mirror of
https://github.com/juewuy/ShellCrash.git
synced 2026-03-11 07:51:45 +00:00
~拆分脚本，大幅度优化结构
This commit is contained in:
juewuy
@@ -1,17 +1,17 @@
|
||||
#!/bin/sh
|
||||
# Copyright (C) Juewuy
|
||||
|
||||
|
||||
if [ $1 -gt 65535 -o $1 -le 1 ]; then
|
||||
echo -e "\033[31m输入错误！请输入正确的数值(1-65535)！\033[0m"
|
||||
exit 1
|
||||
elif [ -n "$(echo "|$mix_port|$redir_port|$dns_port|$db_port|" | grep "|$1|")" ]; then
|
||||
echo -e "\033[31m输入错误！请不要输入重复的端口！\033[0m"
|
||||
exit 1
|
||||
elif [ -n "$(netstat -ntul | grep ":$1 ")" ]; then
|
||||
echo -e "\033[31m当前端口已被其他进程占用，请重新输入！\033[0m"
|
||||
exit 1
|
||||
else
|
||||
exit 0
|
||||
fi
|
||||
|
||||
check_port(){
|
||||
if [ "$1" -gt 65535 -o "$1" -le 1 ]; then
|
||||
echo -e "\033[31m输入错误！请输入正确的数值(1-65535)！\033[0m"
|
||||
return 1
|
||||
elif [ -n "$(echo "|$mix_port|$redir_port|$dns_port|$db_port|" | grep "|$1|")" ]; then
|
||||
echo -e "\033[31m输入错误！请不要输入重复的端口！\033[0m"
|
||||
return 1
|
||||
elif [ -n "$(netstat -ntul | grep ":$1 ")" ]; then
|
||||
echo -e "\033[31m当前端口已被其他进程占用，请重新输入！\033[0m"
|
||||
return 1
|
||||
else
|
||||
return 0
|
||||
fi
|
||||
}
|
||||
|
||||
1177
scripts/menus/core_config.sh
Normal file
1177
scripts/menus/core_config.sh
Normal file
File diff suppressed because it is too large
Load Diff
179
scripts/menus/ddns.sh
Normal file
179
scripts/menus/ddns.sh
Normal file
@@ -0,0 +1,179 @@
|
||||
#! /bin/bash
|
||||
# Copyright (C) Juewuy
|
||||
|
||||
|
||||
ddns_menu(){
|
||||
echo -----------------------------------------------
|
||||
echo -e "\033[30;46m欢迎使用DDNS！\033[0m"
|
||||
load_ddns
|
||||
}
|
||||
add_ddns() {
|
||||
cat >>$ddns_dir <<EOF
|
||||
|
||||
config service '$service'
|
||||
option enabled '1'
|
||||
option force_unit 'hours'
|
||||
option lookup_host '$domain'
|
||||
option service_name '$service_name'
|
||||
option domain '$domain'
|
||||
option username '$username'
|
||||
option use_https '0'
|
||||
option use_ipv6 '$use_ipv6'
|
||||
option password '$password'
|
||||
option ip_source 'web'
|
||||
option ip_url 'http://ip.sb'
|
||||
option check_unit 'minutes'
|
||||
option check_interval '$check_interval'
|
||||
option force_interval '$force_interval'
|
||||
option interface 'wan'
|
||||
option bind_network 'wan'
|
||||
EOF
|
||||
/usr/lib/ddns/dynamic_dns_updater.sh -S $service start >/dev/null 2>&1 &
|
||||
sleep 3
|
||||
echo 服务已经添加！
|
||||
}
|
||||
set_ddns() {
|
||||
echo -----------------------------------------------
|
||||
read -p "请输入你的域名 > " str
|
||||
[ -z "$str" ] && domain=$domain || domain=$str
|
||||
echo -----------------------------------------------
|
||||
read -p "请输入用户名或邮箱 > " str
|
||||
[ -z "$str" ] && username=$username || username=$str
|
||||
echo -----------------------------------------------
|
||||
read -p "请输入密码或令牌秘钥 > " str
|
||||
[ -z "$str" ] && password=$password || password=$str
|
||||
echo -----------------------------------------------
|
||||
read -p "请输入检测更新间隔(单位:分钟;默认为10) > " check_interval
|
||||
[ -z "$check_interval" ] || [ "$check_interval" -lt 1 -o "$check_interval" -gt 1440 ] && check_interval=10
|
||||
echo -----------------------------------------------
|
||||
read -p "请输入强制更新间隔(单位:小时;默认为24) > " force_interval
|
||||
[ -z "$force_interval" ] || [ "$force_interval" -lt 1 -o "$force_interval" -gt 240 ] && force_interval=24
|
||||
echo -----------------------------------------------
|
||||
echo -e "请核对如下信息："
|
||||
echo -e "服务商： \033[32m$service\033[0m"
|
||||
echo -e "域名： \033[32m$domain\033[0m"
|
||||
echo -e "用户名： \033[32m$username\033[0m"
|
||||
echo -e "检测间隔： \033[32m$check_interval\033[0m"
|
||||
echo -----------------------------------------------
|
||||
read -p "确认添加？(1/0) > " res
|
||||
[ "$res" = 1 ] && add_ddns || set_ddns
|
||||
}
|
||||
set_ddns_service() {
|
||||
services_dir=/etc/ddns/$serv
|
||||
[ -s $services_dir ] || services_dir=/usr/share/ddns/list
|
||||
echo -----------------------------------------------
|
||||
echo -e "\033[32m请选择服务提供商\033[0m"
|
||||
cat $services_dir | grep -v '^#' | awk '{print " "NR" " $1}'
|
||||
nr=$(cat $services_dir | grep -v '^#' | wc -l)
|
||||
read -p "请输入对应数字 > " num
|
||||
if [ -z "$num" ]; then
|
||||
i=
|
||||
elif [ "$num" -gt 0 -a "$num" -lt $nr ]; then
|
||||
service_name=$(cat $services_dir | grep -v '^#' | awk '{print $1}' | sed -n "$num"p | sed 's/"//g')
|
||||
service=$(echo $service_name | sed 's/\./_/g')
|
||||
set_ddns
|
||||
else
|
||||
echo "输入错误，请重新输入！"
|
||||
sleep 1
|
||||
set_ddns_service
|
||||
fi
|
||||
}
|
||||
set_ddns_type() {
|
||||
echo -----------------------------------------------
|
||||
echo -e "\033[32m请选择网络模式\033[0m"
|
||||
echo -e " 1 \033[36mIPV4\033[0m"
|
||||
echo -e " 2 \033[36mIPV6\033[0m"
|
||||
read -p "请输入对应数字 > " num
|
||||
if [ -z "$num" ]; then
|
||||
i=
|
||||
elif [ "$num" = 1 ]; then
|
||||
use_ipv6=0
|
||||
serv=services
|
||||
set_ddns_service
|
||||
elif [ "$num" = 2 ]; then
|
||||
use_ipv6=1
|
||||
serv=services_ipv6
|
||||
set_ddns_service
|
||||
else
|
||||
echo "输入错误，请重新输入！"
|
||||
sleep 1
|
||||
set_ddns_type
|
||||
fi
|
||||
}
|
||||
rev_ddns_service() {
|
||||
enabled=$(uci show ddns.$service | grep 'enabled' | awk -F "=" '{print $2}' | tr -d "'\"")
|
||||
[ "$enabled" = 1 ] && enabled_b="停用" || enabled_b="启用"
|
||||
echo -----------------------------------------------
|
||||
echo -e " 1 \033[32m立即更新\033[0m"
|
||||
echo -e " 2 编辑当前服务\033[0m"
|
||||
echo -e " 3 $enabled_b当前服务"
|
||||
echo -e " 4 移除当前服务"
|
||||
echo -e " 5 查看运行日志"
|
||||
echo -e " 0 返回上级菜单"
|
||||
echo -----------------------------------------------
|
||||
read -p "请输入对应数字 > " num
|
||||
if [ -z "$num" -o "$num" = 0 ]; then
|
||||
i=
|
||||
elif [ "$num" = 1 ]; then
|
||||
/usr/lib/ddns/dynamic_dns_updater.sh -S $service start >/dev/null 2>&1 &
|
||||
sleep 3
|
||||
elif [ "$num" = 2 ]; then
|
||||
domain=$(uci show ddns.$service | grep 'domain' | awk -F "=" '{print $2}' | tr -d "'\"")
|
||||
username=$(uci show ddns.$service | grep 'username' | awk -F "=" '{print $2}' | tr -d "'\"")
|
||||
password=$(uci show ddns.$service | grep 'password' | awk -F "=" '{print $2}' | tr -d "'\"")
|
||||
service_name=$(uci show ddns.$service | grep 'service_name' | awk -F "=" '{print $2}' | tr -d "'\"")
|
||||
uci delete ddns.$service
|
||||
set_ddns
|
||||
elif [ "$num" = 3 ]; then
|
||||
[ "$enabled" = 1 ] && uci set ddns.$service.enabled='0' || uci set ddns.$service.enabled='1' && sleep 3
|
||||
uci commit ddns.$service
|
||||
elif [ "$num" = 4 ]; then
|
||||
uci delete ddns.$service
|
||||
uci commit ddns.$service
|
||||
elif [ "$num" = 5 ]; then
|
||||
echo -----------------------------------------------
|
||||
cat /var/log/ddns/$service.log 2>/dev/null
|
||||
sleep 1
|
||||
fi
|
||||
}
|
||||
load_ddns() {
|
||||
ddns_dir=/etc/config/ddns
|
||||
tmp_dir="$TMPDIR"/ddns
|
||||
[ ! -f "$ddns_dir" ] && {
|
||||
echo -e "\033[31m本脚本依赖OpenWrt内置的DDNS服务,当前设备无法运行,已退出！\033[0m"
|
||||
sleep 1
|
||||
return 1
|
||||
}
|
||||
nr=0
|
||||
cat $ddns_dir | grep 'config service' | awk '{print $3}' | sed "s/\'//g" | sed "s/\"//g" >$tmp_dir
|
||||
echo -----------------------------------------------
|
||||
echo -e "列表 域名 启用 IP地址"
|
||||
echo -----------------------------------------------
|
||||
for service in $(cat $tmp_dir); do
|
||||
#echo $service >>$tmp_dir
|
||||
nr=$((nr + 1))
|
||||
enabled=$(uci show ddns.$service 2>/dev/null | grep 'enabled' | awk -F "=" '{print $2}' | tr -d "'\"")
|
||||
domain=$(uci show ddns.$service 2>/dev/null | grep 'domain' | awk -F "=" '{print $2}' | tr -d "'\"")
|
||||
local_ip=$(sed '1!G;h;$!d' /var/log/ddns/$service.log 2>/dev/null | grep -E 'Registered IP' | tail -1 | awk -F "'" '{print $2}' | tr -d "'\"")
|
||||
echo -e " $nr $domain $enabled $local_ip"
|
||||
done
|
||||
echo -e " $((nr + 1)) 添加DDNS服务"
|
||||
echo -e " 0 退出"
|
||||
echo -----------------------------------------------
|
||||
read -p "请输入对应序号 > " num
|
||||
if [ -z "$num" -o "$num" = 0 ]; then
|
||||
i=
|
||||
elif [ "$num" -gt $nr ]; then
|
||||
set_ddns_type
|
||||
load_ddns
|
||||
elif [ "$num" -gt 0 -a "$num" -le $nr ]; then
|
||||
service=$(cat $tmp_dir | sed -n "$num"p)
|
||||
rev_ddns_service
|
||||
load_ddns
|
||||
else
|
||||
echo "请输入正确数字！" && load_ddns
|
||||
fi
|
||||
rm -rf $tmp_dir
|
||||
}
|
||||
|
||||
|
||||
258
scripts/menus/dns.sh
Normal file
258
scripts/menus/dns.sh
Normal file
@@ -0,0 +1,258 @@
|
||||
#!/bin/sh
|
||||
# Copyright (C) Juewuy
|
||||
|
||||
set_dns_mod() { #DNS模式设置
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "当前DNS运行模式为：\033[47;30m $dns_mod \033[0m"
|
||||
echo -e "\033[33m切换模式后需要手动重启服务以生效！\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 fake-ip模式： 响应快，\033[33m兼容性较差\033[0m"
|
||||
echo -e " 不支持CN-IP绕过功能"
|
||||
echo -e " 2 redir_host模式：\033[33m不安全，易被污染\033[0m"
|
||||
echo -e " 建议搭配第三方DNS服务使用"
|
||||
if echo "$crashcore" | grep -q 'singbox' || [ "$crashcore" = meta ]; then
|
||||
echo -e " 3 mix混合模式： \033[32m防污染防泄露，响应快，推荐！\033[0m"
|
||||
echo -e " cn域名realip其他fakeip分流"
|
||||
echo -e " 4 route模式： \033[32m防污染防泄露，全真实IP\033[0m"
|
||||
echo -e " cn域名realip其他dns2proxy分流"
|
||||
fi
|
||||
[ "$dns_mod" = "fake-ip" ] || [ "$dns_mod" = "mix" ] &&
|
||||
echo -e " 8 管理Fake-ip过滤列表"
|
||||
echo -e " 9 \033[36mDNS进阶设置\033[0m"
|
||||
echo " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
dns_mod=fake-ip
|
||||
setconfig dns_mod $dns_mod
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
|
||||
set_dns_mod
|
||||
;;
|
||||
2)
|
||||
dns_mod=redir_host
|
||||
setconfig dns_mod $dns_mod
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
|
||||
set_dns_mod
|
||||
;;
|
||||
3)
|
||||
if echo "$crashcore" | grep -q 'singbox' || [ "$crashcore" = meta ]; then
|
||||
dns_mod=mix
|
||||
setconfig dns_mod $dns_mod
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
|
||||
else
|
||||
echo -e "\033[31m当前内核不支持的功能！！！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
set_dns_mod
|
||||
;;
|
||||
4)
|
||||
if echo "$crashcore" | grep -q 'singbox' || [ "$crashcore" = meta ]; then
|
||||
dns_mod=route
|
||||
setconfig dns_mod $dns_mod
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
|
||||
else
|
||||
echo -e "\033[31m当前内核不支持的功能！！！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
set_dns_mod
|
||||
;;
|
||||
8)
|
||||
echo "-----------------------------------------------"
|
||||
fake_ip_filter
|
||||
set_dns_mod
|
||||
;;
|
||||
9)
|
||||
set_dns_adv
|
||||
set_dns_mod
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
fake_ip_filter() {
|
||||
echo -e "\033[32m用于解决Fake-ip模式下部分地址或应用无法连接的问题\033[0m"
|
||||
echo -e "\033[31m脚本已经内置了大量地址，你只需要添加出现问题的地址！\033[0m"
|
||||
echo -e "\033[36m示例：a.b.com"
|
||||
echo -e "示例：*.b.com"
|
||||
echo -e "示例：*.*.b.com\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
if [ -s ${CRASHDIR}/configs/fake_ip_filter ]; then
|
||||
echo -e "\033[33m已添加Fake-ip过滤地址：\033[0m"
|
||||
cat ${CRASHDIR}/configs/fake_ip_filter | awk '{print NR" "$1}'
|
||||
else
|
||||
echo -e "\033[33m你还未添加Fake-ip过滤地址\033[0m"
|
||||
fi
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m输入数字直接移除对应地址，输入地址直接添加！\033[0m"
|
||||
read -p "请输入数字或地址 > " input
|
||||
case "$input" in
|
||||
0) ;;
|
||||
'') ;;
|
||||
*)
|
||||
if [ $input -ge 1 ] 2>/dev/null; then
|
||||
sed -i "${input}d" ${CRASHDIR}/configs/fake_ip_filter 2>/dev/null
|
||||
echo -e "\033[32m移除成功！\033[0m"
|
||||
else
|
||||
echo -e "你输入的地址是：\033[32m$input\033[0m"
|
||||
read -p "确认添加？(1/0) > " res
|
||||
[ "$res" = 1 ] && echo $input >>${CRASHDIR}/configs/fake_ip_filter
|
||||
fi
|
||||
sleep 1
|
||||
fake_ip_filter
|
||||
;;
|
||||
esac
|
||||
}
|
||||
set_dns_adv() { #DNS详细设置
|
||||
[ -z "$dns_nameserver" ] && dns_nameserver='223.5.5.5, 1.2.4.8'
|
||||
[ -z "$dns_fallback" ] && dns_fallback="1.1.1.1, 8.8.8.8"
|
||||
[ -z "$dns_resolver" ] && dns_resolver="223.5.5.5, 2400:3200::1"
|
||||
[ -z "$hosts_opt" ] && hosts_opt=已启用
|
||||
[ -z "$dns_protect" ] && dns_protect=ON
|
||||
[ -z "$dns_redir" ] && dns_redir=未开启
|
||||
[ -z "$dns_no" ] && dns_no=未禁用
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "当前基础DNS：\033[32m$dns_nameserver\033[0m"
|
||||
echo -e "PROXY-DNS：\033[36m$dns_fallback\033[0m"
|
||||
echo -e "解析DNS：\033[33m$dns_resolver\033[0m"
|
||||
echo -e "多个DNS地址请用\033[30;47m“|”\033[0m或者\033[30;47m“, ”\033[0m分隔输入"
|
||||
echo -e "\033[33m必须拥有本地根证书文件才能使用dot/doh类型的加密dns\033[0m"
|
||||
echo -e "\033[31m注意singbox内核只有首个dns会被加载！\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 修改\033[32m基础DNS\033[0m"
|
||||
echo -e " 2 修改\033[36mPROXY-DNS\033[0m(该DNS查询会经过节点)"
|
||||
echo -e " 3 修改\033[33m解析DNS\033[0m(必须是IP,用于解析其他DNS)"
|
||||
echo -e " 4 DNS防泄漏： \033[36m$dns_protect\033[0m ———启用时少量网站可能连接卡顿"
|
||||
echo -e " 5 hosts优化： \033[36m$hosts_opt\033[0m ———调用本机hosts并劫持NTP服务"
|
||||
#echo -e " 6 Dnsmasq转发：\033[36m$dns_redir\033[0m ———不推荐使用"
|
||||
echo -e " 7 禁用DNS劫持：\033[36m$dns_no\033[0m ———搭配第三方DNS使用"
|
||||
echo -e " 8 一键配置\033[32m加密DNS\033[0m"
|
||||
echo -e " 9 \033[33m重置\033[0m默认DNS配置"
|
||||
echo -e " 0 返回上级菜单"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
read -p "请输入新的DNS > " dns_nameserver
|
||||
dns_nameserver=$(echo $dns_nameserver | sed 's#|#\,\ #g')
|
||||
if [ -n "$dns_nameserver" ]; then
|
||||
setconfig dns_nameserver "'$dns_nameserver'"
|
||||
echo -e "\033[32m设置成功！！！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_dns_adv
|
||||
;;
|
||||
2)
|
||||
read -p "请输入新的DNS > " dns_fallback
|
||||
dns_fallback=$(echo $dns_fallback | sed 's/|/\,\ /g')
|
||||
if [ -n "$dns_fallback" ]; then
|
||||
setconfig dns_fallback "'$dns_fallback'"
|
||||
echo -e "\033[32m设置成功！！！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_dns_adv
|
||||
;;
|
||||
3)
|
||||
read -p "请输入新的DNS > " text
|
||||
if echo "$text" | grep -qE '://.*::'; then
|
||||
echo -e "\033[31m此选项暂不支持ipv6加密DNS！！！\033[0m"
|
||||
elif [ -n "$text" ]; then
|
||||
dns_resolver=$(echo $text | sed 's/|/\,\ /g')
|
||||
setconfig dns_resolver "'$dns_resolver'"
|
||||
echo -e "\033[32m设置成功！！！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_dns_adv
|
||||
;;
|
||||
4)
|
||||
[ "$dns_protect" = "ON" ] && dns_protect=OFF || dns_protect=ON
|
||||
setconfig dns_protect $dns_protect
|
||||
set_dns_adv
|
||||
;;
|
||||
5)
|
||||
echo "-----------------------------------------------"
|
||||
if [ "$hosts_opt" = "已启用" ]; then
|
||||
hosts_opt=未启用
|
||||
echo -e "\033[32m已禁用hosts优化功能！！！\033[0m"
|
||||
else
|
||||
hosts_opt=已启用
|
||||
echo -e "\033[33m已启用hosts优化功能！！！\033[0m"
|
||||
fi
|
||||
setconfig hosts_opt $hosts_opt
|
||||
sleep 1
|
||||
set_dns_adv
|
||||
;;
|
||||
6)
|
||||
echo "-----------------------------------------------"
|
||||
if [ "$dns_redir" = "未开启" ]; then
|
||||
echo -e "\033[31m将使用OpenWrt中Dnsmasq插件自带的DNS转发功能转发DNS请求至内核！\033[0m"
|
||||
echo -e "\033[33m启用后将禁用本插件自带的iptables转发功能\033[0m"
|
||||
dns_redir=已开启
|
||||
echo -e "\033[32m已启用Dnsmasq转发DNS功能！！！\033[0m"
|
||||
else
|
||||
uci del dhcp.@dnsmasq[-1].server
|
||||
uci set dhcp.@dnsmasq[0].noresolv=0
|
||||
uci commit dhcp
|
||||
/etc/init.d/dnsmasq restart
|
||||
echo -e "\033[33m禁用成功！！如有报错请重启设备！\033[0m"
|
||||
dns_redir=未开启
|
||||
fi
|
||||
setconfig dns_redir $dns_redir
|
||||
sleep 1
|
||||
set_dns_adv
|
||||
;;
|
||||
7)
|
||||
echo "-----------------------------------------------"
|
||||
if [ "$dns_no" = "未禁用" ]; then
|
||||
echo -e "\033[31m仅限搭配其他DNS服务(比如dnsmasq、smartDNS)时使用！\033[0m"
|
||||
dns_no=已禁用
|
||||
echo -e "\033[32m已禁用DNS劫持！！！\033[0m"
|
||||
else
|
||||
dns_no=未禁用
|
||||
