~改为统一使用ON/OFF来表示功能开启关闭状态

2026-03-10 23:41:22 +00:00 · 2026-01-07 10:16:39 +08:00
parent 098a70c067
commit f46cdade4d
18 changed files with 127 additions and 132 deletions
--- a/scripts/menus/2_settings.sh
+++ b/scripts/menus/2_settings.sh
@@ -6,8 +6,8 @@ __IS_MODULE_2_SETTINGS_LOADED=1

 settings() { #功能设置
    #获取设置默认显示
-    [ -z "$skip_cert" ] && skip_cert=已开启
-	[ -z "$sniffer" ] && sniffer=未启用
+    [ -z "$skip_cert" ] && skip_cert=ON
+	[ -z "$sniffer" ] && sniffer=OFF
 	[ -z "$dns_mod" ] && dns_mod='redir_host'
    #
    echo "-----------------------------------------------"
@@ -53,19 +53,19 @@ settings() { #功能设置
 	;;
    4)
        echo "-----------------------------------------------"
-        if [ "$skip_cert" = "未开启" ] >/dev/null 2>&1; then
+        if [ "$skip_cert" = "OFF" ] >/dev/null 2>&1; then
            echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
-            skip_cert=已开启
+            skip_cert=ON
        else
            echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
-            skip_cert=未开启
+            skip_cert=OFF
        fi
        setconfig skip_cert $skip_cert
        settings
 	;;
    5)
        echo "-----------------------------------------------"
-        if [ "$sniffer" = "未启用" ]; then
+        if [ "$sniffer" = "OFF" ]; then
            if [ "$crashcore" = "clash" ]; then
                rm -rf ${TMPDIR}/CrashCore
                rm -rf "$CRASHDIR"/CrashCore
@@ -74,11 +74,11 @@ settings() { #功能设置
                setconfig crashcore $crashcore
                echo "已将ShellCrash内核切换为Meta内核！域名嗅探依赖Meta或者高版本clashpre内核！"
            fi
-            sniffer=已启用
+            sniffer=ON
        elif [ "$crashcore" = "clashpre" -a "$dns_mod" = "redir_host" ]; then
            echo -e "\033[31m使用clashpre内核且开启redir-host模式时无法关闭！\033[0m"
        else
-            sniffer=未启用
+            sniffer=OFF
        fi
        setconfig sniffer $sniffer
        settings
@@ -283,11 +283,11 @@ set_redir_mod() { #路由模式设置
    esac
 }
 set_fw_filter(){ #流量过滤
-	[ -z "$common_ports" ] && common_ports=已开启
-	[ -z "$quic_rj" ] && quic_rj=未开启
-    [ -z "$cn_ip_route" ] && cn_ip_route=未开启	
+	[ -z "$common_ports" ] && common_ports=ON
+	[ -z "$quic_rj" ] && quic_rj=OFF
+    [ -z "$cn_ip_route" ] && cn_ip_route=OFF	
 	touch "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter
-	[ -z "$(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null)" ] && mac_return=未开启 || mac_return=已启用
+	[ -z "$(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null)" ] && mac_return=OFF || mac_return=ON
 	echo "-----------------------------------------------"
    echo -e " 1 过滤非常用端口： 	\033[36m$common_ports\033[0m   ————用于过滤P2P流量"
    echo -e " 2 过滤局域网设备：	\033[36m$mac_return\033[0m   ————使用黑/白名单进行过滤"
@@ -304,7 +304,7 @@ set_fw_filter(){ #流量过滤
 	;;
    1)
        set_common_ports() {
-            if [ "$common_ports" = "未开启" ]; then
+            if [ "$common_ports" = "OFF" ]; then
