列表\033[0m"
+ echo -e " 0 返回上级菜单"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ 0) ;;
+ 1)
+ macfilter_type=$fw_filter_lan_over
+ setconfig macfilter_type $macfilter_type
+ echo "-----------------------------------------------"
+ echo -e "\033[32m已切换为$fw_filter_lan_type模式！\033[0m"
+ fw_filter_lan
+ ;;
+ 2)
+ add_mac
+ fw_filter_lan
+ ;;
+ 3)
+ add_ip
+ fw_filter_lan
+ ;;
+ 4)
+ del_all
+ fw_filter_lan
+ ;;
+ 9)
+ : >"$CRASHDIR"/configs/mac
+ : >"$CRASHDIR"/configs/ip_filter
+ echo "-----------------------------------------------"
+ echo -e "\033[31m设备列表已清空！\033[0m"
+ fw_filter_lan
+ ;;
+ *)
+ errornum
+ ;;
+ esac
+}
diff --git a/scripts/menus/running_status.sh b/scripts/menus/running_status.sh
index 38419d2c..1e0245a9 100644
--- a/scripts/menus/running_status.sh
+++ b/scripts/menus/running_status.sh
@@ -1,6 +1,6 @@
running_status(){
- VmRSS=$(cat /proc/$PID/status | grep -w VmRSS | awk 'unit="MB" {printf "%.2f %s\n", $2/1000, unit}')
+ VmRSS=$(awk '/^VmRSS:/ {printf "%.2f MB\n", ($2 * 1024) / 1000000}' /proc/$PID/status)
#获取运行时长
touch "$TMPDIR"/crash_start_time #用于延迟启动的校验
start_time=$(cat "$TMPDIR"/crash_start_time)
diff --git a/scripts/menus/userguide.sh b/scripts/menus/userguide.sh
new file mode 100644
index 00000000..4c8be741
--- /dev/null
+++ b/scripts/menus/userguide.sh
@@ -0,0 +1,127 @@
+#!/bin/sh
+# Copyright (C) Juewuy
+
+[ -n "$__IS_MODULE_USERGUIDE_LOADED" ] && return
+__IS_MODULE_USERGUIDE_LOADED=1
+
+#新手引导
+userguide(){
+ . "$CRASHDIR"/libs/check_dir_avail.sh
+ forwhat(){
+ echo "-----------------------------------------------"
+ echo -e "\033[30;46m 欢迎使用ShellCrash新手引导！ \033[0m"
+ echo "-----------------------------------------------"
+ echo -e "\033[33m请先选择你的使用环境： \033[0m"
+ echo -e "\033[0m(你之后依然可以在设置中更改各种配置)\033[0m"
+ echo "-----------------------------------------------"
+ echo -e " 1 \033[32m路由设备配置局域网透明代理\033[0m"
+ echo -e " 2 \033[36mLinux设备仅配置本机代理\033[0m"
+ [ -f "$CFG_PATH.bak" ] && echo -e " 3 \033[33m还原之前备份的设置\033[0m"
+ echo "-----------------------------------------------"
+ read -p "请输入对应数字 > " num
+ case "$num" in
+ 1)
+ #设置运行模式
+ redir_mod="混合模式"
+ [ -n "$(echo $cputype | grep -E "linux.*mips.*")" ] && {
+ if grep -qE '^TPROXY$' /proc/net/ip_tables_targets || modprobe xt_TPROXY >/dev/null 2>&1; then
+ redir_mod="Tproxy模式"
+ else
+ redir_mod="Redir模式"
+ fi
+ }
+ [ -z "$crashcore" ] && crashcore=meta
+ setconfig crashcore "$crashcore"
+ setconfig redir_mod "$redir_mod"
+ setconfig dns_mod mix
+ setconfig firewall_area '1'
+ #默认启用绕过CN-IP
+ setconfig cn_ip_route ON
+ #自动识别IPV6
+ [ -n "$(ip a 2>&1 | grep -w 'inet6' | grep -E 'global' | sed 's/.*inet6.//g' | sed 's/scope.*$//g')" ] && {