echo -e "\033[33m已启用DNS劫持！！！\033[0m"
|
||||
fi
|
||||
setconfig dns_no $dns_no
|
||||
sleep 1
|
||||
set_dns_adv
|
||||
;;
|
||||
8)
|
||||
echo "-----------------------------------------------"
|
||||
openssldir="$(openssl version -d 2>&1 | awk -F '"' '{print $2}')"
|
||||
if [ -s "$openssldir/certs/ca-certificates.crt" ] || [ -s "/etc/ssl/certs/ca-certificates.crt" ] ||
|
||||
echo "$crashcore" | grep -qE 'meta|singbox'; then
|
||||
dns_nameserver='https://dns.alidns.com/dns-query, https://doh.pub/dns-query'
|
||||
dns_fallback='https://cloudflare-dns.com/dns-query, https://dns.google/dns-query, https://doh.opendns.com/dns-query'
|
||||
dns_resolver='https://223.5.5.5/dns-query, 2400:3200::1'
|
||||
setconfig dns_nameserver "'$dns_nameserver'"
|
||||
setconfig dns_fallback "'$dns_fallback'"
|
||||
setconfig dns_resolver "'$dns_resolver'"
|
||||
echo -e "\033[32m已设置加密DNS，如出现DNS解析问题，请尝试重置DNS配置！\033[0m"
|
||||
else
|
||||
echo -e "\033[31m找不到根证书文件，无法启用加密DNS，Linux系统请自行搜索安装OpenSSL的方式！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_dns_adv
|
||||
;;
|
||||
9)
|
||||
dns_nameserver=
|
||||
dns_fallback=
|
||||
dns_resolver=
|
||||
setconfig dns_nameserver
|
||||
setconfig dns_fallback
|
||||
setconfig dns_resolver
|
||||
echo -e "\033[33mDNS配置已重置！！！\033[0m"
|
||||
sleep 1
|
||||
set_dns_adv
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
sleep 1
|
||||
;;
|
||||
esac
|
||||
}
|
||||
@@ -1,17 +1,14 @@
|
||||
#!/bin/sh
|
||||
# Copyright (C) Juewuy
|
||||
|
||||
CFG="$CRASHDIR"/configs/gateway.cfg
|
||||
touch "$CFG"
|
||||
. "$CFG"
|
||||
. "$GT_CFG_PATH"
|
||||
|
||||
gateway(){ #访问与控制主菜单
|
||||
echo -----------------------------------------------
|
||||
echo -e "\033[30;47m欢迎使用访问与控制菜单：\033[0m"
|
||||
echo -----------------------------------------------
|
||||
echo -e " 1 配置公网访问防火墙"
|
||||
echo -e " 2 配置Telegram专属控制机器人 \033[32m$bot_tg_service\033[0m"
|
||||
echo -e " 3 配置DDNS自动域名"
|
||||
echo -e " 1 配置\033[33m公网访问防火墙\033[0m"
|
||||
echo -e " 2 配置\033[36mTelegram专属控制机器人\033[0m \033[32m$bot_tg_service\033[0m"
|
||||
echo -e " 3 配置\033[36mDDNS自动域名\033[0m"
|
||||
[ "$disoverride" != "1" ] && {
|
||||
echo -e " 4 自定义\033[33m公网Vmess入站\033[0m节点 \033[32m$vms_service\033[0m"
|
||||
echo -e " 5 自定义\033[33m公网ShadowSocks入站\033[0m节点 \033[32m$sss_service\033[0m"
|
||||
@@ -32,7 +29,7 @@ gateway(){ #访问与控制主菜单
|
||||
gateway
|
||||
;;
|
||||
3)
|
||||
set_ddns
|
||||
. "$CRASHDIR"/menus/ddns.sh && ddns_menu
|
||||
gateway
|
||||
;;
|
||||
4)
|
||||
@@ -193,9 +190,6 @@ set_bot_tg(){
|
||||
;;
|
||||
esac
|
||||
}
|
||||
set_ddns(){
|
||||
echo 等待施工
|
||||
}
|
||||
set_vmess(){
|
||||
echo -----------------------------------------------
|
||||
echo -e "\033[31m注意：\033[0m启动内核服务后会自动开放相应端口公网访问，请谨慎使用！\n 脚本只提供基础功能，更多需求请使用自定义配置文件功能！"
|
||||
@@ -224,7 +218,8 @@ set_vmess(){
|
||||
2)
|
||||
read -p "请输入端口号(输入0删除) > " text
|
||||
[ "$text" = 0 ] && unset vms_port
|
||||
if sh "$CRASHDIR"/menus/check_port.sh "$text"; then
|
||||
. "$CRASHDIR"/menus/check_port.sh
|
||||
if check_port "$text"; then
|
||||
vms_port="$text"
|
||||
setconfig vms_port "$text" "$CFG"
|
||||
else
|
||||
@@ -293,7 +288,8 @@ set_shadowsocks(){
|
||||
2)
|
||||
read -p "请输入端口号(输入0删除) > " text
|
||||
[ "$text" = 0 ] && unset sss_port
|
||||
if sh "$CRASHDIR"/menus/check_port.sh "$text"; then
|
||||
. "$CRASHDIR"/menus/check_port.sh
|
||||
if check_port "$text"; then
|
||||
sss_port="$text"
|
||||
setconfig sss_port "$text" "$CFG"
|
||||
else
|
||||
|
||||
@@ -1,422 +0,0 @@
|
||||
#!/bin/sh
|
||||
# Copyright (C) Juewuy
|
||||
|
||||
normal_set() { #基础设置
|
||||
#获取设置默认显示
|
||||
[ -z "$skip_cert" ] && skip_cert=已开启
|
||||
[ -z "$common_ports" ] && common_ports=已开启
|
||||
[ -z "$dns_mod" ] && dns_mod=fake-ip
|
||||
[ -z "$dns_over" ] && dns_over=已开启
|
||||
[ -z "$cn_ip_route" ] && cn_ip_route=未开启
|
||||
[ -z "$local_proxy" ] && local_proxy=未开启
|
||||
[ -z "$quic_rj" ] && quic_rj=未开启
|
||||
[ -z "$(cat ${CRASHDIR}/configs/mac ${CRASHDIR}/configs/ip_filter 2>/dev/null)" ] && mac_return=未开启 || mac_return=已启用
|
||||
#
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[30;47m欢迎使用功能设置菜单：\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 切换防火墙运行模式: \033[36m$redir_mod\033[0m"
|
||||
[ "$disoverride" != "1" ] && {
|
||||
echo -e " 2 切换DNS运行模式： \033[36m$dns_mod\033[0m"
|
||||
echo -e " 3 跳过本地证书验证： \033[36m$skip_cert\033[0m ————解决节点证书验证错误"
|
||||
}
|
||||
echo -e " 4 设置流量过滤"
|
||||
[ "$disoverride" != "1" ] && {
|
||||
[ "$dns_mod" != "redir_host" ] &&
|
||||
echo -e " 9 管理Fake-ip过滤列表"
|
||||
}
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 返回上级菜单 \033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0)
|
||||
;;
|
||||
1)
|
||||
if [ "$USER" != "root" -a "$USER" != "admin" ]; then
|
||||
echo "-----------------------------------------------"
|
||||
read -p "非root用户可能无法正确配置其他模式！依然尝试吗？(1/0) > " res
|
||||
[ "$res" = 1 ] && set_redir_mod
|
||||
else
|
||||
set_redir_mod
|
||||
fi
|
||||
normal_set
|
||||
;;
|
||||
2)
|
||||
set_dns_mod
|
||||
sleep 1
|
||||
normal_set
|
||||
;;
|
||||
4)
|
||||
set_fw_filter
|
||||
sleep 1
|
||||
normal_set
|
||||
;;
|
||||
3)
|
||||
echo "-----------------------------------------------"
|
||||
if [ "$skip_cert" = "未开启" ] >/dev/null 2>&1; then
|
||||
echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
|
||||
skip_cert=已开启
|
||||
else
|
||||
echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
|
||||
skip_cert=未开启
|
||||
fi
|
||||
setconfig skip_cert $skip_cert
|
||||
normal_set
|
||||
;;
|
||||
9)
|
||||
echo "-----------------------------------------------"
|
||||
fake_ip_filter
|
||||
normal_set
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
set_fw_filter(){ #流量过滤
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 过滤非常用端口： \033[36m$common_ports\033[0m ————用于过滤P2P流量"
|
||||
echo -e " 2 过滤局域网设备： \033[36m$mac_return\033[0m ————使用黑/白名单进行过滤"
|
||||
echo -e " 3 过滤QUIC协议: \033[36m$quic_rj\033[0m ————优化视频性能"
|
||||
[ "$dns_mod" != "fake-ip" ] &&
|
||||
echo -e " 4 过滤CN_IP(6)列表: \033[36m$cn_ip_route\033[0m ————优化性能，不兼容Fake-ip"
|
||||
echo -e " 5 自定义透明路由ipv4网段: 适合vlan等复杂网络环境"
|
||||
echo -e " 6 自定义保留地址ipv4网段: 需要以保留地址为访问目标的环境"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 返回上级菜单 \033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0)
|
||||
;;
|
||||
1)
|
||||
set_common_ports() {
|
||||
if [ "$common_ports" = "未开启" ]; then
|
||||
echo -e "\033[33m当前代理端口为：【$multiport】\033[0m"
|
||||
echo -e "\033[31m注意，fake-ip模式下，非常用端口的域名连接将不受影响！！\033[0m"
|
||||
read -p "是否修改默认端口？(1/0) > " res
|
||||
[ "$res" = "1" ] && {
|
||||
read -p "请输入自定义端口,注意用小写逗号分隔 > " text
|
||||
[ -n "$text" ] && setconfig multiport $text && echo -e "\033[33m已设为代理【$multiport】端口！！\033[0m"
|
||||
}
|
||||
common_ports=已开启
|
||||
sleep 1
|
||||
else
|
||||
echo -e "\033[33m已设为代理全部端口！！\033[0m"
|
||||
common_ports=未开启
|
||||
fi
|
||||
setconfig common_ports $common_ports
|
||||
}
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$(pidof CrashCore)" ]; then
|
||||
read -p "切换时将停止服务，是否继续？(1/0) > " res
|
||||
[ "$res" = 1 ] && ${CRASHDIR}/start.sh stop && set_common_ports
|
||||
else
|
||||
set_common_ports
|
||||
fi
|
||||
set_fw_filter
|
||||
;;
|
||||
2)
|
||||
checkcfg_mac=$(cat ${CRASHDIR}/configs/mac)
|
||||
fw_filter_lan
|
||||
if [ -n "$PID" ]; then
|
||||
checkcfg_mac_new=$(cat ${CRASHDIR}/configs/mac)
|
||||
[ "$checkcfg_mac" != "$checkcfg_mac_new" ] && checkrestart
|
||||
fi
|
||||
set_fw_filter
|
||||
;;
|
||||
3)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$(echo "$redir_mod" | grep -oE '混合|Tproxy|Tun')" ]; then
|
||||
if [ "$quic_rj" = "未开启" ]; then
|
||||
echo -e "\033[33m已禁止QUIC流量通过ShellCrash内核！！\033[0m"
|
||||
quic_rj=已启用
|
||||
else
|
||||
echo -e "\033[33m已取消禁止QUIC协议流量！！\033[0m"
|
||||
quic_rj=未开启
|
||||
fi
|
||||
setconfig quic_rj $quic_rj
|
||||
else
|
||||
echo -e "\033[33m当前模式默认不会代理UDP流量，无需设置！！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_fw_filter
|
||||
;;
|
||||
4)
|
||||
if [ -n "$(ipset -v 2>/dev/null)" ] || [ "$firewall_mod" = 'nftables' ]; then
|
||||
if [ "$cn_ip_route" = "未开启" ]; then
|
||||
echo -e "\033[32m已开启CN_IP绕过内核功能！！\033[0m"
|
||||
echo -e "\033[31m注意！！！此功能会导致全局模式及一切CN相关规则失效！！！\033[0m"
|
||||
cn_ip_route=已开启
|
||||
sleep 2
|
||||
else
|
||||
echo -e "\033[33m已禁用CN_IP绕过内核功能！！\033[0m"
|
||||
cn_ip_route=未开启
|
||||
fi
|
||||
setconfig cn_ip_route $cn_ip_route
|
||||
else
|
||||
echo -e "\033[31m当前设备缺少ipset模块或未使用nftables模式，无法启用绕过功能！！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
set_fw_filter
|
||||
;;
|
||||
5)
|
||||
set_cust_host_ipv4
|
||||
set_fw_filter
|
||||
;;
|
||||
6)
|
||||
[ -z "$reserve_ipv4" ] && reserve_ipv4="0.0.0.0/8 10.0.0.0/8 127.0.0.0/8 100.64.0.0/10 169.254.0.0/16 172.16.0.0/12 192.168.0.0/16 224.0.0.0/4 240.0.0.0/4"
|
||||
echo -e "当前网段：\033[36m$reserve_ipv4\033[0m"
|
||||
echo -e "\033[33m地址必须是空格分隔，错误的设置可能导致网络回环或启动报错，请务必谨慎！\033[0m"
|
||||
read -p "请输入 > " text
|
||||
if [ -n "$(
|
||||
echo $text | grep -E "(((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])/(3[0-2]|[1-2]?[0-9]))( +|$)+"
|
||||
)" ]; then
|
||||
reserve_ipv4="$text"
|
||||
echo -e "已将保留地址网段设为：\033[32m$reserve_ipv4\033[0m"
|
||||
setconfig reserve_ipv4 "'$reserve_ipv4'"
|
||||
else
|
||||
echo -e "\033[31m输入有误，操作已取消！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_fw_filter
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
set_cust_host_ipv4() {
|
||||
[ -z "$replace_default_host_ipv4" ] && replace_default_host_ipv4="未启用"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "当前默认透明路由的网段为: \033[32m$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep 'br' | grep -v 'iot' | grep -E ' 1(92|0|72)\.' | sed 's/.*inet.//g' | sed 's/br.*$//g' | sed 's/metric.*$//g' | tr '\n' ' ' && echo) \033[0m"
|
||||
echo -e "当前已添加的自定义网段为:\033[36m$cust_host_ipv4\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 移除所有自定义网段"
|
||||
echo -e " 2 使用自定义网段覆盖默认网段 \033[36m$replace_default_host_ipv4\033[0m"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请输入对应的序号或需要额外添加的网段 > " text
|
||||
case "$text" in
|
||||
2)
|
||||
if [ "$replace_default_host_ipv4" == "未启用" ]; then
|
||||
replace_default_host_ipv4="已启用"
|
||||
else
|
||||
replace_default_host_ipv4="未启用"
|
||||
fi
|
||||
setconfig replace_default_host_ipv4 "$replace_default_host_ipv4"
|
||||
set_cust_host_ipv4
|
||||
;;
|
||||
1)
|
||||
unset cust_host_ipv4
|
||||
setconfig cust_host_ipv4
|
||||
set_cust_host_ipv4
|
||||
;;
|
||||
0) ;;
|
||||
*)
|
||||
if [ -n "$(echo $text | grep -Eo '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]{1,2}'$)" -a -z "$(echo $cust_host_ipv4 | grep "$text")" ]; then
|
||||
cust_host_ipv4="$cust_host_ipv4 $text"
|
||||
setconfig cust_host_ipv4 "'$cust_host_ipv4'"
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m请输入正确的网段地址！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_cust_host_ipv4
|
||||
;;
|
||||
esac
|
||||
}
|
||||
fw_filter_lan() { #局域网设备过滤
|
||||
get_devinfo() {
|
||||
dev_ip=$(cat $dhcpdir | grep " $dev " | awk '{print $3}') && [ -z "$dev_ip" ] && dev_ip=$dev
|
||||
dev_mac=$(cat $dhcpdir | grep " $dev " | awk '{print $2}') && [ -z "$dev_mac" ] && dev_mac=$dev
|
||||
dev_name=$(cat $dhcpdir | grep " $dev " | awk '{print $4}') && [ -z "$dev_name" ] && dev_name='未知设备'
|
||||
}
|
||||
add_mac() {
|
||||
echo "-----------------------------------------------"
|
||||
echo 已添加的mac地址：
|
||||
cat ${CRASHDIR}/configs/mac 2>/dev/null
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m序号 设备IP 设备mac地址 设备名称\033[32m"
|
||||
cat $dhcpdir | awk '{print " "NR" "$3,$2,$4}'
|
||||
echo -e "\033[0m-----------------------------------------------"
|
||||
echo -e "手动输入mac地址时仅支持\033[32mxx:xx:xx:xx:xx:xx\033[0m的形式"
|
||||
echo -e " 0 或回车 结束添加"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应序号或直接输入mac地址 > " num
|
||||
if [ -z "$num" -o "$num" = 0 ]; then
|
||||
i=
|
||||
elif [ -n "$(echo $num | grep -aE '^([0-9A-Fa-f]{2}[:]){5}([0-9A-Fa-f]{2})$')" ]; then
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/mac | grep -E "$num")" ]; then
|
||||
echo $num | grep -oE '^([0-9A-Fa-f]{2}[:]){5}([0-9A-Fa-f]{2})$' >>${CRASHDIR}/configs/mac
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
|
||||
fi
|
||||
add_mac
|
||||
elif [ $num -le $(cat $dhcpdir 2>/dev/null | awk 'END{print NR}') ]; then
|
||||
macadd=$(cat $dhcpdir | awk '{print $2}' | sed -n "$num"p)
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/mac | grep -E "$macadd")" ]; then
|
||||
echo $macadd >>${CRASHDIR}/configs/mac
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
|
||||
fi
|
||||
add_mac
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m输入有误，请重新输入！\033[0m"
|
||||
add_mac
|
||||
fi
|
||||
}
|
||||
add_ip() {
|
||||
echo "-----------------------------------------------"
|
||||
echo "已添加的IP地址(段)："
|
||||
cat ${CRASHDIR}/configs/ip_filter 2>/dev/null
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m序号 设备IP 设备名称\033[32m"
|
||||
cat $dhcpdir | awk '{print " "NR" "$3,$4}'
|
||||
echo -e "\033[0m-----------------------------------------------"
|
||||
echo -e "手动输入时仅支持\033[32m 192.168.1.0/24\033[0m 或 \033[32m192.168.1.0\033[0m 的形式"
|
||||
echo -e "不支持ipv6地址过滤，如有需求请使用mac地址过滤"
|
||||
echo -e " 0 或回车 结束添加"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应序号或直接输入IP地址段 > " num
|
||||
if [ -z "$num" -o "$num" = 0 ]; then
|
||||
i=
|
||||
elif [ -n "$(echo $num | grep -aE '^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)(/(3[0-2]|[12]?[0-9]))?$')" ]; then
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/ip_filter | grep -E "$num")" ]; then
|
||||
echo $num | grep -oE '^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)(/(3[0-2]|[12]?[0-9]))?$' >>${CRASHDIR}/configs/ip_filter
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m已添加的地址，请勿重复添加！\033[0m"
|
||||
fi
|
||||
add_ip
|
||||
elif [ $num -le $(cat $dhcpdir 2>/dev/null | awk 'END{print NR}') ]; then
|
||||
ipadd=$(cat $dhcpdir | awk '{print $3}' | sed -n "$num"p)
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/mac | grep -E "$ipadd")" ]; then
|
||||
echo $ipadd >>${CRASHDIR}/configs/ip_filter
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m已添加的地址，请勿重复添加！\033[0m"
|
||||
fi
|
||||
add_ip
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m输入有误，请重新输入！\033[0m"
|
||||
add_ip
|
||||
fi
|
||||
}
|
||||
del_all() {
|
||||
echo "-----------------------------------------------"
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/mac ${CRASHDIR}/configs/ip_filter 2>/dev/null)" ]; then
|
||||
echo -e "\033[31m列表中没有需要移除的设备！\033[0m"
|
||||
sleep 1
|
||||
else
|
||||
echo -e "请选择需要移除的设备：\033[36m"
|
||||
echo -e "\033[33m 设备IP 设备mac地址 设备名称\033[0m"
|
||||
i=1
|
||||
for dev in $(cat ${CRASHDIR}/configs/mac ${CRASHDIR}/configs/ip_filter 2>/dev/null); do
|
||||
get_devinfo
|
||||
echo -e " $i \033[32m$dev_ip \033[36m$dev_mac \033[32m$dev_name\033[0m"
|
||||
i=$((i + 1))
|
||||
done
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[0m 0 或回车 结束删除"
|
||||
read -p "请输入需要移除的设备的对应序号 > " num
|
||||
mac_filter_rows=$(cat ${CRASHDIR}/configs/mac 2>/dev/null | wc -l)
|
||||
ip_filter_rows=$(cat ${CRASHDIR}/configs/ip_filter 2>/dev/null | wc -l)
|
||||
if [ -z "$num" ] || [ "$num" -le 0 ]; then
|
||||
n=
|
||||
elif [ $num -le $mac_filter_rows ]; then
|
||||
sed -i "${num}d" ${CRASHDIR}/configs/mac
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m对应设备已移除！\033[0m"
|
||||
del_all
|
||||
elif [ $num -le $((mac_filter_rows + ip_filter_rows)) ]; then
|
||||
num=$((num - mac_filter_rows))