                echo -e "\033[33m当前代理端口为：【$multiport】\033[0m"
                echo -e "\033[31m注意，MIX模式下，非常用端口的域名连接将不受影响！！\033[0m"
                read -p "是否修改默认端口？(1/0) > " res
@@ -312,11 +312,11 @@ set_fw_filter(){ #流量过滤
                    read -p "请输入自定义端口,注意用小写逗号分隔 > " text
                    [ -n "$text" ] && setconfig multiport $text && echo -e "\033[33m已设为代理【$multiport】端口！！\033[0m"
                }
-                common_ports=已开启
+                common_ports=ON
                sleep 1
            else
                echo -e "\033[33m已设为代理全部端口！！\033[0m"
-                common_ports=未开启
+                common_ports=OFF
            fi
            setconfig common_ports $common_ports
        }
@@ -341,12 +341,12 @@ set_fw_filter(){ #流量过滤
    3)
        echo "-----------------------------------------------"
        if [ -n "$(echo "$redir_mod" | grep -oE '混合|Tproxy|Tun')" ]; then
-            if [ "$quic_rj" = "未开启" ]; then
+            if [ "$quic_rj" = "OFF" ]; then
                echo -e "\033[33m已禁止QUIC流量通过ShellCrash内核！！\033[0m"
-                quic_rj=已启用
+                quic_rj=ON
            else
                echo -e "\033[33m已取消禁止QUIC协议流量！！\033[0m"
-                quic_rj=未开启
+                quic_rj=OFF
            fi
            setconfig quic_rj $quic_rj
        else
@@ -357,14 +357,14 @@ set_fw_filter(){ #流量过滤
 	;;
    4)
        if [ -n "$(ipset -v 2>/dev/null)" ] || [ "$firewall_mod" = 'nftables' ]; then
-            if [ "$cn_ip_route" = "未开启" ]; then
+            if [ "$cn_ip_route" = "OFF" ]; then
                echo -e "\033[32m已开启CN_IP绕过内核功能！！\033[0m"
                echo -e "\033[31m注意！！！此功能会导致全局模式及一切CN相关规则失效！！！\033[0m"
-                cn_ip_route=已开启
+                cn_ip_route=ON
                sleep 2
            else
                echo -e "\033[33m已禁用CN_IP绕过内核功能！！\033[0m"
-                cn_ip_route=未开启
+                cn_ip_route=OFF
            fi
            setconfig cn_ip_route $cn_ip_route
        else
@@ -401,7 +401,7 @@ set_fw_filter(){ #流量过滤
 }

 set_cust_host_ipv4() { #自定义ipv4透明路由网段
-	[ -z "$replace_default_host_ipv4" ] && replace_default_host_ipv4="未启用"
+	[ -z "$replace_default_host_ipv4" ] && replace_default_host_ipv4="OFF"
 	echo "-----------------------------------------------"
 	echo -e "当前默认透明路由的网段为: \033[32m$(ip a 2>&1 | grep -w 'inet' | grep 'global' | grep 'br' | grep -v 'iot' | grep -E ' 1(92|0|72)\.' | sed 's/.*inet.//g' | sed 's/br.*$//g' | sed 's/metric.*$//g' | tr '\n' ' ' && echo) \033[0m"
 	echo -e "当前已添加的自定义网段为:\033[36m$cust_host_ipv4\033[0m"
@@ -412,10 +412,10 @@ set_cust_host_ipv4() { #自定义ipv4透明路由网段
 	read -p "请输入对应的序号或需要额外添加的网段 > " text
 	case "$text" in
 	2)
-		if [ "$replace_default_host_ipv4" == "未启用" ]; then
-			replace_default_host_ipv4="已启用"
+		if [ "$replace_default_host_ipv4" == "OFF" ]; then
+			replace_default_host_ipv4="ON"
 		else
-			replace_default_host_ipv4="未启用"
+			replace_default_host_ipv4="OFF"
