~1.9.5alpha13 pkg

bin/version

@@ -1,4 +1,4 @@
 meta_v=v1.19.17
 singboxr_v=1.13.0-alpha.27
-versionsh=1.9.5alpha12
+versionsh=1.9.5alpha13
 GeoIP_v=20251205

scripts/lang/chs/2_settings.lang

@@ -4,7 +4,8 @@
 SET_MENU_TITLE="功能设置菜单"
 SET_MENU_REDIR="路由模式设置："
 SET_MENU_DNS="DNS设置：    "
-SET_MENU_FW_FILTER="透明路由流量过滤"
+SET_MENU_FW_FILTER="透明路由流量过滤："
+SET_MENU_FW_FILTER_DESC="端口、设备、协议或列表"
 SET_MENU_SKIP_CERT="跳过证书验证："
 SET_MENU_SNIFFER="启用域名嗅探："
 SET_MENU_ADV_PORT="自定义端口及密钥"

scripts/lang/chs/7_gateway.lang

@@ -1,4 +1,4 @@
-GW_TITLE="访问与控制菜单"
+GW_TITLE="访问与控制菜单"
 GW_WARN="注意："
 GW_FW_VPS_HINT="如在vps运行，还需在vps安全策略对相关端口同时放行"
 GW_FW_PORT_LIMIT="最多支持设置放行10个端口，请先减少一些！"

scripts/lang/chs/8_tools.lang

@@ -11,9 +11,11 @@ TOOLS_ENABLE="启用"
 TOOLS_CONFIGURED="已配置"
 TOOLS_SSH_ONLY_OPENWRT="此功能仅针对使用Openwrt系统的设备生效，且不依赖服务"
 TOOLS_SSH_UNSUPPORTED_SYSTEM="本功能不支持红米AX6S等镜像化系统设备，请勿尝试！"
-TOOLS_SSH_PORT_ITEM="1) \033[32m修改\033[0m外网访问端口：\033[36m$ssh_port\033[0m"
+TOOLS_SSH_PORT_ITEM_PREFIX="1) \033[32m修改\033[0m外网访问端口："
+TOOLS_SSH_PORT_ITEM_SUFFIX=""
 TOOLS_SSH_PASS_ITEM="2) \033[32m修改\033[0mSSH访问密码(请连续输入2次后回车)"
-TOOLS_SSH_TOGGLE_ITEM="3) \033[33m$ssh_ol\033[0m外网访问SSH"
+TOOLS_SSH_TOGGLE_ITEM_PREFIX="3) "
+TOOLS_SSH_TOGGLE_ITEM_SUFFIX="外网访问SSH"
 TOOLS_PROMPT_PORT="请输入端口号(1000-65535)> "
 TOOLS_WARN_COMPAT="本页工具可能无法兼容全部Linux设备，请酌情使用！"
 TOOLS_DISK_USAGE="磁盘占用/所在目录："
@@ -21,10 +23,14 @@ TOOLS_MENU_TEST_ITEM="1) ShellCrash\033[33m测试菜单\033[0m"
 TOOLS_MENU_GUIDE_ITEM="2) ShellCrash\033[32m新手引导\033[0m"
 TOOLS_MENU_LOG_ITEM="3) \033[36m日志及推送工具\033[0m"
 TOOLS_MENU_SSH_ITEM="4) \033[32m配置\033[0m外网访问SSH"
-TOOLS_MENU_MI_UPDATE_ITEM="5) \033[33m$mi_update\033[0m小米系统自动更新"
+TOOLS_MENU_MI_UPDATE_ITEM_PREFIX="5) "
-TOOLS_MENU_MI_AUTO_SSH_ITEM="6) 小米设备软固化SSH —— \033[$mi_mi_autoSSH_type \033[0m"
+TOOLS_MENU_MI_UPDATE_ITEM_SUFFIX="小米系统自动更新"
-TOOLS_MENU_MI_TUN_FIX_ITEM="8) 小米设备Tun模块修复 —— \033[$mi_tunfix \033[0m"
+TOOLS_MENU_MI_AUTO_SSH_ITEM_PREFIX="6) 小米设备软固化SSH —— "
-TOOLS_MI_UPDATE_MSG="已\033[33m$mi_update\033[0m小米路由器的自动更新，如未生效，请在官方APP中同步设置！"
+TOOLS_MENU_MI_AUTO_SSH_ITEM_SUFFIX=""
+TOOLS_MENU_MI_TUN_FIX_ITEM_PREFIX="8) 小米设备Tun模块修复 —— "
+TOOLS_MENU_MI_TUN_FIX_ITEM_SUFFIX=""
+TOOLS_MI_UPDATE_MSG_PREFIX="已"
+TOOLS_MI_UPDATE_MSG_SUFFIX="小米路由器的自动更新，如未生效，请在官方APP中同步设置！"
 TOOLS_UNSUPPORTED_DEVICE="不支持的设备！"
 TOOLS_FETCHING_SCRIPT="正在获取在线脚本......"
 TOOLS_DOWNLOAD_FAIL="文件下载失败！"
@@ -46,16 +52,25 @@ TOOLS_AUTO_SSH_WARN2="如有问题请加群反馈："
 TOOLS_AUTO_SSH_PWD_HINT1="请输入需要还原的SSH密码（不影响当前密码）"
 TOOLS_AUTO_SSH_PWD_HINT2="（回车可跳过）"
 TOOLS_AUTO_SSH_INPUT="请输入> "
-TOOLS_LOG_TG="1) Telegram推送\t——\033[$stat_TG\033[0m"
+TOOLS_LOG_TG_PREFIX="1) Telegram推送\t——"
-TOOLS_LOG_DEER="2) PushDeer推送\t——\033[$stat_Deer\033[0m"
+TOOLS_LOG_TG_SUFFIX=""
-TOOLS_LOG_BARK="3) Bark推送-IOS\t——\033[$stat_bark\033[0m"
+TOOLS_LOG_DEER_PREFIX="2) PushDeer推送\t——"
-TOOLS_LOG_PO="4) Passover推送\t——\033[$stat_Po\033[0m"
+TOOLS_LOG_DEER_SUFFIX=""
-TOOLS_LOG_PP="5) PushPlus推送\t——\033[$stat_PP\033[0m"
+TOOLS_LOG_BARK_PREFIX="3) Bark推送-IOS\t——"
-TOOLS_LOG_SYNO="6) SynoChat推送\t——\033[$stat_SynoChat\033[0m"
+TOOLS_LOG_BARK_SUFFIX=""
-TOOLS_LOG_GOTIFY="7) Gotify推送\t        ——\033[$stat_Gotify\033[0m"
+TOOLS_LOG_PO_PREFIX="4) Passover推送\t——"
+TOOLS_LOG_PO_SUFFIX=""
+TOOLS_LOG_PP_PREFIX="5) PushPlus推送\t——"
+TOOLS_LOG_PP_SUFFIX=""
+TOOLS_LOG_SYNO_PREFIX="6) SynoChat推送\t——"
+TOOLS_LOG_SYNO_SUFFIX=""
+TOOLS_LOG_GOTIFY_PREFIX="7) Gotify推送\t        ——"
+TOOLS_LOG_GOTIFY_SUFFIX=""
 TOOLS_LOG_VIEW="a) 查看\033[36m运行日志\033[0m"
-TOOLS_LOG_TASK="b) 推送任务日志\t——\033[$stat_task\033[0m"
+TOOLS_LOG_TASK_PREFIX="b) 推送任务日志\t——"
-TOOLS_LOG_DEVICE="c) 设置设备名称\t——\033[$device_s\033[0m"
+TOOLS_LOG_TASK_SUFFIX=""
+TOOLS_LOG_DEVICE_PREFIX="c) 设置设备名称\t——"
+TOOLS_LOG_DEVICE_SUFFIX=""
 TOOLS_LOG_CLEAR="d) 清空日志文件"
 TOOLS_CONFIRM_CLOSE_TG="是否确认关闭TG日志推送？"
 TOOLS_CONFIRM_CLOSE_DEER="是否确认关闭PushDeer日志推送？"
@@ -120,17 +135,22 @@ TOOLS_PROXY_NOTE="注意：依赖curl（不支持wget），且测试结果不保
 TOOLS_PROXY_OK="连接成功！响应时间为："
 TOOLS_PROXY_TIMEOUT="连接超时！请重试或检查节点配置！"
 TOOLS_DEBUG_WARN1="注意：Debug运行均会停止原本的内核服务"
-TOOLS_DEBUG_WARN2="后台运行日志地址：\033[32m$TMPDIR/debug.log\033[0m"
+TOOLS_DEBUG_WARN2_PREFIX="后台运行日志地址："
+TOOLS_DEBUG_WARN2_SUFFIX=""
 TOOLS_DEBUG_WARN3="如长时间运行后台监测，日志等级推荐error！防止文件过大！"
 TOOLS_DEBUG_WARN4="你亦可通过：\033[33mcrash -s debug 'warning'\033[0m命令使用其他日志等级"
-TOOLS_DEBUG_ITEM_1="1) 仅测试\033[32m$config_tmp\033[0m配置文件可用性"
+TOOLS_DEBUG_ITEM_1_PREFIX="1) 仅测试"
-TOOLS_DEBUG_ITEM_2="2) 前台运行\033[32m$config_tmp\033[0m配置文件，不配置防火墙劫持(\033[33m使用Ctrl+C手动停止\033[0m)"
+TOOLS_DEBUG_ITEM_1_SUFFIX="配置文件可用性"
+TOOLS_DEBUG_ITEM_2_PREFIX="2) 前台运行"
+TOOLS_DEBUG_ITEM_2_SUFFIX="配置文件，不配置防火墙劫持(使用Ctrl+C手动停止)"
 TOOLS_DEBUG_ITEM_3="3) 后台运行完整启动流程并配置防火墙劫持，日志等级：\033[31merror\033[0m"
 TOOLS_DEBUG_ITEM_4="4) 后台运行完整启动流程并配置防火墙劫持，日志等级：\033[32minfo\033[0m"
 TOOLS_DEBUG_ITEM_5="5) 后台运行完整启动流程并配置防火墙劫持，日志等级：\033[33mdebug\033[0m"
-TOOLS_DEBUG_ITEM_6="6) 后台运行完整启动流程并配置防火墙劫持，且将错误日志打印到闪存：\033[32m$CRASHDIR/debug.log\033[0m"
+TOOLS_DEBUG_ITEM_6_PREFIX="6) 后台运行完整启动流程并配置防火墙劫持，且将错误日志打印到闪存："
+TOOLS_DEBUG_ITEM_6_SUFFIX=""
 TOOLS_DEBUG_ITEM_8="8) 后台运行完整启动流程,输出执行错误并查找上下文，之后关闭进程"
-TOOLS_DEBUG_ITEM_9="9) 将\033[32m$config_tmp\033[0m下json文件合并为$TMPDIR/debug.json"
+TOOLS_DEBUG_ITEM_9_PREFIX="9) 将"
+TOOLS_DEBUG_ITEM_9_SUFFIX="下json文件合并为"
 TOOLS_FLASH_WARN="频繁写入闪存会导致闪存寿命降低，如非遇到会导致设备死机或重启的bug，请勿使用此功能！"
 TOOLS_FLASH_CONFIRM="是否确认启用此功能？"
 TOOLS_MERGE_OK="合并成功！"

