v1.0.0beta7

~全面兼容Debian/Armbian/Centos等标准Linux系统
~增加配置本机代理功能
~重写启动脚本，优化在不同系统下的启动方式
~支持以systemd方式启动及守护进程
~~大幅度优化优化安装脚本及更新机制，修复cdn更新延迟
~修改定时任务机制，增加稳定性

README.md

@@ -1,84 +1,65 @@
-# clash-for-Miwifi
-在小米AX3600/AX1800/AX5等路由器上使用clash做透明代理
+# ShellClash（原Clash for Miwifi）
+在shell环境下一键部署及管理[clash](https://github.com/Dreamacro/clash)
 =====
-更新日志：
+
+功能简介：
 --
-
-•旧版本请重新下载[目录中除config.yaml和Country.mmdb以外的3个文件](https://github.com/juewuy/clash-for-Miwifi/tree/master/clash)上传到etc/clash后，并重新使用安装命令安装以完成更新<br>
-
-#### v0.2
-•合并Tun和Redir模式为一套文件，可以通过管理脚本直接切换<br>
-•同步官方最新premium版核心，全面支持ssr<br>
-•大幅度优化管理脚本，增加部分实用功能<br>
-
-#### v0.1
-•支持redir模式<br>
-•增加了一个简单的管理脚本<br>
-•支持ss、v2ray以及trojan协议，Redir模式额外支持ssr协议<br>
-
-#### 更早的版本
-•支持Tun模式<br>
-•支持ss、v2ray以及trojan协议<br>
-
-使用依赖：
---
-•请确认路由器或设备已经开启SSH并获取root权限，小米AX系列可参考：https://www.right.com.cn/forum/thread-4032490-1-1.html 开启<br>
-•SSH连接工具，例如putty，bitvise，JuiceSSH（支持安卓手机）等，请自行安装使用<br>
-•SCP连接工具，如winscp（内置了putty，只安装这一个其实就可以）<br>
+~通过管理脚本在shell环境下便捷使用[clash](https://github.com/Dreamacro/clash)<br>
+~支持在shell环境下管理[clash各种功能](https://lancellc.gitbook.io/clash)<br>
+~支持批量导入SS/SSR/v2ray/trojan节点链接及各种订阅链接<br>
+~支持使用/安装网页面板管理规则组<br>
+~支持局域网透明代理/纯净模式等多种模式切换<br>
+~支持在线更新<br>
 
 使用方式：
 --
-•下载 [目录中全部5个文件](https://github.com/juewuy/clash-for-Miwifi/tree/master/clash)到本地电脑 <br>
-•**根据自己需求参考文件内的注释，修改config.yaml配置文件并保存`重要！！！`**<br>
-•推荐使用notepad++打开yaml文件，如果只添加单个服务器可以直接在原示例上修改即可，多余的示例服务器不用删除<br>
-•可以使用 https://clash.skk.moe/proxy 生成单个节点配置；使用 https://acl4ssr.netlify.app 生成订阅或链接的节点配置<br>
-*·如有必要，也可以自行前往下载更新clash核心文件并自行改名<br>*
-•将下载并修改后的5个文件通过winSCP上传到路由器/etc/clash文件夹（clash文件夹请自行创建）下（最终应该是/etc/clash/"5个文件"）<br>
-•登陆SSH，并在SSH中用root用户执行下方的**对应命令**即可使用！<br>
-
-**首次安装**
+~确认路由器或设备已经开启SSH并获取root权限<br>
+~使用SSH连接工具（如putty，JuiceSSH，mac终端）登陆路由器或设备的SSH管理界面<br>
+~在SSH界面执行如下安装命令，并按照提示安装clash管理脚本<br>
+OpenWrt系统：
 ```Shell
-mv /etc/clash/clashservice /etc/init.d/clash #移动clash服务文件
-mv /etc/clash/clashsh /bin/clash             #移动clash管理脚本
-chmod  777 /etc/clash/clash                  #授予权限
-chmod  777 /etc/init.d/clash                 #授予权限
-chmod  777 /bin/clash                        #授予权限
-clash                                        #使用管理脚本
+sh -c "$(curl -kfsSl --resolve raw.githubusercontent.com:443:199.232.68.133 https://raw.githubusercontent.com/juewuy/ShellClash/master/install.sh)" && source /etc/profile &> /dev/null
 ```
-**管理脚本**
-```Shell 
-clash                                        #使用管理脚本
+或者
+```Shell
+sh -c "$(curl -kfsSl https://cdn.jsdelivr.net/gh/juewuy/ShellClash/install_cdn.sh)" && source /etc/profile &> /dev/null
+```
+Debian/CenOS/Armbian等默认使用dash的Linux系统：
+```Shell
+bash -c "$(curl -kfsSl --resolve raw.githubusercontent.com:443:199.232.68.133 https://raw.githubusercontent.com/juewuy/ShellClash/master/install.sh)" && source /etc/profile &> /dev/null
+```
+或者
+```Shell
+bash -c "$(curl -kfsSl https://cdn.jsdelivr.net/gh/juewuy/ShellClash/install_cdn.sh)" && source /etc/profile &> /dev/null
+```
+~安装完成管理脚本后，执行如下命令以运行管理脚本<br>
+```Shell
+clash
 ```
-•启用后可以通过 http://clash.razord.top （或者 https://yacd.haishan.me ） （Host为网关IP，端口为9999，密钥为空）管理clash内置规则<br>
 
-故障解决：
+设备支持：
 --
-•部分设备安装时提示bin目录只读（readonly）：可以通过输入mount -o remount rw /bin 来使目录临时可写，之后重新执行安装命令即可完成安装<br>
-•如果https://yacd.haishan.me 打不开：请尝试使用 http://clash.razord.top http://app.tossp.com  或者尝试清理浏览器缓存<br>
-•如果能正常连接国内网站而无法访问屏蔽网站：请在浏览器中打开 http://clash.razord.top 并使用测速功能，之后手动指定服务器即可；如果所有服务器都不可用即代表配置文件有问题<br>
-•全局模式无效：全局模式启用后请在管理面板手动勾选代理节点即可<br>
-•其他问题请前往我的tg群询问 https://t.me/clashfm <br>
+~支持小米/红米全系使用官方系统或官方开发版系统的路由器设备（ac2100系列除外）<br>
+~支持所有基于openwrt或使用openwrt二次开发的路由器设备<br>
+~支持各种运行标准Linux系统（Debian/CenOS/Armbian等）的设备<br>
+~如有不兼容的Linux设备或CPU架构请提issue或前往TG群反馈（需提供设备名称及运行uname -a返回的设备核心信息）<br>
+
+更新日志：
+--
+https://github.com/juewuy/ShellClash/releases
+
+交流反馈：
+--
+### https://t.me/clashfm 
 
 已知问题：
 --
-•由于使用了clash的fake-ip模式，故两种模式均不支持ipv6<br>
-•Tun模式下clash服务可能会和小米路由器内置的tx网游加速器冲突，请谨慎同时使用<br>
