v0.9.4

~调整安装初始化流程
~优化下载更新流程
~修复下载更新相关bug

README.md

@@ -4,7 +4,7 @@
 
 功能简介：
 --
-~支持小米AX系列路由器设备使用clash做透明代理，更多的设备支持可以前往TG群报名参与测试<br>
+~支持小米全系列路由器设备使用clash做透明代理，更多的设备支持可以前往TG群报名参与测试<br>
 ~支持SS、SSR、v2ray、trojan、sock5等协议<br>
 ~支持批量导入节点链接及订阅链接<br>
 ~支持使用网页面板管理规则组<br>
@@ -14,6 +14,18 @@
 
 更新日志：
 --
+* v0.9.2<br>
+~添加局域网设备过滤功能<br>
+~修复本地版本号不正常的bug<br>
+~修复规则偶尔显示为0的bug<br>
+* v0.9.1<br>
+~新增更多设备支持，理论上支持小米全系路由器设备（待测试）<br>
+~增加了对设备核心架构的自动检测，适配armv5，armv7，armv8（aarch64），mipsle及x86平台<br>
+~增加了一部分acl规则模版<br>
+~修复了几处偶尔报错的小bug<br>
+* v0.9.0<br>
+~新增定时任务功能（实验性，欢迎测试）<br>
+~修复测试命令时一个报错的小bug<br>
 * v0.8.7<br>
 ~修复了脚本更新路径不正确的bug<br>
 ~调整了geoip数据库下载源地址<br>
@@ -61,7 +73,9 @@ ToDo：
 ~~增加屏蔽P2P流量功能~~<br>
 ~~增加更新功能~~<br>
 ~~修复redir-host DNS以及IPV6支持~~<br>
-~增加定时功能<br>
+~~增加定时功能~~<br>
+~~增加屏蔽局域网设备~~<br>
+~~增加更多设备支持~~<br>
 
 感谢：
 --

bin/clashpre/version

@@ -1 +1 @@
-version=1.0.0
+version=20200813

bin/version

@@ -1 +1 @@
-versionsh=0.8.7
+versionsh=0.9.4

install.sh

@@ -59,14 +59,13 @@ fi
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo 开始解压文件！
 mkdir -p $dir/clash > /dev/null
-tar -zxvf '/tmp/clashfm.tar.gz' -C $dir/clash/ > /dev/null
+tar -zxvf '/tmp/clashfm.tar.gz' -C $dir/clash/
 [ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
 #初始化文件目录
 mv $dir/clash/clashservice /etc/init.d/clash #将clash服务文件移动到系统目录
-chmod  777 $dir/clash/clash  #授予权限
 chmod  777 /etc/init.d/clash #授予权限
 if [ ! -f "$dir/clash/mark" ]; then
-cat >$ccfg<<EOF
+cat >$dir/clash/mark<<EOF
 #标识clash运行状态的文件，不明勿动！
 EOF
 fi