scripts/lang/chs/9_upgrade.lang

@@ -52,11 +52,6 @@ UPG_PAC_GUIDE_TEXT="PAC的使用教程请参考："
 UPG_THANKS_PROJECTS="感谢以下项目及其开发者们的无私奉献！"
 UPG_THANKS_SPECIAL_TEXT="特别感谢：\033[36m所有帮助及赞助过此项目的同仁们！\033[0m"
 UPG_GETTING_UPDATE="正在检查更新......"
-UPG_GET_OK="检查更新成功"
-UPG_GET_FAIL="检查更新失败！请尝试切换其他安装源！"
-UPG_EXTRACT_START="开始解压文件......"
-UPG_SCRIPT_UPDATE_OK="脚本更新成功！"
-UPG_SCRIPT_UPDATE_PROMPT="注意：更新时会停止服务！"
 UPG_SCRIPT_CUR_VER_TEXT="当前脚本版本为："
 UPG_SCRIPT_NEW_VER_TEXT="最新脚本版本为："
 UPG_UPDATE_NOW_TEXT="立即更新"
@@ -68,8 +63,10 @@ UPG_CORETYPE_CONFIRM_TEXT="请确认该自定义内核的类型："
 UPG_CORE_SWITCH_KEEP_TEXT="是否保留相关数据库文件？"
 UPG_KEEP_TEXT="保留"
 UPG_NOT_KEEP_TEXT="不保留"
-UPG_GETTING_CORE_TEXT="正在在线获取$crashcore核心文件......"
+UPG_GETTING_CORE_TEXT_PREFIX="正在在线获取"
-UPG_CORE_DOWNLOAD_OK_TEXT="$crashcore核心下载成功！"
+UPG_GETTING_CORE_TEXT_SUFFIX="核心文件......"
+UPG_CORE_DOWNLOAD_OK_TEXT_PREFIX=""
+UPG_CORE_DOWNLOAD_OK_TEXT_SUFFIX="核心下载成功！"
 UPG_CORE_DOWNLOAD_FAIL_TEXT="核心文件下载失败！"
 UPG_CORE_DOWNLOAD_VERIFY_FAIL_TEXT="核心文件下载成功但校验失败"
 UPG_CORE_DOWNLOAD_VERIFY_HINT_TEXT="请尝试手动指定CPU版本"
@@ -86,6 +83,9 @@ UPG_CUSTOM_CORE_TASK_WARN="自定义内核已适配定时任务，但不支持
 UPG_CUSTOM_CORE_NET_WARN="如遇到网络错误请先启动ShellCrash服务！"
 UPG_CUSTOM_CORE_CURRENT="当前内核为："
 UPG_CUSTOM_CORE_SELECT="请选择需要使用的核心："
+UPG_CUSTOM_CORE_MENU_OFFICIAL="版本官方内核"
+UPG_CUSTOM_CORE_MENU_ALPHA="版本内核（支持Smart策略）"
+UPG_CUSTOM_CORE_MENU_MULTI="多版本内核"
 UPG_CUSTOM_CORE_LINK_HINT="请输入自定义内核的链接地址"
 UPG_CUSTOM_CORE_LINK_HINT2="（必须是以.tar.gz、.upx或.gz结尾的压缩文件）"
 UPG_CUSTOM_CORE_LINK_HINT3="或者输入 0 返回上级菜单"
@@ -100,18 +100,23 @@ UPG_CORE_MENU_CURRENT="当前内核："
 UPG_CORE_MENU_SYS="当前系统处理器架构："
 UPG_CORE_MENU_LOCAL_HINT="如需本地上传，请将.upx .gz .tar.gz文件上传至 /tmp 目录后重新运行crash命令"
 UPG_CORE_MENU_SELECT="请选择需要使用的核心版本："
-UPG_CORE_MENU_1="1) \033[43;30mMihomo\033[0m：\033[32m$meta_v \033[32m（原meta内核）支持全面\033[0m \033[33m占用略高\033[0m"
+UPG_CORE_MENU_1_PREFIX="1) \033[43;30mMihomo\033[0m：\033[32m"
-UPG_CORE_MENU_2="2) \033[43;30mSingBoxR\033[0m：\033[32m$singboxr_v \033[32m支持全面\033[0m \033[33m使用reF1nd增强分支\033[0m"
+UPG_CORE_MENU_1_SUFFIX=" \033[32m（原meta内核）支持全面\033[0m \033[33m占用略高\033[0m"
-UPG_CORE_MENU_3="3) \033[43;30mSingBox\033[0m：\033[32m$singbox_v \033[32m占用较低\033[0m \033[33m不支持providers\033[0m"
+UPG_CORE_MENU_2_PREFIX="2) \033[43;30mSingBoxR\033[0m：\033[32m"
-UPG_CORE_MENU_4="4) \033[43;30mClash\033[0m：\033[32m$clash_v \033[32m占用低\033[0m \033[33m不安全,已停止维护\033[0m"
+UPG_CORE_MENU_2_SUFFIX=" \033[32m支持全面\033[0m \033[33m使用reF1nd增强分支\033[0m"
-UPG_CORE_MENU_5="5) 切换版本分支及压缩方式：\033[32m$zip_type\033[0m"
+UPG_CORE_MENU_3_PREFIX="3) \033[43;30mSingBox\033[0m：\033[32m"
-UPG_CORE_MENU_6="6) \033[36m使用自定义内核\033[0m $custcore"
+UPG_CORE_MENU_3_SUFFIX=" \033[32m占用较低\033[0m \033[33m不支持providers\033[0m"
+UPG_CORE_MENU_4_PREFIX="4) \033[43;30mClash\033[0m：\033[32m"
+UPG_CORE_MENU_4_SUFFIX=" \033[32m占用低\033[0m \033[33m不安全,已停止维护\033[0m"
+UPG_CORE_MENU_5_PREFIX="5) 切换版本分支及压缩方式：\033[32m"
+UPG_CORE_MENU_5_SUFFIX="\033[0m"
+UPG_CORE_MENU_6_PREFIX="6) \033[36m使用自定义内核\033[0m "
+UPG_CORE_MENU_6_SUFFIX=""
 UPG_CORE_MENU_7="7) \033[32m更新当前内核\033[0m"
 UPG_CORE_MENU_9="9) 手动指定处理器架构"
 UPG_GEO_GETTING="正在从服务器获取数据库文件......"
-UPG_GEO_FAIL="文件下载失败！"
+UPG_GEO_OK_PREFIX=""
-UPG_GEO_EXTRACT_FAIL="文件解压失败！"
+UPG_GEO_OK_SUFFIX="数据库文件下载成功！"
-UPG_GEO_OK="$geotype数据库文件下载成功！"
 UPG_GEO_LINKING="正在获取数据库文件......"
 UPG_GEO_FINDING="正在查找可更新的数据库文件......"
 UPG_GEO_SELECT="请选择需要更新的数据库文件："
@@ -126,20 +131,21 @@ UPG_GEO_LOCAL_ONLY2="（仅限SingBox-srs）"
 UPG_GEO_LOCAL_ONLY3="（仅限Mihomo-mrs）"
 UPG_GEO_LOCAL_ONLY4="（仅限Clash-GeoIP）"
 UPG_GEO_CUSTOM_LINK="自定义数据库链接"
-UPG_GEO_CLEAN_HINT1="这将清理$CRASHDIR目录及/ruleset目录下所有数据库文件！"
+UPG_GEO_CLEAN_HINT1_PREFIX="这将清理"
+UPG_GEO_CLEAN_HINT1_SUFFIX="目录及/ruleset目录下所有数据库文件！"
 UPG_GEO_CLEAN_HINT2="清理后启动服务即可自动下载所需文件"
 UPG_GEO_CLEAN_CONFIRM="确认清理"
 UPG_GEO_CLEAN_OK="所有数据库文件均已清理！"
 UPG_DB_GETTING="正在连接服务器获取安装文件......"
 UPG_DB_DOWNLOAD_OK="下载成功，正在解压文件......"
-UPG_DB_EXTRACT_FAIL="文件解压失败！"
 UPG_DB_OK="面板安装成功！"
 UPG_DB_REFRESH_HINT="如未生效，请使用【Ctrl+F5】强制刷新浏览器！"
 UPG_DB_INSTALLED="检测到已经安装过本地面板"
 UPG_DB_UPGRADE="升级/覆盖安装"
 UPG_DB_CANCEL="安装已取消"
 UPG_DB_DIR_SELECT="请选择面板安装目录："
-UPG_DB_DIR_1="1) 在${CRASHDIR}/ui目录安装"
+UPG_DB_DIR_1_PREFIX="1) 在"
+UPG_DB_DIR_1_SUFFIX="/ui目录安装"
 UPG_DB_DIR_2="2) 在/www/clash目录安装"
 UPG_DB_TITLE="安装 dashboard 管理面板到本地"
 UPG_DB_TITLE2="打开管理面板的速度更快且更稳定"
@@ -156,8 +162,6 @@ UPG_DB_UNINSTALL="9) \033[31m卸载本地面板\033[0m"
 UPG_DB_UNINSTALL_CONFIRM="是否卸载本地面板？"
 UPG_DB_UNINSTALL_YES="1) 确认卸载"
 UPG_DB_UNINSTALL_OK="面板已经卸载！"
-UPG_CRT_DB_GETTING="正在连接服务器获取安装文件......"
-UPG_CRT_DB_DOWNLOAD_FAIL="文件下载失败！"
 UPG_CRT_DB_OK="证书安装成功！"
 UPG_CRT_TITLE1="安装/更新本地根证书文件（ca-certificates.crt）"
 UPG_CRT_TITLE2="用于解决证书校验错误，x509报错等问题"
@@ -205,15 +209,18 @@ UPG_THANKS_ITEM_REF1ND_URL="项目地址：https://github.com/reF1nd/sing-box"
 UPG_THANKS_ITEM_DUSTIN="DustinWin          开发：DustinWin"
 UPG_THANKS_ITEM_DUSTIN_URL="开发者地址：https://github.com/DustinWin"
 UPG_CORE_GET_LINK_TITLE="正在获取内核文件链接......"
-UPG_CUSTOM_CORE_CURRENT_TEXT="当前内核为："
 UPG_CUSTOM_CORE_NOTE1="不支持Gvisor、Tailscale、Wireguard、NaiveProxy"
-UPG_CORE_V1="1) \033[43;30mMihomo\033[0m：\033[32m$meta_v \033[32m（原meta内核）支持全面\033[0m \033[33m占用略高\033[0m"
+UPG_CORE_V1_PREFIX="1) \033[43;30mMihomo\033[0m：\033[32m"
+UPG_CORE_V1_SUFFIX=" \033[32m（原meta内核）支持全面\033[0m \033[33m占用略高\033[0m"
 UPG_CORE_V1_DOC="说明文档：\033[36;4mhttps://wiki.metacubex.one\033[0m"
-UPG_CORE_V2="2) \033[43;30mSingBoxR\033[0m：\033[32m$singboxr_v \033[32m支持全面\033[0m \033[33m使用reF1nd增强分支\033[0m"
+UPG_CORE_V2_PREFIX="2) \033[43;30mSingBoxR\033[0m：\033[32m"
+UPG_CORE_V2_SUFFIX=" \033[32m支持全面\033[0m \033[33m使用reF1nd增强分支\033[0m"
 UPG_CORE_V2_DOC="说明文档：\033[36;4mhttps://sing-boxr.dustinwin.us.kg\033[0m"
-UPG_CORE_V3="3) \033[43;30mSingBox\033[0m：\033[32m$singbox_v \033[32m占用较低\033[0m \033[33m不支持providers\033[0m"
+UPG_CORE_V3_PREFIX="3) \033[43;30mSingBox\033[0m：\033[32m"
+UPG_CORE_V3_SUFFIX=" \033[32m占用较低\033[0m \033[33m不支持providers\033[0m"
 UPG_CORE_V3_DOC="说明文档：\033[36;4mhttps://sing-box.sagernet.org\033[0m"
-UPG_CORE_V4="4) \033[43;30mClash\033[0m：\033[32m$clash_v \033[32m占用低\033[0m \033[33m不安全,已停止维护\033[0m"
+UPG_CORE_V4_PREFIX="4) \033[43;30mClash\033[0m：\033[32m"
+UPG_CORE_V4_SUFFIX=" \033[32m占用低\033[0m \033[33m不安全,已停止维护\033[0m"
 UPG_CORE_V4_DOC="说明文档：\033[36;4mhttps://lancellc.gitbook.io\033[0m"
 UPG_CORE_ASUS_WARN="Meta内核使用的GeoSite.dat数据库在华硕设备存在被系统误删的问题，可能无法使用!"
 UPG_GEO_FIND_TITLE="正在查找可更新的数据库文件......"
@@ -231,16 +238,16 @@ UPG_GEO_ITEM6="6) Singbox-srs数据库常用包（约0.8mb,非必要勿用）"
 UPG_GEO_ITEM8="8) \033[36m自定义数据库文件\033[0m"
 UPG_GEO_ITEM9="9) \033[31m清理数据库文件\033[0m"
 UPG_GEO_CLEAN_PROMPT="确认清理"
-UPG_GEO_CLEAN_WARN="这将清理$CRASHDIR目录及/ruleset目录下所有数据库文件！"
+UPG_GEO_CLEAN_WARN_PREFIX="这将清理"
+UPG_GEO_CLEAN_WARN_SUFFIX="目录及/ruleset目录下所有数据库文件！"
 UPG_GEO_CLEAN_WARN2="清理后启动服务即可自动下载所需文件"
 UPG_GEO_CLEANED="所有数据库文件均已清理！"
 UPG_DB_CONNECTING="正在连接服务器获取安装文件......"
-UPG_DB_DOWNLOAD_FAIL="文件下载失败！"
-UPG_DB_EXTRACT_FAIL_TEXT="文件解压失败！"
 UPG_DB_INSTALLED_HINT="检测到已经安装过本地面板"
 UPG_DB_INSTALL_CANCEL="安装已取消"
 UPG_DB_DIR_TITLE="请选择面板安装目录："
-UPG_DB_DIR_1_TEXT="1) 在${CRASHDIR}/ui目录安装"
+UPG_DB_DIR_1_TEXT_PREFIX="1) 在"
+UPG_DB_DIR_1_TEXT_SUFFIX="/ui目录安装"
 UPG_DB_DIR_2_TEXT="2) 在/www/clash目录安装"
 UPG_DB_INSTALL_TITLE="安装 dashboard 管理面板到本地"
 UPG_DB_INSTALL_TITLE2="打开管理面板的速度更快且更稳定"
@@ -254,7 +261,6 @@ UPG_DB_UNINSTALL_PROMPT="是否卸载本地面板？"
 UPG_DB_UNINSTALL_CONFIRM_TEXT="1) 确认卸载"
 UPG_DB_UNINSTALLED="面板已经卸载！"
 UPG_CRT_CONNECTING="正在连接服务器获取安装文件......"
-UPG_CRT_INSTALL_OK="证书安装成功！"
 UPG_CRT_INSTALL_TITLE1="安装/更新本地根证书文件（ca-certificates.crt）"
 UPG_CRT_INSTALL_TITLE2="用于解决证书校验错误，x509报错等问题"
 UPG_CRT_INSTALL_TITLE3="无上述问题的设备请勿使用！"

