v1.0.0beta7

~全面兼容Debian/Armbian/Centos等标准Linux系统
~增加配置本机代理功能
~重写启动脚本，优化在不同系统下的启动方式
~支持以systemd方式启动及守护进程
~~大幅度优化优化安装脚本及更新机制，修复cdn更新延迟
~修改定时任务机制，增加稳定性

README.md

@@ -1,31 +1,52 @@
-# clash-for-Miwifi
-在小米等基于openwrt系统的路由器上使用clash做透明代理
+# ShellClash（原Clash for Miwifi）
+在shell环境下一键部署及管理[clash](https://github.com/Dreamacro/clash)
 =====
 
 功能简介：
 --
-~支持小米全系列路由器设备使用clash做透明代理，理论支持各种基于openwrt框架的路由器系统<br>
-~支持SS、SSR、v2ray、trojan、sock5等协议<br>
-~支持批量导入节点链接及订阅链接<br>
-~支持使用网页面板管理规则组<br>
-~支持多种模式切换，支持在线更新<br>
-~支持部署内置的管理面板<br>
-~更多功能可在使用中发掘<br>
+~通过管理脚本在shell环境下便捷使用[clash](https://github.com/Dreamacro/clash)<br>
+~支持在shell环境下管理[clash各种功能](https://lancellc.gitbook.io/clash)<br>
+~支持批量导入SS/SSR/v2ray/trojan节点链接及各种订阅链接<br>
+~支持使用/安装网页面板管理规则组<br>
+~支持局域网透明代理/纯净模式等多种模式切换<br>
+~支持在线更新<br>
 
-使用依赖：
+使用方式：
 --
-~路由器或设备已经开启SSH并获取root权限<br>
-~SSH连接工具，例如putty，bitvise，JuiceSSH（支持安卓手机）等<br>
+~确认路由器或设备已经开启SSH并获取root权限<br>
+~使用SSH连接工具（如putty，JuiceSSH，mac终端）登陆路由器或设备的SSH管理界面<br>
+~在SSH界面执行如下安装命令，并按照提示安装clash管理脚本<br>
+OpenWrt系统：
+```Shell
+sh -c "$(curl -kfsSl --resolve raw.githubusercontent.com:443:199.232.68.133 https://raw.githubusercontent.com/juewuy/ShellClash/master/install.sh)" && source /etc/profile &> /dev/null
+```
+或者
+```Shell
+sh -c "$(curl -kfsSl https://cdn.jsdelivr.net/gh/juewuy/ShellClash/install_cdn.sh)" && source /etc/profile &> /dev/null
+```
+Debian/CenOS/Armbian等默认使用dash的Linux系统：
+```Shell
+bash -c "$(curl -kfsSl --resolve raw.githubusercontent.com:443:199.232.68.133 https://raw.githubusercontent.com/juewuy/ShellClash/master/install.sh)" && source /etc/profile &> /dev/null
+```
+或者
+```Shell
+bash -c "$(curl -kfsSl https://cdn.jsdelivr.net/gh/juewuy/ShellClash/install_cdn.sh)" && source /etc/profile &> /dev/null
+```
+~安装完成管理脚本后，执行如下命令以运行管理脚本<br>
+```Shell
+clash
+```
+
+设备支持：
+--
+~支持小米/红米全系使用官方系统或官方开发版系统的路由器设备（ac2100系列除外）<br>
+~支持所有基于openwrt或使用openwrt二次开发的路由器设备<br>
+~支持各种运行标准Linux系统（Debian/CenOS/Armbian等）的设备<br>
+~如有不兼容的Linux设备或CPU架构请提issue或前往TG群反馈（需提供设备名称及运行uname -a返回的设备核心信息）<br>
 
 更新日志：
 --
-https://github.com/juewuy/clash-for-Miwifi/releases
-
-一键安装：
---
-```Shell
-sh -c "$(curl -kfsSl https://juewuy.xyz/clash/install.sh)" && source /etc/profile &> /dev/null
-```
+https://github.com/juewuy/ShellClash/releases
 
 交流反馈：
 --
@@ -33,27 +54,12 @@ sh -c "$(curl -kfsSl https://juewuy.xyz/clash/install.sh)" && source /etc/profil
 
 已知问题：
 --
-~Tun模式下clash服务可能会和小米路由器内置的tx网游加速器冲突，请谨慎同时使用<br>
-~Redir模式无法转发udp流量，外服游戏可能会受影响，此功能是由官方系统阉割了Tproxy导致，暂时无解，外服游戏用户建议使用Tun模式<br>
+~Tun模式下clash服务可能会和路由器内置的网游加速器冲突，请谨慎同时使用<br>
+~Redir模式暂不支持转发udp流量，外服游戏可能会受影响，外服游戏用户建议使用Tun模式<br>
+~部分设备长时间使用会出现内存占用偏高——此为golang内存回收不及时导致，可以通过屏蔽p2p流量及设置每日定时重启核心以缓解<br>
+~节点无法连接——在【clash功能设置】中打开【跳过本地证书验证】<br>
+~非OpenWrt系统下定时任务不工作，待修复<br>
 
-ToDo：
+友情推广：
 --
-~~增加订阅功能~~<br>
-~~添加一键安装脚本~~<br>
-~~增加屏蔽P2P流量功能~~<br>
-~~增加更新功能~~<br>
-~~修复redir-host DNS以及IPV6支持~~<br>
-~~增加定时功能~~<br>
-~~增加屏蔽局域网设备~~<br>
-~~增加更多设备支持~~<br>
-
-感谢：
---
-~https://lancellc.gitbook.io/clash/start-clash/clash-tun-mode<br>
-~https://comzyh.gitbook.io/clash/<br>
-~https://h-cheung.gitlab.io/post/使用_clash_和路由表实现透明代理<br>
-~https://www.right.com.cn/forum/thread-4042741-1-1.html<br>
-
-请喝杯茶：
---
- ![](https://juewuy.xyz/clash/others/qrcodevx.png)
+https://dler.best/auth/register?affid=89698

bin/version

@@ -1,2 +1,2 @@
-GeoIP_v=20200824
-versionsh=0.9.10
+GeoIP_v=20200917
+versionsh=1.0.0beta7