-•Tun模式下部分软件不会经过clash，例如telegram，可以通过设置软件内置sock5（IP=路由IP，port=7891）或http代理（IP=路由IP，port=7890）解决<br>
-•Redir模式无法转发udp流量，外服游戏可能会受影响，此功能是由官方系统阉割了Tproxy导致，暂时无解，外服游戏用户建议使用Tun模式<br>
+~Tun模式下clash服务可能会和路由器内置的网游加速器冲突，请谨慎同时使用<br>
+~Redir模式暂不支持转发udp流量，外服游戏可能会受影响，外服游戏用户建议使用Tun模式<br>
+~部分设备长时间使用会出现内存占用偏高——此为golang内存回收不及时导致，可以通过屏蔽p2p流量及设置每日定时重启核心以缓解<br>
+~节点无法连接——在【clash功能设置】中打开【跳过本地证书验证】<br>
+~非OpenWrt系统下定时任务不工作，待修复<br>
 
-ToDo：
+友情推广：
 --
-•管理脚本增加订阅功能<br>
-•管理脚本增加更新功能<br>
-•添加一键安装脚本<br>
-•修复redir-host DNS以及IPV6支持<br>
-•……<br>
-
-
-感谢：
---
-•https://lancellc.gitbook.io/clash/start-clash/clash-tun-mode<br>
-•https://comzyh.gitbook.io/clash/<br>
-•https://h-cheung.gitlab.io/post/使用_clash_和路由表实现透明代理<br>
-•https://www.right.com.cn/forum/thread-4042741-1-1.html<br>
-
+https://dler.best/auth/register?affid=89698

bin/clash/version

@@ -0,0 +1 @@
+version=1.1.0

bin/clashpre/version

@@ -0,0 +1 @@
+version=2020.08.16

bin/clashr/version

@@ -0,0 +1 @@
+version=1.0.0

bin/config.yaml

@@ -106,8 +106,6 @@ proxy-groups:
 # 规则
 rules:
 # Unbreak
-#clash面板
-- DOMAIN,clash.razord.top,DIRECT
 # > Google
 - DOMAIN-SUFFIX,googletraveladservices.com,DIRECT
 - DOMAIN,dl.google.com,DIRECT

bin/version

@@ -0,0 +1,2 @@
+GeoIP_v=20200917
+versionsh=1.0.0beta7

clash/clashservice

@@ -1,64 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Example script
-# Copyright (C) 2007 OpenWrt.org
-
-USE_PROCD=1
-START=99
-start_redir(){
-	#修改iptables规则使流量进入clash
-	iptables -t nat -N clash
-	iptables -t nat -A clash -d 0.0.0.0/8 -j RETURN
-	iptables -t nat -A clash -d 10.0.0.0/8 -j RETURN
-	iptables -t nat -A clash -d 127.0.0.0/8 -j RETURN
-	iptables -t nat -A clash -d 169.254.0.0/16 -j RETURN
-	iptables -t nat -A clash -d 172.16.0.0/12 -j RETURN
-	iptables -t nat -A clash -d 192.168.0.0/16 -j RETURN
-	iptables -t nat -A clash -d 224.0.0.0/4 -j RETURN
-	iptables -t nat -A clash -d 240.0.0.0/4 -j RETURN
-	iptables -t nat -A clash -p tcp -j REDIRECT --to-ports 7892
-	iptables -t nat -A PREROUTING -p tcp -j clash
-	iptables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to 1053
-}
-stop_redir(){
-    #重置iptables规则
-	iptables -t nat -D PREROUTING -p tcp -j clash > /dev/null 2>&1
-	iptables -t nat -F clash > /dev/null 2>&1
-	iptables -t nat -X clash > /dev/null 2>&1
-	iptables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
-}
-start_tun(){
-	#修改iptables规则使流量进入clash
-	iptables -I FORWARD -o utun -j ACCEPT
-	iptables -t nat -I PREROUTING -p udp --dport 53 -j REDIRECT --to 1053
-}
-stop_tun(){
-	iptables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
-}
-start_service() {
-    #创建clash后台进程
-	procd_open_instance
-	procd_set_param respawn
-	procd_set_param stderr 1
-	procd_set_param stdout 1
-	procd_set_param command /etc/clash/clash -d /etc/clash
-	procd_close_instance
-	#修改iptables规则使流量进入clash
-	Mod=`cat /bin/clash | grep 'Mark3=' -m1`
-	result=$(echo $Mod | grep "Tun模式")
-	if [[ "$result" != "" ]];then
-		stop_tun
-		start_tun
-	else
-		stop_redir
-		start_redir
-	fi
-}
-stop_service() {
-	Mod=`cat /bin/clash | grep 'Mark3=' -m1`
-	result=$(echo $Mod | grep "Tun模式")
-	if [[ "$result" != "" ]];then
-		stop_tun
-	else
-		stop_redir
-	fi
-}

clash/clashsh

@@ -1,224 +0,0 @@
-#!/bin/sh
-# Copyright (C) Juewuy
-
-echo "***********************************************"
-echo "**                 欢迎使用                  **"
-echo "**             Clash for Miwifi              **"
-echo "**                             by  Juewuy    **"
-echo "***********************************************"
-Mark1=""
-Mark2="\033[31m未设置开机启动！\033[0m"
-Mark3="Tun模式"
-
-clashlink(){
-echo 施工中，敬请期待！
-clashsh
-} 
-clashadv(){
-echo -----------------------------------------------
-echo -e "\033[33m欢迎使用高级模式菜单：\033[0m"
-echo 1 切换代理模式（Tun/Redir）
-echo 2 更新clash核心文件（施工中）
-echo 3 更新GeoIP数据库（施工中）
-echo 4 更新管理脚本（施工中）
-echo 9 卸载clash
-echo 0 返回上级菜单 
-read -p "请输入对应数字 > " num
-if [[ $num -le 9 ]] > /dev/null 2>&1; then 
-  if [[ $num == 0 ]]; then