install_c.sh

@@ -1,87 +0,0 @@
- #!/bin/sh
-# Copyright (C) Juewuy
-
-echo "***********************************************"
-echo "**                 欢迎使用                  **"
-echo "**             Clash for Miwifi              **"
-echo "**                             by  Juewuy    **"
-echo "***********************************************"
-
-url="https://juewuy.xyz/clash/"
-result=$(curl -w %{http_code} -skLo /tmp/clashversion $url/bin/version)
-[ "$result" != "200" ] && echo "无法连接到服务器！" && exit 1
-source /tmp/clashversion
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "~~~~版本：\033[32m$versionsh\033[0m"
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[44m使用中如遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
-echo -e "\033[37m目前仅支持小米AX系列3款路由器"
-echo -e "\033[44m其余型号可到TG群报名参与测试\033[0m"
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[32m 1 在默认目录(/etc)安装Clash for Miwifi"
-echo -e "\033[33m 2 手动设置安装目录（不明勿用！）"
-echo -e "\033[0m 0 退出安装"
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-read -p "请输入相应数字 > " num
-
-if [ -z $num ];then
-	echo 安装已取消
-	exit;
-elif [[ $num == 1 ]];then
-	dir=/etc
-elif [[ $num == 2 ]];then
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo '可用路径 剩余空间:'
-	df -h | awk '{print $6,$2}'| sed 1d 
-	echo '路径是必须带 / 的格式，写入虚拟内存(/tmp,/sys,..)的文件会在重启后消失！！！'
-	read -p "请输入自定义路径 > " dir
-	if [ -z $dir ];then
-		echo 路径错误！已取消安装！
-		exit;
-	fi
-else
-	echo 安装已取消
-	exit;
-fi
-#下载文件包
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo 开始从服务器获取安装文件！
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-tarurl=$url/bin/clashfm.tar.gz
-if command -v curl &> /dev/null; then
-	result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $tarurl)
-else $result
-	wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $tarurl
-	[ $? -eq 0 ] && result="200"
-fi
-[ "$result" != "200" ] && echo "文件下载失败！" && exit 1
-#解压
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo 开始解压文件！
-mkdir -p $dir/clash > /dev/null
-tar -zxvf '/tmp/clashfm.tar.gz' -C $dir/clash/ > /dev/null
-[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
-#初始化文件目录
-mv $dir/clash/clashservice /etc/init.d/clash #将clash服务文件移动到系统目录
-chmod  777 $dir/clash/clash  #授予权限
-chmod  777 /etc/init.d/clash #授予权限
-if [ ! -f "$dir/clash/mark" ]; then
-cat >$ccfg<<EOF
-#标识clash运行状态的文件，不明勿动！
-EOF
-fi
-sed -i '/versionsh_l=*/'d $dir/clash/mark
-sed -i "1i\versionsh_l=$versionsh" $dir/clash/mark
-#设置环境变量
-sed -i '/alias clash=*/'d /etc/profile
-echo "alias clash=\"sh $dir/clash/clash.sh\"" >> /etc/profile #设置快捷命令环境变量
-sed -i '/export clashdir=*/'d /etc/profile
-echo "export clashdir=\"$dir/clash\"" >> /etc/profile #设置clash路径环境变量
-#删除临时文件
-rm -rf /tmp/clashfm.tar.gz 
-#提示
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo clash for Miwifi 已经安装成功!
-echo -e "\033[33m直接输入\033[30;47m clash \033[0;33m命令即可管理！！！\033[0m"
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-