install.sh

@@ -1,24 +1,22 @@
- #!/bin/sh
+#! /bin/bash
 # Copyright (C) Juewuy
 
 echo "***********************************************"
 echo "**                 欢迎使用                  **"
-echo "**             Clash for Miwifi              **"
+echo "**                ShellClash                 **"
 echo "**                             by  Juewuy    **"
 echo "***********************************************"
-
-url="https://juewuy.xyz/clash/"
-result=$(curl -w %{http_code} -skLo /tmp/clashversion $url/bin/version)
-[ "$result" != "200" ] && echo "无法连接到服务器！" && exit 1
-source /tmp/clashversion
+url="https://cdn.jsdelivr.net/gh/juewuy/ShellClash"
+release_new=$(curl -kfsSL --resolve api.github.com:443:140.82.113.5 "https://api.github.com/repos/juewuy/ShellClash/releases/latest" | grep "tag_name" | head -n 1 | awk -F ":" '{print $2}' | sed 's/\"//g;s/,//g;s/ //g')
+[ -z "$release_new" ] && release_new=$(curl -kfsSL $url/bin/version | grep "versionsh" | awk -F "=" '{print $2}')
+[ -z "$release_new" ] && echo "无法连接服务器！" && exit
+echo -e "最新版本：\033[32m$release_new\033[0m"
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "~~~~版本：\033[32m$versionsh\033[0m"
+echo -e "\033[44m如遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo -e "\033[37m支持各种基于openwrt的路由器设备"
+echo -e "\033[33m有限兼容debian、centos等Linux系统\033[0m"
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[44m使用中如遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
-echo -e "\033[37m目前仅支持小米AX系列3款路由器"
-echo -e "\033[44m其余型号可到TG群报名参与测试\033[0m"
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[32m 1 在默认目录(/etc)安装Clash for Miwifi"
+echo -e "\033[32m 1 在默认目录(/etc)安装ShellClash"
 echo -e "\033[33m 2 手动设置安装目录（不明勿用！）"
 echo -e "\033[0m 0 退出安装"
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -27,9 +25,9 @@ read -p "请输入相应数字 > " num
 if [ -z $num ];then
 	echo 安装已取消
 	exit;
-elif [[ $num == 1 ]];then
+elif [ "$num" = "1" ];then
 	dir=/etc
-elif [[ $num == 2 ]];then
+elif [ "$num" = "2" ];then
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	echo '可用路径 剩余空间:'
 	df -h | awk '{print $6,$2}'| sed 1d 
@@ -47,7 +45,7 @@ fi
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo 开始从服务器获取安装文件！
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-tarurl=$url/bin/clashfm.tar.gz
+tarurl=$url@$release_new/bin/clashfm.tar.gz
 if command -v curl &> /dev/null; then
 	result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $tarurl)
 else $result
@@ -61,26 +59,43 @@ echo 开始解压文件！
 mkdir -p $dir/clash > /dev/null
 tar -zxvf '/tmp/clashfm.tar.gz' -C $dir/clash/
 [ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+#判断系统类型写入不同的启动文件
+if [ -n "$(cat /proc/version | grep -i openwrt)" ];then
+	mv $dir/clash/clashservice /etc/init.d/clash #将rc服务文件移动到系统目录
+	chmod  777 /etc/init.d/clash #授予权限
+	rm -rf $dir/clash/clash.service 
+else
+	[ -d /etc/systemd/system ] && sysdir=/etc/systemd/system
+	[ -d /usr/lib/systemd/system/ ] && sysdir=/usr/lib/systemd/system/ 
+	mv $dir/clash/clash.service $sysdir/clash.service #将service服务文件移动到系统目录
+	sed -i "s%/etc/clash%${dir}/clash%g" $sysdir/clash.service
+	rm -rf $dir/clash/clashservice
+	rm -rf /etc/init.d/clash
+fi
 #初始化文件目录
-mv $dir/clash/clashservice /etc/init.d/clash #将clash服务文件移动到系统目录
-chmod  777 /etc/init.d/clash #授予权限
 if [ ! -f "$dir/clash/mark" ]; then
 cat >$dir/clash/mark<<EOF
 #标识clash运行状态的文件，不明勿动！
 EOF
 fi
+#修饰文件及版本号
+shtype=sh && [ -n "$(ls -l /bin/sh|grep -o dash)" ] && shtype=bash 
+sed -i "s%#!/bin/sh%#!/bin/$shtype%g" $dir/clash/start.sh
+chmod  777 $dir/clash/start.sh
 sed -i '/versionsh_l=*/'d $dir/clash/mark
-sed -i "1i\versionsh_l=$versionsh" $dir/clash/mark
+sed -i "1i\versionsh_l=$release_new" $dir/clash/mark
 #设置环境变量
+
 sed -i '/alias clash=*/'d /etc/profile
-echo "alias clash=\"sh $dir/clash/clash.sh\"" >> /etc/profile #设置快捷命令环境变量
+echo "alias clash=\"$shtype $dir/clash/clash.sh\"" >> /etc/profile #设置快捷命令环境变量
 sed -i '/export clashdir=*/'d /etc/profile
 echo "export clashdir=\"$dir/clash\"" >> /etc/profile #设置clash路径环境变量
 #删除临时文件
 rm -rf /tmp/clashfm.tar.gz 
 #提示
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo clash for Miwifi 已经安装成功!
-echo -e "\033[33m直接输入\033[30;47m clash \033[0;33m命令即可管理！！！\033[0m"
+echo ShellClash 已经安装成功!
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[33m输入\033[30;47m clash \033[0;33m命令即可管理！！！\033[0m"
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

install_cdn.sh

@@ -0,0 +1,101 @@
+#! /bin/bash
+# Copyright (C) Juewuy
+
+echo "***********************************************"
+echo "**                 欢迎使用                  **"
+echo "**                ShellClash                 **"
+echo "**                             by  Juewuy    **"
+echo "***********************************************"
+url="https://cdn.jsdelivr.net/gh/juewuy/ShellClash"
+release_new=$(curl -kfsSL --resolve api.github.com:443:140.82.113.5 "https://api.github.com/repos/juewuy/ShellClash/releases/latest" | grep "tag_name" | head -n 1 | awk -F ":" '{print $2}' | sed 's/\"//g;s/,//g;s/ //g')
+[ -z "$release_new" ] && release_new=$(curl -kfsSL $url/bin/version | grep "versionsh" | awk -F "=" '{print $2}')
+[ -z "$release_new" ] && echo "无法连接服务器！" && exit
+echo -e "最新版本：\033[32m$release_new\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[44m如遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo -e "\033[37m支持各种基于openwrt的路由器设备"
+echo -e "\033[33m有限兼容debian、centos等Linux系统\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[32m 1 在默认目录(/etc)安装ShellClash"
+echo -e "\033[33m 2 手动设置安装目录（不明勿用！）"
+echo -e "\033[0m 0 退出安装"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+read -p "请输入相应数字 > " num
+
+if [ -z $num ];then
+	echo 安装已取消
+	exit;
+elif [ "$num" = "1" ];then
+	dir=/etc
+elif [ "$num" = "2" ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo '可用路径 剩余空间:'
+	df -h | awk '{print $6,$2}'| sed 1d 
+	echo '路径是必须带 / 的格式，写入虚拟内存(/tmp,/sys,..)的文件会在重启后消失！！！'
+	read -p "请输入自定义路径 > " dir
+	if [ -z $dir ];then
+		echo 路径错误！已取消安装！
+		exit;
+	fi
+else
+	echo 安装已取消
+	exit;
+fi
+#下载文件包
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始从服务器获取安装文件！
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+tarurl=$url@$release_new/bin/clashfm.tar.gz
+if command -v curl &> /dev/null; then
+	result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $tarurl)
+else $result
+	wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $tarurl
+	[ $? -eq 0 ] && result="200"
+fi
+[ "$result" != "200" ] && echo "文件下载失败！" && exit 1
+#解压
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始解压文件！
+mkdir -p $dir/clash > /dev/null
+tar -zxvf '/tmp/clashfm.tar.gz' -C $dir/clash/
+[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+#判断系统类型写入不同的启动文件
+if [ -n "$(cat /proc/version | grep -i openwrt)" ];then
+	mv $dir/clash/clashservice /etc/init.d/clash #将rc服务文件移动到系统目录
+	chmod  777 /etc/init.d/clash #授予权限
+	rm -rf $dir/clash/clash.service 
+else
+	[ -d /etc/systemd/system ] && sysdir=/etc/systemd/system
+	[ -d /usr/lib/systemd/system/ ] && sysdir=/usr/lib/systemd/system/ 
+	mv $dir/clash/clash.service $sysdir/clash.service #将service服务文件移动到系统目录
+	sed -i "s%/etc/clash%${dir}/clash%g" $sysdir/clash.service
+	rm -rf $dir/clash/clashservice
+	rm -rf /etc/init.d/clash
+fi
+#初始化文件目录
+if [ ! -f "$dir/clash/mark" ]; then
+cat >$dir/clash/mark<<EOF
+#标识clash运行状态的文件，不明勿动！
+EOF
+fi
+#修饰文件及版本号
+shtype=sh && [ -n "$(ls -l /bin/sh|grep -o dash)" ] && shtype=bash 
+sed -i "s%#!/bin/sh%#!/bin/$shtype%g" $dir/clash/start.sh
+chmod  777 $dir/clash/start.sh
+sed -i '/versionsh_l=*/'d $dir/clash/mark
+sed -i "1i\versionsh_l=$release_new" $dir/clash/mark
+#设置环境变量
+
+sed -i '/alias clash=*/'d /etc/profile
+echo "alias clash=\"$shtype $dir/clash/clash.sh\"" >> /etc/profile #设置快捷命令环境变量
+sed -i '/export clashdir=*/'d /etc/profile
+echo "export clashdir=\"$dir/clash\"" >> /etc/profile #设置clash路径环境变量
+#删除临时文件
+rm -rf /tmp/clashfm.tar.gz 
+#提示
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo ShellClash 已经安装成功!
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[33m输入\033[30;47m clash \033[0;33m命令即可管理！！！\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+

scripts/clash.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=clash
+After=network.target
+
+[Service]
+Type=simple
+User=root
+ExecStart=/etc/clash/clash -d /etc/clash
+ExecStartPost=/etc/clash/start.sh afstart
+Restart=on-failure
+RestartSec=3s
+
+
+[Install]
+WantedBy=multi-user.target