-    clashsh
-  
-  elif [[ $num == 1 ]]; then
-    echo -----------------------------------------------
-    echo -e "当前代理模式为：\033[47;30m $Mark3 \033[0m"
-	echo -e "\033[33m切换模式时会重启clash服务，可能会导致短时间的网络中断！\033[0m"
-	echo "1 Tun模式：  支持UDP转发且延迟低"
-	echo "             但CPU及内存占用更高"
-	echo "             适合外服游戏用户"
-	echo "2 Redir模式：CPU以及内存占用较低"
-	echo "             但不支持UDP流量转发"
-	echo "             日常使用推荐此模式"
-	echo 0 返回上级菜单 
-	read -p "请输入对应数字 > " num
-	if [[ $num == 0 ]]; then
-	  clashadv
-	elif [[ $num == 1 ]]; then
-	  if [[ $Mark3 = "Redir模式" ]]; then
-		sed -i '1,20s/Redir模式/Tun模式/' /bin/clash		#修改Mark3标记
-	    sed -i '1,40s/tun: {enable: false/tun: {enable: true/' /etc/clash/config.yaml		#修改配置文件
-		if [ $Number1 -gt 0 ];then
-		echo -----------------------------------------------
-		echo -e "\033[33m正在重启clash进程……\033[0m"
-		/etc/init.d/clash stop > /dev/null 2>&1
-		fi	  
-		/etc/init.d/clash start
-		Number2=`ps |grep -w /etc/clash/clash|grep -v grep|wc -l`	  
-		if [ $Number2 -gt 0 ];then
-		echo -----------------------------------------------
-		echo -e "\033[32mclash服务已启动！\033[0m"
-		echo -e "\033[33mclash已成功切换为：\033[47;34m Tun模式! \033[0m"
-		echo -e 可以使用 "\033[32mhttp://clash.razord.top\033[0m"（IP为网关IP，端口为9999）管理clash内置规则
-		Mark3="Tun模式"
-		clashsh
-		else
-		echo -----------------------------------------------
-		echo -e "\033[31mclash服务启动失败！请检查配置文件！\033[0m"
-		clashsh
-		fi  
-	  else
-	    echo -----------------------------------------------
-		echo -e "\033[33m当前已经处于Tun模式，无需重复设置！\033[0m"
-		clashadv
-	  fi
-	  
-	elif [[ $num == 2 ]]; then
-	  if [[ $Mark3 = "Tun模式" ]]; then
-		sed -i '1,20s/Tun模式/Redir模式/' /bin/clash		#修改Mark3标记
-	  	sed -i '1,40s/tun: {enable: true/tun: {enable: false/' /etc/clash/config.yaml		#修改配置文件
-		if [ $Number1 -gt 0 ];then
-		echo -----------------------------------------------
-		echo -e "\033[33m正在重启clash进程……\033[0m"
-		/etc/init.d/clash stop > /dev/null 2>&1
-		fi	  
-		/etc/init.d/clash start
-		Number2=`ps |grep -w /etc/clash/clash|grep -v grep|wc -l`	  
-		if [ $Number2 -gt 0 ];then
-		echo -----------------------------------------------
-		echo -e "\033[32mclash服务已启动！\033[0m"
-		echo -e "\033[33mclash已成功切换为：\033[47;34m Redir模式! \033[0m"
-		echo -e 可以使用 "\033[32mhttp://clash.razord.top\033[0m"（IP为网关IP，端口为9999）管理clash内置规则
-		Mark3="Redir模式"
-		clashsh
-		else
-		echo -----------------------------------------------
-		echo -e "\033[31mclash服务启动失败！请检查配置文件！\033[0m"
-		clashsh
-		fi  
-	  else
-	    echo -----------------------------------------------
-		echo -e "\033[33m当前已经处于Redir模式，无需重复设置！\033[0m"
-		clashadv
-	  fi
-	else
-	  echo -e "\033[31m请输入正确的数字！\033[0m"
-      clashadv
-	fi
-	
-  elif [[ $num == 9 ]]; then
-    read -p "确认卸载clash？（警告：该操作不可逆！）[1/0] " res
-	if [ "$res" = '1' ]; then
-    /etc/init.d/clash disable
-    /etc/init.d/clash stop
-    rm -rf /etc/clash
-    rm /etc/init.d/clash
-    rm /bin/clash
-    echo 已卸载clash相关文件！
-	fi
-    exit;
-  else
-    echo -e "\033[31m暂未支持的选项！\033[0m"
-    clashadv
-  fi
-else
-  echo -e "\033[31m请输入正确的数字！\033[0m"
-  clashsh
-fi
-exit;
-}
-clashsh(){
-Number1=`ps |grep -w /etc/clash/clash|grep -v grep|wc -l`
-if [ $Number1 -gt 0 ];then
-Mark1="\033[32m正在运行（$Mark3）\033[0m"
-else
-Mark1="\033[31m没有运行（$Mark3）\033[0m"
-fi
-echo -----------------------------------------------
-echo -e "Clash服务$Mark1,$Mark2"
-echo 1 启动/重启clash服务
-echo 2 测试代理服务器连通性
-echo 3 停止clash服务
-echo 4 允许clash开机启动
-echo 5 禁止clash开机启动
-echo 6 使用链接导入节点/订阅
-echo 7 高级设置
-echo 0 退出脚本
-read -p "请输入对应数字 > " num
-if [[ $num -le 7 ]] > /dev/null 2>&1; then 
-  if [[ $num == 0 ]]; then
-  exit;
-  
-  elif [[ $num == 1 ]]; then
-    if [ $Number1 -gt 0 ];then
-	echo -----------------------------------------------
-	/etc/init.d/clash stop > /dev/null 2>&1
-	echo -e "\033[31mClash服务已停止！\033[0m"
-	sleep 1
-	fi
-    /etc/init.d/clash start
-    Number2=`ps |grep -w /etc/clash/clash|grep -v grep|wc -l`
-      if [ $Number2 -gt 0 ];then