 		fi
 		setconfig replace_default_host_ipv4 "$replace_default_host_ipv4"
 		set_cust_host_ipv4
@@ -678,7 +678,7 @@ set_adv_config() { #端口设置
            setconfig authentication
            echo 密码已移除！
        else
-            if [ "$local_proxy" = "已开启" -a "$local_type" = "环境变量" ]; then
+            if [ "$local_proxy" = "ON" -a "$local_type" = "环境变量" ]; then
                echo "-----------------------------------------------"
                echo -e "\033[33m请先禁用本机劫持功能或使用增强模式！\033[0m"
                sleep 1
@@ -724,7 +724,7 @@ set_adv_config() { #端口设置
        read -p "请输入需要指定劫持的端口 > " multiport
        if [ -n "$multiport" ]; then
            [ "$multiport" = "0" ] && multiport="22,80,143,194,443,465,587,853,993,995,5222,8080,8443"
-            common_ports=已开启
+            common_ports=ON
            setconfig multiport "$multiport"
            setconfig common_ports "$common_ports"
            echo -e "\033[32m设置成功！！！\033[0m"
@@ -769,7 +769,7 @@ set_adv_config() { #端口设置
    esac
 }
 set_firewall_area() { #路由范围设置
-    [ -z "$vm_redir" ] && vm_redir='未开启'
+    [ -z "$vm_redir" ] && vm_redir='OFF'
    echo "-----------------------------------------------"
    echo -e "\033[31m注意：\033[0m基于桥接网卡的Docker/虚拟机流量，请单独启用！"
    echo -e "\033[33m如你使用了第三方DNS如smartdns等，请勿启用本机劫持或使用shellcrash用户执行！\033[0m"
@@ -837,7 +837,7 @@ set_firewall_vm(){
 	case "$num" in
 	1)
 		if [ -n "$vm_ipv4" ]; then
-			vm_redir=已开启
+			vm_redir=ON
 		else
 			echo -e "\033[33m请先运行容器再运行脚本或者手动设置网段\033[0m"
 		fi
@@ -846,10 +846,10 @@ set_firewall_vm(){
 		echo -e "多个网段请用空格连接，可运行容器后使用【ip route】命令查看网段地址"
 		echo -e "示例：\033[32m10.88.0.0/16 172.17.0.0/16\033[0m"
 		read -p "请输入自定义网段 > " text
-		[ -n "$text" ] && vm_ipv4=$text && vm_redir=已开启
+		[ -n "$text" ] && vm_ipv4=$text && vm_redir=ON
 	;;
 	3)
-		vm_redir=未开启
+		vm_redir=OFF
 		unset vm_ipv4
 	;;
 	*) ;;
@@ -858,8 +858,8 @@ set_firewall_vm(){
 	setconfig vm_ipv4 "'$vm_ipv4'"
 }
 set_ipv6() { #ipv6设置
-    [ -z "$ipv6_redir" ] && ipv6_redir=未开启
-    [ -z "$ipv6_dns" ] && ipv6_dns=已开启
+    [ -z "$ipv6_redir" ] && ipv6_redir=OFF
+    [ -z "$ipv6_dns" ] && ipv6_dns=ON
    echo "-----------------------------------------------"
    echo -e " 1 ipv6透明路由:  \033[36m$ipv6_redir\033[0m  ——劫持ipv6流量"
    [ "$disoverride" != "1" ] && echo -e " 2 ipv6-DNS解析:  \033[36m$ipv6_dns\033[0m  ——决定内置DNS是否返回ipv6地址"
@@ -869,19 +869,19 @@ set_ipv6() { #ipv6设置
    case "$num" in
    0) ;;
    1)
-        if [ "$ipv6_redir" = "未开启" ]; then
-            ipv6_support=已开启
-            ipv6_redir=已开启
+        if [ "$ipv6_redir" = "OFF" ]; then
+            ipv6_support=ON
+            ipv6_redir=ON
            sleep 2
        else
-            ipv6_redir=未开启
+            ipv6_redir=OFF
        fi
        setconfig ipv6_redir $ipv6_redir
        setconfig ipv6_support $ipv6_support
        set_ipv6
 	;;
    2)
-        [ "$ipv6_dns" = "未开启" ] && ipv6_dns=已开启 || ipv6_dns=未开启