|
||||
sed -i "${num}d" ${CRASHDIR}/configs/ip_filter
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m对应设备已移除！\033[0m"
|
||||
del_all
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m输入有误，请重新输入！\033[0m"
|
||||
del_all
|
||||
fi
|
||||
fi
|
||||
}
|
||||
echo "-----------------------------------------------"
|
||||
[ -z "$dhcpdir" ] && [ -f /var/lib/dhcp/dhcpd.leases ] && dhcpdir='/var/lib/dhcp/dhcpd.leases'
|
||||
[ -z "$dhcpdir" ] && [ -f /var/lib/dhcpd/dhcpd.leases ] && dhcpdir='/var/lib/dhcpd/dhcpd.leases'
|
||||
[ -z "$dhcpdir" ] && [ -f /tmp/dhcp.leases ] && dhcpdir='/tmp/dhcp.leases'
|
||||
[ -z "$dhcpdir" ] && [ -f /tmp/dnsmasq.leases ] && dhcpdir='/tmp/dnsmasq.leases'
|
||||
[ -z "$dhcpdir" ] && dhcpdir='/dev/null'
|
||||
[ -z "$fw_filter_lan_type" ] && fw_filter_lan_type='黑名单'
|
||||
if [ "$fw_filter_lan_type" = "黑名单" ]; then
|
||||
fw_filter_lan_over='白名单'
|
||||
fw_filter_lan_scrip='不'
|
||||
else
|
||||
fw_filter_lan_over='黑名单'
|
||||
fw_filter_lan_scrip=''
|
||||
fi
|
||||
######
|
||||
echo -e "\033[30;47m请在此添加或移除设备\033[0m"
|
||||
echo -e "当前过滤方式为：\033[33m$fw_filter_lan_type模式\033[0m"
|
||||
echo -e "仅列表内设备流量\033[36m$fw_filter_lan_scrip经过\033[0m内核"
|
||||
if [ -n "$(cat ${CRASHDIR}/configs/mac)" ]; then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "当前已过滤设备为：\033[36m"
|
||||
echo -e "\033[33m 设备mac/ip地址 设备名称\033[0m"
|
||||
for dev in $(cat ${CRASHDIR}/configs/mac 2>/dev/null); do
|
||||
get_devinfo
|
||||
echo -e "\033[36m$dev_mac \033[0m$dev_name"
|
||||
done
|
||||
for dev in $(cat ${CRASHDIR}/configs/ip_filter 2>/dev/null); do
|
||||
get_devinfo
|
||||
echo -e "\033[32m$dev_ip \033[0m$dev_name"
|
||||
done
|
||||
echo "-----------------------------------------------"
|
||||
fi
|
||||
echo -e " 1 切换为\033[33m$fw_filter_lan_over模式\033[0m"
|
||||
echo -e " 2 \033[32m添加指定设备(mac地址)\033[0m"
|
||||
echo -e " 3 \033[32m添加指定设备(IP地址/网段)\033[0m"
|
||||
echo -e " 4 \033[36m移除指定设备\033[0m"
|
||||
echo -e " 9 \033[31m清空整个列表\033[0m"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
fw_filter_lan_type=$fw_filter_lan_over
|
||||
setconfig fw_filter_lan_type $fw_filter_lan_type
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m已切换为$fw_filter_lan_type模式！\033[0m"
|
||||
fw_filter_lan
|
||||
;;
|
||||
2)
|
||||
add_mac
|
||||
fw_filter_lan
|
||||
;;
|
||||
3)
|
||||
add_ip
|
||||
fw_filter_lan
|
||||
;;
|
||||
4)
|
||||
del_all
|
||||
fw_filter_lan
|
||||
;;
|
||||
9)
|
||||
: >${CRASHDIR}/configs/mac
|
||||
: >${CRASHDIR}/configs/ip_filter
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m设备列表已清空！\033[0m"
|
||||
fw_filter_lan
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
178
scripts/menus/setboot.sh
Normal file
178
scripts/menus/setboot.sh
Normal file
@@ -0,0 +1,178 @@
|
||||
#!/bin/sh
|
||||
# Copyright (C) Juewuy
|
||||
|
||||
setboot() { #启动设置菜单
|
||||
[ -z "$start_old" ] && start_old=未开启
|
||||
[ -z "$start_delay" -o "$start_delay" = 0 ] && delay=未设置 || delay=${start_delay}秒
|
||||
[ "$autostart" = "enable" ] && auto_set="\033[33m禁止" || auto_set="\033[32m允许"
|
||||
[ "${BINDIR}" = "${CRASHDIR}" ] && mini_clash=未开启 || mini_clash=已开启
|
||||
[ -z "$network_check" ] && network_check=已开启
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[30;47m欢迎使用启动设置菜单：\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 ${auto_set}\033[0mShellCrash开机启动"
|
||||
echo -e " 2 使用保守模式: \033[36m$start_old\033[0m ————基于定时任务(每分钟检测)"
|
||||
echo -e " 3 设置自启延时: \033[36m$delay\033[0m ————用于解决自启后服务受限"
|
||||
echo -e " 4 启用小闪存模式: \033[36m$mini_clash\033[0m ————用于闪存空间不足的设备"
|
||||
[ "${BINDIR}" != "${CRASHDIR}" ] && echo -e " 5 设置小闪存目录: \033[36m${BINDIR}\033[0m"
|
||||
echo -e " 6 自启网络检查: \033[36m$network_check\033[0m ————禁用则跳过自启时网络检查"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 \033[0m返回上级菜单\033[0m"
|
||||
read -p "请输入对应数字 > " num
|
||||
echo "-----------------------------------------------"
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
if [ "$autostart" = "enable" ]; then
|
||||
# 禁止自启动：删除各系统的启动项
|
||||
[ -d /etc/rc.d ] && cd /etc/rc.d && rm -rf *shellcrash >/dev/null 2>&1 && cd - >/dev/null
|
||||
ckcmd systemctl && systemctl disable shellcrash.service >/dev/null 2>&1
|
||||
grep -q 's6' /proc/1/comm && rm -rf /etc/s6-overlay/s6-rc.d/user/contents.d/afstart
|
||||
rc-status -r >/dev/null 2>&1 && rc-update del shellcrash default >/dev/null 2>&1
|
||||
touch ${CRASHDIR}/.dis_startup
|
||||
autostart=disable
|
||||
echo -e "\033[33m已禁止ShellCrash开机启动！\033[0m"
|
||||
elif [ "$autostart" = "disable" ]; then
|
||||
# 允许自启动：配置各系统的启动项
|
||||
[ -f /etc/rc.common -a "$(cat /proc/1/comm)" = "procd" ] && /etc/init.d/shellcrash enable
|
||||
ckcmd systemctl && systemctl enable shellcrash.service >/dev/null 2>&1
|
||||
grep -q 's6' /proc/1/comm && touch /etc/s6-overlay/s6-rc.d/user/contents.d/afstart
|
||||
rc-status -r >/dev/null 2>&1 && rc-update add shellcrash default >/dev/null 2>&1
|
||||
rm -rf ${CRASHDIR}/.dis_startup
|
||||
autostart=enable
|
||||
echo -e "\033[32m已设置ShellCrash开机启动！\033[0m"
|
||||
fi
|
||||
setboot
|
||||
;;
|
||||
2)
|
||||
if [ "$start_old" = "未开启" ] >/dev/null 2>&1; then
|
||||
echo -e "\033[33m改为使用保守模式启动服务！！\033[0m"
|
||||
[ -d /etc/rc.d ] && cd /etc/rc.d && rm -rf *shellcrash >/dev/null 2>&1 && cd - >/dev/null
|
||||
ckcmd systemctl && systemctl disable shellcrash.service >/dev/null 2>&1
|
||||
grep -q 's6' /proc/1/comm && rm -rf /etc/s6-overlay/s6-rc.d/user/contents.d/afstart
|
||||
rc-status -r >/dev/null 2>&1 && rc-update del shellcrash default >/dev/null 2>&1
|
||||
start_old=已开启
|
||||
setconfig start_old $start_old
|
||||
${CRASHDIR}/start.sh stop
|
||||
else
|
||||
if grep -qE 'procd|systemd|s6' /proc/1/comm || rc-status -r >/dev/null 2>&1; then
|
||||
echo -e "\033[32m改为使用系统守护进程启动服务！！\033[0m"
|
||||
${CRASHDIR}/start.sh cronset "ShellCrash初始化"
|
||||
start_old=未开启
|
||||
setconfig start_old $start_old
|
||||
${CRASHDIR}/start.sh stop
|
||||
|
||||
else
|
||||
echo -e "\033[31m当前设备不支持以其他模式启动！！\033[0m"
|
||||
fi
|
||||
fi
|
||||
sleep 1
|
||||
setboot
|
||||
;;
|
||||
3)
|
||||
echo -e "\033[33m如果你的设备启动后可以正常使用，则无需设置！！\033[0m"
|
||||
echo -e "\033[36m推荐设置为30~120秒之间，请根据设备问题自行试验\033[0m"
|
||||
read -p "请输入启动延迟时间(0~300秒) > " sec
|
||||
case "$sec" in
|
||||
[0-9] | [0-9][0-9] | [0-2][0-9][0-9] | 300)
|
||||
start_delay=$sec
|
||||
setconfig start_delay $sec
|
||||
echo -e "\033[32m设置成功！\033[0m"
|
||||
;;
|
||||
*)
|
||||
echo -e "\033[31m输入有误，或超过300秒，请重新输入！\033[0m"
|
||||
;;
|
||||
esac
|
||||
sleep 1
|
||||
setboot
|
||||
;;
|
||||
4)
|
||||
dir_size=$(df ${CRASHDIR} | awk '{ for(i=1;i<=NF;i++){ if(NR==1){ arr[i]=$i; }else{ arr[i]=arr[i]" "$i; } } } END{ for(i=1;i<=NF;i++){ print arr[i]; } }' | grep Ava | awk '{print $2}')
|
||||
if [ "$mini_clash" = "未开启" ]; then
|
||||
if [ "$dir_size" -gt 20480 ]; then
|
||||
echo -e "\033[33m您的设备空间充足(>20M)，无需开启！\033[0m"
|
||||
elif [ "$start_old" != '已开启' -a "$(cat /proc/1/comm)" = "systemd" ]; then
|
||||
echo -e "\033[33m不支持systemd启动模式，请先启用保守模式！\033[0m"
|
||||
else
|
||||
[ "$BINDIR" = "$CRASHDIR" ] && BINDIR="$TMPDIR"
|
||||
echo -e "\033[32m已经启用小闪存功能！\033[0m"
|
||||
echo -e "如需更换目录，请使用【设置小闪存目录】功能\033[0m"
|
||||
fi
|
||||
else
|
||||
if [ "$dir_size" -lt 8192 ]; then
|
||||
echo -e "\033[31m您的设备剩余空间不足8M，停用后可能无法正常运行！\033[0m"
|
||||
read -p "确认停用此功能？(1/0) > " res
|
||||
[ "$res" = 1 ] && BINDIR="$CRASHDIR" && echo -e "\033[33m已经停用小闪存功能！\033[0m"
|
||||
else
|
||||
rm -rf /tmp/ShellCrash
|
||||
BINDIR="$CRASHDIR"
|
||||
echo -e "\033[33m已经停用小闪存功能！\033[0m"
|
||||
fi
|
||||
fi
|
||||
setconfig BINDIR ${BINDIR} ${CRASHDIR}/configs/command.env
|
||||
sleep 1
|
||||
setboot
|
||||
;;
|
||||
5)
|
||||
echo -e "\033[33m如设置到内存，则每次开机后都自动重新下载相关文件\033[0m"
|
||||
echo -e "\033[33m请确保安装源可用裸连，否则会导致启动失败\033[0m"
|
||||
echo " 1 使用内存(/tmp)"
|
||||
echo " 2 选择U盘目录"
|
||||
echo " 3 自定义目录"
|
||||
read -p "请输入相应数字 > " num
|
||||
case "$num" in
|
||||
1)
|
||||
BINDIR="$TMPDIR"
|
||||
;;
|
||||
2)
|
||||
set_usb_dir() {
|
||||
echo "请选择安装目录"
|
||||
du -hL /mnt | awk '{print " "NR" "$2" "$1}'
|
||||
read -p "请输入相应数字 > " num
|
||||
BINDIR=$(du -hL /mnt | awk '{print $2}' | sed -n "$num"p)
|
||||
if [ -z "$BINDIR" ]; then
|
||||
echo "\033[31m输入错误！请重新设置！\033[0m"
|
||||
set_usb_dir
|
||||
fi
|
||||
}
|
||||
set_usb_dir
|
||||
;;
|
||||
3)
|
||||
input_dir() {
|
||||
read -p "请输入自定义目录 > " BINDIR
|
||||
if [ ! -d "$BINDIR" ]; then
|
||||
echo "\033[31m输入错误！请重新设置！\033[0m"
|
||||
input_dir
|
||||
fi
|
||||
}
|
||||
input_dir
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
setconfig BINDIR ${BINDIR} ${CRASHDIR}/configs/command.env
|
||||
setboot
|
||||
;;
|
||||
6)
|
||||
echo -e "\033[33m如果你的设备启动后可以正常使用，则无需变更设置！！\033[0m"
|
||||
echo -e "\033[36m禁用时，如果使用了小闪存模式或者rule-set等在线规则，则可能会因无法联网而导致启动失败！\033[0m"
|
||||
echo -e "\033[32m启用时，会导致部分性能较差或者拨号较慢的设备可能会因查询超时导致启动失败！\033[0m"
|
||||
read -p "是否切换？(1/0) > " res
|
||||
[ "$res" = '1' ] && {
|
||||
if [ "$network_check" = "已禁用" ]; then
|
||||
network_check=已启用
|
||||
else
|
||||
network_check=已禁用
|
||||
fi
|
||||
setconfig network_check $network_check
|
||||
}
|
||||
sleep 1
|
||||
setboot
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
|
||||
}
|
||||
971
scripts/menus/settings.sh
Normal file
971
scripts/menus/settings.sh
Normal file
@@ -0,0 +1,971 @@
|
||||
#!/bin/sh
|
||||
# Copyright (C) Juewuy
|
||||
|
||||
settings() { #功能设置
|
||||
#获取设置默认显示
|
||||
[ -z "$skip_cert" ] && skip_cert=已开启
|
||||
[ -z "$sniffer" ] && sniffer=未启用
|
||||
#
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[30;47m欢迎使用功能设置菜单：\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 设置代理模式: \033[36m$redir_mod\033[0m"
|
||||
echo -e " 2 设置DNS模式： \033[36m$dns_mod\033[0m"
|
||||
echo -e " 3 设置各类流量过滤"
|
||||
[ "$disoverride" != "1" ] && {
|
||||
echo -e " 4 跳过证书验证： \033[36m$skip_cert\033[0m"
|
||||
echo -e " 5 启用域名嗅探: \033[36m$sniffer\033[0m"
|
||||
echo -e " 6 自定义\033[32m端口及秘钥\033[0m"
|
||||
}
|
||||
echo -e " 8 ipv6设置： \033[36m$ipv6_redir\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 9 \033[31m重置/备份/还原\033[0m脚本设置"
|
||||
echo -e " 0 返回上级菜单 \033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0)
|
||||
;;
|
||||
1)
|
||||
if [ "$USER" != "root" -a "$USER" != "admin" ]; then
|
||||
echo "-----------------------------------------------"
|
||||
read -p "非root用户可能无法正确配置其他模式！依然尝试吗？(1/0) > " res
|
||||
[ "$res" = 1 ] && set_redir_mod
|
||||
else
|
||||
set_redir_mod
|
||||
fi
|
||||
sleep 1
|
||||
settings
|
||||
;;
|
||||
2)
|
||||
set_dns_mod
|
||||
sleep 1
|
||||
settings
|
||||
;;
|
||||
3)
|
||||
set_fw_filter
|
||||
sleep 1
|
||||
settings
|
||||
;;
|
||||
4)
|
||||
echo "-----------------------------------------------"
|
||||
if [ "$skip_cert" = "未开启" ] >/dev/null 2>&1; then
|
||||
echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
|
||||
skip_cert=已开启
|
||||
else
|
||||
echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
|
||||
skip_cert=未开启
|
||||
fi
|
||||
setconfig skip_cert $skip_cert
|
||||
settings
|
||||
;;
|
||||
5)
|
||||
echo "-----------------------------------------------"
|
||||
if [ "$sniffer" = "未启用" ]; then
|
||||
if [ "$crashcore" = "clash" ]; then
|
||||
rm -rf ${TMPDIR}/CrashCore
|
||||
rm -rf ${CRASHDIR}/CrashCore
|
||||
rm -rf ${CRASHDIR}/CrashCore.tar.gz
|
||||
crashcore=meta
|
||||
setconfig crashcore $crashcore
|
||||
echo "已将ShellCrash内核切换为Meta内核！域名嗅探依赖Meta或者高版本clashpre内核！"
|
||||
fi
|
||||
sniffer=已启用
|
||||
elif [ "$crashcore" = "clashpre" -a "$dns_mod" = "redir_host" ]; then
|
||||
echo -e "\033[31m使用clashpre内核且开启redir-host模式时无法关闭！\033[0m"
|
||||
else
|
||||
sniffer=未启用
|
||||
fi
|
||||
setconfig sniffer $sniffer
|
||||
settings
|
||||
;;
|
||||
6)
|
||||
if [ -n "$(pidof CrashCore)" ]; then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m检测到服务正在运行，需要先停止服务！\033[0m"
|
||||
read -p "是否停止服务？(1/0) > " res
|
||||
if [ "$res" = "1" ]; then
|
||||
${CRASHDIR}/start.sh stop
|
||||
set_adv_config
|
||||
fi
|
||||
else
|
||||
set_adv_config
|
||||
fi
|
||||
settings
|
||||
;;
|
||||
8)
|
||||
set_ipv6
|
||||
settings
|
||||
;;
|
||||
9)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 备份脚本设置"
|
||||
echo -e " 2 还原脚本设置"
|
||||
echo -e " 3 重置脚本设置"
|
||||
echo -e " 0 返回上级菜单"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
if [ -z "$num" ]; then
|
||||
errornum
|
||||
elif [ "$num" = 0 ]; then
|
||||
i=
|
||||
elif [ "$num" = 1 ]; then
|
||||
cp -f "$CFG_PATH" "$CFG_PATH".bak
|
||||
echo -e "\033[32m脚本设置已备份！\033[0m"
|
||||
elif [ "$num" = 2 ]; then
|
||||
if [ -f "$CFG_PATH.bak" ]; then
|
||||
mv -f "$CFG_PATH" "$CFG_PATH".bak2
|
||||
mv -f "$CFG_PATH".bak "$CFG_PATH"
|
||||
mv -f "$CFG_PATH".bak2 "$CFG_PATH".bak
|
||||
echo -e "\033[32m脚本设置已还原！(被覆盖的配置已备份！)\033[0m"
|
||||
else
|
||||
echo -e "\033[31m找不到备份文件，请先备份脚本设置！\033[0m"
|
||||
fi
|
||||
elif [ "$num" = 3 ]; then
|
||||
mv -f "$CFG_PATH" "$CFG_PATH".bak
|
||||
. ${CRASHDIR}/init.sh >/dev/null
|
||||
echo -e "\033[32m脚本设置已重置！(旧文件已备份！)\033[0m"
|
||||
fi
|
||||
echo -e "\033[33m请重新启动脚本！\033[0m"
|
||||
exit 0
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
set_redir_mod() { #代理模式设置
|
||||
set_redir_config() {
|
||||
setconfig redir_mod $redir_mod
|
||||
setconfig dns_mod $dns_mod
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m已设为 $redir_mod ！！\033[0m"
|
||||
}
|
||||
[ -n "$(ls /dev/net/tun 2>/dev/null)" ] || ip tuntap >/dev/null 2>&1 && sup_tun=1
|
||||
[ -z "$firewall_area" ] && firewall_area=1
|
||||
[ -z "$redir_mod" ] && [ "$USER" = "root" -o "$USER" = "admin" ] && redir_mod='Redir模式'
|
||||
[ -z "$redir_mod" ] && redir_mod='纯净模式'
|
||||
firewall_area_dsc=$(echo "仅局域网 仅本机 局域网+本机 纯净模式 主-旁转发($bypass_host)" | cut -d' ' -f$firewall_area)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "当前代理模式为：\033[47;30m$redir_mod\033[0m；ShellCrash核心为：\033[47;30m $crashcore \033[0m"
|
||||
echo -e "\033[33m切换模式后需要手动重启服务以生效！\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
[ $firewall_area -le 3 ] && {
|
||||
echo -e " 1 \033[32mRedir模式\033[0m： Redir转发TCP，不转发UDP"
|
||||
echo -e " 2 \033[36m混合模式\033[0m： Redir转发TCP，Tun转发UDP"
|
||||
echo -e " 3 \033[32mTproxy模式\033[0m： Tproxy转发TCP&UDP"
|
||||
echo -e " 4 \033[33mTun模式\033[0m： Tun转发TCP&UDP(占用高不推荐)"
|
||||
echo "-----------------------------------------------"
|
||||
}
|
||||
[ "$firewall_area" = 5 ] && {
|
||||
echo -e " 5 \033[32mTCP旁路转发\033[0m： 仅转发TCP流量至旁路由"
|
||||
echo -e " 6 \033[36mT&U旁路转发\033[0m： 转发TCP&UDP流量至旁路由"
|
||||
echo "-----------------------------------------------"
|
||||
}
|
||||
echo -e " 7 设置代理范围： \033[47;30m$firewall_area_dsc\033[0m"
|
||||
echo -e " 8 容器/虚拟机代理： \033[47;30m$vm_redir\033[0m"
|
||||
echo -e " 9 切换防火墙应用： \033[47;30m$firewall_mod\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
redir_mod=Redir模式
|
||||
set_redir_config
|
||||
set_redir_mod
|
||||
;;
|
||||
2)
|
||||
if [ -n "$sup_tun" ]; then
|
||||
redir_mod=混合模式
|
||||
set_redir_config
|
||||
else
|
||||
echo -e "\033[31m设备未检测到Tun内核模块，请尝试其他模式或者安装相关依赖！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
set_redir_mod
|
||||
;;
|
||||
3)
|
||||
if [ "$firewall_mod" = "iptables" ]; then
|
||||
if [ -f /etc/init.d/qca-nss-ecm -a "$systype" = "mi_snapshot" ]; then
|
||||
read -p "xiaomi设备的QOS服务与本模式冲突，是否禁用相关功能？(1/0) > " res
|
||||
[ "$res" = '1' ] && {
|
||||
${CRASHDIR}/misnap_init.sh tproxyfix
|
||||
redir_mod=Tproxy模式
|
||||
set_redir_config
|
||||
}
|
||||
elif grep -qE '^TPROXY$' /proc/net/ip_tables_targets || modprobe xt_TPROXY >/dev/null 2>&1; then
|
||||
redir_mod=Tproxy模式
|
||||