scripts/clash.sh

@@ -2,14 +2,12 @@
 # Copyright (C) Juewuy
 
 getconfig(){
-#版本号
-versionsh_l=0.8.7
 #服务器地址
-if [ -z $update_url ]; then
-	update_url=https://cdn.jsdelivr.net/gh/juewuy/clash-for-Miwifi/
+if [ -z "$update_url" ]; then
+	update_url=https://cdn.jsdelivr.net/gh/juewuy/clash-for-Miwifi@latest
 fi
 #文件路径
-if [ -z $clashdir ];then
+if [ -z "$clashdir" ];then
 clashdir=$(dirname $(readlink -f "$0"))
 echo "export clashdir=\"$clashdir\"" >> /etc/profile
 fi
@@ -23,6 +21,8 @@ if [ ! -f "$ccfg" ]; then
 EOF
 fi
 source $ccfg
+#检查mac地址记录
+[ ! -f "$clashdir/mac" ] && touch $clashdir/mac
 #获取自启状态
 if [ -f /etc/rc.d/*clash ]; then 
 	auto="\033[32m已设置开机启动！\033[0m"
@@ -32,7 +32,7 @@ else
 	auto1="\033[36m允许\033[0mclash开机启动"
 fi
 #获取运行模式
-if [ ! -n "$redir_mod" ]; then
+if [ -z "$redir_mod" ]; then
 	sed -i "2i\redir_mod=Redir模式" $ccfg
 	redir_mod=Redir模式
 fi
@@ -79,34 +79,46 @@ if [ ! -f $clashdir/Country.mmdb ];then
 	echo -e "\033[31m没有找到GeoIP数据库文件，请先下载数据库！\033[0m"
 	source $clashdir/getdate.sh
 	getgeo
+	clashstart
 fi
 }
 clashstart(){
-
-/etc/init.d/clash start
-sleep 1
-status=`ps |grep -w 'clash -d'|grep -v grep|wc -l`
+	if [ ! -f "$yaml" ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m没有找到配置文件，请先导入节点/订阅链接！\033[0m"
+		clashlink
+	fi
+	if [ $status -gt 0 ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		/etc/init.d/clash stop > /dev/null 2>&1
+		echo -e "\033[31mClash服务已停止！\033[0m"
+	fi
+		/etc/init.d/clash start
+		sleep 1
+		status=`ps |grep -w 'clash -d'|grep -v grep|wc -l`
 	if [[ $status -gt 0 ]];then
 		host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[32mclash服务已启动！\033[0m"
 		echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
-		echo -e "也可以前往更新菜单安装本地Dashboard面板，连接更稳定！！！"
 		echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m 9999 \033[0m"
+		echo -e "也可前往更新菜单安装本地Dashboard面板，连接更稳定！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	else
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[31mclash服务启动失败！请检查配置文件！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	fi
 }
 clashlink(){
 #获取订阅规则
-if [ ! -n "$rule_link" ]; then
+if [ -z "$rule_link" ]; then
 	sed -i '/rule_link=*/'d $ccfg
 	sed -i "4i\rule_link=1" $ccfg
 	rule_link=1
 fi
 #获取后端服务器地址
-if [ ! -n "$server_link" ]; then
+if [ -z "$server_link" ]; then
 	sed -i '/server_link=*/'d $ccfg
 	sed -i "5i\server_link=1" $ccfg
 	server_link=1
@@ -120,10 +132,9 @@ echo -e " 3 选取\033[33m代理规则\033[0m模版"
 echo -e " 4 选择配置生成服务器"
 echo -e " 5 \033[36m还原\033[0m配置文件"
 echo -e " 6 \033[32m手动更新\033[0m订阅"
-echo -e " 7 设置自动更新（未完成）"
 echo -e " 0 返回上级菜单"
 read -p "请输入对应数字 > " num
-if [ -z $num ];then
+if [ -z "$num" ];then
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	echo -e "\033[31m请输入正确的数字！\033[0m"
 	clashsh
@@ -167,21 +178,26 @@ elif [[ $num == 3 ]];then
 	echo 3 ACL4SSR通用版去广告加强
 	echo 4 ACL4SSR精简版去广告加强
 	echo 5 ACL4SSR通用版无去广告
+	echo 6 ACL4SSR通用版无自动测速
+	echo 7 ACL4SSR精简版无自动测速
+	echo 8 ACL4SSR超重度奈飞全量
 	echo 0 返回上级菜单
 	read -p "请输入对应数字 > " num
-		if [ -z $num ];then
+	if [ -z "$num" ];then
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[31m请输入正确的数字！\033[0m"
 		clashlink
-		else