scripts/lang/chs/fw_filter.lang

@@ -1,8 +1,12 @@
 FWF_TITLE="流量过滤"
-FWF_ITEM_1="1) 过滤非常用端口： 	\033[36m$common_ports\033[0m	———用于过滤P2P流量"
+FWF_ITEM_1_PREFIX="1) 过滤非常用端口：\t"
-FWF_ITEM_2="2) 过滤局域网设备：	\033[36m$mac_return\033[0m	———使用黑/白名单进行过滤"
+FWF_ITEM_1_SUFFIX="—用于过滤P2P流量"
-FWF_ITEM_3="3) 过滤QUIC协议：	\033[36m$quic_rj\033[0m	———优化视频性能"
+FWF_ITEM_2_PREFIX="2) 过滤局域网设备：\t"
-FWF_ITEM_4="4) 过滤CN_IP(4&6)列表：\033[36m$cn_ip_route\033[0m	———优化性能"
+FWF_ITEM_2_SUFFIX="—使用黑/白名单进行过滤"
+FWF_ITEM_3_PREFIX="3) 过滤QUIC协议：\t"
+FWF_ITEM_3_SUFFIX="—优化视频性能"
+FWF_ITEM_4_PREFIX="4) 过滤CN_IP(4&6)列表："
+FWF_ITEM_4_SUFFIX="—优化性能"
 FWF_ITEM_5="5) 自定义透明路由ipv4网段：适合vlan等复杂网络环境"
 FWF_ITEM_6="6) 自定义保留地址ipv4网段：需要以保留地址为访问目标的环境"
 FWF_BACK="0) $COMMON_BACK"
@@ -21,7 +25,8 @@ FWF_PASS_WORD="不"
 FWF_COMMON_NOTE="注意：\n"
 FWF_MIX_NOTE="MIX模式下，所有fake-ip来源的非常用端口流量不会被过滤"
 FWF_ALLOWED_PORTS="当前已放行端口："
-FWF_PORT_MENU_1="1) 启用/关闭端口过滤: \t\033[36m$common_ports\033[0m"
+FWF_PORT_MENU_1_PREFIX="1) 启用/关闭端口过滤: \t"
+FWF_PORT_MENU_1_SUFFIX=""
 FWF_PORT_MENU_2="2) 添加放行端口"
 FWF_PORT_MENU_3="3) 移除指定放行端口"
 FWF_PORT_MENU_4="4) 重置默认放行端口"
@@ -76,7 +81,8 @@ FWF_FILTER_BLACK_DESC="仅列表内设备流量不经过内核"
 FWF_FILTER_WHITE_DESC="仅列表内设备流量经过内核"
 FWF_FILTER_EXISTED="当前已过滤设备为："
 FWF_FILTER_HEADER="  \033[36m设备mac/ip地址\033[0m     \033[35m设备名称\033[0m"
-FWF_FILTER_SWITCH="1) 切换为\033[33m$fw_filter_lan_over模式\033[0m"
+FWF_FILTER_SWITCH_PREFIX="1) 切换为"
+FWF_FILTER_SWITCH_SUFFIX="模式"
 FWF_FILTER_ADD_MAC="2) \033[32m添加指定设备（mac地址）\033[0m"
 FWF_FILTER_ADD_IP="3) \033[32m添加指定设备（IP地址／网段）\033[0m"
 FWF_FILTER_REMOVE="4) \033[36m移除指定设备\033[0m"

scripts/lang/chs/menu.lang

@@ -1,6 +1,8 @@
 # ===== 通用提示 =====
 
 MENU_RESTART_NOTICE="检测到配置变更，是否立即重启服务以应用新配置？"
+MENU_RESTART_NOW="立即重启"
+MENU_RESTART_LATER="暂不重启"
 
 MENU_PORT_CONFLICT_TITLE="检测到端口被以下进程占用！内核可能无法正常启动！"
 MENU_PORT_CONFLICT_HINT="请修改默认端口配置！"
@@ -13,6 +15,8 @@ MENU_CFG_LOADED_OK="配置文件加载完成！"
 
 MENU_OVERRIDE_WARN="你已经禁用了配置文件覆写功能，这会导致大量脚本功能无法使用！"
 MENU_OVERRIDE_ASK="是否取消禁用？"
+MENU_YES="是"
+MENU_NO="否"
 
 # ===== 欢迎与状态 =====
 MENU_WELCOME="欢迎使用ShellCrash！"
@@ -37,6 +41,8 @@ MENU_TG_CHANNEL="TG频道："
 # ===== /tmp 文件检测 =====
 MENU_TMP_CORE_FOUND="发现可用的内核文件："
 MENU_TMP_CORE_ASK="是否立即加载该内核（会停止当前服务）？"
+MENU_LOAD_NOW="立即加载"
+MENU_LOAD_LATER="暂不加载"
 
 MENU_TMP_CFG_FOUND="发现内核配置文件："
 MENU_TMP_CFG_ASK="是否立即加载为配置文件？"

scripts/lang/chs/override.lang

@@ -10,7 +10,8 @@ OVR_PROMPT="请输入> "
 OVR_GROUPS_CHOOSE_TYPE="请选择策略组的类型："
 OVR_GROUP_TYPE_CN="手动选择 自动选择 故障转移 负载均衡"
 OVR_WARN_1="此功能可能会导致严重问题！启用后脚本中大部分功能都将禁用！！！"
-OVR_WARN_2="如果你不是非常了解$crashcore的运行机制，切勿开启！"
+OVR_WARN_2_PREFIX="如果你不是非常了解"
+OVR_WARN_2_SUFFIX="的运行机制，切勿开启！"
 OVR_WARN_3="继续后如出现任何问题，请务必自行解决，一切提问恕不受理！"
 OVR_WARN_CONFIRM="1) 我确认遇到问题可以自行解决"
 OVR_CONFIRM_YES="1) 是"

scripts/lang/en/2_settings.lang

@@ -4,7 +4,8 @@
 SET_MENU_TITLE="Welcome to the Function Settings Menu:"
 SET_MENU_REDIR="Routing Mode:"
 SET_MENU_DNS="DNS Settings:"
-SET_MENU_FW_FILTER="Transparent Routing Traffic Filter"
+SET_MENU_FW_FILTER="Transparent Routing Traffic Filter:"
+SET_MENU_FW_FILTER_DESC="ports, devices, protocols, or lists"
 SET_MENU_SKIP_CERT="Skip Cert Verify:"
 SET_MENU_SNIFFER="Enable Sniff:"
 SET_MENU_ADV_PORT="Custom Ports and Secrets"

scripts/lang/en/8_tools.lang

@@ -11,9 +11,11 @@ TOOLS_ENABLE="Enable"
 TOOLS_CONFIGURED="Configured"
 TOOLS_SSH_ONLY_OPENWRT="This feature only works on OpenWrt devices and does not depend on services"
 TOOLS_SSH_UNSUPPORTED_SYSTEM="This feature does not support mirrored systems like Redmi AX6S. Do not try it!"
-TOOLS_SSH_PORT_ITEM="1) \033[32mChange\033[0m WAN SSH port: \033[36m$ssh_port\033[0m"
+TOOLS_SSH_PORT_ITEM_PREFIX="1) \033[32mChange\033[0m WAN SSH port:"
+TOOLS_SSH_PORT_ITEM_SUFFIX=""
 TOOLS_SSH_PASS_ITEM="2) \033[32mChange\033[0m SSH password (enter twice, then press Enter)"
-TOOLS_SSH_TOGGLE_ITEM="3) \033[33m$ssh_ol\033[0m WAN SSH access"
+TOOLS_SSH_TOGGLE_ITEM_PREFIX="3) "
+TOOLS_SSH_TOGGLE_ITEM_SUFFIX=" WAN SSH access"
 TOOLS_PROMPT_PORT="Please enter a port number (1000-65535)> "
 TOOLS_WARN_COMPAT="This page may not be compatible with all Linux devices. Use at your own discretion!"
 TOOLS_DISK_USAGE="Disk usage / current directory:"
@@ -21,10 +23,14 @@ TOOLS_MENU_TEST_ITEM="1) ShellCrash \033[33mTest Menu\033[0m"
 TOOLS_MENU_GUIDE_ITEM="2) ShellCrash \033[32mGetting Started\033[0m"
 TOOLS_MENU_LOG_ITEM="3) \033[36mLogs and Push Tools\033[0m"
 TOOLS_MENU_SSH_ITEM="4) \033[32mConfigure\033[0m WAN SSH access"
-TOOLS_MENU_MI_UPDATE_ITEM="5) \033[33m$mi_update\033[0m Xiaomi system auto-update"
+TOOLS_MENU_MI_UPDATE_ITEM_PREFIX="5) "
-TOOLS_MENU_MI_AUTO_SSH_ITEM="6) Xiaomi device SSH hardening —— \033[$mi_mi_autoSSH_type \033[0m"
+TOOLS_MENU_MI_UPDATE_ITEM_SUFFIX=" Xiaomi system auto-update"
-TOOLS_MENU_MI_TUN_FIX_ITEM="8) Xiaomi device Tun module repair —— \033[$mi_tunfix \033[0m"
+TOOLS_MENU_MI_AUTO_SSH_ITEM_PREFIX="6) Xiaomi device SSH hardening —— "
-TOOLS_MI_UPDATE_MSG="Xiaomi router auto-update has been \033[33m$mi_update\033[0m. If it does not take effect, sync the setting in the official app!"
+TOOLS_MENU_MI_AUTO_SSH_ITEM_SUFFIX=""
+TOOLS_MENU_MI_TUN_FIX_ITEM_PREFIX="8) Xiaomi device Tun module repair —— "
+TOOLS_MENU_MI_TUN_FIX_ITEM_SUFFIX=""
+TOOLS_MI_UPDATE_MSG_PREFIX="Xiaomi router auto-update has been "
+TOOLS_MI_UPDATE_MSG_SUFFIX=". If it does not take effect, sync the setting in the official app!"
 TOOLS_UNSUPPORTED_DEVICE="Unsupported device!"
 TOOLS_FETCHING_SCRIPT="Fetching online script..."
 TOOLS_DOWNLOAD_FAIL="File download failed!"
@@ -46,16 +52,25 @@ TOOLS_AUTO_SSH_WARN2="If you have issues, please report in the group:"
 TOOLS_AUTO_SSH_PWD_HINT1="Please enter the SSH password to restore (current password will not be affected)"
 TOOLS_AUTO_SSH_PWD_HINT2="(Press Enter to skip)"
 TOOLS_AUTO_SSH_INPUT="Please enter> "
-TOOLS_LOG_TG="1) Telegram push\t——\033[$stat_TG\033[0m"
+TOOLS_LOG_TG_PREFIX="1) Telegram push\t——"
-TOOLS_LOG_DEER="2) PushDeer push\t——\033[$stat_Deer\033[0m"
+TOOLS_LOG_TG_SUFFIX=""
-TOOLS_LOG_BARK="3) Bark push-IOS\t——\033[$stat_bark\033[0m"
+TOOLS_LOG_DEER_PREFIX="2) PushDeer push\t——"
-TOOLS_LOG_PO="4) Passover push\t——\033[$stat_Po\033[0m"
+TOOLS_LOG_DEER_SUFFIX=""
-TOOLS_LOG_PP="5) PushPlus push\t——\033[$stat_PP\033[0m"
+TOOLS_LOG_BARK_PREFIX="3) Bark push-IOS\t——"
-TOOLS_LOG_SYNO="6) SynoChat push\t——\033[$stat_SynoChat\033[0m"
+TOOLS_LOG_BARK_SUFFIX=""
-TOOLS_LOG_GOTIFY="7) Gotify push\t        ——\033[$stat_Gotify\033[0m"
+TOOLS_LOG_PO_PREFIX="4) Passover push\t——"
+TOOLS_LOG_PO_SUFFIX=""
+TOOLS_LOG_PP_PREFIX="5) PushPlus push\t——"
+TOOLS_LOG_PP_SUFFIX=""
+TOOLS_LOG_SYNO_PREFIX="6) SynoChat push\t——"
+TOOLS_LOG_SYNO_SUFFIX=""
+TOOLS_LOG_GOTIFY_PREFIX="7) Gotify push\t        ——"
+TOOLS_LOG_GOTIFY_SUFFIX=""
 TOOLS_LOG_VIEW="a) View \033[36mruntime logs\033[0m"
-TOOLS_LOG_TASK="b) Push task logs\t——\033[$stat_task\033[0m"
+TOOLS_LOG_TASK_PREFIX="b) Push task logs\t——"
-TOOLS_LOG_DEVICE="c) Set device name\t——\033[$device_s\033[0m"
+TOOLS_LOG_TASK_SUFFIX=""
+TOOLS_LOG_DEVICE_PREFIX="c) Set device name\t——"
+TOOLS_LOG_DEVICE_SUFFIX=""
 TOOLS_LOG_CLEAR="d) Clear log files"
 TOOLS_CONFIRM_CLOSE_TG="Are you sure you want to disable TG log push?"
 TOOLS_CONFIRM_CLOSE_DEER="Are you sure you want to disable PushDeer log push?"
@@ -120,17 +135,22 @@ TOOLS_PROXY_NOTE="Note: depends on curl (wget is not supported), and the test re
 TOOLS_PROXY_OK="Connection successful! Response time: "
 TOOLS_PROXY_TIMEOUT="Connection timed out! Please retry or check the node configuration!"
 TOOLS_DEBUG_WARN1="Note: Debug mode will stop the original kernel service"
-TOOLS_DEBUG_WARN2="Background log path: \033[32m$TMPDIR/debug.log\033[0m"
+TOOLS_DEBUG_WARN2_PREFIX="Background log path: "
+TOOLS_DEBUG_WARN2_SUFFIX=""
 TOOLS_DEBUG_WARN3="For long-running background monitoring, error is recommended as the log level to avoid oversized files!"
 TOOLS_DEBUG_WARN4="You can also use: \033[33mcrash -s debug 'warning'\033[0m to select another log level"
-TOOLS_DEBUG_ITEM_1="1) Only test the availability of the \033[32m$config_tmp\033[0m config file"
+TOOLS_DEBUG_ITEM_1_PREFIX="1) Only test the availability of the "
-TOOLS_DEBUG_ITEM_2="2) Run the \033[32m$config_tmp\033[0m config file in foreground without firewall hijacking (\033[33muse Ctrl+C to stop manually\033[0m)"
+TOOLS_DEBUG_ITEM_1_SUFFIX=" config file"
+TOOLS_DEBUG_ITEM_2_PREFIX="2) Run the "
+TOOLS_DEBUG_ITEM_2_SUFFIX=" config file in foreground without firewall hijacking (use Ctrl+C to stop manually)"
 TOOLS_DEBUG_ITEM_3="3) Run the full startup flow in background with firewall hijacking, log level: \033[31merror\033[0m"
 TOOLS_DEBUG_ITEM_4="4) Run the full startup flow in background with firewall hijacking, log level: \033[32minfo\033[0m"
 TOOLS_DEBUG_ITEM_5="5) Run the full startup flow in background with firewall hijacking, log level: \033[33mdebug\033[0m"
-TOOLS_DEBUG_ITEM_6="6) Run the full startup flow in background with firewall hijacking and print error logs to flash: \033[32m$CRASHDIR/debug.log\033[0m"
+TOOLS_DEBUG_ITEM_6_PREFIX="6) Run the full startup flow in background with firewall hijacking and print error logs to flash: "
+TOOLS_DEBUG_ITEM_6_SUFFIX=""
 TOOLS_DEBUG_ITEM_8="8) Run the full startup flow in background, print execution errors and inspect context, then close the process"
-TOOLS_DEBUG_ITEM_9="9) Merge the json files under \033[32m$config_tmp\033[0m into $TMPDIR/debug.json"
+TOOLS_DEBUG_ITEM_9_PREFIX="9) Merge the json files under "
+TOOLS_DEBUG_ITEM_9_SUFFIX=" into "
 TOOLS_FLASH_WARN="Frequent flash writes will shorten flash lifespan. Unless you are dealing with a bug that would otherwise crash or reboot the device, do not use this feature!"
 TOOLS_FLASH_CONFIRM="Confirm enabling this feature?"
 TOOLS_MERGE_OK="Merged successfully!"