scripts/clash.sh

@@ -1,19 +1,33 @@
- #!/bin/sh
+#!/bin/sh
 # Copyright (C) Juewuy
 
 getconfig(){
+#系统类型
+systype=$(cat /proc/version | grep -io openwrt)
+if [ -n "$systype" ];then
+	host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
+	if [ -f /etc/rc.d/*clash ];then
+		autostart=enable_rc
+	else
+		autostart=disable_rc
+	fi
+else
+	cron_user='root '
+	host=$(ip a|grep -w 'inet'|grep 'global'|grep -E '192.|10.'|sed 's/.*inet.//g'|sed 's/\/[0-9][0-9].*$//g')
+	[ -z $host ] && host=127.0.0.1
+	if [ -n "$(systemctl list-unit-files clash.service | grep -o enable)" ];then
+		autostart=enable_sys
+	else
+		autostart=disable_sys
+	fi
+fi
 #服务器地址
-if [ -z "$update_url" ]; then
-	update_url=https://cdn.jsdelivr.net/gh/juewuy/clash-for-Miwifi@latest
-fi
+[ -z "$update_url" ] && update_url=https://cdn.jsdelivr.net/gh/juewuy/ShellClash
 #文件路径
-if [ -z "$clashdir" ];then
-clashdir=$(dirname $(readlink -f "$0"))
-echo "export clashdir=\"$clashdir\"" >> /etc/profile
-fi
+[ -z "$clashdir" ] && clashdir=$(dirname $(readlink -f "$0")) && echo "export clashdir=\"$clashdir\"" >> /etc/profile
 ccfg=$clashdir/mark
 yaml=$clashdir/config.yaml
-#检查标识文件
+#检查/读取标识文件
 if [ ! -f $ccfg ]; then
 	echo mark文件不存在，正在创建！
 	cat >$ccfg<<EOF
@@ -27,7 +41,7 @@ source $ccfg
 if [ "$start_old" = "已开启" ];then
 	auto="\033[33m已设置保守模式！\033[0m"
 	auto1="\033[36m设为\033[0m常规模式启动"
-elif [ -f /etc/rc.d/*clash ];then
+elif [ "$autostart" = "enable_rc" -o "$autostart" = "enable_sys" ]; then
 	auto="\033[32m已设置开机启动！\033[0m"
 	auto1="\033[36m禁用\033[0mclash开机启动"
 else
@@ -40,11 +54,10 @@ if [ -z "$redir_mod" ];then
 	redir_mod=Redir模式
 fi
 #获取运行状态
-status=`ps |grep -w 'clash'|grep -v grep|grep -v clash.sh|wc -l`
-if [[ $status -gt 0 ]];then
+PID=$(pidof clash)
+if [ -n "$PID" ];then
 	run="\033[32m正在运行（$redir_mod）\033[0m"
-	uid=`ps |grep -w 'clash'|grep -v grep|grep -v clash.sh|awk '{print $1}'`
-	VmRSS=`cat /proc/$uid/status|grep -w VmRSS|awk '{print $2,$3}'`
+	VmRSS=`cat /proc/$PID/status|grep -w VmRSS|awk '{print $2,$3}'`
 	#获取运行时长
 	if [ -n "$start_time" ]; then 
 		time=$((`date +%s`-$start_time))
@@ -62,21 +75,21 @@ fi
 #输出状态
 
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[30;46m欢迎使用Clash for Miwifi！\033[0m      版本：$versionsh_l"
+echo -e "\033[30;46m欢迎使用ShellClash！\033[0m      版本：$versionsh_l"
 echo -e "Clash服务"$run"，"$auto""
-if [ $status -gt 0 ];then
+if [ -n "$PID" ];then
 	echo -e "当前内存占用：\033[44m"$VmRSS"\033[0m，已运行：\033[46;30m"$day"\033[44;37m"$time"\033[0m"
 fi
-echo -e "博客：\033[36;4mhttps://juewuy.xyz\033[0m，TG群：\033[36;4mhttps://t.me/clashfm\033[0m"
+echo -e "TG群：\033[36;4mhttps://t.me/clashfm\033[0m"
 echo -----------------------------------------------
-#安装clash核心
+#检查clash核心
 if [ ! -f $clashdir/clash ];then
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	echo -e "\033[31m没有找到核心文件，请先下载clash核心！\033[0m"
 	source $clashdir/getdate.sh
 	getcore
 fi
-#安装GeoIP数据库
+#检查GeoIP数据库
 if [ ! -f $clashdir/Country.mmdb ];then
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	echo -e "\033[31m没有找到GeoIP数据库文件，请先下载数据库！\033[0m"
@@ -85,54 +98,37 @@ if [ ! -f $clashdir/Country.mmdb ];then
 	clashstart
 fi
 }
-clashstop(){
-	source $clashdir/start.sh && stop_old
-	/etc/init.d/clash stop > /dev/null 2>&1
-}
 clashstart(){
 	if [ ! -f "$yaml" ];then
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[31m没有找到配置文件，请先导入节点/订阅链接！\033[0m"
 		clashlink
 	fi
-	if [ $status -gt 0 ];then
+	if [ -n "$PID" ];then
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		clashstop
+		$clashdir/start.sh stop
 		echo -e "\033[31mClash服务已停止！\033[0m"
 	fi
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	if [ "$start_old" = "已开启" ];then
-		source $clashdir/start.sh && start_old
-		sleep 1
-		status=`ps |grep -w 'clash'|grep -v grep|grep -v clash.sh`
-		if [ -z "$status" ];then
-			echo -e "\033[31mclash启动失败！\033[0m" 
-			sed -i /start_old=*/d $ccfg
-			exit
-		fi
-	else
-		/etc/init.d/clash start
-		sleep 1
-		status=`ps |grep -w 'clash'|grep -v grep|grep -v clash.sh`
-		if [ -z "$status" ];then
-			echo -e "\033[31mclash启动失败！尝试使用保守方式启动！\033[0m"
-			source $clashdir/start.sh && start_old
-			sleep 1
-			status=`ps |grep -w 'clash'|grep -v grep|grep -v clash.sh`
-			if [ -z "$status" ];then
-				echo -e "\033[31mclash启动失败！\033[0m" 
-				sed -i /start_old=*/d $ccfg
-				exit
-			fi
-		fi
+	$clashdir/start.sh start
+	sleep 1
+	PID=$(pidof clash)
+	if [ -z "$PID" ];then
+		echo -e "\033[31mclash启动失败！\033[0m" 
+		exit
 	fi
 
-	host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
 	echo -e "\033[32mclash服务已启动！\033[0m"
-	echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
-	echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m 9999 \033[0m"
-	echo -e "也可前往更新菜单安装本地Dashboard面板，连接更稳定！\033[0m"
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	if [ -d /www/clash ];then
+		echo -e "请使用\033[30;47m http://$host/clash \033[0m管理内置规则"
+	elif [ -d $clashdir/ui  ];then
+		echo -e "请使用\033[30;47m http://$host:9999/ui \033[0m管理内置规则"
+	else
+		echo -e "可使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
+		echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m 9999 \033[0m"
+		echo -e "也可前往更新菜单安装本地Dashboard面板，连接更稳定！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	fi
 }
 clashlink(){
 #获取订阅规则
@@ -153,7 +149,7 @@ echo -----------------------------------------------
 echo -e " 1 导入\033[36m节点/订阅\033[0m链接"
 echo -e " 2 使用完整clash规则链接"
 echo -e " 3 添加/修改\033[32m节点过滤\033[0m关键字 \033[47;30m$exclude\033[0m"
-echo -e " 4 选取\033[33m配置规则\033[0m模版"
+echo -e " 4 选取\033[33mclash配置规则\033[0m模版"
 echo -e " 5 选择在线生成服务器"
 echo -e " 6 \033[36m还原\033[0m配置文件"
 echo -e " 7 \033[32m手动更新\033[0m订阅"
@@ -259,10 +255,10 @@ fi
 }
 clashcfg(){
 #获取设置默认显示
-[ -z "$skip_cert" ] && skip_cert=未开启
-[ -z "$common_ports" ] && common_ports=未开启
+[ -z "$skip_cert" ] && skip_cert=已开启
+[ -z "$common_ports" ] && common_ports=已开启
 [ -z "$dns_mod" ] && dns_mod=redir_host
-[ -z "$dns_over" ] && dns_over=未开启
+[ -z "$dns_over" ] && dns_over=已开启
 if [ -z "$(cat $clashdir/mac)" ]; then
 	mac_return=未开启
 else
@@ -302,6 +298,8 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		echo " 3 混合模式： 仅使用Tun转发UPD流量"
 		echo "              CPU和内存占用较高"
 		echo "              不推荐使用redir-host"
+		echo " 4 纯净模式： 不设置iptables静态路由"
+		echo "              必须手动配置http/sock5代理"
 		echo " 0 返回上级菜单"
 		read -p "请输入对应数字 > " num	
 		if [ -z "$num" ]; then
@@ -326,7 +324,19 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 				echo -e "\033[31m当前核心不支持开启Tun模式！请先切换clash核心！！！\033[0m"
 				clashcfg
 			fi
-			redir_mod=混合模式		
+			redir_mod=混合模式	
+		elif [[ $num == 4 ]]; then
+			redir_mod=纯净模式			
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[32m已经设置为纯净模式！\033[0m"
+			echo -e "\033[33m当前模式必须手动在设备WiFi或应用中配置HTTP或sock5代理\033[0m"
+			echo -e "HTTP/SOCK5代理服务器地址：\033[30;47m$host\033[0m;端口均为：\033[30;47m7890\033[0m"
+			echo -e "\033[31m也可以使用PAC自动代理文件，具体使用方法请自行搜索\033[0m"
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			read -p "是否配置自动代理PAC文件(1/0) > " res
+				if [ "$res" = 1 ]; then
+					source $clashdir/getdate.sh && catpac
+				fi
 		else
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			echo -e "\033[31m请输入正确的数字！\033[0m"
@@ -346,7 +356,7 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		echo -e "\033[33m切换模式后需要手动重启clash服务以生效！\033[0m"
 		echo -----------------------------------------------
 		echo " 1 fake-ip模式：   响应速度更快"
-		echo "                   但可能和部分软件有冲突"
+		echo "                   不兼容部分软件"
 		echo " 2 redir_host模式：使用稳定，兼容性好"
 		echo "                   不支持Tun模式"
 		echo " 0 返回上级菜单"
@@ -502,6 +512,7 @@ clashadv(){
 [ -z "$modify_yaml" ] && modify_yaml=未开启
 [ -z "$ipv6_support" ] && ipv6_support=未开启
 [ -z "$start_old" ] && start_old=未开启
+[ -z "$local_proxy" ] && local_proxy=未开启
 #
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[30;47m欢迎使用进阶模式菜单：\033[0m"
@@ -509,9 +520,11 @@ echo -e "\033[33m如您不是很了解clash的运行机制，请勿更改！\033
 echo -e "\033[32m修改配置后请手动重启clash服务！\033[0m"
 echo -----------------------------------------------
 echo -e " 1 不修饰config.yaml:	\033[36m$modify_yaml\033[0m   ————用于使用自定义配置"
-echo -e " 2 启用ipv6支持:     	\033[36m$ipv6_support\033[0m   ————实验性且不兼容Fake_ip"
+echo -e " 2 启用ipv6支持:	\033[36m$ipv6_support\033[0m   ————实验性且不兼容Fake_ip"
 echo -e " 3 使用保守方式启动:	\033[36m$start_old\033[0m   ————切换时会停止clash服务"
+echo -e " 4 代理本机流量:	\033[36m$local_proxy\033[0m   ————配置本机代理环境变量"
 echo -----------------------------------------------
+echo -e " 8 \033[31m重置\033[0m配置文件"
 echo -e " 9 \033[32m重启\033[0mclash服务"
 echo -e " 0 返回上级菜单 \033[0m"
 echo -----------------------------------------------
@@ -561,16 +574,46 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 			echo -e "\033[33m改为使用保守方式启动clash服务！！\033[0m"
 			echo -e "\033[36m此模式兼容性更好但无法禁用开机启动！！\033[0m"
 			start_old=已开启
-			/etc/init.d/clash stop > /dev/null 2>&1
+			$clashdir/start.sh stop > /dev/null 2>&1
 			sleep 2
 		else
 			sed -i "1i\start_old=未开启" $ccfg
 			echo -e "\033[32m改为使用默认方式启动clash服务！！\033[0m"
 			start_old=未开启
-			source $clashdir/start.sh && stop_old
+			$clashdir/start.sh stop > /dev/null 2>&1
 		fi
 		clashadv  
-
+		
+	elif [[ $num == 4 ]]; then	
+		sed -i '/local_proxy*/'d $ccfg
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		if [ "$local_proxy" = "未开启" ] > /dev/null 2>&1; then 
+			sed -i "1i\local_proxy=已开启" $ccfg
+			local_proxy=已开启
+			echo 'export http_proxy=http://127.0.0.1:7890' >> /etc/profile
+			echo 'export https_proxy=http://127.0.0.1:7890' >> /etc/profile
+			echo -e "\033[32m已经将代理参数写入环境变量~\033[0m"
+			echo -e "\033[36m如未生效，请重新登录或者重启设备！\033[0m"
+			sleep 1
+		else
+			sed -i "1i\local_proxy=未开启" $ccfg
+			echo -e "\033[33m已经将代理参数从环境变量移除！！\033[0m"
+			local_proxy=未开启
+			sed -i '/http*_proxy/'d /etc/profile
+		fi
+		source /etc/profile > /dev/null 2>&1
+		clashadv 		
+		
+	elif [[ $num == 8 ]]; then	
+		read -p "确认重置配置文件？(1/0) > " res
+		if [ "$res" = "1" ];then
+			echo "versionsh_l=$versionsh_l" > $ccfg
+			echo "start_time=$start_time" >> $ccfg
+			echo "#标识clash运行状态的文件，不明勿动！" >> $ccfg
+			echo -e "\033[33m配置文件已重置，请重新运行脚本！\033[0m"
+			exit
+		fi
+		clashadv
 		