-	  echo -----------------------------------------------
-      echo -e "\033[32mclash服务已启动！\033[0m"
-	  echo 可以使用 http://clash.razord.top （IP为网关IP，端口为9999）管理clash内置规则
-	  clashsh
-      else
-	  echo -----------------------------------------------
-      echo -e "\033[31mclash服务启动失败！请检查配置文件！\033[0m"
-	  clashsh
-      fi
-	  exit;
-  
-  elif [[ $num == 2 ]]; then
-      echo 注意：连续多次测试可能会导致IP暂时被GitHub封禁！
-      delay=`curl -kx socks5://127.0.0.1:7891 -o /dev/null -s -w '%{time_total}' 'https://github.com' & { sleep 3 ; kill $! & }` > /dev/null 2>&1
-	  delay0=`expr length x$delay`
-	  #echo $delay
-	  if [ $delay0 == 1 ];then
-      echo ----------------------------------------------
-      echo '连接超时（>3s），请检查节点信息！'
-	  clashsh
-	  else
-	  echo -----------------------------------------------
-	  echo 连接成功！响应时间为：$delay秒
-	  clashsh
-	  fi
-
-  elif [[ $num == 3 ]]; then
-  /etc/init.d/clash stop > /dev/null 2>&1
-  echo -----------------------------------------------
-  echo -e "\033[31mClash服务已停止！\033[0m"
-  echo -----------------------------------------------
-  exit;
-
-  elif [[ $num == 4 ]]; then
-  /etc/init.d/clash enable
-  sed -i '1,20s/1m未/2m已/' /bin/clash
-  echo -----------------------------------------------
-  echo -e "\033[32m已设置Clash开机启动！\033[0m"
-  Mark2="\033[32m已设置开机启动！\033[0m"
-  clashsh
-
-  elif [[ $num == 5 ]]; then
-  /etc/init.d/clash disable
-  sed -i '1,20s/2m已/1m未/' /bin/clash
-  echo -----------------------------------------------
-  echo -e "\033[33m已禁止Clash开机启动！\033[0m"
-  Mark2="\033[31m未设置开机启动！\033[0m"
-  clashsh
-    
-  elif [[ $num == 6 ]]; then
-  clashlink
-
-  elif [[ $num == 7 ]]; then
-  clashadv
-  
-  else
-  echo -e "\033[31m请输入正确的数字！\033[0m"
-  fi
-  exit 1
-else
-echo -e "\033[31m请输入正确的数字！\033[0m"
-fi
-exit 1
-}
-clashsh

clash/test.ini

@@ -1 +0,0 @@
-test

install.sh

@@ -0,0 +1,101 @@
+#! /bin/bash
+# Copyright (C) Juewuy
+
+echo "***********************************************"
+echo "**                 欢迎使用                  **"
+echo "**                ShellClash                 **"
+echo "**                             by  Juewuy    **"
+echo "***********************************************"
+url="https://cdn.jsdelivr.net/gh/juewuy/ShellClash"
+release_new=$(curl -kfsSL --resolve api.github.com:443:140.82.113.5 "https://api.github.com/repos/juewuy/ShellClash/releases/latest" | grep "tag_name" | head -n 1 | awk -F ":" '{print $2}' | sed 's/\"//g;s/,//g;s/ //g')
+[ -z "$release_new" ] && release_new=$(curl -kfsSL $url/bin/version | grep "versionsh" | awk -F "=" '{print $2}')
+[ -z "$release_new" ] && echo "无法连接服务器！" && exit
+echo -e "最新版本：\033[32m$release_new\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[44m如遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo -e "\033[37m支持各种基于openwrt的路由器设备"
+echo -e "\033[33m有限兼容debian、centos等Linux系统\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[32m 1 在默认目录(/etc)安装ShellClash"
+echo -e "\033[33m 2 手动设置安装目录（不明勿用！）"
+echo -e "\033[0m 0 退出安装"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+read -p "请输入相应数字 > " num
+
+if [ -z $num ];then
+	echo 安装已取消
+	exit;
+elif [ "$num" = "1" ];then
+	dir=/etc
+elif [ "$num" = "2" ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo '可用路径 剩余空间:'
+	df -h | awk '{print $6,$2}'| sed 1d 
+	echo '路径是必须带 / 的格式，写入虚拟内存(/tmp,/sys,..)的文件会在重启后消失！！！'
+	read -p "请输入自定义路径 > " dir
+	if [ -z $dir ];then
+		echo 路径错误！已取消安装！
+		exit;
+	fi
+else
+	echo 安装已取消
+	exit;
+fi
+#下载文件包
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始从服务器获取安装文件！
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+tarurl=$url@$release_new/bin/clashfm.tar.gz
+if command -v curl &> /dev/null; then
+	result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $tarurl)
+else $result
+	wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $tarurl
+	[ $? -eq 0 ] && result="200"
+fi
+[ "$result" != "200" ] && echo "文件下载失败！" && exit 1
+#解压