set_redir_config
|
||||
else
|
||||
echo -e "\033[31m设备未检测到iptables-mod-tproxy模块，请尝试其他模式或者安装相关依赖！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
elif [ "$firewall_mod" = "nftables" ]; then
|
||||
if modprobe nft_tproxy >/dev/null 2>&1 || lsmod 2>/dev/null | grep -q nft_tproxy; then
|
||||
redir_mod=Tproxy模式
|
||||
set_redir_config
|
||||
else
|
||||
echo -e "\033[31m设备未检测到nft_tproxy内核模块，请尝试其他模式或者安装相关依赖！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
fi
|
||||
set_redir_mod
|
||||
;;
|
||||
4)
|
||||
if [ -n "$sup_tun" ]; then
|
||||
redir_mod=Tun模式
|
||||
set_redir_config
|
||||
else
|
||||
echo -e "\033[31m设备未检测到Tun内核模块，请尝试其他模式或者安装相关依赖！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
set_redir_mod
|
||||
;;
|
||||
5)
|
||||
redir_mod=TCP旁路转发
|
||||
set_redir_config
|
||||
set_redir_mod
|
||||
;;
|
||||
6)
|
||||
redir_mod=T &
|
||||
U旁路转发
|
||||
set_redir_config
|
||||
set_redir_mod
|
||||
;;
|
||||
7)
|
||||
set_firewall_area
|
||||
set_redir_mod
|
||||
;;
|
||||
8)
|
||||
set_firewall_vm
|
||||
set_redir_mod
|
||||
;;
|
||||
9)
|
||||
if [ "$firewall_mod" = 'iptables' ]; then
|
||||
if nft add table inet shellcrash 2>/dev/null; then
|
||||
firewall_mod=nftables
|
||||
redir_mod=Redir模式
|
||||
setconfig redir_mod $redir_mod
|
||||
else
|
||||
echo -e "\033[31m当前设备未安装nftables或者nftables版本过低(<1.0.2),无法切换！\033[0m"
|
||||
fi
|
||||
elif [ "$firewall_mod" = 'nftables' ]; then
|
||||
if ckcmd iptables; then
|
||||
firewall_mod=iptables
|
||||
redir_mod=Redir模式
|
||||
setconfig redir_mod $redir_mod
|
||||
else
|
||||
echo -e "\033[31m当前设备未安装iptables,无法切换！\033[0m"
|
||||
fi
|
||||
else
|
||||
iptables -j REDIRECT -h >/dev/null 2>&1 && firewall_mod=iptables
|
||||
nft add table inet shellcrash 2>/dev/null && firewall_mod=nftables
|
||||
if [ -n "$firewall_mod" ]; then
|
||||
redir_mod=Redir模式
|
||||
setconfig redir_mod $redir_mod
|
||||
setconfig firewall_mod $firewall_mod
|
||||
else
|
||||
echo -e "\033[31m检测不到可用的防火墙应用(iptables/nftables),无法切换！\033[0m"
|
||||
fi
|
||||
fi
|
||||
sleep 1
|
||||
setconfig firewall_mod $firewall_mod
|
||||
set_redir_mod
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
set_dns_mod() { #DNS模式设置
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "当前DNS运行模式为：\033[47;30m $dns_mod \033[0m"
|
||||
echo -e "\033[33m切换模式后需要手动重启服务以生效！\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 fake-ip模式： 响应快，\033[33m兼容性较差\033[0m"
|
||||
echo -e " 不支持CN-IP绕过功能"
|
||||
echo -e " 2 redir_host模式：\033[33m不安全，易被污染\033[0m"
|
||||
echo -e " 建议搭配第三方DNS服务使用"
|
||||
if echo "$crashcore" | grep -q 'singbox' || [ "$crashcore" = meta ]; then
|
||||
echo -e " 3 mix混合模式： \033[32m防污染防泄露，响应快，推荐！\033[0m"
|
||||
echo -e " cn域名realip其他fakeip分流"
|
||||
echo -e " 4 route模式： \033[32m防污染防泄露，全真实IP\033[0m"
|
||||
echo -e " cn域名realip其他dns2proxy分流"
|
||||
fi
|
||||
echo -e " 9 \033[36mDNS进阶设置\033[0m"
|
||||
echo " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
dns_mod=fake-ip
|
||||
setconfig dns_mod $dns_mod
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
|
||||
;;
|
||||
2)
|
||||
dns_mod=redir_host
|
||||
setconfig dns_mod $dns_mod
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
|
||||
;;
|
||||
3)
|
||||
if echo "$crashcore" | grep -q 'singbox' || [ "$crashcore" = meta ]; then
|
||||
dns_mod=mix
|
||||
setconfig dns_mod $dns_mod
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
|
||||
else
|
||||
echo -e "\033[31m当前内核不支持的功能！！！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
;;
|
||||
4)
|
||||
if echo "$crashcore" | grep -q 'singbox' || [ "$crashcore" = meta ]; then
|
||||
dns_mod=route
|
||||
setconfig dns_mod $dns_mod
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
|
||||
else
|
||||
echo -e "\033[31m当前内核不支持的功能！！！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
;;
|
||||
9)
|
||||
setdns
|
||||
set_dns_mod
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
set_fw_filter(){ #流量过滤
|
||||
[ -z "$common_ports" ] && common_ports=已开启
|
||||
[ -z "$quic_rj" ] && quic_rj=未开启
|
||||
[ -z "$cn_ip_route" ] && cn_ip_route=未开启
|
||||
[ -z "$(cat ${CRASHDIR}/configs/mac ${CRASHDIR}/configs/ip_filter 2>/dev/null)" ] && mac_return=未开启 || mac_return=已启用
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 过滤非常用端口： \033[36m$common_ports\033[0m ————用于过滤P2P流量"
|
||||
echo -e " 2 过滤局域网设备： \033[36m$mac_return\033[0m ————使用黑/白名单进行过滤"
|
||||
echo -e " 3 过滤QUIC协议: \033[36m$quic_rj\033[0m ————优化视频性能"
|
||||
[ "$dns_mod" != "fake-ip" ] &&
|
||||
echo -e " 4 过滤CN_IP(6)列表: \033[36m$cn_ip_route\033[0m ————优化性能，不兼容Fake-ip"
|
||||
echo -e " 5 自定义透明路由ipv4网段: 适合vlan等复杂网络环境"
|
||||
echo -e " 6 自定义保留地址ipv4网段: 需要以保留地址为访问目标的环境"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 返回上级菜单 \033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0)
|
||||
;;
|
||||
1)
|
||||
set_common_ports() {
|
||||
if [ "$common_ports" = "未开启" ]; then
|
||||
echo -e "\033[33m当前代理端口为：【$multiport】\033[0m"
|
||||
echo -e "\033[31m注意，fake-ip模式下，非常用端口的域名连接将不受影响！！\033[0m"
|
||||
read -p "是否修改默认端口？(1/0) > " res
|
||||
[ "$res" = "1" ] && {
|
||||
read -p "请输入自定义端口,注意用小写逗号分隔 > " text
|
||||
[ -n "$text" ] && setconfig multiport $text && echo -e "\033[33m已设为代理【$multiport】端口！！\033[0m"
|
||||
}
|
||||
common_ports=已开启
|
||||
sleep 1
|
||||
else
|
||||
echo -e "\033[33m已设为代理全部端口！！\033[0m"
|
||||
common_ports=未开启
|
||||
fi
|
||||
setconfig common_ports $common_ports
|
||||
}
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$(pidof CrashCore)" ]; then
|
||||
read -p "切换时将停止服务，是否继续？(1/0) > " res
|
||||
[ "$res" = 1 ] && ${CRASHDIR}/start.sh stop && set_common_ports
|
||||
else
|
||||
set_common_ports
|
||||
fi
|
||||
set_fw_filter
|
||||
;;
|
||||
2)
|
||||
checkcfg_mac=$(cat ${CRASHDIR}/configs/mac)
|
||||
fw_filter_lan
|
||||
if [ -n "$PID" ]; then
|
||||
checkcfg_mac_new=$(cat ${CRASHDIR}/configs/mac)
|
||||
[ "$checkcfg_mac" != "$checkcfg_mac_new" ] && checkrestart
|
||||
fi
|
||||
set_fw_filter
|
||||
;;
|
||||
3)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$(echo "$redir_mod" | grep -oE '混合|Tproxy|Tun')" ]; then
|
||||
if [ "$quic_rj" = "未开启" ]; then
|
||||
echo -e "\033[33m已禁止QUIC流量通过ShellCrash内核！！\033[0m"
|
||||
quic_rj=已启用
|
||||
else
|
||||
echo -e "\033[33m已取消禁止QUIC协议流量！！\033[0m"
|
||||
quic_rj=未开启
|
||||
fi
|
||||
setconfig quic_rj $quic_rj
|
||||
else
|
||||
echo -e "\033[33m当前模式默认不会代理UDP流量，无需设置！！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_fw_filter
|
||||
;;
|
||||
4)
|
||||
if [ -n "$(ipset -v 2>/dev/null)" ] || [ "$firewall_mod" = 'nftables' ]; then
|
||||
if [ "$cn_ip_route" = "未开启" ]; then
|
||||
echo -e "\033[32m已开启CN_IP绕过内核功能！！\033[0m"
|
||||
echo -e "\033[31m注意！！！此功能会导致全局模式及一切CN相关规则失效！！！\033[0m"
|
||||
cn_ip_route=已开启
|
||||
sleep 2
|
||||
else
|
||||
echo -e "\033[33m已禁用CN_IP绕过内核功能！！\033[0m"
|
||||
cn_ip_route=未开启
|
||||
fi
|
||||
setconfig cn_ip_route $cn_ip_route
|
||||
else
|
||||
echo -e "\033[31m当前设备缺少ipset模块或未使用nftables模式，无法启用绕过功能！！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
set_fw_filter
|
||||
;;
|
||||
5)
|
||||
set_cust_host_ipv4
|
||||
set_fw_filter
|
||||
;;
|
||||
6)
|
||||
[ -z "$reserve_ipv4" ] && reserve_ipv4="0.0.0.0/8 10.0.0.0/8 127.0.0.0/8 100.64.0.0/10 169.254.0.0/16 172.16.0.0/12 192.168.0.0/16 224.0.0.0/4 240.0.0.0/4"
|
||||
echo -e "当前网段：\033[36m$reserve_ipv4\033[0m"
|
||||
echo -e "\033[33m地址必须是空格分隔，错误的设置可能导致网络回环或启动报错，请务必谨慎！\033[0m"
|
||||
read -p "请输入 > " text
|
||||
if [ -n "$(
|
||||
echo $text | grep -E "(((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])/(3[0-2]|[1-2]?[0-9]))( +|$)+"
|
||||
)" ]; then
|
||||
reserve_ipv4="$text"
|
||||
echo -e "已将保留地址网段设为：\033[32m$reserve_ipv4\033[0m"
|
||||
setconfig reserve_ipv4 "'$reserve_ipv4'"
|
||||
else
|
||||
echo -e "\033[31m输入有误，操作已取消！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_fw_filter
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
set_cust_host_ipv4() { #自定义ipv4透明路由网段
|
||||
[ -z "$replace_default_host_ipv4" ] && replace_default_host_ipv4="未启用"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "当前默认透明路由的网段为: \033[32m$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep 'br' | grep -v 'iot' | grep -E ' 1(92|0|72)\.' | sed 's/.*inet.//g' | sed 's/br.*$//g' | sed 's/metric.*$//g' | tr '\n' ' ' && echo) \033[0m"
|
||||
echo -e "当前已添加的自定义网段为:\033[36m$cust_host_ipv4\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 移除所有自定义网段"
|
||||
echo -e " 2 使用自定义网段覆盖默认网段 \033[36m$replace_default_host_ipv4\033[0m"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请输入对应的序号或需要额外添加的网段 > " text
|
||||
case "$text" in
|
||||
2)
|
||||
if [ "$replace_default_host_ipv4" == "未启用" ]; then
|
||||
replace_default_host_ipv4="已启用"
|
||||
else
|
||||
replace_default_host_ipv4="未启用"
|
||||
fi
|
||||
setconfig replace_default_host_ipv4 "$replace_default_host_ipv4"
|
||||
set_cust_host_ipv4
|
||||
;;
|
||||
1)
|
||||
unset cust_host_ipv4
|
||||
setconfig cust_host_ipv4
|
||||
set_cust_host_ipv4
|
||||
;;
|
||||
0) ;;
|
||||
*)
|
||||
if [ -n "$(echo $text | grep -Eo '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]{1,2}'$)" -a -z "$(echo $cust_host_ipv4 | grep "$text")" ]; then
|
||||
cust_host_ipv4="$cust_host_ipv4 $text"
|
||||
setconfig cust_host_ipv4 "'$cust_host_ipv4'"
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m请输入正确的网段地址！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_cust_host_ipv4
|
||||
;;
|
||||
esac
|
||||
}
|
||||
fw_filter_lan() { #局域网设备过滤
|
||||
get_devinfo() {
|
||||
dev_ip=$(cat $dhcpdir | grep " $dev " | awk '{print $3}') && [ -z "$dev_ip" ] && dev_ip=$dev
|
||||
dev_mac=$(cat $dhcpdir | grep " $dev " | awk '{print $2}') && [ -z "$dev_mac" ] && dev_mac=$dev
|
||||
dev_name=$(cat $dhcpdir | grep " $dev " | awk '{print $4}') && [ -z "$dev_name" ] && dev_name='未知设备'
|
||||
}
|
||||
add_mac() {
|
||||
echo "-----------------------------------------------"
|
||||
echo 已添加的mac地址：
|
||||
cat ${CRASHDIR}/configs/mac 2>/dev/null
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m序号 设备IP 设备mac地址 设备名称\033[32m"
|
||||
cat $dhcpdir | awk '{print " "NR" "$3,$2,$4}'
|
||||
echo -e "\033[0m-----------------------------------------------"
|
||||
echo -e "手动输入mac地址时仅支持\033[32mxx:xx:xx:xx:xx:xx\033[0m的形式"
|
||||
echo -e " 0 或回车 结束添加"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应序号或直接输入mac地址 > " num
|
||||
if [ -z "$num" -o "$num" = 0 ]; then
|
||||
i=
|
||||
elif [ -n "$(echo $num | grep -aE '^([0-9A-Fa-f]{2}[:]){5}([0-9A-Fa-f]{2})$')" ]; then
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/mac | grep -E "$num")" ]; then
|
||||
echo $num | grep -oE '^([0-9A-Fa-f]{2}[:]){5}([0-9A-Fa-f]{2})$' >>${CRASHDIR}/configs/mac
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
|
||||
fi
|
||||
add_mac
|
||||
elif [ $num -le $(cat $dhcpdir 2>/dev/null | awk 'END{print NR}') ]; then
|
||||
macadd=$(cat $dhcpdir | awk '{print $2}' | sed -n "$num"p)
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/mac | grep -E "$macadd")" ]; then
|
||||
echo $macadd >>${CRASHDIR}/configs/mac
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
|
||||
fi
|
||||
add_mac
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m输入有误，请重新输入！\033[0m"
|
||||
add_mac
|
||||
fi
|
||||
}
|
||||
add_ip() {
|
||||
echo "-----------------------------------------------"
|
||||
echo "已添加的IP地址(段)："
|
||||
cat ${CRASHDIR}/configs/ip_filter 2>/dev/null
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m序号 设备IP 设备名称\033[32m"
|
||||
cat $dhcpdir | awk '{print " "NR" "$3,$4}'
|
||||
echo -e "\033[0m-----------------------------------------------"
|
||||
echo -e "手动输入时仅支持\033[32m 192.168.1.0/24\033[0m 或 \033[32m192.168.1.0\033[0m 的形式"
|
||||
echo -e "不支持ipv6地址过滤，如有需求请使用mac地址过滤"
|
||||
echo -e " 0 或回车 结束添加"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应序号或直接输入IP地址段 > " num
|
||||
if [ -z "$num" -o "$num" = 0 ]; then
|
||||
i=
|
||||
elif [ -n "$(echo $num | grep -aE '^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)(/(3[0-2]|[12]?[0-9]))?$')" ]; then
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/ip_filter | grep -E "$num")" ]; then
|
||||
echo $num | grep -oE '^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)(/(3[0-2]|[12]?[0-9]))?$' >>${CRASHDIR}/configs/ip_filter
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m已添加的地址，请勿重复添加！\033[0m"
|
||||
fi
|
||||
add_ip
|
||||
elif [ $num -le $(cat $dhcpdir 2>/dev/null | awk 'END{print NR}') ]; then
|
||||
ipadd=$(cat $dhcpdir | awk '{print $3}' | sed -n "$num"p)
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/mac | grep -E "$ipadd")" ]; then
|
||||
echo $ipadd >>${CRASHDIR}/configs/ip_filter
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m已添加的地址，请勿重复添加！\033[0m"
|
||||
fi
|
||||
add_ip
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m输入有误，请重新输入！\033[0m"
|
||||
add_ip
|
||||
fi
|
||||
}
|
||||
del_all() {
|
||||
echo "-----------------------------------------------"
|
||||
if [ -z "$(cat ${CRASHDIR}/configs/mac ${CRASHDIR}/configs/ip_filter 2>/dev/null)" ]; then
|
||||
echo -e "\033[31m列表中没有需要移除的设备！\033[0m"
|
||||
sleep 1
|
||||
else
|
||||
echo -e "请选择需要移除的设备：\033[36m"
|
||||
echo -e "\033[33m 设备IP 设备mac地址 设备名称\033[0m"
|
||||
i=1
|
||||
for dev in $(cat ${CRASHDIR}/configs/mac ${CRASHDIR}/configs/ip_filter 2>/dev/null); do
|
||||
get_devinfo
|
||||
echo -e " $i \033[32m$dev_ip \033[36m$dev_mac \033[32m$dev_name\033[0m"
|
||||
i=$((i + 1))
|
||||
done
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[0m 0 或回车 结束删除"
|
||||
read -p "请输入需要移除的设备的对应序号 > " num
|
||||
mac_filter_rows=$(cat ${CRASHDIR}/configs/mac 2>/dev/null | wc -l)
|
||||
ip_filter_rows=$(cat ${CRASHDIR}/configs/ip_filter 2>/dev/null | wc -l)
|
||||
if [ -z "$num" ] || [ "$num" -le 0 ]; then
|
||||
n=
|
||||
elif [ $num -le $mac_filter_rows ]; then
|
||||
sed -i "${num}d" ${CRASHDIR}/configs/mac
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m对应设备已移除！\033[0m"
|
||||
del_all
|
||||
elif [ $num -le $((mac_filter_rows + ip_filter_rows)) ]; then
|
||||
num=$((num - mac_filter_rows))
|
||||
sed -i "${num}d" ${CRASHDIR}/configs/ip_filter
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m对应设备已移除！\033[0m"
|
||||
del_all
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m输入有误，请重新输入！\033[0m"
|
||||
del_all
|
||||
fi
|
||||
fi
|
||||
}
|
||||
echo "-----------------------------------------------"
|
||||
[ -z "$dhcpdir" ] && [ -f /var/lib/dhcp/dhcpd.leases ] && dhcpdir='/var/lib/dhcp/dhcpd.leases'
|
||||
[ -z "$dhcpdir" ] && [ -f /var/lib/dhcpd/dhcpd.leases ] && dhcpdir='/var/lib/dhcpd/dhcpd.leases'
|
||||
[ -z "$dhcpdir" ] && [ -f /tmp/dhcp.leases ] && dhcpdir='/tmp/dhcp.leases'
|
||||
[ -z "$dhcpdir" ] && [ -f /tmp/dnsmasq.leases ] && dhcpdir='/tmp/dnsmasq.leases'
|
||||
[ -z "$dhcpdir" ] && dhcpdir='/dev/null'
|
||||
[ -z "$fw_filter_lan_type" ] && fw_filter_lan_type='黑名单'
|
||||
if [ "$fw_filter_lan_type" = "黑名单" ]; then
|
||||
fw_filter_lan_over='白名单'
|
||||
fw_filter_lan_scrip='不'
|
||||
else
|
||||
fw_filter_lan_over='黑名单'
|
||||
fw_filter_lan_scrip=''
|
||||
fi
|
||||
######
|
||||
echo -e "\033[30;47m请在此添加或移除设备\033[0m"
|
||||
echo -e "当前过滤方式为：\033[33m$fw_filter_lan_type模式\033[0m"
|
||||
echo -e "仅列表内设备流量\033[36m$fw_filter_lan_scrip经过\033[0m内核"
|
||||
if [ -n "$(cat ${CRASHDIR}/configs/mac)" ]; then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "当前已过滤设备为：\033[36m"
|
||||
echo -e "\033[33m 设备mac/ip地址 设备名称\033[0m"
|
||||
for dev in $(cat ${CRASHDIR}/configs/mac 2>/dev/null); do
|
||||
get_devinfo
|
||||
echo -e "\033[36m$dev_mac \033[0m$dev_name"