 	elif [[ $num == 9 ]]; then	
 		clashstart
@@ -587,18 +630,27 @@ fi
 exit;
 }
 update(){
+if [ -z "$release_new" ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[33m正在检查更新！\033[0m"
+	release_new=$(curl -kfsSL --resolve api.github.com:443:140.82.113.5 "https://api.github.com/repos/juewuy/ShellClash/releases/latest" | grep "tag_name" | head -n 1 | awk -F ":" '{print $2}' | sed 's/\"//g;s/,//g;s/ //g')
+	[ -z "$release_new" ] && release_new=$(curl -kfsSL $update_url/bin/version | grep "versionsh" | awk -F "=" '{print $2}')
+	[ -z "$release_new" ] && echo "检查更新失败！"
+fi
+[ "$update_url" = "https://cdn.jsdelivr.net/gh/juewuy/ShellClash" ] && update_url=$update_url@$release_new
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[30;47m欢迎使用更新功能：\033[0m"
-echo -e "感谢：\033[32mClash \033[0m作者\033[36m Dreamacro\033[0m 项目地址：\033[32mhttps://github.com/Dreamacro/clash\033[0m"
-echo -e "感谢：\033[32mClashR \033[0m作者\033[36m BROBIRD\033[0m 项目地址：\033[32mhttps://github.com/BROBIRD/clash\033[0m"
-echo -e "感谢：\033[32m更多的帮助过我的人！\033[0m"
+[ -n "$release_new" ] && echo -e "当前ShellClash版本：\033[33m $versionsh_l \033[0m"
+[ -n "$release_new" ] && echo -e "最新ShellClash版本：\033[32m $release_new \033[0m"
 echo -----------------------------------------------
 echo -e " 1 更新\033[36m管理脚本\033[0m"
 echo -e " 2 切换\033[33mclash核心\033[0m"
 echo -e " 3 更新\033[32mGeoIP数据库\033[0m"
 echo -e " 4 安装本地\033[35mDashboard\033[0m面板"
+echo -e " 5 生成本地PAC文件(需先安装本地面板)"
 echo -----------------------------------------------
-echo -e " 8 切换\033[36m安装源\033[0m地址"
+echo -e " 7 切换\033[36m安装源\033[0m地址"
+echo -e " 8 鸣谢"
 echo -e " 9 \033[31m卸载\033[34mClash for Miwfi\033[0m"
 echo -e " 0 返回上级菜单" 
 echo -----------------------------------------------
@@ -624,10 +676,22 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		source $clashdir/getdate.sh
 		getdb
 		
-	elif [[ $num == 8 ]]; then	
+	elif [[ $num == 5 ]]; then	
+		source $clashdir/getdate.sh
+		catpac
+		update
+
+	elif [[ $num == 7 ]]; then	
 		source $clashdir/getdate.sh
 		setserver
 		
+	elif [[ $num == 8 ]]; then		
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "感谢：\033[32mClash \033[0m作者\033[36m Dreamacro\033[0m 项目地址：\033[32mhttps://github.com/Dreamacro/clash\033[0m"
+		echo -e "感谢：\033[32malecthw大神提供的GeoIP数据库\033[0m 项目地址：\033[32mhttps://github.com/alecthw/mmdb_china_ip_list\033[0m"
+		echo -e "感谢：\033[32m更多的帮助过我的人！\033[0m"
+		update	
+		
 	elif [[ $num == 9 ]]; then
 		read -p "确认卸载clash？（警告：该操作不可逆！）[1/0] " res
 		if [ "$res" = '1' ]; then
@@ -635,11 +699,15 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 			/etc/init.d/clash stop
 			rm -rf $clashdir
 			rm -rf /etc/init.d/clash
+			rm -rf /etc/systemd/system/clash.service
+			rm -rf /usr/lib/systemd/system/clash.service
 			rm -rf /www/clash
 			rm -rf $csh
 			sed -i '/alias clash=*/'d /etc/profile
 			sed -i '/export clashdir=*/'d /etc/profile
+			source /etc/profile > /dev/null 2>&1
 			echo 已卸载clash相关文件！
+			exit
 		fi
 		echo -e "\033[31m操作已取消！\033[0m"
 		exit;
@@ -719,20 +787,17 @@ clashcron(){
 	read -p  "是否确认添加定时任务？(1/0) > " res
 		if [ "$res" = '1' ]; then
 			sed -i /$cronname/d $cronpath
-			echo "$min $hour * * $week $cronset >/dev/null 2>&1 #$week1的$hour点$min分$cronname" >> $cronpath
+			echo "$min $hour * * $week $cron_user$cronset >/dev/null 2>&1 #$week1的$hour点$min分$cronname" >> $cronpath
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			echo -e "\033[31m定时任务已添加！！！\033[0m"
 		fi
 		clashcron
 	}
 	checkcron(){
-	if [ -d /etc/crontabs/ ]; then 
-		cronpath="/etc/crontabs/root"
-	elif [ -d /var/spool/cron/ ]; then
-		cronpath="/var/spool/cron/root"
-	elif [ -d /var/spool/cron/crontabs/ ]; then
-		cronpath="/var/spool/cron/crontabs/root"
-	else
+	[ -d /etc/crontabs/ ]&&cronpath="/etc/crontabs/root"
+	[ -d /var/spool/cron/ ]&&cronpath="/var/spool/cron/root"
+	[ -d /var/spool/cron/crontabs/ ]&&cronpath="/var/spool/cron/crontabs/root"
+	if [ -z $cronpath ];then
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo "找不到定时任务文件,无法添加定时任务！"
 		clashsh
@@ -745,8 +810,8 @@ echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[30;47m欢迎使用定时任务功能：\033[0m"
 echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
 echo -----------------------------------------------
-echo  -e "\033[33m当前已经添加的定时任务有：\033[36m"
-crontab -l | egrep -o '#.*' 
+echo  -e "\033[33m已添加的定时任务：\033[36m"
+cat $cronpath | egrep -o ' #.*' 
 echo -e "\033[0m"-----------------------------------------------
 echo -e " 1 设置\033[33m定时重启\033[0mclash服务"
 echo -e " 2 设置\033[31m定时停止\033[0mclash服务"
@@ -765,19 +830,19 @@ elif [[ $num == 0 ]]; then
 	