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始解压文件！
+mkdir -p $dir/clash > /dev/null
+tar -zxvf '/tmp/clashfm.tar.gz' -C $dir/clash/
+[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+#判断系统类型写入不同的启动文件
+if [ -n "$(cat /proc/version | grep -i openwrt)" ];then
+	mv $dir/clash/clashservice /etc/init.d/clash #将rc服务文件移动到系统目录
+	chmod  777 /etc/init.d/clash #授予权限
+	rm -rf $dir/clash/clash.service 
+else
+	[ -d /etc/systemd/system ] && sysdir=/etc/systemd/system
+	[ -d /usr/lib/systemd/system/ ] && sysdir=/usr/lib/systemd/system/ 
+	mv $dir/clash/clash.service $sysdir/clash.service #将service服务文件移动到系统目录
+	sed -i "s%/etc/clash%${dir}/clash%g" $sysdir/clash.service
+	rm -rf $dir/clash/clashservice
+	rm -rf /etc/init.d/clash
+fi
+#初始化文件目录
+if [ ! -f "$dir/clash/mark" ]; then
+cat >$dir/clash/mark<<EOF
+#标识clash运行状态的文件，不明勿动！
+EOF
+fi
+#修饰文件及版本号
+shtype=sh && [ -n "$(ls -l /bin/sh|grep -o dash)" ] && shtype=bash 
+sed -i "s%#!/bin/sh%#!/bin/$shtype%g" $dir/clash/start.sh
+chmod  777 $dir/clash/start.sh
+sed -i '/versionsh_l=*/'d $dir/clash/mark
+sed -i "1i\versionsh_l=$release_new" $dir/clash/mark
+#设置环境变量
+
+sed -i '/alias clash=*/'d /etc/profile
+echo "alias clash=\"$shtype $dir/clash/clash.sh\"" >> /etc/profile #设置快捷命令环境变量
+sed -i '/export clashdir=*/'d /etc/profile
+echo "export clashdir=\"$dir/clash\"" >> /etc/profile #设置clash路径环境变量
+#删除临时文件
+rm -rf /tmp/clashfm.tar.gz 
+#提示
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo ShellClash 已经安装成功!
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[33m输入\033[30;47m clash \033[0;33m命令即可管理！！！\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+

install_cdn.sh

@@ -0,0 +1,101 @@
+#! /bin/bash
+# Copyright (C) Juewuy
+
+echo "***********************************************"
+echo "**                 欢迎使用                  **"
+echo "**                ShellClash                 **"
+echo "**                             by  Juewuy    **"
+echo "***********************************************"
+url="https://cdn.jsdelivr.net/gh/juewuy/ShellClash"
+release_new=$(curl -kfsSL --resolve api.github.com:443:140.82.113.5 "https://api.github.com/repos/juewuy/ShellClash/releases/latest" | grep "tag_name" | head -n 1 | awk -F ":" '{print $2}' | sed 's/\"//g;s/,//g;s/ //g')
+[ -z "$release_new" ] && release_new=$(curl -kfsSL $url/bin/version | grep "versionsh" | awk -F "=" '{print $2}')
+[ -z "$release_new" ] && echo "无法连接服务器！" && exit
+echo -e "最新版本：\033[32m$release_new\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[44m如遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo -e "\033[37m支持各种基于openwrt的路由器设备"
+echo -e "\033[33m有限兼容debian、centos等Linux系统\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[32m 1 在默认目录(/etc)安装ShellClash"
+echo -e "\033[33m 2 手动设置安装目录（不明勿用！）"
+echo -e "\033[0m 0 退出安装"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+read -p "请输入相应数字 > " num
+
+if [ -z $num ];then
+	echo 安装已取消
+	exit;
+elif [ "$num" = "1" ];then
+	dir=/etc
+elif [ "$num" = "2" ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo '可用路径 剩余空间:'
+	df -h | awk '{print $6,$2}'| sed 1d 
+	echo '路径是必须带 / 的格式，写入虚拟内存(/tmp,/sys,..)的文件会在重启后消失！！！'
+	read -p "请输入自定义路径 > " dir
+	if [ -z $dir ];then
+		echo 路径错误！已取消安装！
+		exit;
+	fi
+else
+	echo 安装已取消
+	exit;
+fi
+#下载文件包
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始从服务器获取安装文件！
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+tarurl=$url@$release_new/bin/clashfm.tar.gz
+if command -v curl &> /dev/null; then
+	result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $tarurl)
+else $result
+	wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $tarurl
+	[ $? -eq 0 ] && result="200"
+fi
+[ "$result" != "200" ] && echo "文件下载失败！" && exit 1
+#解压
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始解压文件！
+mkdir -p $dir/clash > /dev/null
+tar -zxvf '/tmp/clashfm.tar.gz' -C $dir/clash/
+[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+#判断系统类型写入不同的启动文件
+if [ -n "$(cat /proc/version | grep -i openwrt)" ];then