-			#将对应标记值写入mark
-			sed -i '/rule_link*/'d $ccfg
-			sed -i "4i\rule_link="$num"" $ccfg	
-			rule_link=$num
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
-			echo -e "\033[32m设置成功！返回上级菜单！\033[0m"
-			clashlink
-		fi
+	elif [[ "$num" == 0 ]];then
+		clashlink
+	else
+		#将对应标记值写入mark
+		sed -i '/rule_link*/'d $ccfg
+		sed -i "4i\rule_link="$num"" $ccfg	
+		rule_link=$num
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
+		echo -e "\033[32m设置成功！返回上级菜单！\033[0m"
+		clashlink
+	fi
 elif [[ $num == 4 ]];then
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
@@ -195,14 +211,13 @@ elif [[ $num == 4 ]];then
 	echo 7 subconvert.dreamcloud.pw
 	echo 0 返回上级菜单
 	read -p "请输入对应数字 > " num
-    if [ -z $num ];then
+    if [ -z "$num" ];then
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[31m请输入正确的数字！\033[0m"
 		clashlink
-	else
-		if [[ $num == 0 ]];then
+	elif [[ "$num" == 0 ]];then
 		clashlink
-		fi
+	else
 		#将对应标记值写入mark
 		sed -i '/server_link*/'d $ccfg
 		sed -i "4i\server_link="$num"" $ccfg	
@@ -231,7 +246,7 @@ elif [[ $num == 5 ]];then
 	fi
 	clashsh
 elif [[ $num == 6 ]];then
-	if [ ! -n "$Url" ];then
+	if [ -z "$Url" ];then
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo 没有找到你的订阅链接！请先输入链接！
 		clashlink
@@ -258,21 +273,26 @@ fi
 }
 clashadv(){
 #获取设置默认显示
-if [ ! -n "$skip_cert" ]; then
+if [ -z "$skip_cert" ]; then
 	skip_cert=已开启
 fi
-if [ ! -n "$common_ports" ]; then
+if [ -z "$common_ports" ]; then
 	common_ports=未开启
 fi
-if [ ! -n "$dns_mod" ]; then
+if [ -z "$dns_mod" ]; then
 	dns_mod=redir_host
 fi
-if [ ! -n "$modify_yaml" ]; then
+if [ -z "$modify_yaml" ]; then
 	modify_yaml=未开启
 fi
-if [ ! -n "$ipv6_support" ]; then
+if [ -z "$ipv6_support" ]; then
 	ipv6_support=未开启
 fi
+if [ -z "$(cat $clashdir/mac)" ]; then
+	mac_return=未开启
+else
+	mac_return=已启用
+fi
 #
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[30;47m欢迎使用高级模式菜单：\033[0m"
@@ -284,6 +304,7 @@ echo -e " 3 跳过本地证书验证：	\033[36m$skip_cert\033[0m   ————
 echo -e " 4 只代理常用端口： 	\033[36m$common_ports\033[0m   ————用于屏蔽P2P流量"
 echo -e " 5 不修饰config.yaml:	\033[36m$modify_yaml\033[0m   ————用于使用自定义配置"
 echo -e " 6 启用ipv6支持:     	\033[36m$ipv6_support\033[0m   ————实验性且不兼容Fake_ip"
+echo -e " 7 过滤局域网mac地址：	\033[36m$mac_return\033[0m   ————列表内设备不走代理"
 echo -e " 9 \033[32m重启\033[0mclash服务"
 echo -e " 0 返回上级菜单 \033[0m"
 read -p "请输入对应数字 > " num
@@ -307,7 +328,7 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		echo "              不推荐使用redir-host"
 		echo " 0 返回上级菜单"
 		read -p "请输入对应数字 > " num	
-		if [ -z $num ]; then
+		if [ -z "$num" ]; then
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			echo -e "\033[31m请输入正确的数字！\033[0m"
 			clashadv
@@ -354,7 +375,7 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		echo "                   不支持Tun模式"
 		echo " 0 返回上级菜单"
 		read -p "请输入对应数字 > " num
-		if [ -z $num ]; then
+		if [ -z "$num" ]; then
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			echo -e "\033[31m请输入正确的数字！\033[0m"
 			clashadv
@@ -440,7 +461,74 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 			ipv6_support=未开启
 		fi
 		clashadv  
+
+	elif [[ $num == 7 ]]; then	
 	