|
||||
done
|
||||
for dev in $(cat ${CRASHDIR}/configs/ip_filter 2>/dev/null); do
|
||||
get_devinfo
|
||||
echo -e "\033[32m$dev_ip \033[0m$dev_name"
|
||||
done
|
||||
echo "-----------------------------------------------"
|
||||
fi
|
||||
echo -e " 1 切换为\033[33m$fw_filter_lan_over模式\033[0m"
|
||||
echo -e " 2 \033[32m添加指定设备(mac地址)\033[0m"
|
||||
echo -e " 3 \033[32m添加指定设备(IP地址/网段)\033[0m"
|
||||
echo -e " 4 \033[36m移除指定设备\033[0m"
|
||||
echo -e " 9 \033[31m清空整个列表\033[0m"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
fw_filter_lan_type=$fw_filter_lan_over
|
||||
setconfig fw_filter_lan_type $fw_filter_lan_type
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m已切换为$fw_filter_lan_type模式！\033[0m"
|
||||
fw_filter_lan
|
||||
;;
|
||||
2)
|
||||
add_mac
|
||||
fw_filter_lan
|
||||
;;
|
||||
3)
|
||||
add_ip
|
||||
fw_filter_lan
|
||||
;;
|
||||
4)
|
||||
del_all
|
||||
fw_filter_lan
|
||||
;;
|
||||
9)
|
||||
: >${CRASHDIR}/configs/mac
|
||||
: >${CRASHDIR}/configs/ip_filter
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m设备列表已清空！\033[0m"
|
||||
fw_filter_lan
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
set_adv_config() { #端口设置
|
||||
. "$CFG_PATH" >/dev/null
|
||||
[ -z "$secret" ] && secret=未设置
|
||||
[ -z "$table" ] && table=100
|
||||
[ -z "$authentication" ] && auth=未设置 || auth=******
|
||||
inputport() {
|
||||
read -p "请输入端口号(1-65535) > " portx
|
||||
. "$CRASHDIR"/menus/check_port.sh #加载测试函数
|
||||
if check_port "$portx"; then
|
||||
setconfig "$xport" "$portx"
|
||||
echo -e "\033[32m设置成功！！！\033[0m"
|
||||
set_adv_config
|
||||
else
|
||||
sleep 1
|
||||
fi
|
||||
}
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 修改Http/Sock5端口： \033[36m$mix_port\033[0m"
|
||||
echo -e " 2 设置Http/Sock5密码： \033[36m$auth\033[0m"
|
||||
echo -e " 3 修改Redir/Tproxy端口：\033[36m$redir_port,$((redir_port + 1))\033[0m"
|
||||
echo -e " 4 修改DNS监听端口： \033[36m$dns_port\033[0m"
|
||||
echo -e " 5 修改面板访问端口： \033[36m$db_port\033[0m"
|
||||
echo -e " 6 设置面板访问密码： \033[36m$secret\033[0m"
|
||||
echo -e " 7 修改默认端口过滤： \033[36m$multiport\033[0m"
|
||||
echo -e " 8 自定义本机host地址： \033[36m$host\033[0m"
|
||||
echo -e " 9 自定义路由表： \033[36m$table,$((table + 1))\033[0m"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
xport=mix_port
|
||||
inputport
|
||||
;;
|
||||
2)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "格式必须是\033[32m 用户名:密码 \033[0m的形式，注意用小写冒号分隔！"
|
||||
echo -e "请尽量不要使用特殊符号！避免产生未知错误！"
|
||||
echo "输入 0 删除密码"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入Http/Sock5用户名及密码 > " input
|
||||
if [ "$input" = "0" ]; then
|
||||
authentication=""
|
||||
setconfig authentication
|
||||
echo 密码已移除！
|
||||
else
|
||||
if [ "$local_proxy" = "已开启" -a "$local_type" = "环境变量" ]; then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m请先禁用本机代理功能或使用增强模式！\033[0m"
|
||||
sleep 1
|
||||
else
|
||||
authentication=$(echo $input | grep :)
|
||||
if [ -n "$authentication" ]; then
|
||||
setconfig authentication "'$authentication'"
|
||||
echo -e "\033[32m设置成功！！！\033[0m"
|
||||
else
|
||||
echo -e "\033[31m输入有误，请重新输入！\033[0m"
|
||||
fi
|
||||
fi
|
||||
fi
|
||||
set_adv_config
|
||||
;;
|
||||
3)
|
||||
xport=redir_port
|
||||
inputport
|
||||
;;
|
||||
4)
|
||||
xport=dns_port
|
||||
inputport
|
||||
;;
|
||||
5)
|
||||
xport=db_port
|
||||
inputport
|
||||
;;
|
||||
6)
|
||||
read -p "请输入面板访问密码(输入0删除密码) > " secret
|
||||
if [ -n "$secret" ]; then
|
||||
[ "$secret" = "0" ] && secret=""
|
||||
setconfig secret $secret
|
||||
echo -e "\033[32m设置成功！！！\033[0m"
|
||||
fi
|
||||
set_adv_config
|
||||
;;
|
||||
7)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "需配合\033[32m仅代理常用端口\033[0m功能使用"
|
||||
echo -e "多个端口请用小写逗号分隔，例如：\033[33m143,80,443\033[0m"
|
||||
echo -e "输入 0 重置为默认端口"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入需要指定代理的端口 > " multiport
|
||||
if [ -n "$multiport" ]; then
|
||||
[ "$multiport" = "0" ] && multiport="22,80,143,194,443,465,587,853,993,995,5222,8080,8443"
|
||||
common_ports=已开启
|
||||
setconfig multiport "$multiport"
|
||||
setconfig common_ports "$common_ports"
|
||||
echo -e "\033[32m设置成功！！！\033[0m"
|
||||
fi
|
||||
set_adv_config
|
||||
;;
|
||||
8)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m如果你的局域网网段不是192.168.x或172.16.x或10.x开头，请务必修改！\033[0m"
|
||||
echo -e "\033[31m设置后如本机host地址有变动，请务必重新修改！\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入自定义host地址(输入0移除自定义host) > " host
|
||||
if [ "$host" = "0" ]; then
|
||||
host=""
|
||||
setconfig host "$host"
|
||||
echo -e "\033[32m已经移除自定义host地址，请重新运行脚本以自动获取host！！！\033[0m"
|
||||
exit 0
|
||||
elif [ -n "$(echo $host | grep -E -o '\<([1-9]|[1-9][0-9]|1[0-9]{2}|2[01][0-9]|22[0-3])\>(\.\<([0-9]|[0-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\>){2}\.\<([1-9]|[0-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-4])\>')" ]; then
|
||||
setconfig host "$host"
|
||||
echo -e "\033[32m设置成功！！！\033[0m"
|
||||
else
|
||||
host=""
|
||||
echo -e "\033[31m输入错误，请仔细核对！！！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
set_adv_config
|
||||
;;
|
||||
9)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m仅限Tproxy、Tun或混合模式路由表出现冲突时才需要设置！\033[0m"
|
||||
read -p "请输入路由表地址(不明勿动！建议102-125之间) > " table
|
||||
if [ -n "$table" ]; then
|
||||
[ "$table" = "0" ] && table="100"
|
||||
setconfig table "$table"
|
||||
echo -e "\033[32m设置成功！！！\033[0m"
|
||||
fi
|
||||
set_adv_config
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
set_firewall_area() { #代理范围设置
|
||||
[ -z "$vm_redir" ] && vm_redir='未开启'
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m注意：\033[0m基于桥接网卡的Docker/虚拟机流量，请单独启用6！"
|
||||
echo -e "\033[33m如你使用了第三方DNS如smartdns等，请勿启用本机代理或使用shellcrash用户执行！\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 \033[32m仅代理局域网流量\033[0m"
|
||||
echo -e " 2 \033[36m仅代理本机流量\033[0m"
|
||||
echo -e " 3 \033[32m代理局域网+本机流量\033[0m"
|
||||
echo -e " 4 不配置流量代理(纯净模式)\033[0m"
|
||||
#echo -e " 5 \033[33m转发局域网流量到旁路由设备\033[0m"
|
||||
echo -e " 0 返回上级菜单"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
[1-4])
|
||||
[ $firewall_area -ge 4 ] && {
|
||||
redir_mod=Redir模式
|
||||
setconfig redir_mod $redir_mod
|
||||
}
|
||||
[ "$num" = 4 ] && {
|
||||
redir_mod=纯净模式
|
||||
setconfig redir_mod $redir_mod
|
||||
}
|
||||
firewall_area=$num
|
||||
setconfig firewall_area $firewall_area
|
||||
;;
|
||||
5)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[31m注意：\033[0m此功能存在多种风险如无网络基础请勿尝试！"
|
||||
echo -e "\033[33m说明：\033[0m此功能不启动内核仅配置防火墙转发，且子设备无需额外设置网关DNS"
|
||||
echo -e "\033[33m说明：\033[0m支持防火墙分流及设备过滤，支持部分定时任务，但不支持ipv6！"
|
||||
echo -e "\033[31m注意：\033[0m如需代理UDP，请确保旁路由运行了支持UDP代理的模式！"
|
||||
echo -e "\033[31m注意：\033[0m如使用systemd方式启动，内核依然会空载运行，建议使用保守模式！"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入旁路由IPV4地址 > " bypass_host
|
||||
[ -n "$bypass_host" ] && {
|
||||
firewall_area=$num
|
||||
setconfig firewall_area $firewall_area
|
||||
setconfig bypass_host $bypass_host
|
||||
redir_mod=TCP旁路转发
|
||||
setconfig redir_mod $redir_mod
|
||||
}
|
||||
;;
|
||||
*) errornum ;;
|
||||
esac
|
||||
sleep 1
|
||||
}
|
||||
set_firewall_vm(){
|
||||
if [ -n "$vm_ipv4" ]; then
|
||||
vm_des='当前代理'
|
||||
else
|
||||
vm_ipv4=$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep 'brd' | grep -E 'docker|podman|virbr|vnet|ovs|vmbr|veth|vmnic|vboxnet|lxcbr|xenbr|vEthernet' | sed 's/.*inet.//g' | sed 's/ br.*$//g' | sed 's/metric.*$//g' | tr '\n' ' ')
|
||||
vm_des='当前获取到'
|
||||
fi
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "$vm_des的容器/虚拟机网段为：\033[32m$vm_ipv4\033[0m"
|
||||
echo -e "如未包含容器网段，请先运行容器再运行脚本或者手动设置网段"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 \033[32m启用代理并使用默认网段\033[0m"
|
||||
echo -e " 2 \033[36m启用代理并自定义网段\033[0m"
|
||||
echo -e " 3 \033[31m禁用代理\033[0m"
|
||||
echo -e " 0 返回上级菜单"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
1)
|
||||
if [ -n "$vm_ipv4" ]; then
|
||||
vm_redir=已开启
|
||||
else
|
||||
echo -e "\033[33m请先运行容器再运行脚本或者手动设置网段\033[0m"
|
||||
fi
|
||||
;;
|
||||
2)
|
||||
echo -e "多个网段请用空格连接，可运行容器后使用【ip route】命令查看网段地址"
|
||||
echo -e "示例：\033[32m10.88.0.0/16 172.17.0.0/16\033[0m"
|
||||
read -p "请输入自定义网段 > " text
|
||||
[ -n "$text" ] && vm_ipv4=$text && vm_redir=已开启
|
||||
;;
|
||||
3)
|
||||
vm_redir=未开启
|
||||
unset vm_ipv4
|
||||
;;
|
||||
*) ;;
|
||||
esac
|
||||
setconfig vm_redir $vm_redir
|
||||
setconfig vm_ipv4 "'$vm_ipv4'"
|
||||
sleep 1
|
||||
set_redir_mod
|
||||
}
|
||||
set_ipv6() { #ipv6设置
|
||||
[ -z "$ipv6_redir" ] && ipv6_redir=未开启
|
||||
[ -z "$ipv6_dns" ] && ipv6_dns=已开启
|
||||
[ -z "$cn_ipv6_route" ] && cn_ipv6_route=未开启
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 ipv6透明代理: \033[36m$ipv6_redir\033[0m ——代理ipv6流量"
|
||||
[ "$disoverride" != "1" ] && echo -e " 2 ipv6-DNS解析: \033[36m$ipv6_dns\033[0m ——决定内置DNS是否返回ipv6地址"
|
||||
echo -e " 3 CNV6绕过内核: \033[36m$cn_ipv6_route\033[0m ——优化性能，不兼容fake-ip"
|
||||
echo -e " 0 返回上级菜单"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
if [ "$ipv6_redir" = "未开启" ]; then
|
||||
ipv6_support=已开启
|
||||
ipv6_redir=已开启
|
||||
sleep 2
|
||||
else
|
||||
ipv6_redir=未开启
|
||||
fi
|
||||
setconfig ipv6_redir $ipv6_redir
|
||||
setconfig ipv6_support $ipv6_support
|
||||
set_ipv6
|
||||
;;
|
||||
2)
|
||||
[ "$ipv6_dns" = "未开启" ] && ipv6_dns=已开启 || ipv6_dns=未开启
|
||||
setconfig ipv6_dns $ipv6_dns
|
||||
set_ipv6
|
||||
;;
|
||||
3)
|
||||
if [ "$ipv6_redir" = "未开启" ]; then
|
||||
ipv6_support=已开启
|
||||
ipv6_redir=已开启
|
||||
setconfig ipv6_redir $ipv6_redir
|
||||
setconfig ipv6_support $ipv6_support
|
||||
fi
|
||||
if [ -n "$(ipset -v 2>/dev/null)" ] || [ "$firewall_mod" = nftables ]; then
|
||||
[ "$cn_ipv6_route" = "未开启" ] && cn_ipv6_route=已开启 || cn_ipv6_route=未开启
|
||||
setconfig cn_ipv6_route $cn_ipv6_route
|
||||
else
|
||||
echo -e "\033[31m当前设备缺少ipset模块或防火墙未使用nftables，无法启用绕过功能！！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
set_ipv6
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
583
scripts/menus/task.sh
Normal file
583
scripts/menus/task.sh
Normal file
@@ -0,0 +1,583 @@
|
||||
#!/bin/ash
|
||||
# Copyright (C) Juewuy
|
||||
|
||||
#加载全局变量
|
||||
[ -z "$CRASHDIR" ] && CRASHDIR=$(cd "$(dirname "$(dirname "$0")")"; pwd)
|
||||
[ -z "$BINDIR" ] && BINDIR=${CRASHDIR}
|
||||
CFG_PATH=${CRASHDIR}/configs/ShellCrash.cfg
|
||||
TMPDIR=/tmp/ShellCrash && [ ! -f ${TMPDIR} ] && mkdir -p ${TMPDIR}
|
||||
. $CFG_PATH >/dev/null 2>&1
|
||||
[ -n "$(tar --help 2>&1|grep -o 'no-same-owner')" ] && tar_para='--no-same-owner' #tar命令兼容
|
||||
|
||||
setconfig(){
|
||||
#参数1代表变量名，参数2代表变量值,参数3即文件路径
|
||||
[ -z "$3" ] && configpath=$CFG_PATH || configpath=$3
|
||||
[ -n "$(grep "\b${1}=" $configpath)" ] && sed -i "s#\b${1}=.*#${1}=${2}#g" $configpath || echo "${1}=${2}" >> $configpath
|
||||
}
|
||||
ckcmd(){ #检查命令是否存在
|
||||
command -v sh >/dev/null 2>&1 && command -v $1 >/dev/null 2>&1 || type $1 >/dev/null 2>&1
|
||||
}
|
||||
|
||||
#任务命令
|
||||
check_update(){ #检查更新工具
|
||||
${CRASHDIR}/start.sh get_bin ${TMPDIR}/crashversion "$1" echooff
|
||||
[ "$?" = "0" ] && . ${TMPDIR}/crashversion 2>/dev/null
|
||||
rm -rf ${TMPDIR}/crashversion
|
||||
}
|
||||
update_core(){ #自动更新内核
|
||||
#检查版本
|
||||
check_update bin/version
|
||||
crash_v_new=$(eval echo \$${crashcore}_v)
|
||||
if [ -z "$crash_v_new" -o "$crash_v_new" = "$core_v" ];then
|
||||
logger "任务【自动更新内核】中止-未检测到版本更新"
|
||||
exit 1
|
||||
else
|
||||
echo "$crashcore" | grep -q 'singbox' && core_new=singbox || core_new=clash
|
||||
if [ -n "$custcorelink" ];then
|
||||
zip_type=$(echo $custcorelink | grep -oE 'tar.gz$')
|
||||
[ -z "$zip_type" ] && zip_type=$(echo $custcorelink | grep -oE 'gz$')
|
||||
if [ -n "$zip_type" ];then
|
||||
${CRASHDIR}/start.sh webget ${TMPDIR}/core_new.${zip_type} ${custcorelink}
|
||||
fi
|
||||
else
|
||||
${CRASHDIR}/start.sh get_bin ${TMPDIR}/core_new.tar.gz bin/${crashcore}/${core_new}-linux-${cpucore}.tar.gz
|
||||
fi
|
||||
if [ "$?" != "0" ];then
|
||||
logger "任务【自动更新内核】出错-下载失败！"
|
||||
${TMPDIR}/CrashCore.tar.gz
|
||||
return 1
|
||||
else
|
||||
[ -n "$(pidof CrashCore)" ] && ${CRASHDIR}/start.sh stop #停止内核服务防止内存不足
|
||||
[ -f ${TMPDIR}/core_new.tar.gz ] && {
|
||||
mkdir -p ${TMPDIR}/core_new_dir
|
||||
[ "$BINDIR" = "$TMPDIR" ] && rm -rf ${TMPDIR}/CrashCore #小闪存模式防止空间不足
|
||||
tar -zxf "${TMPDIR}/core_new.tar.gz" ${tar_para} -C ${TMPDIR}/core_new_dir/
|
||||
for file in $(find ${TMPDIR}/core_new_dir 2>/dev/null);do
|
||||
[ -f $file ] && [ -n "$(echo $file | sed 's#.*/##' | grep -iE '(CrashCore|sing|meta|mihomo|clash|premium)')" ] && mv -f $file ${TMPDIR}/core_new
|
||||
done
|
||||
rm -rf ${TMPDIR}/core_new_dir
|
||||
}
|
||||
[ -f ${TMPDIR}/core_new.gz ] && gunzip ${TMPDIR}/core_new.gz >/dev/null && rm -rf ${TMPDIR}/core_new.gz
|
||||
chmod +x ${TMPDIR}/core_new
|
||||
[ "$crashcore" = unknow ] && setcoretype
|
||||
if echo "$crashcore" | grep -q 'singbox';then
|
||||
core_v=$(${TMPDIR}/core_new version 2>/dev/null | grep version | awk '{print $3}')
|
||||
else
|
||||
core_v=$(${TMPDIR}/core_new -v 2>/dev/null | head -n 1 | sed 's/ linux.*//;s/.* //')
|
||||
fi
|
||||
if [ -z "$core_v" ];then
|
||||
logger "任务【自动更新内核】出错-内核校验失败！"
|
||||
rm -rf ${TMPDIR}/core_new.tar.gz
|
||||
rm -rf ${TMPDIR}/core_new
|
||||
${CRASHDIR}/start.sh start
|
||||
return 1
|
||||
else
|
||||
mv -f ${TMPDIR}/core_new ${TMPDIR}/CrashCore
|
||||
if [ -f ${TMPDIR}/core_new.tar.gz ];then
|
||||
mv -f ${TMPDIR}/core_new.tar.gz ${BINDIR}/CrashCore.tar.gz
|
||||
else
|
||||
tar -zcf ${BINDIR}/CrashCore.tar.gz ${tar_para} -C ${TMPDIR} CrashCore
|
||||
fi
|
||||
logger "任务【自动更新内核】下载完成，正在重启服务！"
|
||||
setconfig core_v $core_v
|
||||
${CRASHDIR}/start.sh start
|
||||
return 0
|
||||
fi
|
||||
fi
|
||||
fi
|
||||
}
|
||||
update_scripts(){ #自动更新脚本
|
||||
#检查版本
|
||||
check_update version
|
||||
if [ -z "$versionsh" -o "$versionsh" = "versionsh_l" ];then
|
||||
logger "任务【自动更新脚本】中止-未检测到版本更新"
|
||||
exit 1
|
||||
else
|
||||
${CRASHDIR}/start.sh get_bin ${TMPDIR}/clashfm.tar.gz "bin/update.tar.gz"
|
||||
if [ "$?" != "0" ];then
|
||||
rm -rf ${TMPDIR}/clashfm.tar.gz
|
||||
logger "任务【自动更新内核】出错-下载失败！"
|
||||
return 1
|
||||
else
|
||||
#停止服务
|
||||
${CRASHDIR}/start.sh stop
|
||||
#解压
|
||||
tar -zxf "${TMPDIR}/clashfm.tar.gz" ${tar_para} -C ${CRASHDIR}/
|
||||
if [ $? -ne 0 ];then
|
||||
rm -rf ${TMPDIR}/clashfm.tar.gz
|
||||
logger "任务【自动更新内核】出错-解压失败！"
|
||||
${CRASHDIR}/start.sh start
|
||||
return 1
|
||||
else
|
||||
. ${CRASHDIR}/init.sh >/dev/null
|
||||
${CRASHDIR}/start.sh start
|
||||
return 0
|
||||
fi
|
||||
fi
|
||||
fi
|
||||
}
|
||||
update_mmdb(){ #自动更新数据库
|
||||
getgeo(){
|
||||
#检查版本
|
||||
check_update bin/version
|
||||
geo_v="$(echo $2 | awk -F "." '{print $1}')_v" #获取版本号类型比如Country_v
|
||||
geo_v_new=$GeoIP_v
|
||||
geo_v_now=$(eval echo \$$geo_v)
|
||||
if [ -z "$geo_v_new" -o "$geo_v_new" = "$geo_v_now" ];then
|
||||
logger "任务【自动更新数据库文件】跳过-未检测到$2版本更新"
|
||||
else
|
||||
#更新文件
|
||||
${CRASHDIR}/start.sh get_bin ${TMPDIR}/$1 "bin/geodata/$2"
|
||||
if [ "$?" != "0" ];then
|
||||
logger "任务【自动更新数据库文件】更新【$2】下载失败！"
|
||||
rm -rf ${TMPDIR}/$1
|
||||
else
|
||||
mv -f ${TMPDIR}/$1 ${BINDIR}/$1
|
||||
setconfig $geo_v $GeoIP_v
|
||||
logger "任务【自动更新数据库文件】更新【$2】成功！"
|
||||
fi
|
||||
fi
|
||||
}
|
||||
[ -n "${cn_mini_v}" -a -s $CRASHDIR/Country.mmdb ] && getgeo Country.mmdb cn_mini.mmdb
|
||||
[ -n "${china_ip_list_v}" -a -s $CRASHDIR/cn_ip.txt ] && getgeo cn_ip.txt china_ip_list.txt
|
||||
[ -n "${china_ipv6_list_v}" -a -s $CRASHDIR/cn_ipv6.txt ] && getgeo cn_ipv6.txt china_ipv6_list.txt