+	mv $dir/clash/clashservice /etc/init.d/clash #将rc服务文件移动到系统目录
+	chmod  777 /etc/init.d/clash #授予权限
+	rm -rf $dir/clash/clash.service 
+else
+	[ -d /etc/systemd/system ] && sysdir=/etc/systemd/system
+	[ -d /usr/lib/systemd/system/ ] && sysdir=/usr/lib/systemd/system/ 
+	mv $dir/clash/clash.service $sysdir/clash.service #将service服务文件移动到系统目录
+	sed -i "s%/etc/clash%${dir}/clash%g" $sysdir/clash.service
+	rm -rf $dir/clash/clashservice
+	rm -rf /etc/init.d/clash
+fi
+#初始化文件目录
+if [ ! -f "$dir/clash/mark" ]; then
+cat >$dir/clash/mark<<EOF
+#标识clash运行状态的文件，不明勿动！
+EOF
+fi
+#修饰文件及版本号
+shtype=sh && [ -n "$(ls -l /bin/sh|grep -o dash)" ] && shtype=bash 
+sed -i "s%#!/bin/sh%#!/bin/$shtype%g" $dir/clash/start.sh
+chmod  777 $dir/clash/start.sh
+sed -i '/versionsh_l=*/'d $dir/clash/mark
+sed -i "1i\versionsh_l=$release_new" $dir/clash/mark
+#设置环境变量
+
+sed -i '/alias clash=*/'d /etc/profile
+echo "alias clash=\"$shtype $dir/clash/clash.sh\"" >> /etc/profile #设置快捷命令环境变量
+sed -i '/export clashdir=*/'d /etc/profile
+echo "export clashdir=\"$dir/clash\"" >> /etc/profile #设置clash路径环境变量
+#删除临时文件
+rm -rf /tmp/clashfm.tar.gz 
+#提示
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo ShellClash 已经安装成功!
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[33m输入\033[30;47m clash \033[0;33m命令即可管理！！！\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+

scripts/clash.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=clash
+After=network.target
+
+[Service]
+Type=simple
+User=root
+ExecStart=/etc/clash/clash -d /etc/clash
+ExecStartPost=/etc/clash/start.sh afstart
+Restart=on-failure
+RestartSec=3s
+
+
+[Install]
+WantedBy=multi-user.target

scripts/clashservice

@@ -0,0 +1,20 @@
+#!/bin/sh /etc/rc.common
+# Example script
+# Copyright (C) 2007 OpenWrt.org
+
+USE_PROCD=1
+START=92
+
+start_service() {
+	#开机加载环境变量保证找到文件路径
+	source /etc/profile > /dev/null 2>&1
+    #创建clash后台进程
+	procd_open_instance
+	procd_set_param respawn
+	procd_set_param stderr 1
+	procd_set_param stdout 1
+	procd_set_param command $clashdir/clash -d $clashdir
+	procd_close_instance
+	#其他设置
+	sh $clashdir/start.sh afstart
+}

scripts/getdate.sh

@@ -0,0 +1,552 @@
+#!/bin/bash
+# Copyright (C) Juewuy
+
+linkconfig(){
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo 当前使用规则为：$rule_link
+echo 1 ACL4SSR默认通用版
+echo 2 ACL4SSR精简全能版（推荐）
+echo 3 ACL4SSR通用版+去广告加强
+echo 4 ACL4SSR精简版+去广告加强
+echo 5 ACL4SSR通用版无去广告
+echo 6 ACL4SSR通用版无自动测速
+echo 7 ACL4SSR精简版无自动测速
+echo 8 ACL4SSR全分组+奈飞（慎用）
+echo 9 ACL4SSR全分组+去广告（慎用）
+echo -----------------------------------------------
+echo 0 返回上级菜单
+read -p "请输入对应数字 > " num
+if [ -z "$num" ] || [[ $num -gt 9 ]];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+elif [[ "$num" = 0 ]];then
+	echo 
+elif [[ $num -le 9 ]];then
+	#将对应标记值写入mark
+	sed -i '/rule_link*/'d $ccfg
+	sed -i "4i\rule_link="$num"" $ccfg	
+	rule_link=$num
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
+	echo -e "\033[32m设置成功！返回上级菜单\033[0m"
+fi
+}
+linkserver(){
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo 当前使用后端为：$server_link
+echo 1 subconverter-web.now.sh
+echo 2 subconverter.herokuapp.com
+echo 3 subcon.py6.pw
+echo 4 api.dler.io
+echo 5 api.wcc.best
+echo 6 skapi.cool
+echo -----------------------------------------------
+echo 0 返回上级菜单
+read -p "请输入对应数字 > " num
+if [ -z "$num" ] || [[ $num -gt 6 ]];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+elif [[ "$num" = 0 ]];then
+	echo
+elif [[ $num -le 6 ]];then
+	#将对应标记值写入mark
+	sed -i '/server_link*/'d $ccfg
+	sed -i "4i\server_link="$num"" $ccfg	
+	server_link=$num
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
+	echo -e "\033[32m设置成功！返回上级菜单\033[0m"
+fi
+}
+linkfilter(){
+[ -z "$exclude" ] && exclude="未设置"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo -e "\033[33m当前过滤关键字：\033[47;30m$exclude\033[0m"
+echo -----------------------------------------------
+echo -e "\033[36m匹配关键字的节点会在导入时被屏蔽\033[0m"