scripts/lang/en/9_upgrade.lang

@@ -52,11 +52,6 @@ UPG_PAC_GUIDE_TEXT="PAC guide: "
 UPG_THANKS_PROJECTS="Thanks to the following projects and developers!"
 UPG_THANKS_SPECIAL_TEXT="Special thanks: \033[36mall contributors and sponsors!\033[0m"
 UPG_GETTING_UPDATE="Checking updates..."
-UPG_GET_OK="Update check succeeded"
-UPG_GET_FAIL="Update check failed! Please switch source and retry!"
-UPG_EXTRACT_START="Extracting files..."
-UPG_SCRIPT_UPDATE_OK="Script update succeeded!"
-UPG_SCRIPT_UPDATE_PROMPT="Note: service will be stopped during update!"
 UPG_SCRIPT_CUR_VER_TEXT="Current script version: "
 UPG_SCRIPT_NEW_VER_TEXT="Latest script version: "
 UPG_UPDATE_NOW_TEXT="Update now"
@@ -68,8 +63,10 @@ UPG_CORETYPE_CONFIRM_TEXT="Please confirm custom core type:"
 UPG_CORE_SWITCH_KEEP_TEXT="Keep related database files?"
 UPG_KEEP_TEXT="Keep"
 UPG_NOT_KEEP_TEXT="Do not keep"
-UPG_GETTING_CORE_TEXT="Fetching $crashcore core files online..."
+UPG_GETTING_CORE_TEXT_PREFIX="Fetching "
-UPG_CORE_DOWNLOAD_OK_TEXT="$crashcore core downloaded successfully!"
+UPG_GETTING_CORE_TEXT_SUFFIX=" core files online..."
+UPG_CORE_DOWNLOAD_OK_TEXT_PREFIX=""
+UPG_CORE_DOWNLOAD_OK_TEXT_SUFFIX=" core downloaded successfully!"
 UPG_CORE_DOWNLOAD_FAIL_TEXT="Core file download failed!"
 UPG_CORE_DOWNLOAD_VERIFY_FAIL_TEXT="Core file downloaded, but verification failed"
 UPG_CORE_DOWNLOAD_VERIFY_HINT_TEXT="Please try selecting a CPU version manually"
@@ -86,6 +83,9 @@ UPG_CUSTOM_CORE_TASK_WARN="Custom cores support scheduled tasks but do not suppo
 UPG_CUSTOM_CORE_NET_WARN="If you encounter network errors, start the ShellCrash service first!"
 UPG_CUSTOM_CORE_CURRENT="Current core: "
 UPG_CUSTOM_CORE_SELECT="Please choose the core you want to use:"
+UPG_CUSTOM_CORE_MENU_OFFICIAL=" official core"
+UPG_CUSTOM_CORE_MENU_ALPHA=" core (supports Smart strategy)"
+UPG_CUSTOM_CORE_MENU_MULTI=" multi-version core"
 UPG_CUSTOM_CORE_LINK_HINT="Please enter the custom core URL"
 UPG_CUSTOM_CORE_LINK_HINT2="(must end with .tar.gz, .upx, or .gz)"
 UPG_CUSTOM_CORE_LINK_HINT3="Or enter 0 to return to the previous menu"
@@ -100,18 +100,23 @@ UPG_CORE_MENU_CURRENT="Current core: "
 UPG_CORE_MENU_SYS="Current CPU architecture: "
 UPG_CORE_MENU_LOCAL_HINT="If uploading locally, place .upx, .gz, or .tar.gz files in /tmp and rerun the crash command"
 UPG_CORE_MENU_SELECT="Please choose the core version to use:"
-UPG_CORE_MENU_1="1) \033[43;30mMihomo\033[0m: \033[32m$meta_v \033[32m(full meta core) highly compatible\033[0m \033[33mmore resource usage\033[0m"
+UPG_CORE_MENU_1_PREFIX="1) \033[43;30mMihomo\033[0m: \033[32m"
-UPG_CORE_MENU_2="2) \033[43;30mSingBoxR\033[0m: \033[32m$singboxr_v \033[32mfully featured\033[0m \033[33mreF1nd enhanced branch\033[0m"
+UPG_CORE_MENU_1_SUFFIX=" \033[32m(full meta core) highly compatible\033[0m \033[33mmore resource usage\033[0m"
-UPG_CORE_MENU_3="3) \033[43;30mSingBox\033[0m: \033[32m$singbox_v \033[32mlower resource usage\033[0m \033[33mproviders are not supported\033[0m"
+UPG_CORE_MENU_2_PREFIX="2) \033[43;30mSingBoxR\033[0m: \033[32m"
-UPG_CORE_MENU_4="4) \033[43;30mClash\033[0m: \033[32m$clash_v \033[32mlow resource usage\033[0m \033[33munsafe, maintenance stopped\033[0m"
+UPG_CORE_MENU_2_SUFFIX=" \033[32mfully featured\033[0m \033[33mreF1nd enhanced branch\033[0m"
-UPG_CORE_MENU_5="5) Switch branch and compression method: \033[32m$zip_type\033[0m"
+UPG_CORE_MENU_3_PREFIX="3) \033[43;30mSingBox\033[0m: \033[32m"
-UPG_CORE_MENU_6="6) \033[36mUse custom core\033[0m $custcore"
+UPG_CORE_MENU_3_SUFFIX=" \033[32mlower resource usage\033[0m \033[33mproviders are not supported\033[0m"
+UPG_CORE_MENU_4_PREFIX="4) \033[43;30mClash\033[0m: \033[32m"
+UPG_CORE_MENU_4_SUFFIX=" \033[32mlow resource usage\033[0m \033[33munsafe, maintenance stopped\033[0m"
+UPG_CORE_MENU_5_PREFIX="5) Switch branch and compression method: \033[32m"
+UPG_CORE_MENU_5_SUFFIX="\033[0m"
+UPG_CORE_MENU_6_PREFIX="6) \033[36mUse custom core\033[0m "
+UPG_CORE_MENU_6_SUFFIX=""
 UPG_CORE_MENU_7="7) \033[32mUpdate current core\033[0m"
 UPG_CORE_MENU_9="9) Manually specify CPU architecture"
 UPG_GEO_GETTING="Fetching database files from the server..."
-UPG_GEO_FAIL="Download failed!"
+UPG_GEO_OK_PREFIX=""
-UPG_GEO_EXTRACT_FAIL="Extraction failed!"
+UPG_GEO_OK_SUFFIX=" database file downloaded successfully!"
-UPG_GEO_OK="$geotype database file downloaded successfully!"
 UPG_GEO_LINKING="Fetching database files..."
 UPG_GEO_FINDING="Searching for updatable database files..."
 UPG_GEO_SELECT="Please choose the database file to update:"
@@ -126,20 +131,21 @@ UPG_GEO_LOCAL_ONLY2="(SingBox-srs only)"
 UPG_GEO_LOCAL_ONLY3="(Mihomo-mrs only)"
 UPG_GEO_LOCAL_ONLY4="(Clash-GeoIP only)"
 UPG_GEO_CUSTOM_LINK="Custom database link"
-UPG_GEO_CLEAN_HINT1="This will clean all database files under $CRASHDIR and /ruleset!"
+UPG_GEO_CLEAN_HINT1_PREFIX="This will clean all database files under "
+UPG_GEO_CLEAN_HINT1_SUFFIX=" and /ruleset!"
 UPG_GEO_CLEAN_HINT2="After cleaning, starting the service will automatically download the required files"
 UPG_GEO_CLEAN_CONFIRM="Confirm cleanup"
 UPG_GEO_CLEAN_OK="All database files have been cleaned!"
 UPG_DB_GETTING="Connecting to the server to fetch installation files..."
 UPG_DB_DOWNLOAD_OK="Download succeeded, extracting files..."
-UPG_DB_EXTRACT_FAIL="Extraction failed!"
 UPG_DB_OK="Panel installed successfully!"
 UPG_DB_REFRESH_HINT="If it does not take effect, use Ctrl+F5 to force-refresh the browser!"
 UPG_DB_INSTALLED="A local panel is already installed"
 UPG_DB_UPGRADE="Upgrade / overwrite install"
 UPG_DB_CANCEL="Installation cancelled"
 UPG_DB_DIR_SELECT="Please choose the panel install directory:"
-UPG_DB_DIR_1="1) Install in ${CRASHDIR}/ui"
+UPG_DB_DIR_1_PREFIX="1) Install in "
+UPG_DB_DIR_1_SUFFIX="/ui"
 UPG_DB_DIR_2="2) Install in /www/clash"
 UPG_DB_TITLE="Install the dashboard management panel locally"
 UPG_DB_TITLE2="The management panel opens faster and is more stable"
@@ -156,8 +162,6 @@ UPG_DB_UNINSTALL="9) \033[31mUninstall local panel\033[0m"
 UPG_DB_UNINSTALL_CONFIRM="Uninstall the local panel?"
 UPG_DB_UNINSTALL_YES="1) Confirm uninstall"
 UPG_DB_UNINSTALL_OK="Panel has been uninstalled!"
-UPG_CRT_DB_GETTING="Connecting to the server to fetch installation files..."
-UPG_CRT_DB_DOWNLOAD_FAIL="Download failed!"
 UPG_CRT_DB_OK="Certificate installed successfully!"
 UPG_CRT_TITLE1="Install / update local root certificate file (ca-certificates.crt)"
 UPG_CRT_TITLE2="Used to fix certificate verification errors, x509 errors, and similar issues"
@@ -205,15 +209,18 @@ UPG_THANKS_ITEM_REF1ND_URL="Project: https://github.com/reF1nd/sing-box"
 UPG_THANKS_ITEM_DUSTIN="DustinWin          Developer: DustinWin"
 UPG_THANKS_ITEM_DUSTIN_URL="Developer: https://github.com/DustinWin"
 UPG_CORE_GET_LINK_TITLE="Fetching core file links..."
-UPG_CUSTOM_CORE_CURRENT_TEXT="Current core: "
 UPG_CUSTOM_CORE_NOTE1="Gvisor, Tailscale, Wireguard, and NaiveProxy are not supported"
-UPG_CORE_V1="1) \033[43;30mMihomo\033[0m: \033[32m$meta_v \033[32m(full meta core) highly compatible\033[0m \033[33mmore resource usage\033[0m"
+UPG_CORE_V1_PREFIX="1) \033[43;30mMihomo\033[0m: \033[32m"
+UPG_CORE_V1_SUFFIX=" \033[32m(full meta core) highly compatible\033[0m \033[33mmore resource usage\033[0m"
 UPG_CORE_V1_DOC="Docs: \033[36;4mhttps://wiki.metacubex.one\033[0m"
-UPG_CORE_V2="2) \033[43;30mSingBoxR\033[0m: \033[32m$singboxr_v \033[32mfully featured\033[0m \033[33mreF1nd enhanced branch\033[0m"
+UPG_CORE_V2_PREFIX="2) \033[43;30mSingBoxR\033[0m: \033[32m"
+UPG_CORE_V2_SUFFIX=" \033[32mfully featured\033[0m \033[33mreF1nd enhanced branch\033[0m"
 UPG_CORE_V2_DOC="Docs: \033[36;4mhttps://sing-boxr.dustinwin.us.kg\033[0m"
-UPG_CORE_V3="3) \033[43;30mSingBox\033[0m: \033[32m$singbox_v \033[32mlower resource usage\033[0m \033[33mproviders are not supported\033[0m"
+UPG_CORE_V3_PREFIX="3) \033[43;30mSingBox\033[0m: \033[32m"
+UPG_CORE_V3_SUFFIX=" \033[32mlower resource usage\033[0m \033[33mproviders are not supported\033[0m"
 UPG_CORE_V3_DOC="Docs: \033[36;4mhttps://sing-box.sagernet.org\033[0m"
-UPG_CORE_V4="4) \033[43;30mClash\033[0m: \033[32m$clash_v \033[32mlow resource usage\033[0m \033[33munsafe, maintenance stopped\033[0m"
+UPG_CORE_V4_PREFIX="4) \033[43;30mClash\033[0m: \033[32m"
+UPG_CORE_V4_SUFFIX=" \033[32mlow resource usage\033[0m \033[33munsafe, maintenance stopped\033[0m"
 UPG_CORE_V4_DOC="Docs: \033[36;4mhttps://lancellc.gitbook.io\033[0m"
 UPG_CORE_ASUS_WARN="The GeoSite.dat database used by Meta core may be deleted by the system on Asus devices, so it may not work!"
 UPG_GEO_FIND_TITLE="Searching for updatable database files..."
@@ -231,16 +238,16 @@ UPG_GEO_ITEM6="6) SingBox-srs common package (about 0.8mb, use only if needed)"
 UPG_GEO_ITEM8="8) \033[36mCustom database file\033[0m"
 UPG_GEO_ITEM9="9) \033[31mClean database files\033[0m"
 UPG_GEO_CLEAN_PROMPT="Confirm cleanup"
-UPG_GEO_CLEAN_WARN="This will clean all database files under $CRASHDIR and /ruleset!"
+UPG_GEO_CLEAN_WARN_PREFIX="This will clean all database files under "
+UPG_GEO_CLEAN_WARN_SUFFIX=" and /ruleset!"
 UPG_GEO_CLEAN_WARN2="After cleanup, start the service to download the required files automatically"
 UPG_GEO_CLEANED="All database files have been cleaned!"
 UPG_DB_CONNECTING="Connecting to the server to fetch installation files..."
-UPG_DB_DOWNLOAD_FAIL="Download failed!"
-UPG_DB_EXTRACT_FAIL_TEXT="Extraction failed!"
 UPG_DB_INSTALLED_HINT="A local panel is already installed"
 UPG_DB_INSTALL_CANCEL="Installation cancelled"
 UPG_DB_DIR_TITLE="Please choose the panel install directory:"
-UPG_DB_DIR_1_TEXT="1) Install in ${CRASHDIR}/ui"
+UPG_DB_DIR_1_TEXT_PREFIX="1) Install in "
+UPG_DB_DIR_1_TEXT_SUFFIX="/ui"
 UPG_DB_DIR_2_TEXT="2) Install in /www/clash"
 UPG_DB_INSTALL_TITLE="Install the dashboard management panel locally"
 UPG_DB_INSTALL_TITLE2="The management panel opens faster and is more stable"
@@ -254,7 +261,6 @@ UPG_DB_UNINSTALL_PROMPT="Uninstall the local panel?"
 UPG_DB_UNINSTALL_CONFIRM_TEXT="1) Confirm uninstall"
 UPG_DB_UNINSTALLED="Panel has been uninstalled!"
 UPG_CRT_CONNECTING="Connecting to the server to fetch installation files..."
-UPG_CRT_INSTALL_OK="Certificate installed successfully!"
 UPG_CRT_INSTALL_TITLE1="Install / update local root certificate file (ca-certificates.crt)"
 UPG_CRT_INSTALL_TITLE2="Used to fix certificate verification errors, x509 errors, and similar issues"
 UPG_CRT_INSTALL_TITLE3="Do not use on devices without the above issues!"