+		add_mac(){
+			echo -----------------------------------------------
+			echo -e "\033[33m序号   设备IP       设备mac地址       设备名称\033[32m"
+			cat /tmp/dhcp.leases | awk '{print " "NR" "$3,$2,$4}'
+			echo -e "\033[0m 0 或回车 结束添加"
+			read -p "请输入对应序号 > " num
+			if [ -z "$num" ]; then
+				clashadv
+			elif [ $num -le 0 ]; then
+				clashadv
+			elif [ $num -le $(cat /tmp/dhcp.leases | awk 'END{print NR}') ]; then
+				macadd=$(cat /tmp/dhcp.leases | awk '{print $2}' | sed -n "$num"p)
+				if [ -z $(cat $clashdir/mac | grep -E "$macadd") ];then
+					echo $macadd >> $clashdir/mac
+					echo -----------------------------------------------
+					echo 已添加的mac地址：
+					cat $clashdir/mac
+				else
+					echo -----------------------------------------------
+					echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
+				fi
+			else
+				echo -----------------------------------------------
+				echo -e "\033[31m输入有误，请重新输入！\033[0m"
+			fi
+			add_mac
+		}
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m请在此添加或移除设备\033[0m"
+		if [ -n "$(cat $clashdir/mac)" ]; then
+			echo -e "当前已过滤设备为：\033[36m"
+			for mac in $(cat $clashdir/mac); do
+				cat /tmp/dhcp.leases | awk '{print $3,$2,$4}' | grep $mac
+			done
+			echo -e "\033[0m-----------------------------------------------"
+		fi
+		echo -e " 1 \033[31m清空列表\033[0m"
+		echo -e " 2 \033[32m添加设备\033[0m"
+		echo -e " 0 返回上级菜单"
+		read -p "请输入对应数字 > " num
+		if [ -z "$num" ]; then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			clashadv
+		elif [[ $num == 0 ]]; then
+			clashadv
+		elif [[ $num == 1 ]]; then
+			:>$clashdir/mac
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m设备列表已清空！\033[0m"
+			sleep 1
+			clashadv
+		elif [[ $num == 2 ]]; then	
+			add_mac
+			
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			clashadv
+		fi
+		
+
+
+		clashadv 
+		
 	elif [[ $num == 9 ]]; then	
 		if [ $status -gt 0 ];then
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -490,6 +578,7 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 	elif [[ $num == 3 ]]; then	
 		source $clashdir/getdate.sh
 		getgeo
+		update
 	