 elif [[ $num == 1 ]]; then
 	cronname=重启clash服务
-	cronset='source /etc/profile && source $clashdir/start.sh && restart'
+	cronset="$clashdir/start.sh restart"
 	setcron
 elif [[ $num == 2 ]]; then
 	cronname=停止clash服务
-	cronset='source /etc/profile && source $clashdir/start.sh && stop'
+	cronset="$clashdir/start.sh stop"
 	setcron
 elif [[ $num == 3 ]]; then
 	cronname=开启clash服务
-	cronset='source /etc/profile && source $clashdir/start.sh && start'
+	cronset="$clashdir/start.sh start"
 	setcron
 elif [[ $num == 4 ]]; then	
 	cronname=更新订阅链接
-	cronset="source /etc/profile && source $clashdir/getdate.sh && getyaml"
+	cronset="$clashdir/start.sh getyaml"
 	setcron	
 	
 else
@@ -815,7 +880,7 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		clashcfg
 
 	elif [[ $num == 3 ]]; then
-		clashstop
+		$clashdir/start.sh stop
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[31mClash服务已停止！\033[0m"
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -828,12 +893,20 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 			sed -i "1i\start_old=未开启" $ccfg
 			echo -e "\033[32m已设为使用默认方式启动clash服务！！\033[0m"
 			start_old=未开启
-		elif [ -f /etc/rc.d/*clash ]; then
+		elif [ "$autostart" = "enable_rc" ]; then
 			/etc/init.d/clash disable
 			echo -e "\033[33m已禁止Clash开机启动！\033[0m"
-		else
+		elif [ "$autostart" = "disable_rc" ]; then
 			/etc/init.d/clash enable
 			echo -e "\033[32m已设置Clash开机启动！\033[0m"
+		elif [ "$autostart" = "enable_sys" ]; then
+			systemctl disable clash.service > /dev/null 2>&1
+			echo -e "\033[33m已禁止Clash开机启动！\033[0m"
+		elif [ "$autostart" = "disable_sys" ]; then
+			systemctl enable clash.service > /dev/null 2>&1
+			echo -e "\033[32m已设置Clash开机启动！\033[0m"
+		else
+			echo -e "\033[32m当前系统不支持设置开启启动！\033[0m"
 		fi
 		clashsh
 
@@ -850,6 +923,8 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[30;47m这里是测试命令菜单\033[0m"
 		echo -e "\033[33m如遇问题尽量运行相应命令后截图发群\033[0m"
+		echo -e "磁盘占用/所在目录："
+		du -h $clashdir
 		echo -----------------------------------------------
 		echo " 1 查看clash运行时的报错信息"
 		echo " 2 查看系统DNS端口(:53)占用 "
@@ -867,15 +942,17 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		elif [[ $num == 0 ]]; then
 			clashsh
 		elif [[ $num == 1 ]]; then
-			/etc/init.d/clash stop
-			echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
+			$clashdir/start.sh stop
+			echo -----------------------------------------------
 			$clashdir/clash -d $clashdir & { sleep 3 ; kill $! & }
+			echo -----------------------------------------------
 			echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
 			exit;
 		elif [[ $num == 2 ]]; then
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			netstat -ntulp |grep 53
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "可以使用\033[44m netstat -ntulp |grep xxx \033[0m来查询任意(xxx)端口"
 			exit;
 		elif [[ $num == 3 ]]; then
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

scripts/clashservice

@@ -8,12 +8,6 @@ START=92
 start_service() {
 	#开机加载环境变量保证找到文件路径
 	source /etc/profile > /dev/null 2>&1
-	#加载修饰脚本
-	source $clashdir/start.sh
-	#读取配置文件
-	getconfig
-	#使用内置规则强行覆盖config配置文件
-	[ "$modify_yaml" != "已开启" ] && modify_yaml
     #创建clash后台进程
 	procd_open_instance
 	procd_set_param respawn
@@ -21,17 +15,6 @@ start_service() {
 	procd_set_param stdout 1
 	procd_set_param command $clashdir/clash -d $clashdir
 	procd_close_instance
-	#修改iptables规则使流量进入clash
-	stop_iptables
-	start_dns
-	[ "$redir_mod" != "Tun模式" ] && start_redir
-	#标记启动时间
-	mark_time
-	#标记启动方式
-	sed -i /start_old=*/d $ccfg
-	sed -i "1i\start_old=未开启" $ccfg	
+	#其他设置
+	sh $clashdir/start.sh afstart
 }
-stop_service() {
-	source $clashdir/start.sh
-	stop_iptables
-}