scripts/lang/en/fw_filter.lang

@@ -1,8 +1,12 @@
 FWF_TITLE="Traffic Filter"
-FWF_ITEM_1="1) Filter non-common ports: \t\033[36m$common_ports\033[0m\t--- used to filter P2P traffic"
+FWF_ITEM_1_PREFIX="1) Filter Common ports:  "
-FWF_ITEM_2="2) Filter LAN devices: \t\033[36m$mac_return\033[0m\t--- use blacklist/whitelist filtering"
+FWF_ITEM_1_SUFFIX="--- filter P2P traffic"
-FWF_ITEM_3="3) Filter QUIC protocol: \t\033[36m$quic_rj\033[0m\t--- improve video performance"
+FWF_ITEM_2_PREFIX="2) Filter LAN devices:   "
-FWF_ITEM_4="4) Filter CN_IP (4&6) list: \033[36m$cn_ip_route\033[0m\t--- improve performance"
+FWF_ITEM_2_SUFFIX="--- use black/white list"
+FWF_ITEM_3_PREFIX="3) Filter QUIC protocol: "
+FWF_ITEM_3_SUFFIX="--- improve video"
+FWF_ITEM_4_PREFIX="4) Filter CN_IP list:    "
+FWF_ITEM_4_SUFFIX="--- improve performance"
 FWF_ITEM_5="5) Custom transparent routing IPv4 subnet: suitable for vlan and other complex networks"
 FWF_ITEM_6="6) Custom reserved-address IPv4 subnet: for environments that need reserved addresses as targets"
 FWF_BACK="0) $COMMON_BACK"
@@ -21,7 +25,8 @@ FWF_PASS_WORD="not"
 FWF_COMMON_NOTE="Note:\n"
 FWF_MIX_NOTE="In MIX mode, non-common port traffic from fake-ip sources will not be filtered"
 FWF_ALLOWED_PORTS="Currently allowed ports: "
-FWF_PORT_MENU_1="1) Enable/disable port filtering: \t\033[36m$common_ports\033[0m"
+FWF_PORT_MENU_1_PREFIX="1) Enable/disable port filtering: \t"
+FWF_PORT_MENU_1_SUFFIX=""
 FWF_PORT_MENU_2="2) Add allowed port"
 FWF_PORT_MENU_3="3) Remove specified allowed port"
 FWF_PORT_MENU_4="4) Reset default allowed ports"
@@ -76,7 +81,8 @@ FWF_FILTER_BLACK_DESC="Only the devices in the list bypass the core"
 FWF_FILTER_WHITE_DESC="Only the devices in the list pass through the core"
 FWF_FILTER_EXISTED="Currently filtered devices:"
 FWF_FILTER_HEADER="  \033[36mDevice MAC/IP\033[0m     \033[35mDevice name\033[0m"
-FWF_FILTER_SWITCH="1) Switch to \033[33m$fw_filter_lan_over mode\033[0m"
+FWF_FILTER_SWITCH_PREFIX="1) Switch to "
+FWF_FILTER_SWITCH_SUFFIX=" mode"
 FWF_FILTER_ADD_MAC="2) \033[32mAdd specified device (MAC)\033[0m"
 FWF_FILTER_ADD_IP="3) \033[32mAdd specified device (IP/subnet)\033[0m"
 FWF_FILTER_REMOVE="4) \033[36mRemove specified device\033[0m"

scripts/lang/en/menu.lang

@@ -1,6 +1,8 @@
 # ===== Common Prompts =====
 
 MENU_RESTART_NOTICE="Changes have been detected. Please restart the service!"
+MENU_RESTART_NOW="Restart now"
+MENU_RESTART_LATER="Not now"
 
 MENU_PORT_CONFLICT_TITLE="The port is occupied by the following process. The core may fail to start!"
 MENU_PORT_CONFLICT_HINT="Please modify the default port configuration!"
@@ -13,6 +15,8 @@ MENU_CFG_LOADED_OK="Configuration file loaded successfully!"
 
 MENU_OVERRIDE_WARN="You have disabled configuration overwrite. This will cause many features to be unavailable!"
 MENU_OVERRIDE_ASK="Cancel the disable setting?"
+MENU_YES="Yes"
+MENU_NO="No"
 
 # ===== Welcome & Status =====
 MENU_WELCOME="Welcome to ShellCrash!"
@@ -37,6 +41,8 @@ MENU_TG_CHANNEL="Telegram Channel: "
 # ===== /tmp File Detection =====
 MENU_TMP_CORE_FOUND="Available core file found:"
 MENU_TMP_CORE_ASK="Load this core file? (The current service will be stopped)"
+MENU_LOAD_NOW="Load now"
+MENU_LOAD_LATER="Not now"
 
 MENU_TMP_CFG_FOUND="Kernel configuration file found:"
 MENU_TMP_CFG_ASK="Load as the configuration file? (1/0) > "

scripts/lang/en/override.lang

@@ -10,7 +10,8 @@ OVR_PROMPT="Please enter> "
 OVR_GROUPS_CHOOSE_TYPE="Please choose the proxy group type:"
 OVR_GROUP_TYPE_CN="Manual Select Auto Select Failover Load Balance"
 OVR_WARN_1="This feature may cause serious problems! Most script functions will be disabled after enabling it!!!"
-OVR_WARN_2="If you are not very familiar with how $crashcore works, do not enable it!"
+OVR_WARN_2_PREFIX="If you are not very familiar with how "
+OVR_WARN_2_SUFFIX=" works, do not enable it!"
 OVR_WARN_3="If any problem occurs after continuing, you must solve it yourself. No questions will be accepted!"
 OVR_WARN_CONFIRM="1) I confirm I can solve any problems myself"
 OVR_CONFIRM_YES="1) Yes"

scripts/libs/i18n.sh

@@ -3,6 +3,6 @@ load_lang() {
     i18n=$(cat "$CRASHDIR"/configs/i18n.cfg 2>/dev/null)
     [ -z "$i18n" ] && i18n=chs
     
-    file="$CRASHDIR/lang/$i18n/$1.lang"
+    i18n_file="$CRASHDIR/lang/$i18n/$1.lang"
-    [ -s "$file" ] && . "$file"
+    [ -s "$i18n_file" ] && . "$i18n_file"
 }

scripts/menu.sh

@@ -33,8 +33,8 @@ load_lang menu
 
 checkrestart() {
     comp_box "\033[32m$MENU_RESTART_NOTICE\033[0m"
-    btm_box "1) 立即重启" \
+    btm_box "1) $MENU_RESTART_NOW" \
-        "0) 暂不重启"
+        "0) $MENU_RESTART_LATER"
     read -r -p "$COMMON_INPUT> " res
     if [ "$res" = 1 ]; then
         start_service
@@ -144,20 +144,21 @@ ckstatus() {
 