+        [ "$ipv6_dns" = "OFF" ] && ipv6_dns=ON || ipv6_dns=OFF
        setconfig ipv6_dns $ipv6_dns
        set_ipv6
 	;;
--- a/scripts/menus/4_setboot.sh
+++ b/scripts/menus/4_setboot.sh
@@ -20,11 +20,11 @@ disable_autostart(){
 }

 setboot() { #启动设置菜单
-    [ -z "$start_old" ] && start_old=未开启
+    [ -z "$start_old" ] && start_old=OFF
    [ -z "$start_delay" -o "$start_delay" = 0 ] && delay=未设置 || delay="${start_delay}秒"
    check_autostart && auto_set="\033[33m禁止" || auto_set="\033[32m允许"
-    [ "${BINDIR}" = "$CRASHDIR" ] && mini_clash=未开启 || mini_clash=已开启
-    [ -z "$network_check" ] && network_check=已开启
+    [ "${BINDIR}" = "$CRASHDIR" ] && mini_clash=OFF || mini_clash=ON
+    [ -z "$network_check" ] && network_check=ON
    echo "-----------------------------------------------"
    echo -e "\033[30;47m欢迎使用启动设置菜单：\033[0m"
    echo "-----------------------------------------------"
@@ -53,17 +53,17 @@ setboot() { #启动设置菜单
        setboot
 	;;
    2)
-        if [ "$start_old" = "未开启" ] >/dev/null 2>&1; then
+        if [ "$start_old" = "OFF" ] >/dev/null 2>&1; then
            echo -e "\033[33m改为使用保守模式启动服务！！\033[0m"
            disable_autostart
-            start_old=已开启
+            start_old=ON
            setconfig start_old "$start_old"
            "$CRASHDIR"/start.sh stop
        else
            if grep -qE 'procd|systemd|s6' /proc/1/comm || rc-status -r >/dev/null 2>&1; then
                echo -e "\033[32m改为使用系统守护进程启动服务！！\033[0m"
                "$CRASHDIR"/start.sh cronset "ShellCrash初始化"
-                start_old=未开启
+                start_old=OFF
                setconfig start_old "$start_old"
                "$CRASHDIR"/start.sh stop

@@ -93,10 +93,10 @@ setboot() { #启动设置菜单
 	;;
    4)
        dir_size=$(df "$CRASHDIR" | awk '{ for(i=1;i<=NF;i++){ if(NR==1){ arr[i]=$i; }else{ arr[i]=arr[i]" "$i; } } } END{ for(i=1;i<=NF;i++){ print arr[i]; } }' | grep Ava | awk '{print $2}')
-        if [ "$mini_clash" = "未开启" ]; then
+        if [ "$mini_clash" = "OFF" ]; then
            if [ "$dir_size" -gt 20480 ]; then
                echo -e "\033[33m您的设备空间充足(>20M)，无需开启！\033[0m"
-            elif [ "$start_old" != '已开启' -a "$(cat /proc/1/comm)" = "systemd" ]; then
+            elif [ "$start_old" != 'ON' -a "$(cat /proc/1/comm)" = "systemd" ]; then
                echo -e "\033[33m不支持systemd启动模式，请先启用保守模式！\033[0m"
            else
                [ "$BINDIR" = "$CRASHDIR" ] && BINDIR="$TMPDIR"
@@ -165,10 +165,10 @@ setboot() { #启动设置菜单
        echo -e "\033[32m启用时，会导致部分性能较差或者拨号较慢的设备可能会因查询超时导致启动失败！\033[0m"
        read -p "是否切换？(1/0) > " res
        [ "$res" = '1' ] && {
-            if [ "$network_check" = "已禁用" ]; then
-                network_check=已启用
+            if [ "$network_check" = "OFF" ]; then
+                network_check=ON
            else
-                network_check=已禁用
+                network_check=OFF
            fi
            setconfig network_check "$network_check"