scripts/getdate.sh

@@ -1,158 +1,6 @@
-#!/bin/sh
+#!/bin/bash
 # Copyright (C) Juewuy
 
-getyaml(){
-ccfg=$clashdir/mark
-source $ccfg
-#前后端订阅服务器地址索引，可在此处添加！
-Server=`sed -n ""$server_link"p"<<EOF
-subconverter-web.now.sh
-subconverter.herokuapp.com
-subcon.py6.pw
-api.dler.io
-api.wcc.best
-skapi.cool
-EOF`
-Config=`sed -n ""$rule_link"p"<<EOF
-https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online.ini
-https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_MultiMode.ini
-https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_AdblockPlus.ini
-https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_AdblockPlus.ini
-https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_NoReject.ini
-https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_NoAuto.ini
-https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_NoAuto.ini
-https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Full_Netflix.ini
-https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Full_AdblockPlus.ini
-EOF`
-#如果传来的是Url链接则合成Https链接，否则直接使用Https链接
-if [ -z $Https ];then
-	#echo $Url
-	Https="https://$Server/sub?target=clashr&insert=true&new_name=true&scv=true&exclude=$exclude&url=$Url&config=$Config"
-	markhttp=1
-fi
-#
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo 正在连接服务器获取配置文件…………链接地址为：
-echo -e "\033[4;32m$Https\033[0m"
-echo 可以手动复制该链接到浏览器打开并查看数据是否正常！
-echo -e "\033[36m~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
-echo -e "|                                             |"
-echo -e "|         需要一点时间，请耐心等待！          |"
-echo -e "|       \033[0m如长时间没有数据请用ctrl+c退出\033[36m        |"
-echo -e "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\033[0m"
-#获取在线yaml文件
-yaml=$clashdir/config.yaml
-yamlnew=/tmp/config.yaml
-rm -rf $yamlnew > /dev/null 2>&1
-result=$(curl -w %{http_code} -kLo $yamlnew $Https)
-if [ "$result" != "200" ];then
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[31m配置文件获取失败！\033[0m"
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo
-	if [ -z $markhttp ];then
-		echo 请尝试使用导入节点/链接功能！
-		getlink
-		
-	else
-		read -p "是否更换后端地址后重试？[1/0] > " res
-		if [ "$res" = '1' ]; then
-			sed -i '/server_link=*/'d $ccfg
-			if [[ $server_link -ge 6 ]]; then
-				server_link=0
-			fi
-			server_link=$(($server_link + 1))
-			echo $server_link
-			sed -i "1i\server_link=$server_link" $ccfg
-			Https=""
-			getyaml
-		fi
-		#exit;
-	fi
-else
-	Https=""
-	if cat $yamlnew | grep ', server:' >/dev/null;then
-		#检测旧格式
-		if cat $yamlnew | grep 'Proxy Group:' >/dev/null;then
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			echo -e "\033[31m已经停止对旧格式配置文件的支持！！！\033[0m"
-			echo -e "请使用新格式或者使用\033[32m导入节点/订阅\033[0m功能！"
-			sleep 2
-			clashlink
-		fi
-		#检测不支持的加密协议
-		if cat $yamlnew | grep 'cipher: chacha20,' >/dev/null;then
-			if [ "$clashcore" = "clash" -o "$clashcore" = "clashpre" ];then
-				echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-				echo -e "\033[31m当前核心：$clashcore不支持chacha20加密！！！\033[0m"
-				echo -e "请更换使用clashR核心！！！"
-				sleep 2
-				getcore
-			fi
-		fi
-		#替换文件
-		[ -f $yaml ] && mv $yaml $yaml.bak
-		mv $yamlnew $yaml
-		echo 配置文件已生成！正在启动clash使其生效！
-		#重启clash服务
-		killall -9 clash &> /dev/null
-		start_over(){
-			host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
-			echo -e "\033[32mclash服务已启动！\033[0m"
-			echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
-			echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m 9999 \033[0m"
-			echo -e "也可前往更新菜单安装本地Dashboard面板，连接更稳定！\033[0m"
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			clashsh
-		}
-		if [ "$start_old" = "已开启" ];then
-			source $clashdir/start.sh && start_old
-			sleep 1
-			status=`ps |grep -w 'clash'|grep -v grep|grep -v clash.sh|wc -l`
-			if [[ $status -gt 0 ]];then
-			start_over
-			fi
-		else
-			/etc/init.d/clash start
-			sleep 1
-			status=`ps |grep -w 'clash'|grep -v grep|grep -v clash.sh|wc -l`
-			if [[ $status -gt 0 ]];then
-				start_over
-			else
-				echo -e "\033[31mclash服务启动失败！尝试使用保守方式启动！\033[0m"
-				source $clashdir/start.sh && start_old
-				sleep 1
-				status=`ps |grep -w 'clash'|grep -v grep|grep -v clash.sh|wc -l`
-				if [[ $status -gt 0 ]];then
-					start_over
-				fi
-			fi
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			if [ -f $yaml.bak ];then
-				echo -e "\033[31mclash服务启动失败！已还原配置文件并重启clash！\033[0m"
-				mv $yaml.bak $yaml
-				/etc/init.d/clash start
-				sleep 1
-				clashsh
-			else
-				echo -e "\033[31mclash服务启动失败！请查看报错信息！\033[0m"
-				$clashdir/clash -d $clashdir & { sleep 3 ; kill $! & }
-				exit;
-			fi
-		fi
-	else
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		echo -e "\033[33m获取到了配置文件，但格式似乎不对！\033[0m"
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		sed -n '1,20p' $yamlnew
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		echo -e "\033[33m请检查如上配置文件信息:\033[0m"
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	fi
-	#exit;
-fi
-#exit
-}
 linkconfig(){
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
@@ -245,6 +93,8 @@ if [ -n $Url ];then
 	echo -e " 2 \033[36m添加/修改节点过滤关键字 \033[47;30m$exclude\033[0m"
 	echo -e " 3 \033[33m选取配置规则模版\033[0m"
 	echo -e " 4 \033[0m选取在线生成服务器\033[0m"
+	echo -e " 5 \033[0m跳过本地证书验证：	\033[36m$skip_cert\033[0m   ————解决节点证书验证错误"
+	echo -----------------------------------------------
 	echo -e " 0 \033[31m取消导入\033[0m并返回上级菜单"
 	echo -----------------------------------------------
 	read -p "请输入对应数字 > " num
@@ -259,7 +109,7 @@ if [ -n $Url ];then
 		sed -i "6i\Url=\'$Url\'" $ccfg
 		Https=""
 		#获取在线yaml文件
-		getyaml
+		$clashdir/start.sh getyaml
 	elif [ "$num" = '2' ]; then
 		linkfilter
 		linkset
@@ -269,6 +119,19 @@ if [ -n $Url ];then
 	elif [ "$num" = '4' ]; then
 		linkserver
 		linkset
+	elif [ "$num" = '5' ]; then
+		sed -i '/skip_cert*/'d $ccfg
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		if [ "$skip_cert" = "未开启" ] > /dev/null 2>&1; then 
+			sed -i "1i\skip_cert=已开启" $ccfg
+			#echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
+			skip_cert=已开启
+		else
+			sed -i "1i\skip_cert=未开启" $ccfg
+			#echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
+			skip_cert=未开启
+		fi
+		linkset
 	else
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[31m请输入正确的数字！\033[0m"
@@ -326,7 +189,8 @@ getlink2(){
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[30;47m 此功能不明勿用，出问题自行解决！\033[0m"
 echo -----------------------------------------------
-echo -e "\033[33m仅限导入完整clash链接！！！"
+echo -e "\033[33m仅限导入完整clash链接！！！\033[0m"
+echo -e "可以使用\033[32m https://acl4ssr.netlify.app \033[0m在线转换"
 echo -e "\033[36m导入后如无法运行，请使用【导入节点/订阅链接】功能"
 echo -e "\033[31m注意如节点使用了chacha20加密协议，需将核心更新为clashr核心\033[0m"
 echo -----------------------------------------------
@@ -348,7 +212,7 @@ if [ -n $Https ];then
 				sed -i '/Https=*/'d $ccfg
 				sed -i "6i\Https=\'$Https\'" $ccfg
 				#获取在线yaml文件
-				getyaml
+				$clashdir/start.sh getyaml
 			fi
 			clashlink
 	fi
@@ -360,14 +224,9 @@ else
 fi
 }
 getsh(){
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[33m正在检查更新！\033[0m"
-result=$(curl -w %{http_code} -skLo /tmp/clashversion $update_url/bin/version)
-[ "$result" != "200" ] && echo "检查更新失败！" && exit 1
-source /tmp/clashversion
 echo -----------------------------------------------
 echo -e "当前脚本版本为：\033[33m $versionsh_l \033[0m"
-echo -e "最新脚本版本为：\033[32m $versionsh \033[0m"
+echo -e "最新脚本版本为：\033[32m $release_new \033[0m"
 echo -----------------------------------------------
 read -p "是否更新脚本？[1/0] > " res
 if [ "$res" = '1' ]; then
@@ -375,7 +234,7 @@ if [ "$res" = '1' ]; then
 		echo 正在获取更新文件
 		result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $update_url/bin/clashfm.tar.gz)
 	else $result
-		wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $tarurl
+		wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $update_url/bin/clashfm.tar.gz
 		[ $? -eq 0 ] && result="200"
 	fi
 	[ "$result" != "200" ] && echo "文件下载失败！" && exit 1
@@ -385,12 +244,25 @@ if [ "$res" = '1' ]; then
 	mkdir -p $clashdir > /dev/null
 	tar -zxvf '/tmp/clashfm.tar.gz' -C $clashdir/ > /dev/null
 	[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
-	#初始化文件目录
-	mv $clashdir/clashservice /etc/init.d/clash #将clash服务文件移动到系统目录
-	chmod  777 /etc/init.d/clash #授予权限
-	#写入版本号
+	#判断系统类型写入不同的启动文件
+	if [ -n "$(cat /proc/version | grep -i openwrt)" ];then
+		mv $clashdir/clashservice /etc/init.d/clash #将rc服务文件移动到系统目录
+		chmod  777 /etc/init.d/clash #授予权限
+		rm -rf $clashdir/clash.service 
+	else
+		[ -d /etc/systemd/system ] && sysdir=/etc/systemd/system
+		[ -d /usr/lib/systemd/system/ ] && sysdir=/usr/lib/systemd/system/ 
+		mv $clashdir/clash.service $sysdir/clash.service #将service服务文件移动到系统目录
+		sed -i "s%/etc/clash%${clashdir}%g" $sysdir/clash.service
+		rm -rf $clashdir/clashservice
+		rm -rf /etc/init.d/clash
+	fi
+	#修饰文件及版本号
+	shtype=sh && [ -n "$(ls -l /bin/sh|grep -o dash)" ] && shtype=bash 
+	sed -i "s%#!/bin/sh%#!/bin/$shtype%g" $clashdir/start.sh
+	chmod  777 $clashdir/start.sh
 	sed -i '/versionsh_l=*/'d $ccfg
-	sed -i "1i\versionsh_l=$versionsh" $ccfg
+	sed -i "1i\versionsh_l=$release_new" $ccfg
 	#删除临时文件
 	rm -rf /tmp/clashfm.tar.gz 
 	rm -rf /tmp/clashversion
@@ -400,7 +272,7 @@ if [ "$res" = '1' ]; then
 	echo -----------------------------------------------
 	exit;
 else
-clashsh
+update
 fi
 }
 getcore(){
@@ -413,12 +285,14 @@ fi
 clashcore_n=$clashcore
 #获取设备处理器架构
 cpucore=$(uname -ms | tr ' ' '_' | tr '[A-Z]' '[a-z]')
-[ -n "$(echo $cpucore | grep -E "linux.*aarch64.*")" ] && cpucore="armv8"
-[ -n "$(echo $cpucore | grep -E "linux.*armv7.*")" ] && cpucore="armv7"
 [ -n "$(echo $cpucore | grep -E "linux.*armv.*")" ] && cpucore="armv5"
+[ -n "$(echo $cpucore | grep -E "linux.*aarch64.*")" ] && cpucore="armv8"
+[ -n "$(echo $cpucore | grep -E "linux.*armv8.*")" ] && cpucore="armv8"
+[ -n "$(echo $cpucore | grep -E "linux.*armv7.*")" ] && cpucore="armv7"
 [ -n "$(echo $cpucore | grep -E "linux.*mips.*")" ] && cpucore="mipsle-softfloat"
 [ -n "$(echo $cpucore | grep -E "linux.*x86.*")" ] && cpucore="386"
-[ -n "$(echo $cpucore | grep -E "linux.*amd64.*")" ] && cpucore="386"
+[ -n "$(echo $cpucore | grep -E "linux.*amd64.*")" ] && cpucore="amd64"
+[ -n "$(echo $cpucore | grep -E "linux.*x86_64.*")" ] && cpucore="amd64"
 ###
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "当前clash核心：\033[47;30m $clashcore \033[46;30m$clashv\033[0m"
@@ -503,12 +377,13 @@ fi
 getgeo(){
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[33m正在检查更新！\033[0m"
+echo $update_url
 result=$(curl -w %{http_code} -skLo /tmp/clashversion $update_url/bin/version)
 [ "$result" != "200" ] && echo "检查更新失败！" && exit 1
 source /tmp/clashversion
 echo -----------------------------------------------
-echo -e "当前脚本版本为：\033[33m $Geo_v \033[0m"
-echo -e "最新脚本版本为：\033[32m $GeoIP_v \033[0m"
+echo -e "当前GeoIP版本为：\033[33m $Geo_v \033[0m"
+echo -e "最新GeoIP版本为：\033[32m $GeoIP_v \033[0m"
 echo -----------------------------------------------
 read -p "是否更新数据库文件？[1/0] > " res
 if [ "$res" = '1' ]; then
@@ -534,7 +409,7 @@ clashsh
 fi
 }
 getdb(){
-host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
+#host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[36m安装本地版dashboard管理面板\033[0m"
 echo -----------------------------------------------
@@ -600,15 +475,46 @@ fi
 	