|
||||
[ -n "${geosite_v}" -a -s $CRASHDIR/GeoSite.dat ] && getgeo GeoSite.dat geosite.dat
|
||||
[ -n "${geoip_cn_v}" -a -s $CRASHDIR/geoip.db ] && getgeo geoip.db geoip_cn.db
|
||||
[ -n "${geosite_cn_v}" -a -s $CRASHDIR/geosite.db ] && getgeo geosite.db geosite_cn.db
|
||||
[ -n "${mrs_geosite_cn_v}" -a -s $CRASHDIR/geosite-cn.mrs ] && getgeo geosite-cn.mrs mrs_geosite_cn.mrs
|
||||
[ -n "${srs_geoip_cn_v}" -a -s $CRASHDIR/geoip-cn.srs ] && getgeo geoip-cn.srs srs_geoip_cn.srs
|
||||
[ -n "${srs_geosite_cn_v}" -a -s $CRASHDIR/geosite-cn.srs ] && getgeo geosite-cn.srs srs_geosite_cn.srs
|
||||
return 0
|
||||
}
|
||||
reset_firewall(){ #重设透明路由防火墙
|
||||
${CRASHDIR}/start.sh stop_firewall
|
||||
${CRASHDIR}/start.sh afstart
|
||||
}
|
||||
ntp(){
|
||||
[ "$crashcore" != singbox ] && ckcmd ntpd && ntpd -n -q -p 203.107.6.88 >/dev/null 2>&1 || exit 0 &
|
||||
}
|
||||
#任务工具
|
||||
logger(){
|
||||
[ "$task_push" = 1 ] && push= || push=off
|
||||
[ -n "$2" -a "$2" != 0 ] && echo -e "\033[$2m$1\033[0m"
|
||||
[ "$3" = 'off' ] && push=off
|
||||
echo "$1" |grep -qE '(每隔|时每)([1-9]|[1-9][0-9])分钟' && push=off
|
||||
${CRASHDIR}/start.sh logger "$1" 0 "$push"
|
||||
}
|
||||
croncmd(){
|
||||
if [ -n "$(crontab -h 2>&1 | grep '\-l')" ];then
|
||||
crontab $1
|
||||
else
|
||||
crondir="$(crond -h 2>&1 | grep -oE 'Default:.*' | awk -F ":" '{print $2}')"
|
||||
[ ! -w "$crondir" ] && crondir="/etc/storage/cron/crontabs"
|
||||
[ ! -w "$crondir" ] && crondir="/var/spool/cron/crontabs"
|
||||
[ ! -w "$crondir" ] && crondir="/var/spool/cron"
|
||||
if [ -w "$crondir" ];then
|
||||
[ "$1" = "-l" ] && cat $crondir/$USER 2>/dev/null
|
||||
[ -f "$1" ] && cat $1 > $crondir/$USER
|
||||
else
|
||||
echo "你的设备不支持定时任务配置，脚本大量功能无法启用，请尝试使用搜索引擎查找安装方式！"
|
||||
fi
|
||||
fi
|
||||
}
|
||||
cronset(){
|
||||
# 参数1代表要移除的关键字,参数2代表要添加的任务语句
|
||||
tmpcron=${TMPDIR}/cron_$USER
|
||||
croncmd -l > $tmpcron 2>/dev/null
|
||||
sed -i "/$1/d" $tmpcron
|
||||
sed -i '/^$/d' $tmpcron
|
||||
echo "$2" >> $tmpcron
|
||||
croncmd $tmpcron
|
||||
#华硕/Padavan固件存档在本地,其他则删除
|
||||
[ -d /jffs -o -d /etc/storage/clash -o -d /etc/storage/ShellCrash ] && mv -f $tmpcron ${CRASHDIR}/task/cron || rm -f $tmpcron
|
||||
}
|
||||
set_cron(){
|
||||
[ -z $week ] && week=*
|
||||
[ -z $hour ] && hour=*
|
||||
[ -z $min ] && min=0
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m$cron_time\033[0m执行任务:\033[36m$task_name\033[0m"
|
||||
read -p "是否确认添加定时任务？(1/0) > " res
|
||||
if [ "$res" = '1' ]; then
|
||||
task_txt="$min $hour * * $week $CRASHDIR/task/task.sh $task_id $cron_time$task_name"
|
||||
cronset "$cron_time$task_name" "$task_txt"
|
||||
echo -e "任务【$cron_time$task_name】\033[32m已添加！\033[0m"
|
||||
fi
|
||||
unset week hour min
|
||||
sleep 1
|
||||
}
|
||||
set_service(){
|
||||
# 参数1代表要任务类型,参数2代表任务ID,参数3代表任务描述,参数4代表running任务cron时间
|
||||
task_file=${CRASHDIR}/task/$1
|
||||
[ -s $task_file ] && sed -i "/$3/d" $task_file
|
||||
#运行时每分钟执行的任务特殊处理
|
||||
if [ "$1" = "running" ];then
|
||||
task_txt="$4 $CRASHDIR/task/task.sh $2 $3"
|
||||
echo "$task_txt" >> $task_file
|
||||
[ -n "$(pidof CrashCore)" ] && cronset "$3" "$task_txt"
|
||||
else
|
||||
echo "$CRASHDIR/task/task.sh $2 $3" >> $task_file
|
||||
fi
|
||||
echo -e "任务【$3】\033[32m添加成功！\033[0m"
|
||||
sleep 1
|
||||
}
|
||||
#任务界面
|
||||
task_user_add(){ #自定义命令添加
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m命令可包含空格，请确保命令可执行！\033[0m"
|
||||
echo -e "\033[36m此处不要添加执行条件，请在添加完成后返回添加具体执行条件！\033[0m"
|
||||
echo -e "也可以手动编辑\033[32m${CRASHDIR}/task/task.user\033[0m添加"
|
||||
read -p "请输入命令语句 > " script
|
||||
if [ -n "$script" ];then
|
||||
task_command=$script
|
||||
echo -e "请检查输入：\033[32m$task_command\033[0m"
|
||||
#获取本任务ID
|
||||
task_max_id=$(awk -F '#' '{print $1}' ${CRASHDIR}/task/task.user 2>/dev/null | sort -n | tail -n 1)
|
||||
[ -z "$task_max_id" ] && task_max_id=200
|
||||
task_id=$((task_max_id + 1))
|
||||
read -p "请输入任务备注 > " txt
|
||||
[ -n "$txt" ] && task_name=$txt || task_name=自定义任务$task_id
|
||||
echo "$task_id#$task_command#$task_name" >> ${CRASHDIR}/task/task.user
|
||||
echo -e "\033[32m自定义任务已添加！\033[0m"
|
||||
sleep 1
|
||||
else
|
||||
echo -e "\033[31m输入错误，请重新输入！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
}
|
||||
task_user_del(){ #自定义命令删除
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "请输入对应ID移除对应自定义任务(不会影响内置任务)"
|
||||
echo -e "也可以手动编辑\033[32m${CRASHDIR}/task/task.user\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
cat ${CRASHDIR}/task/task.user 2>/dev/null | grep -Ev '^#' | awk -F '#' '{print $1" "$3}'
|
||||
echo "-----------------------------------------------"
|
||||
echo 0 返回上级菜单
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
if [ -n "$num" ];then
|
||||
sed -i "/^$num#/d" ${CRASHDIR}/task/task.user 2>/dev/null
|
||||
[ "$num" != 0 ] && task_user_del
|
||||
else
|
||||
echo -e "\033[31m输入错误，请重新输入！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
}
|
||||
task_add(){ #任务添加
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m请选择需要添加的任务\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
#输出任务列表
|
||||
cat ${CRASHDIR}/task/task.list ${CRASHDIR}/task/task.user 2>/dev/null | grep -Ev '^(#|$)' | awk -F '#' '{print " "NR" "$3}'
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0)
|
||||
;;
|
||||
[1-9]|[1-9][0-9])
|
||||
if [ "$num" -le "$(cat ${CRASHDIR}/task/task.list ${CRASHDIR}/task/task.user 2>/dev/null | wc -l)" ];then
|
||||
task_id=$(cat ${CRASHDIR}/task/task.list ${CRASHDIR}/task/task.user 2>/dev/null | grep -Ev '^(#|$)' | sed -n "$num p" | awk -F '#' '{print $1}')
|
||||
task_name=$(cat ${CRASHDIR}/task/task.list ${CRASHDIR}/task/task.user 2>/dev/null | grep -Ev '^(#|$)' | sed -n "$num p" | awk -F '#' '{print $3}')
|
||||
task_type
|
||||
else
|
||||
errornum
|
||||
fi
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
task_del(){ #任务删除
|
||||
#删除定时任务
|
||||
croncmd -l > ${TMPDIR}/cron && sed -i "/$1/d" ${TMPDIR}/cron && croncmd ${TMPDIR}/cron
|
||||
rm -f ${TMPDIR}/cron
|
||||
#删除条件任务
|
||||
sed -i "/$1/d" ${CRASHDIR}/task/cron 2>/dev/null
|
||||
sed -i "/$1/d" ${CRASHDIR}/task/bfstart 2>/dev/null
|
||||
sed -i "/$1/d" ${CRASHDIR}/task/afstart 2>/dev/null
|
||||
sed -i "/$1/d" ${CRASHDIR}/task/running 2>/dev/null
|
||||
sed -i "/$1/d" ${CRASHDIR}/task/affirewall 2>/dev/null
|
||||
}
|
||||
task_type(){ #任务条件选择菜单
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "请选择任务\033[36m【$task_name】\033[0m执行条件："
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 定时任务\033[32m每周执行\033[0m"
|
||||
echo -e " 2 定时任务\033[32m每日执行\033[0m"
|
||||
echo -e " 3 定时任务\033[32m每小时执行\033[0m"
|
||||
echo -e " 4 定时任务\033[32m每分钟执行\033[0m"
|
||||
echo -e " 5 服务\033[33m启动前执行\033[0m"
|
||||
echo -e " 6 服务\033[33m启动后执行\033[0m"
|
||||
echo -e " 7 服务\033[33m运行时每分钟执行\033[0m"
|
||||
echo -e " 8 防火墙服务\033[33m重启后执行\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
|
||||
0)
|
||||
return 1
|
||||
;;
|
||||
1)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 输入 1-7 对应\033[33m每周的指定某天\033[0m运行(7=周日)"
|
||||
echo -e " 输入 1,4,0 代表\033[36m每周一、周四、周日\033[0m运行"
|
||||
echo -e " 输入 1-5 代表\033[36m周一至周五\033[0m运行"
|
||||
read -p "在每周哪天执行？ > " week
|
||||
week=`echo ${week/7/0}` #把7换成0
|
||||
echo "-----------------------------------------------"
|
||||
read -p "想在该日的具体哪个小时执行？（0-23） > " hour
|
||||
cron_time="在每周$week的$hour点整"
|
||||
cron_time=`echo ${cron_time/周0/周日}` #把0换成日
|
||||
[ -n "$week" ] && [ -n "$hour" ] && set_cron
|
||||
;;
|
||||
2)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 输入 1,7,15 代表\033[36m每到1,7,15点\033[0m运行"
|
||||
echo -e " 输入 6-18 代表\033[36m早6点至晚18点间每小时\033[0m运行"
|
||||
read -p "想在每日的具体哪个小时执行？（0-23） > " hour
|
||||
echo "-----------------------------------------------"
|
||||
read -p "想在具体哪分钟执行？（0-59的整数） > " min
|
||||
cron_time="在每日的$hour点$min分"
|
||||
[ -n "$min" ] && [ -n "$hour" ] && set_cron
|
||||
;;
|
||||
3)
|
||||
echo "-----------------------------------------------"
|
||||
read -p "想每隔多少小时执行一次？（1-23的整数） > " num
|
||||
hour="*/$num"
|
||||
cron_time="每隔$num小时"
|
||||
[ -n "$hour" ] && set_cron
|
||||
;;
|
||||
4)
|
||||
echo "-----------------------------------------------"
|
||||
read -p "想每隔多少分钟执行一次？（1-59的整数） > " num
|
||||
min="*/$num"
|
||||
cron_time="每隔$num分钟"
|
||||
[ -n "$min" ] && set_cron
|
||||
;;
|
||||
5)
|
||||
set_service bfstart "$task_id" "服务启动前$task_name"
|
||||
;;
|
||||
6)
|
||||
set_service afstart "$task_id" "服务启动后$task_name"
|
||||
;;
|
||||
7)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 输入10即每隔10分钟运行一次，1440即每隔24小时运行一次"
|
||||
echo -e " 大于60分钟的数值将按小时取整,且按当前时区记时"
|
||||
read -p "想每隔多少分钟执行一次？（1-1440的整数） > " num
|
||||
if [ "$num" -lt 60 ];then
|
||||
min="$num"
|
||||
cron_time="*/$min * * * *"
|
||||
time_des="$min分钟"
|
||||
else
|
||||
hour="$((num / 60))"
|
||||
cron_time="0 */$hour * * *"
|
||||
time_des="$hour小时"
|
||||
fi
|
||||
[ -n "$cron_time" ] && set_service running "$task_id" "运行时每$time_des$task_name" "$cron_time"
|
||||
;;
|
||||
8)
|
||||
echo -e "该功能会将相关启动代码注入到/etc/init.d/firewall中"
|
||||
read -p "是否继续？(1/0) > " res
|
||||
[ "$res" = 1 ] && set_service affirewall "$task_id" "防火墙重启后$task_name"
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
return 1
|
||||
;;
|
||||
esac
|
||||
}
|
||||
task_manager(){ #任务管理列表
|
||||
echo "-----------------------------------------------"
|
||||
#抽取并生成临时列表
|
||||
croncmd -l > ${TMPDIR}/task_cronlist
|
||||
cat ${TMPDIR}/task_cronlist ${CRASHDIR}/task/running 2>/dev/null | sort -u | grep -oE "task/task.sh .*" | awk -F ' ' '{print $2" "$3}' > ${TMPDIR}/task_list
|
||||
cat ${CRASHDIR}/task/bfstart ${CRASHDIR}/task/afstart ${CRASHDIR}/task/affirewall 2>/dev/null | awk -F ' ' '{print $2" "$3}' >> ${TMPDIR}/task_list
|
||||
cat ${TMPDIR}/task_cronlist 2>/dev/null | sort -u | grep -oE " #.*" | grep -v "守护" | awk -F '#' '{print "0 旧版任务-"$2}' >> ${TMPDIR}/task_list
|
||||
sed -i '/^ *$/d' ${TMPDIR}/task_list
|
||||
rm -rf ${TMPDIR}/task_cronlist
|
||||
#判断为空则返回
|
||||
if [ ! -s ${TMPDIR}/task_list ];then
|
||||
echo -e "\033[31m当前没有可供管理的任务！\033[36m"
|
||||
sleep 1
|
||||
else
|
||||
echo -e "\033[33m已添加的任务:\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
cat ${TMPDIR}/task_list | awk '{print " " NR " " $2}'
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " a 清空旧版任务"
|
||||
echo -e " d 清空任务列表"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0)
|
||||
;;
|
||||
a)
|
||||
task_del "#"
|
||||
echo -e "\033[31m旧版任务已清空！\033[36m"
|
||||
sleep 1
|
||||
;;
|
||||
d)
|
||||
task_del "task.sh"
|
||||
echo -e "\033[31m全部任务已清空！\033[36m"
|
||||
sleep 1
|
||||
;;
|
||||
[1-9]|[1-9][0-9])
|
||||
|
||||
task_txt=$(sed -n "$num p" ${TMPDIR}/task_list)
|
||||
task_id=$(echo $task_txt | awk '{print $1}')
|
||||
if [ "$task_id" = 0 ];then
|
||||
read -p "旧版任务不支持管理，是否移除?(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
cronname=$(echo $task_txt | awk -F '-' '{print $2}')
|
||||
croncmd -l > $TMPDIR/conf && sed -i "/$cronname/d" $TMPDIR/conf && croncmd $TMPDIR/conf
|
||||
sed -i "/$cronname/d" $clashdir/tools/cron 2>/dev/null
|
||||
rm -f $TMPDIR/conf
|
||||
}
|
||||
else
|
||||
task_des=$(echo $task_txt | awk '{print $2}')
|
||||
task_name=$(cat ${CRASHDIR}/task/task.list ${CRASHDIR}/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $3}')
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "当前任务为：\033[36m $task_des\033[0m"
|
||||
echo -e " 1 \033[33m修改\033[0m当前任务"
|
||||
echo -e " 2 \033[31m删除\033[0m当前任务"
|
||||
echo -e " 3 \033[32m立即执行\033[0m一次"
|
||||
echo -e " 4 查看\033[33m执行记录\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请选择需要执行的操作 > " num
|
||||
case "$num" in
|
||||
0)
|
||||
;;
|
||||
1)
|
||||
task_type && task_del $task_des
|
||||
;;
|
||||
2)
|
||||
task_del $task_des
|
||||
;;
|
||||
3)
|
||||
task_command=$(cat ${CRASHDIR}/task/task.list ${CRASHDIR}/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $2}')
|
||||
eval $task_command && task_res='执行成功！' || task_res='执行失败！'
|
||||
logger "任务【$task_des】$task_res" 33 off
|
||||
sleep 1
|
||||
;;
|
||||
4)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$(cat ${TMPDIR}/ShellCrash.log | grep "$task_name")" ];then
|
||||
cat ${TMPDIR}/ShellCrash.log | grep "$task_name"
|
||||
else
|
||||
echo -e "\033[31m未找到相关执行记录！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
fi
|
||||
task_manager
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
fi
|
||||
}
|
||||
task_recom(){ #任务推荐
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m启用推荐的自动任务配置？这包括：\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "每隔10分钟自动保存面板配置"
|
||||
echo -e "服务启动后自动同步ntp时间"
|
||||
echo -e "在每日的3点0分重启服务"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "是否启用？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
set_service running "106" "运行时每10分钟自动保存面板配置" "*/10 * * * *"
|
||||
set_service afstart "107" "服务启动后自动同步ntp时间"
|
||||
cronset "在每日的3点0分重启服务" "0 3 * * * ${CRASHDIR}/task/task.sh 103 在每日的3点0分重启服务" && \
|
||||
echo -e "任务【在每日的3点0分重启服务】\033[32m添加成功！\033[0m"
|
||||
}
|
||||
}
|
||||
task_menu(){ #任务菜单
|
||||
#检测并创建自定义任务文件
|
||||
[ -f ${CRASHDIR}/task/task.user ] || echo '#任务ID(必须>200并顺序排列)#任务命令#任务说明(#号隔开，任务命令和说明中都不允许包含#号)' > ${CRASHDIR}/task/task.user
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[30;47m欢迎使用自动任务功能：\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 添加\033[32m自动任务\033[0m"
|
||||
echo -e " 2 管理\033[33m任务列表\033[0m"
|
||||
echo -e " 3 查看\033[36m任务日志\033[0m"
|
||||
echo -e " 4 配置\033[36m日志推送\033[0m"
|
||||
echo -e " 5 添加\033[33m自定义任务\033[0m"
|
||||
echo -e " 6 删除\033[33m自定义任务\033[0m"
|
||||
echo -e " 7 使用\033[32m推荐设置\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 返回上级菜单"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0)
|
||||
;;
|
||||
1)
|
||||
task_add
|
||||
task_menu
|
||||
;;
|
||||
2)
|
||||
task_manager
|
||||
rm -rf ${TMPDIR}/task_list
|
||||
task_menu
|
||||
;;
|
||||
3)
|
||||
if [ -n "$(cat ${TMPDIR}/ShellCrash.log | grep '任务【')" ];then
|
||||
echo "-----------------------------------------------"
|
||||
cat ${TMPDIR}/ShellCrash.log | grep '任务【'
|
||||
else
|
||||
echo -e "\033[31m未找到任务相关执行日志！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
task_menu
|
||||
;;
|
||||
4)
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m请在日志工具中配置相关推送通道及推送开关\033[0m"
|
||||
log_pusher
|
||||
task_menu
|
||||
;;
|
||||
5)
|
||||
task_user_add
|
||||
task_menu
|
||||
;;
|
||||
6)
|
||||
task_user_del
|
||||
task_menu
|
||||
;;
|
||||
7)
|
||||
task_recom
|
||||
task_menu
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
|
||||
esac
|
||||
|
||||
}
|
||||
|
||||
case "$1" in
|
||||
menu)
|
||||
task_menu
|
||||
;;
|
||||
[1-9][0-9][0-9])
|
||||
task_command=$(cat ${CRASHDIR}/task/task.list ${CRASHDIR}/task/task.user 2>/dev/null | grep "$1" | awk -F '#' '{print $2}')
|
||||
task_name=$(cat ${CRASHDIR}/task/task.list ${CRASHDIR}/task/task.user 2>/dev/null | grep "$1" | awk -F '#' '{print $3}')
|
||||
#logger "任务$task_name 开始执行"
|
||||
eval $task_command && task_res=成功 || task_res=失败
|
||||
logger "任务【$2】执行$task_res"
|
||||
;;
|
||||
*)
|
||||
$1
|
||||
;;
|
||||
esac
|
||||
884
scripts/menus/tools.sh
Normal file
884
scripts/menus/tools.sh
Normal file
@@ -0,0 +1,884 @@
|
||||
#!/bin/sh
|
||||
# Copyright (C) Juewuy
|
||||
#工具脚本
|
||||
#工具与优化
|
||||
tools() {
|
||||
ssh_tools() {
|
||||
stop_iptables() {
|
||||
iptables -w -t nat -D PREROUTING -p tcp -m multiport --dports $ssh_port -j REDIRECT --to-ports 22 >/dev/null 2>&1
|
||||