        }
--- a/scripts/menus/6_core_config.sh
+++ b/scripts/menus/6_core_config.sh
@@ -122,13 +122,13 @@ setrules(){ #自定义规则
 	;;
 	4)
 		echo "-----------------------------------------------"
-		if [ "$proxies_bypass" = "未启用" ];then
+		if [ "$proxies_bypass" = "OFF" ];then
 			echo -e "\033[33m本功能会自动将当前配置文件中的节点域名或IP设置为直连规则以防止出现双重流量！\033[0m"
 			echo -e "\033[33m请确保下游设备使用的节点与ShellCrash中使用的节点相同，否则无法生效！\033[0m"
 			read -p "启用节点绕过？(1/0) > " res
-			[ "$res" = "1" ] && proxies_bypass=已启用
+			[ "$res" = "1" ] && proxies_bypass=ON
 		else
-			proxies_bypass=未启用
+			proxies_bypass=OFF
 		fi
 		setconfig proxies_bypass $proxies_bypass
 		sleep 1
@@ -322,13 +322,13 @@ setproxies(){ #自定义clash节点
 	;;
 	4)
 		echo "-----------------------------------------------"
-		if [ "$proxies_bypass" = "未启用" ];then
+		if [ "$proxies_bypass" = "OFF" ];then
 			echo -e "\033[33m本功能会自动将当前配置文件中的节点域名或IP设置为直连规则以防止出现双重流量！\033[0m"
 			echo -e "\033[33m请确保下游设备使用的节点与ShellCrash中使用的节点相同，否则无法生效！\033[0m"
 			read -p "启用节点绕过？(1/0) > " res
-			[ "$res" = "1" ] && proxies_bypass=已启用
+			[ "$res" = "1" ] && proxies_bypass=ON
 		else
-			proxies_bypass=未启用
+			proxies_bypass=OFF
 		fi
 		setconfig proxies_bypass $proxies_bypass
 		sleep 1
@@ -363,7 +363,7 @@ gen_clash_providers(){ #生成clash的providers配置文件
      interval: 600
 EOF
 		[ "$crashcore" = 'meta' ] && {
-		[ "$skip_cert" != "未开启" ] && skip_cert_verify='skip-cert-verify: true'
+		[ "$skip_cert" != "OFF" ] && skip_cert_verify='skip-cert-verify: true'
 		cat >> $TMPDIR/providers/providers.yaml <<EOF
    override:
      udp: true
@@ -453,7 +453,7 @@ EOF
 EOF
 		fi
 		#通用部分生成
-		[ "$skip_cert" != "未开启" ] && override_tls='true' || override_tls='false'
+		[ "$skip_cert" != "OFF" ] && override_tls='true' || override_tls='false'
 		cat >> "$TMPDIR"/providers/providers.json <<EOF
      "health_check": {
        "enabled": true,
--- a/scripts/menus/8_tools.sh
+++ b/scripts/menus/8_tools.sh
@@ -83,7 +83,7 @@ tools() {
 	    #获取设置默认显示
 	    grep -qE "^\s*[^#].*otapredownload" /etc/crontabs/root >/dev/null 2>&1 && mi_update=禁用 || mi_update=启用
 	    [ "$mi_mi_autoSSH" = "已配置" ] && mi_mi_autoSSH_type=32m已配置 || mi_mi_autoSSH_type=31m未配置
-	    [ -f "$CRASHDIR"/tools/tun.ko ] && mi_tunfix=32m已启用 || mi_tunfix=31m未启用
+	    [ -f "$CRASHDIR"/tools/tun.ko ] && mi_tunfix=32mON || mi_tunfix=31mOFF
 	
 	    echo "-----------------------------------------------"
 	    echo -e "\033[30;47m欢迎使用其他工具菜单：\033[0m"
@@ -222,14 +222,14 @@ mi_autoSSH() {
 #日志菜单
 log_pusher() {
 	while true; do
-	    [ -n "$push_TG" ] && stat_TG=32m已启用 || stat_TG=33m未启用
-	    [ -n "$push_Deer" ] && stat_Deer=32m已启用 || stat_Deer=33m未启用
-	    [ -n "$push_bark" ] && stat_bark=32m已启用 || stat_bark=33m未启用
-	    [ -n "$push_Po" ] && stat_Po=32m已启用 || stat_Po=33m未启用
-	    [ -n "$push_PP" ] && stat_PP=32m已启用 || stat_PP=33m未启用
-	    [ -n "$push_SynoChat" ] && stat_SynoChat=32m已启用 || stat_SynoChat=33m未启用