+echo -e "多个关键字可以用\033[30;47m | \033[0m号分隔"
+echo -e "\033[32m支持正则表达式\033[0m，特殊符号请使用\033[30;47m \ \033[0m号转义"
+echo -----------------------------------------------
+echo -e " 000   \033[31m删除\033[0m关键字"
+echo -e " 回车  取消输入并返回上级菜单"
+echo -----------------------------------------------
+read -p "请输入关键字 > " exclude
+if [ -z "$exclude" ]; then
+	linkset
+elif [ "$exclude" = '000' ]; then
+	echo -----------------------------------------------
+	exclude=''
+	echo -e "\033[31m 已删除节点过滤关键字！！！\033[0m"
+fi
+sed -i '/exclude=*/'d $ccfg
+sed -i "1i\exclude=\'$exclude\'" $ccfg
+linkset
+}
+linkset(){
+if [ -n $Url ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[47;30m请检查输入的链接是否正确：\033[0m"
+	echo -e "\033[32;4m$Url\033[0m"
+	echo -----------------------------------------------
+	echo -e " 1 \033[32m生成配置文件（原文件将被备份）\033[0m"
+	echo -e " 2 \033[36m添加/修改节点过滤关键字 \033[47;30m$exclude\033[0m"
+	echo -e " 3 \033[33m选取配置规则模版\033[0m"
+	echo -e " 4 \033[0m选取在线生成服务器\033[0m"
+	echo -e " 5 \033[0m跳过本地证书验证：	\033[36m$skip_cert\033[0m   ————解决节点证书验证错误"
+	echo -----------------------------------------------
+	echo -e " 0 \033[31m取消导入\033[0m并返回上级菜单"
+	echo -----------------------------------------------
+	read -p "请输入对应数字 > " num
+	if [ -z "$num" ]; then
+		clashlink
+	elif [ "$num" = '0' ]; then
+		clashlink
+	elif [ "$num" = '1' ]; then
+		#将用户链接写入mark
+		sed -i '/Url=*/'d $ccfg
+		sed -i '/Https=*/'d $ccfg
+		sed -i "6i\Url=\'$Url\'" $ccfg
+		Https=""
+		#获取在线yaml文件
+		$clashdir/start.sh getyaml
+	elif [ "$num" = '2' ]; then
+		linkfilter
+		linkset
+	elif [ "$num" = '3' ]; then
+		linkconfig
+		linkset
+	elif [ "$num" = '4' ]; then
+		linkserver
+		linkset
+	elif [ "$num" = '5' ]; then
+		sed -i '/skip_cert*/'d $ccfg
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		if [ "$skip_cert" = "未开启" ] > /dev/null 2>&1; then 
+			sed -i "1i\skip_cert=已开启" $ccfg
+			#echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
+			skip_cert=已开启
+		else
+			sed -i "1i\skip_cert=未开启" $ccfg
+			#echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
+			skip_cert=未开启
+		fi
+		linkset
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		linkset
+	fi
+	clashlink
+fi
+}
+getlink(){
+#设置输入循环
+i=1
+while [ $i -le 99 ]
+do
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[44m 遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+	echo -----------------------------------------------
+	echo -e "支持批量导入\033[30;46m Http/Https/Clash \033[0m等格式的订阅链接"
+	echo -e "以及\033[30;42m Vmess/SSR/SS/Trojan/Sock5 \033[0m等格式的节点链接"
+	echo -----------------------------------------------
+	echo -e "多个较短的链接可以用\033[30;47m | \033[0m号分隔以一次性输入"
+	echo -e "多个较长的链接可分次输入，支持多达\033[30;47m 99 \033[0m次输入"
+	echo -----------------------------------------------
+	echo -e "回车 \033[32m完成输入\033[0m并开始导入链接！"
+	echo -e " 0   \033[33m取消输入\033[0m并返回上级菜单"
+	echo -----------------------------------------------
+	read -p "请输入第"$i"个链接 > " url
+	test=$(echo $url | grep "://")
+	url=`echo ${url/\ \(*\)/''}`   #删除恶心的超链接内容
+	url=`echo ${url/*\&url\=/""}`   #将clash完整链接还原成单一链接
+	url=`echo ${url/\&config\=*/""}`   #将clash完整链接还原成单一链接
+	url=`echo ${url//\&/\%26}`   #将分隔符 & 替换成urlcode：%26
+	if [[ "$test" != "" ]];then
+		if [[ -z $Url ]];then
+			Url="$url"
+		else
+			Url="$Url"\|"$url"
+		fi
+		i=$(($i+1))
+	elif [ -z $url ];then
+		linkset
+	elif [[ $url == 0 ]];then
+		clashlink
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的订阅/分享链接！！！\033[0m"
+	fi
+done
+####
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 输入太多啦，可能会导致订阅失败！
+echo "多个较短的链接请尽量用“|”分隔以一次性输入！"
+clashlink
+} 
+getlink2(){
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;47m 此功能不明勿用，出问题自行解决！\033[0m"
+echo -----------------------------------------------
+echo -e "\033[33m仅限导入完整clash链接！！！\033[0m"
+echo -e "可以使用\033[32m https://acl4ssr.netlify.app \033[0m在线转换"
+echo -e "\033[36m导入后如无法运行，请使用【导入节点/订阅链接】功能"
+echo -e "\033[31m注意如节点使用了chacha20加密协议，需将核心更新为clashr核心\033[0m"