 	elif [[ $num == 4 ]]; then	
 		source $clashdir/getdate.sh
@@ -525,6 +614,135 @@ else
 fi
 exit;
 }
+clashcron(){
+
+	setcron(){
+	echo -----------------------------------------------
+	echo -e " 正在设置：\033[32m$cronname\033[0m定时任务"
+	echo -e " 输入  1-7  对应\033[33m每周相应天\033[0m运行"
+	echo -e " 输入   8   设为\033[33m每天定时\033[0m运行"
+	echo -e " 输入 1,3,6 代表\033[36m每周1,3,6\033[0m运行(注意用小写逗号分隔)"
+	echo -e " 输入   9   \033[31m删除定时任务\033[0m"
+	echo -e " 输入   0   返回上级菜单"
+	read -p "请输入对应数字 > " num
+	if [ -z "$num" ]; then 
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		clashcron
+	elif [[ $num == 0 ]]; then
+		clashcron
+	elif [[ $num == 9 ]]; then
+		sed -i /$cronname/d $cronpath
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m定时任务：$cronname已删除！\033[0m"
+		clashcron
+	elif [[ $num == 8 ]]; then	
+		week='*'
+		week1=每天
+		echo 已设为每天定时运行！
+	else
+		week=$num	
+		week1=每周$week
+		echo 已设为每周 $num 运行！
+	fi
+	#设置具体时间
+	echo -----------------------------------------------
+	read -p "请输入小时（0-23） > " num
+	if [ -z "$num" ]; then 
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		setcron
+	elif [ $num -gt 23 ] || [ $num -lt 0 ]; then 
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		setcron
+	else	
+		hour=$num
+	fi
+	echo -----------------------------------------------
+	read -p "请输入分钟（0-60） > " num
+	if [ -z "$num" ]; then 
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		setcron
+	elif [ $num -gt 60 ] || [ $num -lt 0 ]; then 
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		setcron
+	else	
+		min=$num
+	fi
+	echo -----------------------------------------------
+	echo 将在$week1的$hour点$min分$cronname（旧的任务会被覆盖）
+	read -p  "是否确认添加定时任务？(1/0) > " res
+		if [ "$res" = '1' ]; then
+			sed -i /$cronname/d $cronpath
+			echo "$min $hour * * $week $cronset >/dev/null 2>&1 #$week1的$hour点$min分$cronname" >> $cronpath
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m定时任务已添加！！！\033[0m"
+		fi
+		clashcron
+	}
+	checkcron(){
+	if [ -d /etc/crontabs/ ]; then 
+		cronpath="/etc/crontabs/root"
+	elif [ -d /var/spool/cron/ ]; then
+		cronpath="/var/spool/cron/root"
+	elif [ -d /var/spool/cron/crontabs/ ]; then
+		cronpath="/var/spool/cron/crontabs/root"
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo "找不到定时任务文件,无法添加定时任务！"
+		clashsh
+	fi
+
+	}
+#定时任务菜单
+checkcron #检测定时任务文件
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;47m欢迎使用定时任务功能：\033[0m"
+echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo -----------------------------------------------
+echo  -e "\033[33m当前已经添加的定时任务有：\033[36m"
+crontab -l | egrep -o '#.*' 
+echo -e "\033[0m"-----------------------------------------------
+echo -e " 1 设置\033[33m定时重启\033[0mclash服务"
+echo -e " 2 设置\033[31m定时停止\033[0mclash服务"
+echo -e " 3 设置\033[32m定时开启\033[0mclash服务"
+echo -e " 4 设置\033[33m定时更新\033[0m订阅链接(实验性，可能不稳定)"
+echo -e " 0 返回上级菜单" 
+read -p "请输入对应数字 > " num
+if [ -z "$num" ]; then 
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	clashsh
+	
+elif [[ $num == 0 ]]; then
+	clashsh
+	
+elif [[ $num == 1 ]]; then	
+	cronname=重启clash服务
+	cronset='/etc/init.d/clash restart'
+	setcron
+elif [[ $num == 2 ]]; then	
+	cronname=停止clash服务
+	cronset='/etc/init.d/clash stop'
+	setcron
+elif [[ $num == 3 ]]; then	
+	cronname=开启clash服务
+	cronset='/etc/init.d/clash start'
+	setcron
+elif [[ $num == 4 ]]; then	
+	cronname=更新订阅链接
+	cronset="source /etc/profile && source $clashdir/getdate.sh && getyaml"
+	setcron	
+	
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	clashsh
+fi
+}
 clashsh(){
 #############################
 getconfig
@@ -533,7 +751,7 @@ echo -e " 1 \033[32m启动/重启\033[0mclash服务"
 echo -e " 2 clash\033[33m高级设置\033[0m"
 echo -e " 3 \033[31m停止\033[0mclash服务"
 echo -e " 4 $auto1"
-echo -e " 5 设置定时任务（施工中）"
+echo -e " 5 设置定时任务"
 echo -e " 6 导入\033[32m节点/订阅\033[0m链接"
 echo -e " 8 \033[35m测试菜单\033[0m"
 echo -e " 9 \033[36m更新/卸载\033[0m"
@@ -544,18 +762,9 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		exit;
   