     # 检查/tmp内核文件
     for file in $(ls /tmp | grep -v [/$] | grep -v ' ' | grep -Ev ".*(zip|7z|tar)$" | grep -iE 'CrashCore|^clash$|^clash-linux.*|^mihomo.*|^sing.*box'); do
-        comp_box "$MENU_TMP_CORE_FOUND \033[36m/tmp/$file\033[0m" \
+		local tmp_file="/tmp/$file"
+        comp_box "$MENU_TMP_CORE_FOUND \033[36m$tmp_file\033[0m" \
             "$MENU_TMP_CORE_ASK"
-        btm_box "1) 立即加载" \
+        btm_box "1) $MENU_LOAD_NOW" \
-            "0) 暂不加载"
+            "0) $MENU_LOAD_LATER"
         read -r -p "$COMMON_INPUT> " res
         [ "$res" = 1 ] && {
-            zip_type=$(echo "$file" | grep -oE 'tar.gz$|upx$|gz$')
+            zip_type=$(echo "$tmp_file" | grep -oE 'tar.gz$|upx$|gz$')
             . "$CRASHDIR"/menus/9_upgrade.sh && setcoretype
-            . "$CRASHDIR"/libs/core_tools.sh && core_check "/tmp/$file"
+            . "$CRASHDIR"/libs/core_tools.sh && core_check "$tmp_file"
             if [ "$?" = 0 ] && [ -n "$crashcore" ]; then
                 msg_alert "\033[32m$MENU_CORE_LOADED_OK\033[0m"
                 switch_core
             else
-                rm -rf /tmp/"$file"
+                rm -rf "$tmp_file"
                 msg_alert "\033[33m$MENU_CORE_LOADED_BAD\033[0m" \
                     "\033[33m$MENU_CORE_REMOVED\033[0m"
             fi
@@ -166,17 +167,17 @@ ckstatus() {
 
     # 检查/tmp配置文件
     for file in $(ls /tmp | grep -v [/$] | grep -v ' ' | grep -iE 'config.yaml$|config.yml$|config.json$'); do
-        tmp_file=/tmp/$file
+        local tmp_file="/tmp/$file"
-        comp_box "$MENU_TMP_CFG_FOUND\033[36m/tmp/$file\033[0m" \
+        comp_box "$MENU_TMP_CFG_FOUND\033[36m$tmp_file\033[0m" \
             "$MENU_TMP_CFG_ASK"
-        btm_box "1) 立即加载" \
+        btm_box "1) $MENU_LOAD_NOW" \
-            "0) 暂不加载"
+            "0) $MENU_LOAD_LATER"
         read -p "$COMMON_INPUT> " res
         [ "$res" = 1 ] && {
-            if [ -n "$(echo /tmp/$file | grep -iE '.json$')" ]; then
+            if [ -n "$(echo $tmp_file | grep -iE '.json$')" ]; then
-                mv -f /tmp/$file "$CRASHDIR"/jsons/config.json
+                mv -f "$tmp_file" "$CRASHDIR"/jsons/config.json
             else
-                mv -f /tmp/$file "$CRASHDIR"/yamls/config.yaml
+                mv -f "$tmp_file" "$CRASHDIR"/yamls/config.yaml
             fi
             msg_alert "\033[32m$MENU_CFG_LOADED_OK\033[0m "
         }
@@ -186,8 +187,8 @@ ckstatus() {
     [ "$disoverride" = "1" ] && {
         comp_box "\033[33m$MENU_OVERRIDE_WARN\033[0m" \
             "$MENU_OVERRIDE_ASK"
-        btm_box "1) 是" \
+        btm_box "1) $MENU_YES" \
-            "0) 否"
+            "0) $MENU_NO"
         read -p "$COMMON_INPUT> " res
         [ "$res" = 1 ] && unset disoverride && setconfig disoverride
     }

scripts/menus/2_settings.sh

@@ -20,7 +20,7 @@ settings() {
         comp_box "\033[30;47m$SET_MENU_TITLE\033[0m"
         content_line "1) $SET_MENU_REDIR\t\033[36m$redir_mod$MENU_MOD\033[0m"
         content_line "2) $SET_MENU_DNS\t\033[36m$dns_mod\033[0m"
-        content_line "3) $SET_MENU_FW_FILTER"
+        content_line "3) $SET_MENU_FW_FILTER\t$SET_MENU_FW_FILTER_DESC"
         [ "$disoverride" != "1" ] && {
             content_line "4) $SET_MENU_SKIP_CERT\t\033[36m$skip_cert\033[0m"
             content_line "5) $SET_MENU_SNIFFER\t\033[36m$sniffer\033[0m"
@@ -265,6 +265,7 @@ set_redir_mod() {
         [ -z "$firewall_area" ] && firewall_area=1
         [ "$firewall_area" = 4 ] && redir_mod="$MENU_PURE_MOD"
         [ -z "$redir_mod" ] && redir_mod='Redir'
+        [ -z "$vm_redir" ] && vm_redir='OFF'
         firewall_area_dsc=$(echo "$SET_FW_AREA_DESC($bypass_host)" | cut -d'|' -f$firewall_area)
         comp_box "\033[33m$SET_REDIR_RESTART_HINT\033[0m" \
             "$SET_REDIR_CURRENT\033[47;30m$redir_mod$MENU_MOD\033[0m；  $SET_CORE_CURRENT\033[47;30m$crashcore\033[0m"
@@ -550,7 +551,6 @@ set_adv_config() {
 
 set_firewall_area() {
     while true; do
-        [ -z "$vm_redir" ] && vm_redir='OFF'
         comp_box "\033[33m$FW_AREA_NOTE_1\033[0m" \
             "\033[33m$FW_AREA_NOTE_2\033[0m" \
             "" \

scripts/menus/5_task.sh

@@ -122,8 +122,8 @@ task_add() {
             ;;
         [1-9] | [1-9][0-9])
             if [ "$num" -le "$(echo "$list" | wc -l)" ]; then
-                task_id=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep -Ev '^(#|$)' | sed -n "$num p" | awk -F '#' '{print $1}')
+                task_id=$(cat "$CRASHDIR"/task/task_${i18n}.list "$CRASHDIR"/task/task.user 2>/dev/null | grep -Ev '^(#|$)' | sed -n "$num p" | awk -F '#' '{print $1}')
-                task_name=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep -Ev '^(#|$)' | sed -n "$num p" | awk -F '#' '{print $3}')
+                task_name=$(cat "$CRASHDIR"/task/task_${i18n}.list "$CRASHDIR"/task/task.user 2>/dev/null | grep -Ev '^(#|$)' | sed -n "$num p" | awk -F '#' '{print $3}')
                 task_type
                 break
             else
@@ -292,7 +292,7 @@ task_manager() {
                     fi
                 else
                     task_des=$(echo "$task_txt" | awk '{print $2}')
-                    task_name=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $3}')
+                    task_name=$(cat "$CRASHDIR"/task/task_${i18n}.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $3}')
                     comp_box "$TASK5_CURRENT_TASK\033[36m$task_des\033[0m"
                     btm_box "1) $TASK5_EDIT_TASK" \
                         "2) $TASK5_DEL_TASK" \
@@ -313,7 +313,7 @@ task_manager() {
                         common_success
                         ;;
                     3)
-                        task_command=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $2}')
+                        task_command=$(cat "$CRASHDIR"/task/task_${i18n}.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$task_id" | awk -F '#' '{print $2}')
                         eval "$task_command" && task_res="$TASK5_RUN_OK" || task_res="$TASK5_RUN_FAIL"
                         msg_alert "\033[33m$TASK5_TASK_PREFIX$task_des】$task_res\033[0m"
                         ;;

scripts/menus/6_core_config.sh

@@ -143,9 +143,9 @@ setproviders() {
         content_line "d) $CORECFG_DEL_PROVIDER"
         content_line ""
         content_line "\033[36m$CORECFG_MORE_CONFIG_HINT\033[0m"
-        [ -n "$link" ] &&
+        [ -n "$2" ] &&
             content_line "b) $CORECFG_GEN_LOCAL_ONE"
-        echo "$link$link_uri" | grep -q '://' &&
+        echo "$2" | grep -q '://' &&
             content_line "c) $CORECFG_GEN_ONLINE_ONE"
         echo "$link" | grep -q '^http' &&
             content_line "e) $CORECFG_GET_ONLINE_DIRECT"

scripts/menus/8_tools.sh

@@ -19,9 +19,9 @@ ssh_tools() {
         [ -z "$ssh_port" ] && ssh_port=10022
         comp_box "\033[33m$TOOLS_SSH_ONLY_OPENWRT\033[0m" \
             "\033[31m$TOOLS_SSH_UNSUPPORTED_SYSTEM\033[0m"
-        btm_box "$TOOLS_SSH_PORT_ITEM" \
+        btm_box "${TOOLS_SSH_PORT_ITEM_PREFIX}\033[36m$ssh_port\033[0m${TOOLS_SSH_PORT_ITEM_SUFFIX}" \
             "$TOOLS_SSH_PASS_ITEM" \
-            "$TOOLS_SSH_TOGGLE_ITEM" \
+            "${TOOLS_SSH_TOGGLE_ITEM_PREFIX}\033[33m$ssh_ol\033[0m${TOOLS_SSH_TOGGLE_ITEM_SUFFIX}" \
             "" \
             "0) $COMMON_BACK \033[0m"
         read -r -p "$COMMON_INPUT> " num
@@ -88,9 +88,9 @@ tools() {
         content_line "$TOOLS_MENU_GUIDE_ITEM"
         content_line "$TOOLS_MENU_LOG_ITEM"
         [ -f /etc/firewall.user ] && content_line "$TOOLS_MENU_SSH_ITEM"
-        [ -x /usr/sbin/otapredownload ] && content_line "$TOOLS_MENU_MI_UPDATE_ITEM"
+        [ -x /usr/sbin/otapredownload ] && content_line "${TOOLS_MENU_MI_UPDATE_ITEM_PREFIX}\033[33m$mi_update\033[0m${TOOLS_MENU_MI_UPDATE_ITEM_SUFFIX}"
-        [ "$systype" = "mi_snapshot" ] && content_line "$TOOLS_MENU_MI_AUTO_SSH_ITEM"
+        [ "$systype" = "mi_snapshot" ] && content_line "${TOOLS_MENU_MI_AUTO_SSH_ITEM_PREFIX}\033[$mi_mi_autoSSH_type \033[0m${TOOLS_MENU_MI_AUTO_SSH_ITEM_SUFFIX}"
-        [ "$systype" = "mi_snapshot" ] && content_line "$TOOLS_MENU_MI_TUN_FIX_ITEM"
+        [ "$systype" = "mi_snapshot" ] && content_line "${TOOLS_MENU_MI_TUN_FIX_ITEM_PREFIX}\033[$mi_tunfix \033[0m${TOOLS_MENU_MI_TUN_FIX_ITEM_SUFFIX}"
         btm_box "" \
             "0) $COMMON_BACK"
         read -r -p "$COMMON_INPUT> " num
@@ -123,7 +123,8 @@ tools() {
                         sed -i "/^\s*#.*otapredownload/ s/^\s*#//" /etc/crontabs/root ||
                         echo "15 3,4,5 * * * /usr/sbin/otapredownload >/dev/null 2>&1" >>/etc/crontabs/root
                 fi
-                    msg_alert "\033[32m$TOOLS_MI_UPDATE_MSG"
+                [ "$mi_update" = "$TOOLS_DISABLE" ] && mi_update=$TOOLS_ENABLE || mi_update=$TOOLS_DISABLE
+                msg_alert "\033[32m${TOOLS_MI_UPDATE_MSG_PREFIX}\033[33m$mi_update\033[0m${TOOLS_MI_UPDATE_MSG_SUFFIX}\033[0m"
             fi
             ;;
         6)
@@ -227,17 +228,17 @@ log_pusher() {
         [ -n "$push_Gotify" ] && stat_Gotify=32mON || stat_Gotify=33mOFF
         [ "$task_push" = 1 ] && stat_task=32mON || stat_task=33mOFF
         [ -n "$device_name" ] && device_s=32m$device_name || device_s=33m$COMMON_UNSET
-        comp_box "$TOOLS_LOG_TG" \
+        comp_box "${TOOLS_LOG_TG_PREFIX}\033[$stat_TG\033[0m${TOOLS_LOG_TG_SUFFIX}" \
-            "$TOOLS_LOG_DEER" \
+            "${TOOLS_LOG_DEER_PREFIX}\033[$stat_Deer\033[0m${TOOLS_LOG_DEER_SUFFIX}" \
-            "$TOOLS_LOG_BARK" \
+            "${TOOLS_LOG_BARK_PREFIX}\033[$stat_bark\033[0m${TOOLS_LOG_BARK_SUFFIX}" \
-            "$TOOLS_LOG_PO" \
+            "${TOOLS_LOG_PO_PREFIX}\033[$stat_Po\033[0m${TOOLS_LOG_PO_SUFFIX}" \
-            "$TOOLS_LOG_PP" \
+            "${TOOLS_LOG_PP_PREFIX}\033[$stat_PP\033[0m${TOOLS_LOG_PP_SUFFIX}" \
-            "$TOOLS_LOG_SYNO" \
+            "${TOOLS_LOG_SYNO_PREFIX}\033[$stat_SynoChat\033[0m${TOOLS_LOG_SYNO_SUFFIX}" \
-            "$TOOLS_LOG_GOTIFY" \
+            "${TOOLS_LOG_GOTIFY_PREFIX}\033[$stat_Gotify\033[0m${TOOLS_LOG_GOTIFY_SUFFIX}" \
             "" \
             "$TOOLS_LOG_VIEW" \
-            "$TOOLS_LOG_TASK" \
+            "${TOOLS_LOG_TASK_PREFIX}\033[$stat_task\033[0m${TOOLS_LOG_TASK_SUFFIX}" \
-            "$TOOLS_LOG_DEVICE" \
+            "${TOOLS_LOG_DEVICE_PREFIX}\033[$device_s\033[0m${TOOLS_LOG_DEVICE_SUFFIX}" \
             "$TOOLS_LOG_CLEAR" \
             "" \
             "0) $COMMON_BACK"
@@ -685,18 +686,18 @@ testcommand() {
 debug() {
     echo "$crashcore" | grep -q 'singbox' && config_tmp="$TMPDIR"/jsons || config_tmp="$TMPDIR"/config.yaml
     comp_box "\033[36m$TOOLS_DEBUG_WARN1\033[0m" \
-        "$TOOLS_DEBUG_WARN2" \
+        "${TOOLS_DEBUG_WARN2_PREFIX}\033[32m$TMPDIR/debug.log\033[0m${TOOLS_DEBUG_WARN2_SUFFIX}" \
         "$TOOLS_DEBUG_WARN3" \
         "$TOOLS_DEBUG_WARN4"
-    content_line "$TOOLS_DEBUG_ITEM_1"
+    content_line "${TOOLS_DEBUG_ITEM_1_PREFIX}\033[32m$config_tmp\033[0m${TOOLS_DEBUG_ITEM_1_SUFFIX}"
-    content_line "$TOOLS_DEBUG_ITEM_2"
+    content_line "${TOOLS_DEBUG_ITEM_2_PREFIX}\033[32m$config_tmp\033[0m${TOOLS_DEBUG_ITEM_2_SUFFIX}"
     content_line "$TOOLS_DEBUG_ITEM_3"
     content_line "$TOOLS_DEBUG_ITEM_4"
     content_line "$TOOLS_DEBUG_ITEM_5"
-    content_line "$TOOLS_DEBUG_ITEM_6"
+    content_line "${TOOLS_DEBUG_ITEM_6_PREFIX}\033[32m$CRASHDIR/debug.log\033[0m${TOOLS_DEBUG_ITEM_6_SUFFIX}"
     content_line ""
     content_line "$TOOLS_DEBUG_ITEM_8"
-    [ -s "$TMPDIR"/jsons/inbounds.json ] && content_line "$TOOLS_DEBUG_ITEM_9"
+    [ -s "$TMPDIR"/jsons/inbounds.json ] && content_line "${TOOLS_DEBUG_ITEM_9_PREFIX}\033[32m$config_tmp\033[0m${TOOLS_DEBUG_ITEM_9_SUFFIX}\033[32m$TMPDIR/debug.json\033[0m"
     btm_box "" \
         "0) $COMMON_BACK"
     read -r -p "$COMMON_INPUT> " num
@@ -765,4 +766,3 @@ debug() {
         ;;
     esac
 }
-