+ setconfig ipv6_redir ON
+ setconfig ipv6_support ON
+ setconfig ipv6_dns ON
+ setconfig cn_ipv6_route ON
+ }
+ #设置开机启动
+ [ -f /etc/rc.common -a "$(cat /proc/1/comm)" = "procd" ] && /etc/init.d/shellcrash enable
+ ckcmd systemctl && [ "$(cat /proc/1/comm)" = "systemd" ] && systemctl enable shellcrash.service > /dev/null 2>&1
+ rm -rf "$CRASHDIR"/.dis_startup
+ autostart=enable
+ #检测IP转发
+ if [ "$(cat /proc/sys/net/ipv4/ip_forward)" = "0" ];then
+ echo "-----------------------------------------------"
+ echo -e "\033[33m检测到你的设备尚未开启ip转发，局域网设备将无法正常连接网络，是否立即开启？\033[0m"
+ read -p "是否开启？(1/0) > " res
+ [ "$res" = 1 ] && {
+ echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf
+ sysctl -w net.ipv4.ip_forward=1
+ } && echo "已成功开启ipv4转发，如未正常开启，请手动重启设备！" || echo "开启失败！请自行谷歌查找当前设备的开启方法！"
+ fi
+ #禁止docker启用的net.bridge.bridge-nf-call-iptables
+ sysctl -w net.bridge.bridge-nf-call-iptables=0 > /dev/null 2>&1
+ sysctl -w net.bridge.bridge-nf-call-ip6tables=0 > /dev/null 2>&1
+ ;;
+ 2)
+ setconfig redir_mod "Redir模式"
+ [ -n "$(echo $cputype | grep -E "linux.*mips.*")" ] && setconfig crashcore "clash"
+ setconfig common_ports "OFF"
+ setconfig firewall_area '2'
+ ;;
+ 3)
+ mv -f $CFG_PATH.bak $CFG_PATH
+ echo -e "\033[32m脚本设置已还原！\033[0m"
+ echo -e "\033[33m请重新启动脚本！\033[0m"
+ exit 0
+ ;;
+ *)
+ errornum
+ forwhat
+ ;;
+ esac
+ }
+ forwhat
+ #检测小内存模式
+ dir_size=$(dir_avail "$CRASHDIR")
+ if [ "$dir_size" -lt 10240 ];then
+ echo "-----------------------------------------------"
+ echo -e "\033[33m检测到你的安装目录空间不足10M，是否开启小闪存模式？\033[0m"
+ echo -e "\033[0m开启后核心及数据库文件将被下载到内存中，这将占用一部分内存空间\033[0m"
+ echo -e "\033[0m每次开机后首次运行服务时都会自动的重新下载相关文件\033[0m"
+ echo "-----------------------------------------------"
+ read -p "是否开启？(1/0) > " res
+ [ "$res" = 1 ] && {
+ BINDIR=/tmp/ShellCrash
+ setconfig BINDIR /tmp/ShellCrash "$CRASHDIR"/configs/command.env
+ }
+ fi
+ #启用推荐的自动任务配置
+ . "$CRASHDIR"/menus/5_task.sh && task_recom
+ #小米设备软固化
+ if [ "$systype" = "mi_snapshot" ];then
+ echo "-----------------------------------------------"
+ echo -e "\033[33m检测到为小米路由设备，启用软固化可防止路由升级后丢失SSH\033[0m"
+ read -p "是否启用软固化功能？(1/0) > " res
+ [ "$res" = 1 ] && mi_autoSSH
+ fi
+ #提示导入订阅或者配置文件
+ [ ! -s "$CRASHDIR"/yamls/config.yaml -a ! -s "$CRASHDIR"/jsons/config.json ] && {
+ echo "-----------------------------------------------"
+ echo -e "\033[32m是否导入配置文件？\033[0m(这是运行前的最后一步)"
+ echo -e "\033[0m你必须拥有一份配置文件才能运行服务！\033[0m"
+ echo "-----------------------------------------------"
+ read -p "现在开始导入？(1/0) > " res
+ [ "$res" = 1 ] && inuserguide=1 && {
+ . "$CRASHDIR"/menus/6_core_config.sh && set_core_config