 	elif [[ $num == 1 ]]; then
-		if [ ! -f "$yaml" ];then
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			echo -e "\033[31m没有找到配置文件，请先导入节点/订阅链接！\033[0m"
-			clashlink
-		fi
-		if [ $status -gt 0 ];then
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			/etc/init.d/clash stop > /dev/null 2>&1
-			echo -e "\033[31mClash服务已停止！\033[0m"
-		fi
+
 		clashstart
-		clashsh
+		exit;
   
 	elif [[ $num == 2 ]]; then
 		clashadv
@@ -579,14 +788,7 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		clashsh
 
 	elif [[ $num == 5 ]]; then
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		echo -e "\033[31m正在施工中，敬请期待！\033[0m"
-		echo -e "\033[32m正在施工中，敬请期待！\033[0m"
-		echo -e "\033[33m正在施工中，敬请期待！\033[0m"
-		echo -e "\033[34m正在施工中，敬请期待！\033[0m"
-		echo -e "\033[35m正在施工中，敬请期待！\033[0m"
-		echo -e "\033[36m正在施工中，敬请期待！\033[0m"
-		clashsh
+		clashcron
     
 	elif [[ $num == 6 ]]; then
 		clashlink
@@ -604,14 +806,14 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		echo " 6 测试代理服务器连通性（google.tw)"
 		echo " 0 返回上级目录！"
 		read -p "请输入对应数字 > " num
-		if [ -z $num ]; then
+		if [ -z "$num" ]; then
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			echo -e "\033[31m请输入正确的数字！\033[0m"
 			clashsh
 		elif [[ $num == 0 ]]; then
 			clashsh
 		elif [[ $num == 1 ]]; then
-			etc/init.d/clash stop
+			/etc/init.d/clash stop
 			echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
 			$clashdir/clash -d $clashdir & { sleep 3 ; kill $! & }
 			echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
@@ -630,6 +832,9 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			iptables  -t nat  -L PREROUTING --line-numbers
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			iptables  -t nat  -L clash --line-numbers
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			iptables  -t nat  -L clash_dns --line-numbers
 			exit;
 		elif [[ $num == 5 ]]; then
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

scripts/clashservice

@@ -94,31 +94,55 @@ start_redir(){
 	iptables -t nat -A clash -d 192.168.0.0/16 -j RETURN
 	iptables -t nat -A clash -d 224.0.0.0/4 -j RETURN
 	iptables -t nat -A clash -d 240.0.0.0/4 -j RETURN
+	for mac in $(cat $clashdir/mac); do
+		iptables -t nat -A clash -m mac --mac-source $mac -j RETURN
+	done
+	
 	iptables -t nat -A clash -p tcp $ports-j REDIRECT --to-ports 7892
 	iptables -t nat -A PREROUTING -p tcp -j clash
 	if [ "$ipv6_support" = "已开启" ];then
-		ip6tables -t nat -N clashv6
-		ip6tables -t nat -A clashv6 -p tcp $ports-j REDIRECT --to-ports 7892
-		ip6tables -t nat -A PREROUTING -p tcp -j clashv6
+		ip6tables -t nat -N clash
+		for mac in $(cat $clashdir/mac); do
+			ip6tables -t nat -A clash -m mac --mac-source $mac -j RETURN
+		done
+		ip6tables -t nat -A clash -p tcp $ports-j REDIRECT --to-ports 7892
+		ip6tables -t nat -A PREROUTING -p tcp -j clash
 	fi
 }
 stop_iptables(){
     #重置iptables规则
 	iptables -t nat -D PREROUTING -p tcp -j clash > /dev/null 2>&1
+	iptables -t nat -D PREROUTING -p udp -j clash_dns > /dev/null 2>&1
 	iptables -t nat -F clash > /dev/null 2>&1
 	iptables -t nat -X clash > /dev/null 2>&1
-	iptables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
-	ip6tables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
-	ip6tables -t nat -D PREROUTING -p tcp -j clashv6 > /dev/null 2>&1
-	ip6tables -t nat -F clashv6 > /dev/null 2>&1
-	ip6tables -t nat -X clashv6 > /dev/null 2>&1
+	iptables -t nat -F clash_dns > /dev/null 2>&1
+	iptables -t nat -X clash_dns > /dev/null 2>&1
+	#重置ipv6规则
+	ip6tables -t nat -D PREROUTING -p tcp -j clash > /dev/null 2>&1
+	ip6tables -t nat -D PREROUTING -p udp -j clash_dns > /dev/null 2>&1
+	ip6tables -t nat -F clash > /dev/null 2>&1
+	ip6tables -t nat -X clash > /dev/null 2>&1
+	ip6tables -t nat -F clash_dns > /dev/null 2>&1
+	ip6tables -t nat -X clash_dns > /dev/null 2>&1
 }
 start_dns(){
 	#允许tun网卡接受流量
 	iptables -I FORWARD -o utun -j ACCEPT
+	ip6tables -I FORWARD -o utun -j ACCEPT
 	#设置dns转发
-	iptables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to 1053
-	ip6tables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to 1053
+	iptables -t nat -N clash_dns
+	for mac in $(cat $clashdir/mac); do
+		iptables -t nat -A clash_dns -m mac --mac-source $mac -j RETURN
+	done
+	iptables -t nat -A clash_dns -p udp --dport 53 -j REDIRECT --to 1053
+	iptables -t nat -A PREROUTING -p udp -j clash_dns
+	#ipv6DNS
+	ip6tables -t nat -N clash_dns
+	for mac in $(cat $clashdir/mac); do
+		ip6tables -t nat -A clash_dns -m mac --mac-source $mac -j RETURN
+	done
+	ip6tables -t nat -A clash_dns -p udp --dport 53 -j REDIRECT --to 1053
+	ip6tables -t nat -A PREROUTING -p udp -j clash_dns
 }
 start_service() {
 	getconfig