 update
 }
+catpac(){
+#检测目录
+[ ! -d /www/clash -a ! -d $clashdir/ui ]&&echo 未检测到本地Dashboard面板，请先安装面板！&&sleep 1&&getdb
+#host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
+[ -d /www/clash ]&&dir="/www/clash"&&pac=http://$host/clash/pac
+[ -d $clashdir/ui ]&&dir="$clashdir/ui"&&pac=http://$host:9999/ui/pac
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;47m生成用于设备WIFI或浏览器的自动PAC代理文件\033[0m"
+echo -e "\033[33m非纯净模式不推荐使用此功能\033[0m"
+[ -f $dir/pac ]&&echo -e "PAC地址：\033[32m$pac\033[0m"
+echo -----------------------------------------------
+echo -e " 1 生成PAC文件"
+echo -e " 2 清除PAC文件"
+echo -----------------------------------------------
+echo -e " 0 返回上级菜单"
+read -p "请输入对应数字 > " num
+	if [ "$num" = '1' ]; then
+		echo 'function FindProxyForURL(url, host) {' > $dir/pac
+		echo "    return \"SOCKS $host:7890; PROXY $host:7890; DIRECT;\"" >> $dir/pac
+		echo '}' >> $dir/pac
+		echo -e "\033[33mPAC文件已生成！\033[0m"
+		echo -e "PAC地址：\033[32m$pac\033[0m"
+		echo "使用教程：https://baike.baidu.com/item/PAC/16292100"
+		sleep 2
+	elif [[ $num == 2 ]]; then
+		rm -rf $dir/pac
+		echo -----------------------------------------------
+		echo -e "\033[33mPAC文件已清除！\033[0m"
+		sleep 1
+	fi
+}
 setserver(){
 
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[30;47m您可以在此处切换在线更新时使用的资源地址\033[0m"
 echo -e "当前源：\033[4;32m$update_url\033[0m"
 echo -----------------------------------------------
-echo -e " 1 CDN源(可能有一定的同步延迟)"
-echo -e " 2 Github源(不稳定，不推荐)"
-echo -e " 3 Github源+clash代理(需开启clash服务，推荐)"
+echo -e " 1 Github源(使用host指定IP)"
+echo -e " 2 CDN源(版本同步较慢)"
+echo -e " 3 Github源+clash代理(需开启clash服务)"
 echo -e " 4 自定义输入(请务必确保路径正确)"
 echo -e " 0 返回上级菜单"
 read -p "请输入对应数字 > " num
@@ -617,13 +523,11 @@ if	[ -z $num ]; then
 	echo -e "\033[31m请输入正确的数字！\033[0m"
 	update
 elif [[ $num == 1 ]]; then
-	update_url="https://cdn.jsdelivr.net/gh/juewuy/clash-for-Miwifi@latest"
-elif [[ $num == 9 ]]; then
-	update_url="https://juewuy.xyz/clash"
+	update_url='--resolve raw.githubusercontent.com:443:199.232.68.133 https://raw.githubusercontent.com/juewuy/ShellClash/master'
 elif [[ $num == 2 ]]; then
-	update_url="https://raw.githubusercontent.com/juewuy/clash-for-Miwifi/master"
+	update_url='https://cdn.jsdelivr.net/gh/juewuy/ShellClash' 
 elif [[ $num == 3 ]]; then
-	update_url="-x 127.0.0.1:7890 https://raw.githubusercontent.com/juewuy/clash-for-Miwifi/master"
+	update_url='-x 127.0.0.1:7890 https://raw.githubusercontent.com/juewuy/ShellClash/master'
 elif [[ $num == 4 ]]; then
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	read -p "请输入个人源路径 > " update_url
@@ -632,6 +536,8 @@ elif [[ $num == 4 ]]; then
 		echo -e "\033[31m取消输入，返回上级菜单\033[0m"
 		update
 	fi
+elif [[ $num == 9 ]]; then
+	update_url='http://127.0.0.1:8080/clash-for-Miwifi'
 else
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	echo -e "\033[31m请输入正确的数字！\033[0m"