ip6tables -w -t nat -A PREROUTING -p tcp -m multiport --dports $ssh_port -j REDIRECT --to-ports 22 >/dev/null 2>&1
|
||||
}
|
||||
[ -n "$(cat /etc/firewall.user 2>&1 | grep '启用外网访问SSH服务')" ] && ssh_ol=禁止 || ssh_ol=开启
|
||||
[ -z "$ssh_port" ] && ssh_port=10022
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m此功能仅针对使用Openwrt系统的设备生效，且不依赖服务\033[0m"
|
||||
echo -e "\033[31m本功能不支持红米AX6S等镜像化系统设备，请勿尝试！\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 \033[32m修改\033[0m外网访问端口：\033[36m$ssh_port\033[0m"
|
||||
echo -e " 2 \033[32m修改\033[0mSSH访问密码(请连续输入2次后回车)"
|
||||
echo -e " 3 \033[33m$ssh_ol\033[0m外网访问SSH"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 返回上级菜单 \033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
read -p "请输入端口号(1000-65535) > " num
|
||||
if [ -z "$num" ]; then
|
||||
errornum
|
||||
elif [ $num -gt 65535 -o $num -le 999 ]; then
|
||||
echo -e "\033[31m输入错误！请输入正确的数值(1000-65535)！\033[0m"
|
||||
elif [ -n "$(netstat -ntul | grep :$num)" ]; then
|
||||
echo -e "\033[31m当前端口已被其他进程占用，请重新输入！\033[0m"
|
||||
else
|
||||
ssh_port=$num
|
||||
setconfig ssh_port $ssh_port
|
||||
sed -i "/启用外网访问SSH服务/d" /etc/firewall.user
|
||||
stop_iptables
|
||||
echo -e "\033[32m设置成功，请重新开启外网访问SSH功能！！！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
ssh_tools
|
||||
;;
|
||||
2)
|
||||
passwd
|
||||
sleep 1
|
||||
ssh_tools
|
||||
;;
|
||||
3)
|
||||
if [ "$ssh_ol" = "开启" ]; then
|
||||
iptables -w -t nat -A PREROUTING -p tcp -m multiport --dports $ssh_port -j REDIRECT --to-ports 22
|
||||
[ -n "$(ckcmd ip6tables)" ] && ip6tables -w -t nat -A PREROUTING -p tcp -m multiport --dports $ssh_port -j REDIRECT --to-ports 22
|
||||
echo "iptables -w -t nat -A PREROUTING -p tcp -m multiport --dports $ssh_port -j REDIRECT --to-ports 22 #启用外网访问SSH服务" >>/etc/firewall.user
|
||||
[ -n "$(ckcmd ip6tables)" ] && echo "ip6tables -w -t nat -A PREROUTING -p tcp -m multiport --dports $ssh_port -j REDIRECT --to-ports 22 #启用外网访问SSH服务" >>/etc/firewall.user
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "已开启外网访问SSH功能！"
|
||||
else
|
||||
sed -i "/启用外网访问SSH服务/d" /etc/firewall.user
|
||||
stop_iptables
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "已禁止外网访问SSH！"
|
||||
fi
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
#获取设置默认显示
|
||||
grep -qE "^\s*[^#].*otapredownload" /etc/crontabs/root >/dev/null 2>&1 && mi_update=禁用 || mi_update=启用
|
||||
[ "$mi_mi_autoSSH" = "已配置" ] && mi_mi_autoSSH_type=32m已配置 || mi_mi_autoSSH_type=31m未配置
|
||||
[ -f "$CRASHDIR"/tools/tun.ko ] && mi_tunfix=32m已启用 || mi_tunfix=31m未启用
|
||||
#
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[30;47m欢迎使用其他工具菜单：\033[0m"
|
||||
echo -e "\033[33m本页工具可能无法兼容全部Linux设备，请酌情使用！\033[0m"
|
||||
echo -e "磁盘占用/所在目录："
|
||||
du -sh "$CRASHDIR"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 ShellCrash\033[33m测试菜单\033[0m"
|
||||
echo -e " 2 ShellCrash\033[32m新手引导\033[0m"
|
||||
echo -e " 3 \033[36m日志及推送工具\033[0m"
|
||||
[ -f /etc/firewall.user ] && echo -e " 4 \033[32m配置\033[0m外网访问SSH"
|
||||
[ -x /usr/sbin/otapredownload ] && echo -e " 5 \033[33m$mi_update\033[0m小米系统自动更新"
|
||||
[ "$systype" = "mi_snapshot" ] && echo -e " 6 小米设备软固化SSH ———— \033[$mi_mi_autoSSH_type \033[0m"
|
||||
[ "$systype" = "mi_snapshot" ] && echo -e " 8 小米设备Tun模块修复 ———— \033[$mi_tunfix \033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 0 返回上级菜单"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
if [ -z "$num" ]; then
|
||||
errornum
|
||||
elif [ "$num" = 0 ]; then
|
||||
i=
|
||||
|
||||
elif [ "$num" = 1 ]; then
|
||||
testcommand
|
||||
|
||||
elif [ "$num" = 2 ]; then
|
||||
userguide
|
||||
|
||||
elif [ "$num" = 3 ]; then
|
||||
log_pusher
|
||||
tools
|
||||
|
||||
elif [ "$num" = 4 ]; then
|
||||
ssh_tools
|
||||
sleep 1
|
||||
tools
|
||||
|
||||
elif [ "$num" = 7 ]; then
|
||||
echo "-----------------------------------------------"
|
||||
if [ ! -f "$CRASHDIR"/tools/ShellDDNS.sh ]; then
|
||||
echo -e "正在获取在线脚本……"
|
||||
"$CRASHDIR"/start.sh get_bin "$TMPDIR"/ShellDDNS.sh tools/ShellDDNS.sh
|
||||
if [ "$?" = "0" ]; then
|
||||
mv -f "$TMPDIR"/ShellDDNS.sh "$CRASHDIR"/tools/ShellDDNS.sh
|
||||
. "$CRASHDIR"/tools/ShellDDNS.sh
|
||||
else
|
||||
echo -e "\033[31m文件下载失败！\033[0m"
|
||||
fi
|
||||
else
|
||||
. "$CRASHDIR"/tools/ShellDDNS.sh
|
||||
fi
|
||||
sleep 1
|
||||
tools
|
||||
|
||||
elif [ -x /usr/sbin/otapredownload ] && [ "$num" = 5 ]; then
|
||||
if [ "$mi_update" = "禁用" ]; then
|
||||
grep -q "otapredownload" /etc/crontabs/root &&
|
||||
sed -i "/^[^\#]*otapredownload/ s/^/#/" /etc/crontabs/root ||
|
||||
echo "#15 3,4,5 * * * /usr/sbin/otapredownload >/dev/null 2>&1" >>/etc/crontabs/root
|
||||
else
|
||||
grep -q "otapredownload" /etc/crontabs/root &&
|
||||
sed -i "/^\s*#.*otapredownload/ s/^\s*#//" /etc/crontabs/root ||
|
||||
echo "15 3,4,5 * * * /usr/sbin/otapredownload >/dev/null 2>&1" >>/etc/crontabs/root
|
||||
fi
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "已\033[33m$mi_update\033[0m小米路由器的自动更新，如未生效，请在官方APP中同步设置！"
|
||||
sleep 1
|
||||
tools
|
||||
|
||||
elif [ "$num" = 6 ]; then
|
||||
if [ "$systype" = "mi_snapshot" ]; then
|
||||
mi_autoSSH
|
||||
else
|
||||
echo "不支持的设备！"
|
||||
fi
|
||||
tools
|
||||
elif [ "$num" = 8 ]; then
|
||||
if [ -f "$CRASHDIR"/tools/tun.ko ]; then
|
||||
read -p "是否禁用此功能并移除相关补丁？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
rm -rf "$CRASHDIR"/tools/tun.ko
|
||||
echo -e "\033[33m补丁文件已移除，请立即重启设备以防止出错！\033[0m"
|
||||
}
|
||||
elif ckcmd modinfo && [ -z "$(modinfo tun)" ]; then
|
||||
echo -e "\033[33m本功能需要修改系统文件，不保证没有任何风险！\033[0m"
|
||||
echo -e "\033[33m本功能采集的Tun模块并不一定适用于你的设备！\033[0m"
|
||||
sleep 1
|
||||
read -p "我已知晓，出现问题会自行承担！(1/0) > " res
|
||||
if [ "$res" = 1 ]; then
|
||||
echo "-----------------------------------------------"
|
||||
echo "正在连接服务器获取Tun模块补丁文件…………"
|
||||
"$CRASHDIR"/start.sh get_bin "$TMPDIR"/tun.ko bin/fix/tun.ko
|
||||
if [ "$?" = "0" ]; then
|
||||
mv -f "$TMPDIR"/tun.ko "$CRASHDIR"/tools/tun.ko &&
|
||||
"$CRASHDIR"/misnap_init.sh tunfix &&
|
||||
echo -e "\033[32m设置成功！请重启服务！\033[0m"
|
||||
else
|
||||
echo -e "\033[31m文件下载失败，请重试！\033[0m"
|
||||
fi
|
||||
fi
|
||||
else
|
||||
echo -e "\033[31m当前设备无需设置，请勿尝试！\033[0m"
|
||||
sleep 1
|
||||
fi
|
||||
tools
|
||||
else
|
||||
errornum
|
||||
fi
|
||||
}
|
||||
|
||||
mi_autoSSH() {
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m本功能使用软件命令进行固化不保证100%成功！\033[0m"
|
||||
echo -e "\033[33m如有问题请加群反馈：\033[36;4mhttps://t.me/ShellClash\033[0m"
|
||||
read -p "请输入需要还原的SSH密码(不影响当前密码,回车可跳过) > " mi_mi_autoSSH_pwd
|
||||
mi_mi_autoSSH=已配置
|
||||
cp -f /etc/dropbear/dropbear_rsa_host_key "$CRASHDIR"/configs/dropbear_rsa_host_key 2>/dev/null
|
||||
cp -f /etc/dropbear/authorized_keys "$CRASHDIR"/configs/authorized_keys 2>/dev/null
|
||||
ckcmd nvram && {
|
||||
nvram set ssh_en=1
|
||||
nvram set telnet_en=1
|
||||
nvram set uart_en=1
|
||||
nvram set boot_wait=on
|
||||
nvram commit
|
||||
}
|
||||
echo -e "\033[32m设置成功！\033[0m"
|
||||
setconfig mi_mi_autoSSH $mi_mi_autoSSH
|
||||
setconfig mi_mi_autoSSH_pwd $mi_mi_autoSSH_pwd
|
||||
sleep 1
|
||||
}
|
||||
#日志菜单
|
||||
log_pusher() {
|
||||
[ -n "$push_TG" ] && stat_TG=32m已启用 || stat_TG=33m未启用
|
||||
[ -n "$push_Deer" ] && stat_Deer=32m已启用 || stat_Deer=33m未启用
|
||||
[ -n "$push_bark" ] && stat_bark=32m已启用 || stat_bark=33m未启用
|
||||
[ -n "$push_Po" ] && stat_Po=32m已启用 || stat_Po=33m未启用
|
||||
[ -n "$push_PP" ] && stat_PP=32m已启用 || stat_PP=33m未启用
|
||||
[ -n "$push_SynoChat" ] && stat_SynoChat=32m已启用 || stat_SynoChat=33m未启用
|
||||
[ -n "$push_Gotify" ] && stat_Gotify=32m已启用 || stat_Gotify=33m未启用
|
||||
[ "$task_push" = 1 ] && stat_task=32m已启用 || stat_task=33m未启用
|
||||
[ -n "$device_name" ] && device_s=32m$device_name || device_s=33m未设置
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 Telegram推送 ——\033[$stat_TG\033[0m"
|
||||
echo -e " 2 PushDeer推送 ——\033[$stat_Deer\033[0m"
|
||||
echo -e " 3 Bark推送-IOS ——\033[$stat_bark\033[0m"
|
||||
echo -e " 4 Passover推送 ——\033[$stat_Po\033[0m"
|
||||
echo -e " 5 PushPlus推送 ——\033[$stat_PP\033[0m"
|
||||
echo -e " 6 SynoChat推送 ——\033[$stat_SynoChat\033[0m"
|
||||
echo -e " 7 Gotify推送 ——\033[$stat_Gotify\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " a 查看\033[36m运行日志\033[0m"
|
||||
echo -e " b 推送任务日志 ——\033[$stat_task\033[0m"
|
||||
echo -e " c 设置设备名称 ——\033[$device_s\033[0m"
|
||||
echo -e " d 清空日志文件"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
a)
|
||||
if [ -s "$TMPDIR"/ShellCrash.log ]; then
|
||||
echo "-----------------------------------------------"
|
||||
cat "$TMPDIR"/ShellCrash.log
|
||||
exit 0
|
||||
else
|
||||
echo -e "\033[31m未找到相关日志！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
;;
|
||||
1)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$push_TG" ]; then
|
||||
read -p "确认关闭TG日志推送？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
push_TG=
|
||||
chat_ID=
|
||||
setconfig push_TG
|
||||
setconfig chat_ID
|
||||
}
|
||||
else
|
||||
#echo -e "\033[33m详细设置指南请参考 https://juewuy.github.io/ \033[0m"
|
||||
private_bot() {
|
||||
echo -e "请先通过 \033[32;4mhttps://t.me/BotFather\033[0m 申请TG机器人并获取其\033[36mAPI TOKEN\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你获取到的API TOKEN > " TOKEN
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "请向\033[32m你申请的机器人\033[33m而不是BotFather！\033[0m"
|
||||
url_tg=https://api.telegram.org/bot${TOKEN}/getUpdates
|
||||
}
|
||||
public_bot() {
|
||||
echo -e "请向机器人：\033[32;4mhttps://t.me/ShellCrashtg_bot\033[0m"
|
||||
TOKEN=publictoken
|
||||
url_tg=https://tgbot.jwsc.eu.org/publictoken/getUpdates
|
||||
}
|
||||
set_bot() {
|
||||
echo -e "发送此秘钥: \033[30;46m$public_key\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "我已经发送完成(1/0) > " res
|
||||
if [ "$res" = 1 ]; then
|
||||
[ -n "$authentication" ] && auth="$authentication@"
|
||||
export https_proxy="http://${auth}127.0.0.1:$mix_port"
|
||||
if curl --version >/dev/null 2>&1; then
|
||||
chat=$(curl -kfsSl $url_tg 2>/dev/null)
|
||||
else
|
||||
chat=$(wget -Y on -q -O - $url_tg)
|
||||
fi
|
||||
[ -n "$chat" ] && chat_ID=$(echo $chat | sed 's/"update_id":/{\n"update_id":/g' | grep "$public_key" | head -n1 | grep -oE '"id":.*,"is_bot' | sed s'/"id"://' | sed s'/,"is_bot//')
|
||||
[ -z "$chat_ID" ] && {
|
||||
echo -e "\033[31m无法获取对话ID，请返回重新设置或手动输入ChatID！\033[0m"
|
||||
echo -e "通常访问 \033[32;4m$url_tg\033[0m \n\033[36m即可看到ChatID\033[0m"
|
||||
read -p "请手动输入ChatID > " chat_ID
|
||||
}
|
||||
if echo "$chat_ID" | grep -qE '^[0-9]{8,}$'; then
|
||||
push_TG=$TOKEN
|
||||
setconfig push_TG $TOKEN
|
||||
setconfig chat_ID $chat_ID
|
||||
"$CRASHDIR"/start.sh logger "已完成Telegram日志推送设置！" 32
|
||||
else
|
||||
echo -e "\033[31m无法获取对话ID，请重新配置！\033[0m"
|
||||
sleep 1
|
||||
chose_bot
|
||||
fi
|
||||
fi
|
||||
}
|
||||
chose_bot() {
|
||||
public_key=$(cat /proc/sys/kernel/random/boot_id | sed 's/.*-//')
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 使用公共机器人 ——不依赖内核服务"
|
||||
echo -e " 2 使用私人机器人 ——需要额外申请"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case $num in
|
||||
1)
|
||||
public_bot
|
||||
set_bot
|
||||
;;
|
||||
2)
|
||||
private_bot
|
||||
set_bot
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
chose_bot
|
||||
fi
|
||||
sleep 1
|
||||
log_pusher
|
||||
;;
|
||||
2)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$push_Deer" ]; then
|
||||
read -p "确认关闭PushDeer日志推送？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
push_Deer=
|
||||
setconfig push_Deer
|
||||
}
|
||||
else
|
||||
#echo -e "\033[33m详细设置指南请参考 https://juewuy.github.io/ \033[0m"
|
||||
echo -e "请先前往 \033[32;4mhttp://www.pushdeer.com/official.html\033[0m 扫码安装快应用或下载APP"
|
||||
echo -e "打开快应用/APP，并完成登陆"
|
||||
echo -e "\033[33m切换到「设备」标签页，点击右上角的加号，注册当前设备\033[0m"
|
||||
echo -e "\033[36m切换到「秘钥」标签页，点击右上角的加号，创建一个秘钥，并复制\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你复制的秘钥 > " url
|
||||
if [ -n "$url" ]; then
|
||||
push_Deer=$url
|
||||
setconfig push_Deer $url
|
||||
"$CRASHDIR"/start.sh logger "已完成PushDeer日志推送设置！" 32
|
||||
else
|
||||
echo -e "\033[31m输入错误，请重新输入！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
fi
|
||||
log_pusher
|
||||
;;
|
||||
3)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$push_bark" ]; then
|
||||
read -p "确认关闭Bark日志推送？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
push_bark=
|
||||
bark_param=
|
||||
setconfig push_bark
|
||||
setconfig bark_param
|
||||
}
|
||||
else
|
||||
#echo -e "\033[33m详细设置指南请参考 https://juewuy.github.io/ \033[0m"
|
||||
echo -e "\033[33mBark推送仅支持IOS系统，其他平台请使用其他推送方式！\033[0m"
|
||||
echo -e "\033[32m请安装Bark-IOS客户端，并在客户端中找到专属推送链接\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你的Bark推送链接 > " url
|
||||
if [ -n "$url" ]; then
|
||||
push_bark=$url
|
||||
setconfig push_bark $url
|
||||
"$CRASHDIR"/start.sh logger "已完成Bark日志推送设置！" 32
|
||||
else
|
||||
echo -e "\033[31m输入错误，请重新输入！\033[0m"
|
||||
fi
|
||||
sleep 1
|
||||
fi
|
||||
log_pusher
|
||||
;;
|
||||
4)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$push_Po" ]; then
|
||||
read -p "确认关闭Pushover日志推送？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
push_Po=
|
||||
push_Po_key=
|
||||
setconfig push_Po
|
||||
setconfig push_Po_key
|
||||
}
|
||||
else
|
||||
#echo -e "\033[33m详细设置指南请参考 https://juewuy.github.io/ \033[0m"
|
||||
echo -e "请先通过 \033[32;4mhttps://pushover.net/\033[0m 注册账号并获取\033[36mUser Key\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你的User Key > " key
|
||||
if [ -n "$key" ]; then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m请检查注册邮箱，完成账户验证\033[0m"
|
||||
read -p "我已经验证完成(1/0) > "
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "请通过 \033[32;4mhttps://pushover.net/apps/build\033[0m 生成\033[36mAPI Token\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你的API Token > " Token
|
||||
if [ -n "$Token" ]; then
|
||||
push_Po=$Token
|
||||
push_Po_key=$key
|
||||
setconfig push_Po $Token
|
||||
setconfig push_Po_key $key
|
||||
"$CRASHDIR"/start.sh logger "已完成Passover日志推送设置！" 32
|
||||
else
|
||||
echo -e "\033[31m输入错误，请重新输入！\033[0m"
|
||||
fi
|
||||
else
|
||||
echo -e "\033[31m输入错误，请重新输入！\033[0m"
|
||||
fi
|
||||
fi
|
||||
sleep 1
|
||||
log_pusher
|
||||
;;
|
||||
5)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$push_PP" ]; then
|
||||
read -p "确认关闭PushPlus日志推送？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
push_PP=
|
||||
setconfig push_PP
|
||||
}
|
||||
else
|
||||
#echo -e "\033[33m详细设置指南请参考 https://juewuy.github.io/ \033[0m"
|
||||
echo -e "请先通过 \033[32;4mhttps://www.pushplus.plus/push1.html\033[0m 注册账号并获取\033[36mtoken\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你的token > " Token
|
||||
if [ -n "$Token" ]; then
|
||||
push_PP=$Token
|
||||
setconfig push_PP $Token
|
||||
"$CRASHDIR"/start.sh logger "已完成PushPlus日志推送设置！" 32
|
||||
else
|
||||
echo -e "\033[31m输入错误，请重新输入！\033[0m"
|
||||
fi
|
||||
fi
|
||||
sleep 1
|
||||
log_pusher
|
||||
;;
|
||||
6)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$push_SynoChat" ]; then
|
||||
read -p "确认关闭SynoChat日志推送？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
push_SynoChat=
|
||||
setconfig push_SynoChat
|
||||
}
|
||||
else
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你的Synology DSM主页地址 > " URL
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你的Synology Chat Token > " TOKEN
|
||||
echo "-----------------------------------------------"
|
||||
echo -e '请通过"你的群晖地址/webapi/entry.cgi?api=SYNO.Chat.External&method=user_list&version=2&token=你的TOKEN"获取user_id'