scripts/getdate.sh

@@ -2,6 +2,7 @@
 # Copyright (C) Juewuy
 
 getyaml(){
+ccfg=$clashdir/mark
 source $ccfg
 #前后端订阅服务器地址索引，可在此处添加！
 Server=`sed -n ""$server_link"p"<<EOF
@@ -19,9 +20,13 @@ https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_On
 https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_AdblockPlus.ini
 https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_AdblockPlus.ini
 https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_NoReject.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_NoAuto.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_NoAuto.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Full_Netflix.ini
 EOF`
 #如果传来的是Url链接则合成Https链接，否则直接使用Https链接
 if [ -z $Https ];then
+	echo $Url
 	Https="https://$Server/sub?target=clashr&new_name=true&url=$Url&insert=false&config=$Config"
 	markhttp=1
 fi
@@ -36,6 +41,7 @@ echo -e "|         需要一点时间，请耐心等待！          |"
 echo -e "|       \033[0m如长时间没有数据请用ctrl+c退出\033[36m        |"
 echo -e "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\033[0m"
 #获取在线yaml文件
+yaml=$clashdir/config.yaml
 yamlnew=$yaml.new
 rm -rf $yamlnew > /dev/null 2>&1
 result=$(curl -w %{http_code} -kLo $yamlnew $Https)
@@ -50,15 +56,16 @@ if [ "$result" != "200" ];then
 		read -p "是否更换后端地址后重试？[1/0] > " res
 		if [ "$res" = '1' ]; then
 			sed -i '/server_link=*/'d $ccfg
-			if [ "$server_link" = '7' ]; then
+			if [[ $server_link == 7 ]]; then
 				server_link=0
 			fi
 			server_link=$(($server_link + 1))
-			#echo $server_link
+			echo $server_link
 			sed -i "1i\server_link=$server_link" $ccfg
+			Https=""
 			getyaml
 		fi
-		exit;
+		#exit;
 	fi
 else
 	if cat $yamlnew | grep ', server:' >/dev/null;then
@@ -67,20 +74,20 @@ else
 			mv $yaml $yaml.bak
 		fi
 		mv $yamlnew $yaml
-		echo 配置文件已生成！正在重启clash使其生效！
+		echo 配置文件已生成！正在启动clash使其生效！
 		#重启clash服务
-		/etc/init.d/clash restart
+		/etc/init.d/clash stop > /dev/null 2>&1
+		/etc/init.d/clash start
 		sleep 1
 		status=`ps |grep -w 'clash -d'|grep -v grep|wc -l`
 		if [[ $status -gt 0 ]];then
+			host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			echo -e "\033[32mclash服务已启动！\033[0m"
-			echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理clash内置规则"
-			host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
-			echo -e "Host地址:\033[30;46m $host \033[0m;端口:\033[30;46m 9999 \033[0m"
-			#将用户链接写入mark
-			sed -i '/Https=*/'d $ccfg
-			sed -i "7i\Https=\'$Https\'" $ccfg
+			echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
+			echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m 9999 \033[0m"
+			echo -e "也可前往更新菜单安装本地Dashboard面板，连接更稳定！\033[0m"
+			sleep 1
 			clashsh
 		else
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -88,9 +95,11 @@ else
 				echo -e "\033[31mclash服务启动失败！已还原配置文件并重启clash！\033[0m"
 				mv $yaml.bak $yaml
 				/etc/init.d/clash start
+				sleep 1
 				clashsh
 			else
 				echo -e "\033[31mclash服务启动失败！请利用测试菜单排查问题！\033[0m"
+				sleep 1
 				clashsh
 			fi
 		fi
@@ -103,9 +112,9 @@ else
 		echo -e "\033[33m请检查如上配置文件信息:\033[0m"
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 	fi
-	exit;
+	#exit;
 fi
-exit
+#exit
 }
 getlink(){
 #设置输入循环
@@ -148,6 +157,7 @@ do
 				sed -i '/Url=*/'d $ccfg
 				sed -i '/Https=*/'d $ccfg
 				sed -i "6i\Url=\'$Url\'" $ccfg
+				Https=""
 				#获取在线yaml文件
 				getyaml
 			fi
@@ -245,9 +255,10 @@ if [ "$res" = '1' ]; then
 	[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
 	#初始化文件目录
 	mv $clashdir/clashservice /etc/init.d/clash #将clash服务文件移动到系统目录
-	chmod  777 $clashdir/clash  #授予权限
 	chmod  777 /etc/init.d/clash #授予权限
-
+	#写入版本号
+	sed -i '/versionsh_l=*/'d $ccfg
+	sed -i "1i\versionsh_l=$versionsh" $ccfg
 	#删除临时文件
 	rm -rf /tmp/clashfm.tar.gz 
 	rm -rf /tmp/clashversion
@@ -267,9 +278,15 @@ if [ ! -f $clashdir/clash ]; then
 	clashcore=没有安装核心！
 	clashv=''
 fi
-
-cpucore=armv7
 clashcore_n=$clashcore
+#获取设备处理器架构
+cpucore=$(uname -ms | tr ' ' '_' | tr '[A-Z]' '[a-z]')
+[ -n "$(echo $cpucore | grep -E "linux.*aarch64.*")" ] && cpucore="armv8"
+[ -n "$(echo $cpucore | grep -E "linux.*armv7.*")" ] && cpucore="armv7"
+[ -n "$(echo $cpucore | grep -E "linux.*armv.*")" ] && cpucore="armv5"
+[ -n "$(echo $cpucore | grep -E "linux.*mips.*")" ] && cpucore="mipsle-softfloat"
+[ -n "$(echo $cpucore | grep -E "linux.*x86.*")" ] && cpucore="386"
+###
 echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "当前clash核心：\033[47;30m $clashcore \033[46;30m$clashv\033[0m"
 echo -e "\033[32m请选择需要下载的核心版本！\033[0m"
@@ -386,9 +403,7 @@ read -p "请输入对应数字 > " num
 	else
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[32mGeoIP数据库文件下载成功！\033[0m"
-			update
 	fi
-update
 }
 getdb(){
 host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
@@ -443,7 +458,7 @@ echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 echo -e "\033[30;47m您可以在此处切换在线更新时使用的资源地址\033[0m"
 echo -e "当前源：\033[4;32m$update_url\033[0m"
 echo -----------------------------------------------
-echo -e " 1 CDN源(感谢\033[4;32mwww.jsdelivr.com\033[0m，推荐)"
+echo -e " 1 CDN源(可能有一定的同步延迟)"
 echo -e " 2 Github源(不稳定，不推荐)"
 echo -e " 3 Github源+clash代理(需开启clash服务，推荐)"
 echo -e " 4 自定义输入(请务必确保路径正确)"
@@ -454,7 +469,7 @@ if	[ -z $num ]; then
 	echo -e "\033[31m请输入正确的数字！\033[0m"
 	update
 elif [[ $num == 1 ]]; then
-	update_url="https://cdn.jsdelivr.net/gh/juewuy/clash-for-Miwifi"
+	update_url="https://cdn.jsdelivr.net/gh/juewuy/clash-for-Miwifi@latest"
 elif [[ $num == 9 ]]; then
 	update_url="https://juewuy.xyz/clash"
 elif [[ $num == 2 ]]; then