+ inuserguide=""
+ }
+ }
+ #回到主界面
+ echo "-----------------------------------------------"
+ echo -e "\033[36m很好！现在只需要执行启动就可以愉快的使用了！\033[0m"
+ echo "-----------------------------------------------"
+ read -p "立即启动服务？(1/0) > " res
+ [ "$res" = 1 ] && start_core && sleep 2
+ return 0
+}
diff --git a/scripts/start.sh b/scripts/start.sh
index e024559c..3e7142fb 100644
--- a/scripts/start.sh
+++ b/scripts/start.sh
@@ -16,13 +16,13 @@
. "$CRASHDIR"/libs/web_save.sh
#特殊脚本
bfstart(){
- . "$CRASHDIR"/starts/bfstart.sh
+ "$CRASHDIR"/starts/bfstart.sh
}
afstart(){
- . "$CRASHDIR"/starts/afstart.sh
+ "$CRASHDIR"/starts/afstart.sh
}
stop_firewall(){
- . "$CRASHDIR"/starts/fw_stop.sh
+ "$CRASHDIR"/starts/fw_stop.sh
}
#保守模式启动
start_l(){
diff --git a/scripts/starts/fw_getlanip.sh b/scripts/starts/fw_getlanip.sh
index 1e5d6aa4..4440ff91 100644
--- a/scripts/starts/fw_getlanip.sh
+++ b/scripts/starts/fw_getlanip.sh
@@ -2,7 +2,7 @@
getlanip() { #获取局域网host地址
i=1
while [ "$i" -le "20" ]; do
- host_ipv4=$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep 'brd' | grep -Ev 'utun|iot|peer|docker|podman|virbr|vnet|ovs|vmbr|veth|vmnic|vboxnet|lxcbr|xenbr|vEthernet' | grep -E ' 1(92|0|72)\.' | sed 's/.*inet.//g' | sed 's/br.*$//g' | sed 's/metric.*$//g') #ipv4局域网网段
+ host_ipv4=$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep 'brd' | grep -Ev 'utun|iot|peer|docker|podman|virbr|vnet|ovs|vmbr|veth|vmnic|vboxnet|lxcbr|xenbr|vEthernet' | grep -E ' 1(92|0|72)\.' | sed 's/.*inet.//g' | sed 's/[[:space:]]br.*$//g' | sed 's/metric.*$//g') #ipv4局域网网段
[ "$ipv6_redir" = "ON" ] && host_ipv6=$(ip a 2>&1 | grep -w 'inet6' | grep -E 'global' | sed 's/.*inet6.//g' | sed 's/scope.*$//g') #ipv6公网地址段
[ -f "$TMPDIR"/ShellCrash.log ] && break
[ -n "$host_ipv4" -a "$ipv6_redir" != "ON" ] && break
diff --git a/scripts/starts/singbox_modify.sh b/scripts/starts/singbox_modify.sh
index e1c02052..a91edb4a 100644
--- a/scripts/starts/singbox_modify.sh
+++ b/scripts/starts/singbox_modify.sh
@@ -200,20 +200,21 @@ EOF
EOF
#生成add_route.json
#域名嗅探配置
- [ "$sniffer" = ON ] && sniffer_set='{ "action": "sniff", "timeout": "500ms" },'
- [ "$ts_service" = ON ] && tailscale_set='{ "inbound": [ "ts-ep" ], "port": 53, "action": "hijack-dns" },'
+ [ "$sniffer" = ON ] && ! grep -Eq '"action" *:[[:space:]]*"sniff"' "$CRASHDIR"/jsons/*.json && sniffer_set='{ "action": "sniff", "timeout": "500ms" },'
+ [ "$ts_service" = ON ] && tailscale_set='{ "inbound": [ "ts-ep" ], "port": 53, "action": "hijack-dns" },'
+ sed -i '/"clash_mode".*"outbound"/d' "$CRASHDIR"/jsons/*.json
cat >"$TMPDIR"/jsons/add_route.json <