scripts/menus/9_upgrade.sh

@@ -300,11 +300,11 @@ getcore() {
     # 获取在线内核文件
     line_break
     separator_line "="
-    content_line "$UPG_GETTING_CORE_TEXT"
+    content_line "${UPG_GETTING_CORE_TEXT_PREFIX}${crashcore}${UPG_GETTING_CORE_TEXT_SUFFIX}"
     core_webget
     case "$?" in
     0)
-        content_line "\033[32m$UPG_CORE_DOWNLOAD_OK_TEXT\033[0m"
+        content_line "\033[32m${UPG_CORE_DOWNLOAD_OK_TEXT_PREFIX}${crashcore}${UPG_CORE_DOWNLOAD_OK_TEXT_SUFFIX}\033[0m"
         separator_line "="
         sleep 1
         switch_core
@@ -338,7 +338,7 @@ checkcustcore() {
         release_date=$(cat "$TMPDIR"/github_api | grep '"published_at":' | awk -F '"' '{print $4}')
         update_date=$(cat "$TMPDIR"/github_api | grep '"updated_at":' | head -n 1 | awk -F '"' '{print $4}')
         echo "$cpucore" | grep -q 'mips' && cpu_type=mips || cpu_type=$cpucore
-        cat "$TMPDIR"/github_api | grep "browser_download_url" | grep -oE "https://github.com/${project}/releases/download.*linux.*${cpu_type}.*\.gz\"$" | sed 's/"//' >"$TMPDIR"/core.list
+        cat "$TMPDIR"/github_api | grep "browser_download_url" | grep -oE "https://github.com/${project}/releases/download.*linux.*${cpu_type}.*\.(gz|upx)\"$" | sed 's/"//' >"$TMPDIR"/core.list
         rm -rf "$TMPDIR"/github_api
 
         if [ -s "$TMPDIR"/core.list ]; then
@@ -391,6 +391,7 @@ checkcustcore() {
 setcustcore() {
     while true; do
         [ -z "$cpucore" ] && check_cpucore
+        [ -n "$custcorelink" ] && custcore="$(echo "$custcorelink" | sed 's#.*github.com##; s#/releases/download/#@#')"
         line_break
         separator_line "="
         content_line "\033[36m$UPG_CUSTOM_CORE_SOURCE\033[0m"
@@ -398,15 +399,16 @@ setcustcore() {
         content_line "\033[31m$UPG_CUSTOM_CORE_TASK_WARN\033[0m"
         content_line "\033[32m$UPG_CUSTOM_CORE_NET_WARN\033[0m"
         [ -n "$custcore" ] && {
-            content_line "$UPG_CUSTOM_CORE_CURRENT_TEXT\033[36m$custcore\033[0m"
+            content_line "$UPG_CUSTOM_CORE_CURRENT\033[36m$custcore\033[0m"
         }
         separator_line "="
         content_line "$UPG_CUSTOM_CORE_SELECT"
         separator_line "-"
-        btm_box "$UPG_CORE_MENU_1" \
+        btm_box "1) \033[36mMetaCubeX/mihomo\033[32m@release\033[0m$UPG_CUSTOM_CORE_MENU_OFFICIAL" \
-            "$UPG_CORE_MENU_2" \
+            "2) \033[36mvernesong/mihomo\033[32m@alpha\033[0m$UPG_CUSTOM_CORE_MENU_ALPHA" \
-            "$UPG_CORE_MENU_3" \
+            "3) \033[36mSagerNet/sing-box\033[32m@release\033[0m$UPG_CUSTOM_CORE_MENU_OFFICIAL" \
-            "$UPG_CORE_MENU_4" \
+            "4) \033[36mDustinWin/mihomo\033[0m$UPG_CUSTOM_CORE_MENU_MULTI" \
+            "5) \033[36mDustinWin/sing-boxr\033[0m$UPG_CUSTOM_CORE_MENU_MULTI" \
             "$UPG_CORE_MENU_9" \
             "" \
             "0) $COMMON_BACK"
@@ -434,9 +436,15 @@ setcustcore() {
             checkcustcore
             ;;
         4)
-            project=juewuy/ShellCrash
+            project=DustinWin/proxy-tools
-            api_tag=clash.premium.latest
+            api_tag=mihomo
-            crashcore=clashpre
+            crashcore=meta
+            checkcustcore
+            ;;
+        5)
+            project=DustinWin/proxy-tools
+            api_tag=sing-box
+            crashcore=singboxr
             checkcustcore
             ;;
         9)
@@ -496,7 +504,6 @@ setcore() {
         [ -z "$crashcore" ] && crashcore="unknow"
         [ -z "$zip_type" ] && zip_type="tar.gz"
         echo "$crashcore" | grep -q 'singbox' && core_old=singbox || core_old=clash
-        [ -n "$custcorelink" ] && custcore="$(echo "$custcorelink" | sed 's#.*github.com##; s#/releases/download/#@#')"
 
         [ -z "$cpucore" ] && check_cpucore
 
@@ -506,22 +513,22 @@ setcore() {
             "" \
             "\033[33m$UPG_CORE_MENU_SELECT\033[0m"
 
-        content_line "$UPG_CORE_V1"
+        content_line "${UPG_CORE_V1_PREFIX}${meta_v}${UPG_CORE_V1_SUFFIX}"
         sub_content_line "$UPG_CORE_V1_DOC"
 
-        content_line "$UPG_CORE_V2"
+        content_line "${UPG_CORE_V2_PREFIX}${singboxr_v}${UPG_CORE_V2_SUFFIX}"
         sub_content_line "$UPG_CORE_V2_DOC"
 
         [ "$zip_type" = 'upx' ] && {
-            content_line "$UPG_CORE_V3"
+            content_line "${UPG_CORE_V3_PREFIX}${singbox_v}${UPG_CORE_V3_SUFFIX}"
             sub_content_line "$UPG_CORE_V3_DOC"
         }
         [ "$zip_type" = 'upx' ] && {
-            content_line "$UPG_CORE_V4"
+            content_line "${UPG_CORE_V4_PREFIX}${clash_v}${UPG_CORE_V4_SUFFIX}"
             sub_content_line "$UPG_CORE_V4_DOC"
         }
-        btm_box "$UPG_CORE_MENU_5" \
+        btm_box "${UPG_CORE_MENU_5_PREFIX}${zip_type}${UPG_CORE_MENU_5_SUFFIX}" \
-            "$UPG_CORE_MENU_6" \
+            "${UPG_CORE_MENU_6_PREFIX}${UPG_CORE_MENU_6_SUFFIX}" \
             "$UPG_CORE_MENU_7" \
             "$UPG_CORE_MENU_9" \
             "" \
@@ -588,7 +595,7 @@ getgeo() {
     content_line "$UPG_GEO_GETTING"
     get_bin "$TMPDIR"/"${geoname}" bin/geodata/"$geotype"
     if [ "$?" = "1" ]; then
-        content_line "\033[31m$UPG_GEO_FAIL\033[0m"
+        content_line "\033[31m$UPG_DOWNLOAD_FAIL\033[0m"
         error_down
     else
         echo "$geoname" | grep -Eq '.mrs|.srs|.tar.gz' && {
@@ -598,7 +605,7 @@ getgeo() {
         if echo "$geoname" | grep -Eq '.tar.gz'; then
             tar -zxf "$TMPDIR"/"${geoname}" ${tar_para} -C "$BINDIR"/"${geofile}" >/dev/null
             if [ $? -ne 0 ]; then
-                content_line "$UPG_GEO_EXTRACT_FAIL"
+                content_line "$UPG_EXTRACT_FAIL"
                 separator_line "="
                 sleep 1
                 line_break
@@ -609,7 +616,7 @@ getgeo() {
         else
             mv -f "$TMPDIR"/"${geoname}" "$BINDIR"/"${geofile}""${geoname}"
         fi
-        content_line "\033[32m$UPG_GEO_OK\033[0m"
+        content_line "\033[32m${UPG_GEO_OK_PREFIX}${geotype}${UPG_GEO_OK_SUFFIX}\033[0m"
         geo_v="$(echo "$geotype" | awk -F "." '{print $1}')_v"
         setconfig "$geo_v" "$GeoIP_v"
     fi
@@ -622,7 +629,7 @@ getcustgeo() {
     content_line "$UPG_GEO_LINKING"
     webget "$TMPDIR"/"$geoname" "$custgeolink"
     if [ "$?" = "1" ]; then
-        content_line "\033[31m$UPG_GEO_FAIL\033[0m"
+        content_line "\033[31m$UPG_DOWNLOAD_FAIL\033[0m"
         error_down
     else
         echo "$geoname" | grep -Eq '.mrs|.srs' && {
@@ -630,7 +637,7 @@ getcustgeo() {
             [ ! -d "$BINDIR"/ruleset ] && mkdir -p "$BINDIR"/ruleset
         }
         mv -f "$TMPDIR"/"${geoname}" "$BINDIR"/"${geofile}""${geoname}"
-        content_line "\033[32m$UPG_GEO_OK\033[0m"
+        content_line "\033[32m${UPG_GEO_OK_PREFIX}${geotype}${UPG_GEO_OK_SUFFIX}\033[0m"
         separator_line "="
     fi
     sleep 1
@@ -818,7 +825,7 @@ setgeo() {
             ;;
         9)
             while true; do
-                comp_box "\033[33m$UPG_GEO_CLEAN_HINT1\033[0m" \
+                comp_box "\033[33m${UPG_GEO_CLEAN_HINT1_PREFIX}${CRASHDIR}${UPG_GEO_CLEAN_HINT1_SUFFIX}\033[0m" \
                     "$UPG_GEO_CLEAN_HINT2"
                 btm_box "$UPG_GEO_CLEAN_CONFIRM" \
                     "0) $COMMON_BACK"
@@ -859,7 +866,7 @@ getdb() {
     content_line "$UPG_DB_GETTING"
     get_bin "$TMPDIR"/clashdb.tar.gz bin/dashboard/${db_type}.tar.gz
     if [ "$?" = "1" ]; then
-        content_line "\033[31m$UPG_GEO_FAIL\033[0m"
+        content_line "\033[31m$UPG_DOWNLOAD_FAIL\033[0m"
         error_down
         return 1
     else
@@ -867,7 +874,7 @@ getdb() {
         mkdir -p "$dbdir" >/dev/null
         tar -zxf "$TMPDIR/clashdb.tar.gz" ${tar_para} -C "$dbdir" >/dev/null
         if [ $? -ne 0 ]; then
-            content_line "$UPG_GEO_EXTRACT_FAIL"
+            content_line "$UPG_EXTRACT_FAIL"
             separator_line "="
             line_break
             sleep 1
@@ -912,7 +919,7 @@ dbdir() {
         fi
     elif [ -w /www ] && [ -n "$(pidof nginx)" ]; then
         comp_box "$UPG_DB_DIR_SELECT"
-        btm_box "$UPG_DB_DIR_1" \
+        btm_box "${UPG_DB_DIR_1_PREFIX}${CRASHDIR}${UPG_DB_DIR_1_SUFFIX}" \
             "$UPG_DB_DIR_2" \
             "" \
             "0) $COMMON_BACK"
@@ -1028,7 +1035,7 @@ getcrt() {
     content_line "$UPG_DB_GETTING"
     get_bin "$TMPDIR"/ca-certificates.crt bin/fix/ca-certificates.crt echooff
     if [ "$?" = "1" ]; then
-        content_line "\033[31m$UPG_GEO_FAIL\033[0m"
+        content_line "\033[31m$UPG_DOWNLOAD_FAIL\033[0m"
         error_down
     else
         [ "$systype" = 'mi_snapshot' ] && cp -f "$TMPDIR"/ca-certificates.crt "$CRASHDIR"/tools #镜像化设备特殊处理