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你的user_id > " USERID
|
||||
if [ -n "$URL" ]; then
|
||||
push_SynoChat=$USERID
|
||||
setconfig push_SynoChat $USERID
|
||||
setconfig push_ChatURL $URL
|
||||
setconfig push_ChatTOKEN $TOKEN
|
||||
setconfig push_ChatUSERID $USERID
|
||||
"$CRASHDIR"/start.sh logger "已完成SynoChat日志推送设置！" 32
|
||||
else
|
||||
echo -e "\033[31m输入错误，请重新输入！\033[0m"
|
||||
setconfig push_ChatURL
|
||||
setconfig push_ChatTOKEN
|
||||
setconfig push_ChatUSERID
|
||||
push_SynoChat=
|
||||
setconfig push_SynoChat
|
||||
fi
|
||||
fi
|
||||
sleep 1
|
||||
log_pusher
|
||||
;;
|
||||
# 在menu.sh的case $num in代码块中添加
|
||||
7)
|
||||
echo "-----------------------------------------------"
|
||||
if [ -n "$push_Gotify" ]; then
|
||||
read -p "确认关闭Gotify日志推送？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
push_Gotify=
|
||||
setconfig push_Gotify
|
||||
}
|
||||
else
|
||||
echo -e "请先通过Gotify服务器获取推送URL"
|
||||
echo -e "格式示例: https://gotify.example.com/message?token=你的应用令牌"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入你的Gotify推送URL > " url
|
||||
if [ -n "$url" ]; then
|
||||
push_Gotify=$url
|
||||
setconfig push_Gotify "$url"
|
||||
"$CRASHDIR"/start.sh logger "已完成Gotify日志推送设置！" 32
|
||||
else
|
||||
echo -e "\033[31m输入错误，请重新输入！\033[0m"
|
||||
fi
|
||||
fi
|
||||
sleep 1
|
||||
log_pusher
|
||||
;;
|
||||
b)
|
||||
[ "$task_push" = 1 ] && task_push='' || task_push=1
|
||||
setconfig task_push $task_push
|
||||
sleep 1
|
||||
log_pusher
|
||||
;;
|
||||
c)
|
||||
read -p "请输入本设备自定义推送名称 > " device_name
|
||||
setconfig device_name $device_name
|
||||
sleep 1
|
||||
log_pusher
|
||||
;;
|
||||
d)
|
||||
echo -e "\033[33m运行日志及任务日志均已清空！\033[0m"
|
||||
rm -rf "$TMPDIR"/ShellCrash.log
|
||||
sleep 1
|
||||
log_pusher
|
||||
;;
|
||||
*) errornum ;;
|
||||
esac
|
||||
}
|
||||
#新手引导
|
||||
userguide(){
|
||||
|
||||
forwhat(){
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[30;46m 欢迎使用ShellCrash新手引导！ \033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m请先选择你的使用环境： \033[0m"
|
||||
echo -e "\033[0m(你之后依然可以在设置中更改各种配置)\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 \033[32m路由设备配置局域网透明代理\033[0m"
|
||||
echo -e " 2 \033[36mLinux设备仅配置本机代理\033[0m"
|
||||
[ -f "$CFG_PATH.bak" ] && echo -e " 3 \033[33m还原之前备份的设置\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
1)
|
||||
#设置运行模式
|
||||
redir_mod="混合模式"
|
||||
[ -n "$(echo $cputype | grep -E "linux.*mips.*")" ] && {
|
||||
if grep -qE '^TPROXY$' /proc/net/ip_tables_targets || modprobe xt_TPROXY >/dev/null 2>&1; then
|
||||
redir_mod="Tproxy模式"
|
||||
else
|
||||
redir_mod="Redir模式"
|
||||
fi
|
||||
}
|
||||
setconfig crashcore "meta"
|
||||
setconfig redir_mod "$redir_mod"
|
||||
setconfig dns_mod mix
|
||||
setconfig firewall_area '1'
|
||||
#默认启用绕过CN-IP
|
||||
setconfig cn_ip_route 已开启
|
||||
#自动识别IPV6
|
||||
[ -n "$(ip a 2>&1 | grep -w 'inet6' | grep -E 'global' | sed 's/.*inet6.//g' | sed 's/scope.*$//g')" ] && {
|
||||
setconfig ipv6_redir 已开启
|
||||
setconfig ipv6_support 已开启
|
||||
setconfig ipv6_dns 已开启
|
||||
setconfig cn_ipv6_route 已开启
|
||||
}
|
||||
#设置开机启动
|
||||
[ -f /etc/rc.common -a "$(cat /proc/1/comm)" = "procd" ] && /etc/init.d/shellcrash enable
|
||||
ckcmd systemctl && [ "$(cat /proc/1/comm)" = "systemd" ] && systemctl enable shellcrash.service > /dev/null 2>&1
|
||||
rm -rf "$CRASHDIR"/.dis_startup
|
||||
autostart=enable
|
||||
#检测IP转发
|
||||
if [ "$(cat /proc/sys/net/ipv4/ip_forward)" = "0" ];then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m检测到你的设备尚未开启ip转发，局域网设备将无法正常连接网络，是否立即开启？\033[0m"
|
||||
read -p "是否开启？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf
|
||||
sysctl -w net.ipv4.ip_forward=1
|
||||
} && echo "已成功开启ipv4转发，如未正常开启，请手动重启设备！" || echo "开启失败！请自行谷歌查找当前设备的开启方法！"
|
||||
fi
|
||||
#禁止docker启用的net.bridge.bridge-nf-call-iptables
|
||||
sysctl -w net.bridge.bridge-nf-call-iptables=0 > /dev/null 2>&1
|
||||
sysctl -w net.bridge.bridge-nf-call-ip6tables=0 > /dev/null 2>&1
|
||||
;;
|
||||
2)
|
||||
setconfig redir_mod "Redir模式"
|
||||
[ -n "$(echo $cputype | grep -E "linux.*mips.*")" ] && setconfig crashcore "clash"
|
||||
setconfig common_ports "未开启"
|
||||
setconfig firewall_area '2'
|
||||
;;
|
||||
3)
|
||||
mv -f $CFG_PATH.bak $CFG_PATH
|
||||
echo -e "\033[32m脚本设置已还原！\033[0m"
|
||||
echo -e "\033[33m请重新启动脚本！\033[0m"
|
||||
exit 0
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
forwhat
|
||||
;;
|
||||
esac
|
||||
}
|
||||
forwhat
|
||||
#检测小内存模式
|
||||
dir_size=$(dir_avail "$CRASHDIR")
|
||||
if [ "$dir_size" -lt 10240 ];then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m检测到你的安装目录空间不足10M，是否开启小闪存模式？\033[0m"
|
||||
echo -e "\033[0m开启后核心及数据库文件将被下载到内存中，这将占用一部分内存空间\033[0m"
|
||||
echo -e "\033[0m每次开机后首次运行服务时都会自动的重新下载相关文件\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "是否开启？(1/0) > " res
|
||||
[ "$res" = 1 ] && {
|
||||
BINDIR=/tmp/ShellCrash
|
||||
setconfig BINDIR /tmp/ShellCrash "$CRASHDIR"/configs/command.env
|
||||
}
|
||||
fi
|
||||
#检测及下载根证书
|
||||
openssldir="$(openssl version -d 2>&1 | awk -F '"' '{print $2}')"
|
||||
[ ! -d "$openssldir/certs" ] && openssldir=/etc/ssl
|
||||
if [ -d $openssldir/certs -a ! -f $openssldir/certs/ca-certificates.crt ];then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m当前设备未找到根证书文件\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "是否下载并安装根证书？(1/0) > " res
|
||||
[ "$res" = 1 ] && checkupdate && getcrt
|
||||
fi
|
||||
#设置加密DNS
|
||||
if [ -s $openssldir/certs/ca-certificates.crt ];then
|
||||
dns_nameserver='https://dns.alidns.com/dns-query, https://doh.pub/dns-query'
|
||||
dns_fallback='https://cloudflare-dns.com/dns-query, https://dns.google/dns-query, https://doh.opendns.com/dns-query'
|
||||
dns_resolver='https://223.5.5.5/dns-query, 2400:3200::1'
|
||||
setconfig dns_nameserver "'$dns_nameserver'"
|
||||
setconfig dns_fallback "'$dns_fallback'"
|
||||
setconfig dns_resolver "'$dns_resolver'"
|
||||
fi
|
||||
#开启公网访问
|
||||
sethost(){
|
||||
read -p "请输入你的公网IP地址 > " host
|
||||
echo $host | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}'
|
||||
if [ -z "$host" ];then
|
||||
echo -e "\033[31m请输入正确的IP地址！\033[0m"
|
||||
sethost
|
||||
fi
|
||||
}
|
||||
if ckcmd systemctl;then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m是否开启公网访问Dashboard面板及socks服务？\033[0m"
|
||||
echo -e "注意当前设备必须有公网IP才能从公网正常访问"
|
||||
echo -e "\033[31m此功能会增加暴露风险请谨慎使用！\033[0m"
|
||||
echo -e "vps设备可能还需要额外在服务商后台开启相关端口"
|
||||
read -p "现在开启？(1/0) > " res
|
||||
if [ "$res" = 1 ];then
|
||||
read -p "请先设置面板访问秘钥 > " secret
|
||||
read -p "请先修改Socks服务端口(1-65535) > " mix_port
|
||||
read -p "请先设置Socks服务密码(账号默认为crash) > " sec
|
||||
[ -z "$sec" ] && authentication=crash:$sec
|
||||
host=$(curl ip.sb 2>/dev/null | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}')
|
||||
if [ -z "$host" ];then
|
||||
sethost
|
||||
fi
|
||||
public_support=已开启
|
||||
setconfig secret $secret
|
||||
setconfig mix_port $mix_port
|
||||
setconfig host $host
|
||||
setconfig public_support $public_support
|
||||
setconfig authentication "'$authentication'"
|
||||
fi
|
||||
fi
|
||||
#启用推荐的自动任务配置
|
||||
. "$CRASHDIR"/task/task.sh && task_recom
|
||||
#小米设备软固化
|
||||
if [ "$systype" = "mi_snapshot" ];then
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[33m检测到为小米路由设备，启用软固化可防止路由升级后丢失SSH\033[0m"
|
||||
read -p "是否启用软固化功能？(1/0) > " res
|
||||
[ "$res" = 1 ] && mi_autoSSH
|
||||
fi
|
||||
#提示导入订阅或者配置文件
|
||||
[ ! -s "$CRASHDIR"/yamls/config.yaml -a ! -s "$CRASHDIR"/jsons/config.json ] && {
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[32m是否导入配置文件？\033[0m(这是运行前的最后一步)"
|
||||
echo -e "\033[0m你必须拥有一份配置文件才能运行服务！\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "现在开始导入？(1/0) > " res
|
||||
[ "$res" = 1 ] && inuserguide=1 && {
|
||||
if [ -f "$CRASHDIR"/v2b_api.sh ];then
|
||||
. "$CRASHDIR"/v2b_api.sh
|
||||
else
|
||||
set_core_config
|
||||
fi
|
||||
set_core_config
|
||||
inuserguide=""
|
||||
}
|
||||
}
|
||||
#回到主界面
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m很好！现在只需要执行启动就可以愉快的使用了！\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
read -p "立即启动服务？(1/0) > " res
|
||||
[ "$res" = 1 ] && start_core && sleep 2
|
||||
main_menu
|
||||
}
|
||||
#测试菜单
|
||||
testcommand(){
|
||||
echo "$crashcore" | grep -q 'singbox' && config_path=${JSONSDIR}/config.json || config_path=${YAMLSDIR}/config.yaml
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[30;47m这里是测试命令菜单\033[0m"
|
||||
echo -e "\033[33m如遇问题尽量运行相应命令后截图提交issue或TG讨论组\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo " 1 Debug模式运行内核"
|
||||
echo " 2 查看系统DNS端口(:53)占用 "
|
||||
echo " 3 测试ssl加密(aes-128-gcm)跑分"
|
||||
echo " 4 查看ShellCrash相关路由规则"
|
||||
echo " 5 查看内核配置文件前40行"
|
||||
echo " 6 测试代理服务器连通性(google.tw)"
|
||||
echo "-----------------------------------------------"
|
||||
echo " 0 返回上级目录！"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0)
|
||||
main_menu
|
||||
;;
|
||||
1)
|
||||
debug
|
||||
testcommand
|
||||
;;
|
||||
2)
|
||||
echo "-----------------------------------------------"
|
||||
netstat -ntulp |grep 53
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "可以使用\033[44m netstat -ntulp |grep xxx \033[0m来查询任意(xxx)端口"
|
||||
exit;
|
||||
;;
|
||||
3)
|
||||
echo "-----------------------------------------------"
|
||||
openssl speed -multi 4 -evp aes-128-gcm
|
||||
echo "-----------------------------------------------"
|
||||
exit;
|
||||
;;
|
||||
4)
|
||||
if [ "$firewall_mod" = "nftables" ];then
|
||||
nft list table inet shellcrash
|
||||
else
|
||||
[ "$firewall_area" = 1 -o "$firewall_area" = 3 -o "$firewall_area" = 5 -o "$vm_redir" = "已开启" ] && {
|
||||
echo "----------------Redir+DNS---------------------"
|
||||
iptables -t nat -L PREROUTING --line-numbers
|
||||
iptables -t nat -L shellcrash_dns --line-numbers
|
||||
[ -n "$(echo $redir_mod | grep -E 'Redir模式|混合模式')" ] && iptables -t nat -L shellcrash --line-numbers
|
||||
[ -n "$(echo $redir_mod | grep -E 'Tproxy模式|混合模式|Tun模式')" ] && {
|
||||
echo "----------------Tun/Tproxy-------------------"
|
||||
iptables -t mangle -L PREROUTING --line-numbers
|
||||
iptables -t mangle -L shellcrash_mark --line-numbers
|
||||
}
|
||||
}
|
||||
[ "$firewall_area" = 2 -o "$firewall_area" = 3 ] && {
|
||||
echo "-------------OUTPUT-Redir+DNS----------------"
|
||||
iptables -t nat -L OUTPUT --line-numbers
|
||||
iptables -t nat -L shellcrash_dns_out --line-numbers
|
||||
[ -n "$(echo $redir_mod | grep -E 'Redir模式|混合模式')" ] && iptables -t nat -L shellcrash_out --line-numbers
|
||||
[ -n "$(echo $redir_mod | grep -E 'Tproxy模式|混合模式|Tun模式')" ] && {
|
||||
echo "------------OUTPUT-Tun/Tproxy---------------"
|
||||
iptables -t mangle -L OUTPUT --line-numbers
|
||||
iptables -t mangle -L shellcrash_mark_out --line-numbers
|
||||
}
|
||||
}
|
||||
[ "$ipv6_redir" = "已开启" ] && {
|
||||
[ "$firewall_area" = 1 -o "$firewall_area" = 3 ] && {
|
||||
ip6tables -t nat -L >/dev/null 2>&1 && {
|
||||
echo "-------------IPV6-Redir+DNS-------------------"
|
||||
ip6tables -t nat -L PREROUTING --line-numbers
|
||||
ip6tables -t nat -L shellcrashv6_dns --line-numbers
|
||||
[ -n "$(echo $redir_mod | grep -E 'Redir模式|混合模式')" ] && ip6tables -t nat -L shellcrashv6 --line-numbers
|
||||
}
|
||||
[ -n "$(echo $redir_mod | grep -E 'Tproxy模式|混合模式|Tun模式')" ] && {
|
||||
echo "-------------IPV6-Tun/Tproxy------------------"
|
||||
ip6tables -t mangle -L PREROUTING --line-numbers
|
||||
ip6tables -t mangle -L shellcrashv6_mark --line-numbers
|
||||
}
|
||||
}
|
||||
}
|
||||
[ "$vm_redir" = "已开启" ] && {
|
||||
echo "-------------vm-Redir-------------------"
|
||||
iptables -t nat -L shellcrash_vm --line-numbers
|
||||
iptables -t nat -L shellcrash_vm_dns --line-numbers
|
||||
}
|
||||
fi
|
||||
exit;
|
||||
;;
|
||||
5)
|
||||
echo "-----------------------------------------------"
|
||||
sed -n '1,40p' ${config_path}
|
||||
echo "-----------------------------------------------"
|
||||
exit;
|
||||
;;
|
||||
6)
|
||||
echo "注意：依赖curl(不支持wget)，且测试结果不保证一定准确！"
|
||||
delay=`curl -kx ${authentication}@127.0.0.1:$mix_port -o /dev/null -s -w '%{time_starttransfer}' 'https://google.tw' & { sleep 3 ; kill $! >/dev/null 2>&1 & }` > /dev/null 2>&1
|
||||
delay=`echo |awk "{print $delay*1000}"` > /dev/null 2>&1
|
||||
echo "-----------------------------------------------"
|
||||
if [ `echo ${#delay}` -gt 1 ];then
|
||||
echo -e "\033[32m连接成功！响应时间为："$delay" ms\033[0m"
|
||||
else
|
||||
echo -e "\033[31m连接超时！请重试或检查节点配置！\033[0m"
|
||||
fi
|
||||
main_menu
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
main_menu
|
||||
;;
|
||||
esac
|
||||
}
|
||||
debug(){
|
||||
echo "$crashcore" | grep -q 'singbox' && config_tmp="$TMPDIR"/jsons || config_tmp="$TMPDIR"/config.yaml
|
||||
echo "-----------------------------------------------"
|
||||
echo -e "\033[36m注意：Debug运行均会停止原本的内核服务\033[0m"
|
||||
echo -e "后台运行日志地址：\033[32m$TMPDIR/debug.log\033[0m"
|
||||
echo -e "如长时间运行后台监测，日志等级推荐error！防止文件过大！"
|
||||
echo -e "你也可以通过：\033[33mcrash -s debug 'warning'\033[0m 命令使用其他日志等级"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 1 仅测试\033[32m$config_tmp\033[0m配置文件可用性"
|
||||
echo -e " 2 前台运行\033[32m$config_tmp\033[0m配置文件,不配置防火墙劫持(\033[33m使用Ctrl+C手动停止\033[0m)"
|
||||
echo -e " 3 后台运行完整启动流程,并配置防火墙劫持,日志等级:\033[31merror\033[0m"
|
||||
echo -e " 4 后台运行完整启动流程,并配置防火墙劫持,日志等级:\033[32minfo\033[0m"
|
||||
echo -e " 5 后台运行完整启动流程,并配置防火墙劫持,日志等级:\033[33mdebug\033[0m"
|
||||
echo -e " 6 后台运行完整启动流程,并配置防火墙劫持,且将错误日志打印到闪存：\033[32m$CRASHDIR/debug.log\033[0m"
|
||||
echo "-----------------------------------------------"
|
||||
echo -e " 8 后台运行完整启动流程,输出执行错误并查找上下文,之后关闭进程"
|
||||
[ -s "$TMPDIR"/jsons/inbounds.json ] && echo -e " 9 将\033[32m$config_tmp\033[0m下json文件合并为$TMPDIR/debug.json"
|
||||
echo "-----------------------------------------------"
|
||||
echo " 0 返回上级目录！"
|
||||
read -p "请输入对应数字 > " num
|
||||
case "$num" in
|
||||
0) ;;
|
||||
1)
|
||||
"$CRASHDIR"/start.sh stop
|
||||
"$CRASHDIR"/start.sh bfstart
|
||||
if echo "$crashcore" | grep -q 'singbox' ;then
|
||||
"$TMPDIR"/CrashCore run -D "$BINDIR" -C "$TMPDIR"/jsons &
|
||||
{ sleep 4 ; kill $! >/dev/null 2>&1 & }
|
||||
wait
|
||||
else
|
||||
"$TMPDIR"/CrashCore -t -d "$BINDIR" -f "$TMPDIR"/config.yaml
|
||||
fi
|
||||
rm -rf "$TMPDIR"/CrashCore
|
||||
echo "-----------------------------------------------"
|
||||
exit
|
||||
;;
|
||||
2)
|
||||
"$CRASHDIR"/start.sh stop
|
||||
"$CRASHDIR"/start.sh bfstart
|
||||
"$COMMAND"
|
||||
rm -rf "$TMPDIR"/CrashCore
|
||||
echo "-----------------------------------------------"
|
||||
exit
|
||||
;;
|
||||
3)
|
||||
"$CRASHDIR"/start.sh debug error
|
||||
main_menu
|
||||
;;
|
||||
4)
|
||||
"$CRASHDIR"/start.sh debug info
|
||||
main_menu
|
||||
;;
|
||||
5)
|
||||
"$CRASHDIR"/start.sh debug debug
|
||||
main_menu
|
||||
;;
|
||||
6)
|
||||
echo -e "频繁写入闪存会导致闪存寿命降低，如非遇到会导致设备死机或重启的bug，请勿使用此功能！"
|
||||
read -p "是否继续？(1/0) > " res
|
||||
[ "$res" = 1 ] && "$CRASHDIR"/start.sh debug debug flash
|
||||
main_menu
|
||||
;;
|
||||
8)
|
||||
$0 -d
|
||||
main_menu
|
||||
;;
|
||||
9)
|
||||
"$CRASHDIR"/start.sh core_check && "$TMPDIR"/CrashCore merge "$TMPDIR"/debug.json -C "$TMPDIR"/jsons && echo -e "\033[32m合并成功！\033[0m"
|
||||
rm -rf "$TMPDIR"/CrashCore
|
||||
main_menu
|
||||
;;
|
||||
*)
|
||||
errornum
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
1079
scripts/menus/upgrade.sh
Normal file
1079
scripts/menus/upgrade.sh
Normal file
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user