-	    [ -n "$push_Gotify" ] && stat_Gotify=32m已启用 || stat_Gotify=33m未启用
-	    [ "$task_push" = 1 ] && stat_task=32m已启用 || stat_task=33m未启用
+	    [ -n "$push_TG" ] && stat_TG=32mON || stat_TG=33mOFF
+	    [ -n "$push_Deer" ] && stat_Deer=32mON || stat_Deer=33mOFF
+	    [ -n "$push_bark" ] && stat_bark=32mON || stat_bark=33mOFF
+	    [ -n "$push_Po" ] && stat_Po=32mON || stat_Po=33mOFF
+	    [ -n "$push_PP" ] && stat_PP=32mON || stat_PP=33mOFF
+	    [ -n "$push_SynoChat" ] && stat_SynoChat=32mON || stat_SynoChat=33mOFF
+	    [ -n "$push_Gotify" ] && stat_Gotify=32mON || stat_Gotify=33mOFF
+	    [ "$task_push" = 1 ] && stat_task=32mON || stat_task=33mOFF
 	    [ -n "$device_name" ] && device_s=32m$device_name || device_s=33m未设置
 	    echo "-----------------------------------------------"
 	    echo -e " 1 Telegram推送	——\033[$stat_TG\033[0m"
@@ -537,7 +537,7 @@ testcommand(){
 		if [ "$firewall_mod" = "nftables" ];then
 			nft list table inet shellcrash | sed '/set cn_ip {/,/}/d;/set cn_ip6 {/,/}/d;/^[[:space:]]*}/d'
 		else
-			[ "$firewall_area" = 1 -o "$firewall_area" = 3 -o "$firewall_area" = 5 -o "$vm_redir" = "已开启" ] && {
+			[ "$firewall_area" = 1 -o "$firewall_area" = 3 -o "$firewall_area" = 5 -o "$vm_redir" = "ON" ] && {
 				echo "----------------Redir+DNS---------------------"
 				iptables -t nat -L PREROUTING --line-numbers
 				iptables -t nat -L shellcrash_dns --line-numbers
@@ -559,7 +559,7 @@ testcommand(){
 					iptables -t mangle -L shellcrash_mark_out --line-numbers
 				}
 			}
-			[ "$ipv6_redir" = "已开启" ] && {
+			[ "$ipv6_redir" = "ON" ] && {
 				[ "$firewall_area" = 1 -o "$firewall_area" = 3 ] && {
 					ip6tables -t nat -L >/dev/null 2>&1 && {
 						echo "-------------IPV6-Redir+DNS-------------------"
@@ -574,7 +574,7 @@ testcommand(){
 					}
 				}
 			}
-			[ "$vm_redir" = "已开启" ] && {
+			[ "$vm_redir" = "ON" ] && {
 						echo "-------------vm-Redir-------------------"
 						iptables -t nat -L shellcrash_vm --line-numbers
 						iptables -t nat -L shellcrash_vm_dns --line-numbers
@@ -717,13 +717,13 @@ userguide(){
 			setconfig dns_mod mix
 			setconfig firewall_area '1'
 			#默认启用绕过CN-IP
-			setconfig cn_ip_route 已开启
+			setconfig cn_ip_route ON
 			#自动识别IPV6
 			[ -n "$(ip a 2>&1 | grep -w 'inet6' | grep -E 'global' | sed 's/.*inet6.//g' | sed 's/scope.*$//g')" ] && {
-				setconfig ipv6_redir 已开启
-				setconfig ipv6_support 已开启
-				setconfig ipv6_dns 已开启
-				setconfig cn_ipv6_route 已开启
+				setconfig ipv6_redir ON
+				setconfig ipv6_support ON
+				setconfig ipv6_dns ON
+				setconfig cn_ipv6_route ON
 			}
 			#设置开机启动
 			[ -f /etc/rc.common -a "$(cat /proc/1/comm)" = "procd" ] && /etc/init.d/shellcrash enable
@@ -747,7 +747,7 @@ userguide(){
 		2)
 			setconfig redir_mod "Redir模式"
 			[ -n "$(echo $cputype | grep -E "linux.*mips.*")" ] && setconfig crashcore "clash"
-			setconfig common_ports "未开启"
+			setconfig common_ports "OFF"
 			setconfig firewall_area '2'
 		    ;;
 		3)