scripts/menus/fw_filter.sh

@@ -12,11 +12,11 @@ set_fw_filter() {
         [ -z "$quic_rj" ] && quic_rj=OFF
         [ -z "$cn_ip_route" ] && cn_ip_route=OFF
         touch "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter
-        [ -z "$(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null)" ] && mac_return=OFF || mac_return=ON
+        [ -z "$(cat "$CRASHDIR"/configs/mac "$CRASHDIR"/configs/ip_filter 2>/dev/null)" ] && mac_filter_info=OFF || mac_filter_info=ON
-        comp_box "$FWF_ITEM_1" \
+        comp_box "${FWF_ITEM_1_PREFIX}\033[36m$common_ports\033[0m\t${FWF_ITEM_1_SUFFIX}" \
-            "$FWF_ITEM_2" \
+            "${FWF_ITEM_2_PREFIX}\033[36m$mac_filter_info\033[0m\t${FWF_ITEM_2_SUFFIX}" \
-            "$FWF_ITEM_3" \
+            "${FWF_ITEM_3_PREFIX}\033[36m$quic_rj\033[0m\t${FWF_ITEM_3_SUFFIX}" \
-            "$FWF_ITEM_4" \
+            "${FWF_ITEM_4_PREFIX}\033[36m$cn_ip_route\033[0m\t${FWF_ITEM_4_SUFFIX}" \
             "$FWF_ITEM_5" \
             "$FWF_ITEM_6" \
             "" \
@@ -94,7 +94,7 @@ set_common_ports() {
             content_line "$FWF_ALLOWED_PORTS\033[36m$multiport\033[0m"
         fi
         separator_line "="
-        btm_box "$FWF_PORT_MENU_1" \
+        btm_box "${FWF_PORT_MENU_1_PREFIX}\033[36m$common_ports\033[0m${FWF_PORT_MENU_1_SUFFIX}" \
             "$FWF_PORT_MENU_2" \
             "$FWF_PORT_MENU_3" \
             "$FWF_PORT_MENU_4" \
@@ -463,7 +463,7 @@ fw_filter_lan() {
             done
             separator_line "="
         fi
-        btm_box "$FWF_FILTER_SWITCH" \
+        btm_box "${FWF_FILTER_SWITCH_PREFIX}\033[33m$fw_filter_lan_over\033[0m${FWF_FILTER_SWITCH_SUFFIX}" \
             "$FWF_FILTER_ADD_MAC" \
             "$FWF_FILTER_ADD_IP" \
             "$FWF_FILTER_REMOVE" \

scripts/menus/override.sh

@@ -3,10 +3,9 @@
 
 [ -n "$__IS_MODULE_OVERRIDE" ] && return
 __IS_MODULE_OVERRIDE=1
-load_lang override
-
 YAMLSDIR="$CRASHDIR"/yamls
 JSONSDIR="$CRASHDIR"/jsons
+load_lang override
 
 # 配置文件覆写
 override() {
@@ -48,7 +47,7 @@ override() {
             ;;
         9)
             comp_box "\033[33m$OVR_WARN_1\033[0m" \
-                "\033[33m$OVR_WARN_2\033[0m" \
+                "\033[33m${OVR_WARN_2_PREFIX}$crashcore${OVR_WARN_2_SUFFIX}\033[0m" \
                 "\033[33m$OVR_WARN_3\033[0m"
             sleep 2
             btm_box "$OVR_WARN_CONFIRM" \

scripts/menus/providers_singbox.sh

@@ -117,6 +117,7 @@ EOF
     fi
     # 通用部分生成
     [ "$skip_cert" != "OFF" ] && override_tls='true' || override_tls='false'
+	[ -n "$(echo "$2" | grep 'oics.net')" ] && domain_resolver='dns_oix' || domain_resolver='dns_resolver'
     cat >>"$TMPDIR"/providers/providers.json <<EOF
       "health_check": {
         "enabled": true,
@@ -124,6 +125,9 @@ EOF
         "interval": "${interval}m",
         "timeout": "3s"
       },
+	  "override_dialer": {
+        "domain_resolver": "$domain_resolver"
+	  },
       "override_tls": {
         "enabled": true,
         "insecure": $override_tls

scripts/menus/task_cmd.sh

@@ -140,8 +140,8 @@ hotupdate() { #热更新订阅
 
 case "$1" in
     [1-9][0-9][0-9])
-        task_command=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$1" | awk -F '#' '{print $2}')
+        task_command=$(cat "$CRASHDIR"/task/task_${i18n}.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$1" | awk -F '#' '{print $2}')
-        task_name=$(cat "$CRASHDIR"/task/task.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$1" | awk -F '#' '{print $3}')
+        task_name=$(cat "$CRASHDIR"/task/task_${i18n}.list "$CRASHDIR"/task/task.user 2>/dev/null | grep "$1" | awk -F '#' '{print $3}')
         #task_logger "任务$task_name 开始执行"
         eval $task_command && task_res="$TASK_CMD_RES_OK" || task_res="$TASK_CMD_RES_FAIL"
         task_logger "$TASK_CMD_EXEC_PREFIX$2$TASK_CMD_EXEC_MID$task_res"

scripts/starts/clash_modify.sh

@@ -56,6 +56,8 @@ EOF
   respect-rules: true
   nameserver-policy: {'rule-set:cn': [ $dns_nameserver ]}
   proxy-server-nameserver : [ $dns_resolver ]
+  proxy-server-nameserver-policy:
+    '*.oix_nodes.com': '124.221.68.73:1053'
   nameserver: [ $dns_final ]
 EOF
         else

scripts/starts/fw_getlanip.sh

@@ -11,6 +11,7 @@ getlanip() { #获取局域网host地址
                     ip -6 addr show dev $iface 2>/dev/null
                 done | grep 'scope global' | awk '{print $2}' | tr '\n' ' ' | sed 's/ $//'
             )
+			[ -z "$host_ipv6" ] && host_ipv6=$(ip -6 route show | grep -Ev 'default|unreachable|fe80::/|wan|ppp|utun|iot|peer|docker|podman|virbr|vnet|ovs|vmbr|veth|vmnic|vboxnet|lxcbr|xenbr|vEthernet' | awk '{print $1}' | tr '\n' ' ' | sed 's/ $//')
         }
         [ -f "$TMPDIR"/ShellCrash.log ] && break
         [ -n "$host_ipv4" -a "$ipv6_redir" != "ON" ] && break

scripts/starts/fw_iptables.sh

@@ -3,7 +3,7 @@
 
 ckcmd iptables && iptables -h | grep -q '\-w' && iptable='iptables -w' || iptable=iptables
 ckcmd ip6tables && ip6tables -h | grep -q '\-w' && ip6table='ip6tables -w' || ip6table=ip6tables
-    
+	
 start_ipt_route() { #iptables-route通用工具
     #$1:iptables/ip6tables	$2:所在的表(nat/mangle) $3:所在的链(OUTPUT/PREROUTING)	$4:新创建的shellcrash链表	$5:tcp/udp/all
     #区分ipv4/ipv6
@@ -37,6 +37,7 @@ start_ipt_route() { #iptables-route通用工具
     }
     #跳过目标保留地址及目标本机网段
     for ip in $HOST_IP $RESERVED_IP; do
+        [ "$ip" = "default" ] && continue
         "$1" $w -t "$2" -A "$4" -d $ip -j RETURN
     done
     #绕过CN_IP
@@ -65,7 +66,8 @@ start_ipt_route() { #iptables-route通用工具
                     "$1" $w -t "$2" -A "$4" -p "$5" -s $ip -j $JUMP
                 done
         else
-            for ip in $HOST_IP; do #仅限指定网段流量
+            for ip in $HOST_IP; do #仅限指定网段流量 (已修复 default 报错)
+                [ "$ip" = "default" ] && continue
                 "$1" $w -t "$2" -A "$4" -p "$5" -s $ip -j $JUMP
             done
         fi
@@ -123,7 +125,8 @@ start_ipt_dns() { #iptables-dns通用工具
                 "$1" $w -t nat -A "$3" -p udp -s $ip -j REDIRECT --to-ports "$dns_redir_port"
             done
     else
-        for ip in $HOST_IP; do #仅限指定网段流量
+        for ip in $HOST_IP; do #仅限指定网段流量 (已修复 default 报错)
+            [ "$ip" = "default" ] && continue
             "$1" $w -t nat -A "$3" -p tcp -s $ip -j REDIRECT --to-ports "$dns_redir_port"
             "$1" $w -t nat -A "$3" -p udp -s $ip -j REDIRECT --to-ports "$dns_redir_port"
         done
@@ -256,7 +259,8 @@ start_iptables() { #iptables配置总入口
             fi
         }
     }
-    [ "$vm_redir" = "ON" ] && [ -n "$$vm_ipv4" ] && {
+    # 修复了原本双刀号 $$vm_ipv4 会变为进程 PID_ipv4 的语法错误问题
+    [ "$vm_redir" = "ON" ] && [ -n "$vm_ipv4" ] && {
         JUMP="REDIRECT --to-ports $redir_port"                    #跳转劫持的具体命令
         start_ipt_dns iptables PREROUTING shellcrash_vm_dns       #ipv4-局域网dns转发
         start_ipt_route iptables nat PREROUTING shellcrash_vm tcp #ipv4-局域网tcp转发
@@ -289,4 +293,4 @@ start_iptables() { #iptables配置总入口
             $ip6table -I INPUT -p udp --dport 443 $set_cn_ip6 -j REJECT >/dev/null 2>&1
         }
     }
-}
+}

scripts/starts/singbox_modify.sh

@@ -178,6 +178,11 @@ EOF
         "tag": "dns_resolver",
         $(parse_singbox_dns "$dns_resolver")
         "routing_mark": $routing_mark
+      },
+      {
+        "tag": "dns_oix",
+        "type": "udp", "server": "124.221.68.73", "server_port": 1053,
+        "routing_mark": $routing_mark
       }
     ],
     "rules": [
@@ -267,8 +272,8 @@ EOF
         . "$CRASHDIR"/configs/gateway.cfg
         . "$CRASHDIR"/libs/sb_inbounds.sh
     }
-    if [ "$redir_mod" = "Mix" -o "$redir_mod" = "Tun" ]; then
+    if [ "$redir_mod" = "Mix" ] || [ "$redir_mod" = "Tun" ]; then
-        [ "ipv6_redir" = 'ON' ] && ipv6_address='"fe80::e5c5:2469:d09b:609a/64",'
+        [ "$ipv6_redir" = 'ON' ] && ipv6_address='"fd00:face:b00c::1/126",'
         cat >>"$TMPDIR"/jsons/tun.json <<EOF
 {
   "inbounds": [

version

@@ -1 +1 @@
-1.9.5alpha12
+1.9.5alpha13