scripts/start.sh

@@ -1,7 +1,9 @@
- #!/bin/sh
+#!/bin/sh
 # Copyright (C) Juewuy
 
 getconfig(){
+#加载环境变量
+[ -z "$clashdir" ] && source /etc/profile > /dev/null 2>&1
 ccfg=$clashdir/mark
 if [ ! -f "$ccfg" ]; then
 	echo mark文件不存在，默认以Redir模式运行！
@@ -20,6 +22,137 @@ for portx in 1053 7890 7892 9999 ;do
 	[ -n "$(netstat -ntulp |grep :$portx|grep -v clash)" ] && echo -e "检测到端口：\033[30;47m $portx \033[0m被以下进程占用！clash无法启动！" && echo $(netstat -ntulp |grep :$portx) && exit;
 done
 }
+getyaml(){
+#前后端订阅服务器地址索引，可在此处添加！
+Server=`sed -n ""$server_link"p"<<EOF
+subconverter-web.now.sh
+subconverter.herokuapp.com
+subcon.py6.pw
+api.dler.io
+api.wcc.best
+skapi.cool
+EOF`
+Config=`sed -n ""$rule_link"p"<<EOF
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_MultiMode.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_AdblockPlus.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_AdblockPlus.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_NoReject.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_NoAuto.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_NoAuto.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Full_Netflix.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Full_AdblockPlus.ini
+EOF`
+#如果传来的是Url链接则合成Https链接，否则直接使用Https链接
+if [ -z $Https ];then
+	#echo $Url
+	Https="https://$Server/sub?target=clashr&insert=true&new_name=true&scv=true&exclude=$exclude&url=$Url&config=$Config"
+	markhttp=1
+fi
+#
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 正在连接服务器获取配置文件…………链接地址为：
+echo -e "\033[4;32m$Https\033[0m"
+echo 可以手动复制该链接到浏览器打开并查看数据是否正常！
+echo -e "\033[36m~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
+echo -e "|                                             |"
+echo -e "|         需要一点时间，请耐心等待！          |"
+echo -e "|       \033[0m如长时间没有数据请用ctrl+c退出\033[36m        |"
+echo -e "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\033[0m"
+#获取在线yaml文件
+yaml=$clashdir/config.yaml
+yamlnew=/tmp/config.yaml
+rm -rf $yamlnew > /dev/null 2>&1
+result=$(curl -w %{http_code} -kLo $yamlnew $Https)
+if [ "$result" != "200" ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m配置文件获取失败！\033[0m"
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo
+	if [ -z $markhttp ];then
+		echo 请尝试使用导入节点/链接功能！
+		getlink
+		
+	else
+		read -p "是否更换后端地址后重试？[1/0] > " res
+		if [ "$res" = '1' ]; then
+			sed -i '/server_link=*/'d $ccfg
+			if [[ $server_link -ge 6 ]]; then
+				server_link=0
+			fi
+			server_link=$(($server_link + 1))
+			echo $server_link
+			sed -i "1i\server_link=$server_link" $ccfg
+			Https=""
+			getyaml
+		fi
+		#exit;
+	fi
+else
+	Https=""
+	if cat $yamlnew | grep ', server:' >/dev/null;then
+		#检测旧格式
+		if cat $yamlnew | grep 'Proxy Group:' >/dev/null;then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m已经停止对旧格式配置文件的支持！！！\033[0m"
+			echo -e "请使用新格式或者使用\033[32m导入节点/订阅\033[0m功能！"
+			sleep 2
+			clashlink
+		fi
+		#检测不支持的加密协议
+		if cat $yamlnew | grep 'cipher: chacha20,' >/dev/null;then
+			if [ "$clashcore" = "clash" -o "$clashcore" = "clashpre" ];then
+				echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+				echo -e "\033[31m当前核心：$clashcore不支持chacha20加密！！！\033[0m"
+				echo -e "请更换使用clashR核心！！！"
+				sleep 2
+				getcore
+			fi
+		fi
+		#替换文件
+		[ -f $yaml ] && mv $yaml $yaml.bak
+		mv $yamlnew $yaml
+		echo 配置文件已生成！正在启动clash使其生效！
+		#重启clash服务
+		$0 stop
+		start_over(){
+			echo -e "\033[32mclash服务已启动！\033[0m"
+			echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
+			echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m 9999 \033[0m"
+			echo -e "也可前往更新菜单安装本地Dashboard面板，连接更稳定！\033[0m"
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		}
+		$0 start
+		sleep 1
+		PID=$(pidof clash)
+		if [ -n "$PID" ];then
+			start_over
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			if [ -f $yaml.bak ];then
+				echo -e "\033[31mclash服务启动失败！已还原配置文件并重启clash！\033[0m"
+				mv $yaml.bak $yaml
+				$0 start
+				sleep 1
+			else
+				echo -e "\033[31mclash服务启动失败！请查看报错信息！\033[0m"
+				$clashdir/clash -d $clashdir & { sleep 3 ; kill $! & }
+				exit;
+			fi
+		fi
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m获取到了配置文件，但格式似乎不对！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		sed -n '1,30p' $yamlnew
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m请检查如上配置文件信息:\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	fi
+	#exit;
+fi
+#exit
+}
 modify_yaml(){
 ##########需要变更的配置###########
 mix='mixed-port: 7890'
@@ -77,11 +210,11 @@ exper='experimental: {ignore-resolve-fail: true, interface-name: en0}'
 }
 mark_time(){
 	start_time=`date +%s`
-	sed -i '/start_time*/'d $ccfg
-	sed -i "3i\start_time=$start_time" $ccfg
+	sed -i '/start_time*/'d $clashdir/mark
+	sed -i "1i\start_time=$start_time" $clashdir/mark
 }
 start_redir(){
-	#修改iptables规则使流量进入clash
+	#流量过滤规则
 	iptables -t nat -N clash
 	iptables -t nat -A clash -d 0.0.0.0/8 -j RETURN
 	iptables -t nat -A clash -d 10.0.0.0/8 -j RETURN
@@ -94,9 +227,10 @@ start_redir(){
 	for mac in $(cat $clashdir/mac); do
 		iptables -t nat -A clash -m mac --mac-source $mac -j RETURN
 	done
-	
+	#设置防火墙流量转发
 	iptables -t nat -A clash -p tcp $ports-j REDIRECT --to-ports 7892
 	iptables -t nat -A PREROUTING -p tcp -j clash
+	#设置ipv6转发
 	if [ "$ipv6_support" = "已开启" ];then
 		ip6tables -t nat -N clash
 		for mac in $(cat $clashdir/mac); do
@@ -125,7 +259,7 @@ stop_iptables(){
 start_dns(){
 	#允许tun网卡接受流量
 	iptables -I FORWARD -o utun -j ACCEPT
-	ip6tables -I FORWARD -o utun -j ACCEPT
+	ip6tables -I FORWARD -o utun -j ACCEPT > /dev/null 2>&1
 	#设置dns转发
 	iptables -t nat -N clash_dns
 	for mac in $(cat $clashdir/mac); do
@@ -133,77 +267,87 @@ start_dns(){
 	done
 	iptables -t nat -A clash_dns -p udp --dport 53 -j REDIRECT --to 1053
 	iptables -t nat -A PREROUTING -p udp -j clash_dns
+
 	#ipv6DNS
-	ip6tables -t nat -N clash_dns
-	for mac in $(cat $clashdir/mac); do
-		ip6tables -t nat -A clash_dns -m mac --mac-source $mac -j RETURN
-	done
-	ip6tables -t nat -A clash_dns -p udp --dport 53 -j REDIRECT --to 1053
-	ip6tables -t nat -A PREROUTING -p udp -j clash_dns
+	if [ "$ipv6_support" = "已开启" ];then
+		ip6tables -t nat -N clash_dns > /dev/null 2>&1
+		for mac in $(cat $clashdir/mac); do
+			ip6tables -t nat -A clash_dns -m mac --mac-source $mac -j RETURN > /dev/null 2>&1
+		done
+		ip6tables -t nat -A clash_dns -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
+		ip6tables -t nat -A PREROUTING -p udp -j clash_dns > /dev/null 2>&1
+	fi
 }
 daemon_old(){
 	#守护进程状态
-	status=$(ps |grep -w 'clash'|grep -v grep|grep -v clash.sh)
-	[ -z $status ] && $clashdir/clash -d $clashdir && mark_time
+	PID=$(pidof clash)
+	if [ -z "$PID" ];then
+	$clashdir/clash -d $clashdir > /dev/null &
+	mark_time
+	fi
 }
 checkcron(){
-if [ -d /etc/crontabs/ ]; then 
-	cronpath="/etc/crontabs/root"
-elif [ -d /var/spool/cron/ ]; then
-	cronpath="/var/spool/cron/root"
-elif [ -d /var/spool/cron/crontabs/ ]; then
-	cronpath="/var/spool/cron/crontabs/root"
-else
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo "找不到定时任务文件,无法添加定时任务！"
-fi
+	[ -d /etc/crontabs/ ]&&cronpath="/etc/crontabs/root"
+	[ -d /var/spool/cron/ ]&&cronpath="/var/spool/cron/root"
+	[ -d /var/spool/cron/crontabs/ ]&&cronpath="/var/spool/cron/crontabs/root"
+	if [ -z $cronpath ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo "找不到定时任务文件,无法添加定时任务！"
+		clashsh
+	fi
 }
-start_old(){
+afstart(){
 	#读取配置文件
 	getconfig
-	#使用内置规则强行覆盖config配置文件
-	[ "$modify_yaml" != "已开启" ] && modify_yaml
-    #创建clash后台进程
-	$clashdir/clash -d $clashdir> /dev/null &
 	#修改iptables规则使流量进入clash
 	stop_iptables
-	start_dns
-	[ "$redir_mod" != "Tun模式" ] && start_redir
+	[ "$redir_mod" != "纯净模式" ] && start_dns
+	[ "$redir_mod" != "纯净模式" ] && [ "$redir_mod" != "Tun模式" ] && start_redir
 	#标记启动时间
 	mark_time
-	#创建守护进程
-	checkcron
-	sed -i /start.sh/d $cronpath
-	echo "*/1 * * * * source /etc/profile && source $clashdir/start.sh && daemon_old >/dev/null 2>&1" >> $cronpath
-	#设定启动方式
-	sed -i /start_old=*/d $ccfg
-	sed -i "1i\start_old=已开启" $ccfg	
 }
-stop_old(){
-	#删除守护
-	checkcron
-	sed -i /start.sh/d $cronpath
-	#结束进程
-	killall -9 clash &> /dev/null
-	stop_iptables
-}
-start(){
-	getconfig
-	if [ "$start_old" ="已开启" ];then
-		start_old
-	else
-		/etc/init.d/clash start
-	fi
-}
-stop(){
-	getconfig
-	if [ "$start_old" ="已开启" ];then
-		stop_old
-	else
-		/etc/init.d/clash stop
-	fi
-}
-restart(){
-	stop
-	start
-}
+
+case "$1" in
+
+afstart)
+		afstart
+	;;
+start)		
+		#读取配置文件
+		getconfig
+		#使用内置规则强行覆盖config配置文件
+		[ "$modify_yaml" != "已开启" ] && modify_yaml
+		#使用不同方式启动clash服务
+		if [ "$start_old" = "已开启" ];then
+			$clashdir/clash -d $clashdir >/dev/null 2>&1 &
+			afstart
+		elif [ -f /etc/rc.common ];then
+			/etc/init.d/clash start
+		else
+			systemctl start clash.service
+		fi
+	;;
+stop)	
+		#删除守护
+		checkcron
+		sed -i /start.sh/d $cronpath >/dev/null 2>&1
+		#多种方式结束进程
+		if [ -f /etc/rc.common ];then
+			/etc/init.d/clash stop >/dev/null 2>&1
+		else
+			systemctl stop clash.service >/dev/null 2>&1
+		fi
+		killall -9 clash >/dev/null 2>&1
+		#清理iptables
+		stop_iptables
+        ;;
+restart)
+        $0 stop
+        $0 start
+        ;;
+getyaml)	
+		getconfig
+		getyaml
+		;;
+esac
+exit 0