+echo -----------------------------------------------
+echo -e "\033[33m0 返回上级菜单\033[0m"
+echo -----------------------------------------------
+read -p "请输入完整链接 > " Https
+test=$(echo $Https | grep "://")
+Https=`echo ${Https/\ \(*\)/''}`   #删除恶心的超链接内容
+#Https=`echo ${Https//\&/\%26}`   #将分隔符 & 替换成Httpscode：%26
+if [ -n $Https ];then
+	if [ -n $test ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e 请检查输入的链接是否正确：
+		echo -e "\033[4m$Https\033[0m"
+		read -p "确认导入配置文件？原配置文件将被更名为config.yaml.bak![1/0] > " res
+			if [ "$res" = '1' ]; then
+				#将用户链接写入mark
+				sed -i '/Url=*/'d $ccfg
+				sed -i '/Https=*/'d $ccfg
+				sed -i "6i\Https=\'$Https\'" $ccfg
+				#获取在线yaml文件
+				$clashdir/start.sh getyaml
+			fi
+			clashlink
+	fi
+elif [[ $Https == 0 ]];then
+	clashlink
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的链接地址！！！\033[0m"
+fi
+}
+getsh(){
+echo -----------------------------------------------
+echo -e "当前脚本版本为：\033[33m $versionsh_l \033[0m"
+echo -e "最新脚本版本为：\033[32m $release_new \033[0m"
+echo -----------------------------------------------
+read -p "是否更新脚本？[1/0] > " res
+if [ "$res" = '1' ]; then
+	if command -v curl &> /dev/null; then
+		echo 正在获取更新文件
+		result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $update_url/bin/clashfm.tar.gz)
+	else $result
+		wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $update_url/bin/clashfm.tar.gz
+		[ $? -eq 0 ] && result="200"
+	fi
+	[ "$result" != "200" ] && echo "文件下载失败！" && exit 1
+	#解压
+	echo -----------------------------------------------
+	echo 开始解压文件！
+	mkdir -p $clashdir > /dev/null
+	tar -zxvf '/tmp/clashfm.tar.gz' -C $clashdir/ > /dev/null
+	[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+	#判断系统类型写入不同的启动文件
+	if [ -n "$(cat /proc/version | grep -i openwrt)" ];then
+		mv $clashdir/clashservice /etc/init.d/clash #将rc服务文件移动到系统目录
+		chmod  777 /etc/init.d/clash #授予权限
+		rm -rf $clashdir/clash.service 
+	else
+		[ -d /etc/systemd/system ] && sysdir=/etc/systemd/system
+		[ -d /usr/lib/systemd/system/ ] && sysdir=/usr/lib/systemd/system/ 
+		mv $clashdir/clash.service $sysdir/clash.service #将service服务文件移动到系统目录
+		sed -i "s%/etc/clash%${clashdir}%g" $sysdir/clash.service
+		rm -rf $clashdir/clashservice
+		rm -rf /etc/init.d/clash
+	fi
+	#修饰文件及版本号
+	shtype=sh && [ -n "$(ls -l /bin/sh|grep -o dash)" ] && shtype=bash 
+	sed -i "s%#!/bin/sh%#!/bin/$shtype%g" $clashdir/start.sh
+	chmod  777 $clashdir/start.sh
+	sed -i '/versionsh_l=*/'d $ccfg
+	sed -i "1i\versionsh_l=$release_new" $ccfg
+	#删除临时文件
+	rm -rf /tmp/clashfm.tar.gz 
+	rm -rf /tmp/clashversion
+	#提示
+	echo -----------------------------------------------
+	echo -e "\033[32m管理脚本更新成功!\033[0m"
+	echo -----------------------------------------------
+	exit;
+else
+update
+fi
+}
+getcore(){
+source $ccfg
+#获取核心及版本信息
+if [ ! -f $clashdir/clash ]; then
+	clashcore=没有安装核心！
+	clashv=''
+fi
+clashcore_n=$clashcore
+#获取设备处理器架构
+cpucore=$(uname -ms | tr ' ' '_' | tr '[A-Z]' '[a-z]')
+[ -n "$(echo $cpucore | grep -E "linux.*armv.*")" ] && cpucore="armv5"
+[ -n "$(echo $cpucore | grep -E "linux.*aarch64.*")" ] && cpucore="armv8"
+[ -n "$(echo $cpucore | grep -E "linux.*armv8.*")" ] && cpucore="armv8"
+[ -n "$(echo $cpucore | grep -E "linux.*armv7.*")" ] && cpucore="armv7"
+[ -n "$(echo $cpucore | grep -E "linux.*mips.*")" ] && cpucore="mipsle-softfloat"
+[ -n "$(echo $cpucore | grep -E "linux.*x86.*")" ] && cpucore="386"
+[ -n "$(echo $cpucore | grep -E "linux.*amd64.*")" ] && cpucore="amd64"
+[ -n "$(echo $cpucore | grep -E "linux.*x86_64.*")" ] && cpucore="amd64"
+###
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "当前clash核心：\033[47;30m $clashcore \033[46;30m$clashv\033[0m"
+echo -e "\033[32m请选择需要下载的核心版本！\033[0m"
+echo -----------------------------------------------
+echo "1 clash：     稳定，内存占用小，推荐！"
+echo "(官方正式版)  不支持chacha20加密，不支持Tun模式"
+echo
+echo "2 clashr：    内存占用小，支持chacha20加密"
+echo "(clashR修改版)不支持Tun模式"
+echo
+echo "3 clashpre：  支持Tun模式"
+echo "(高级预览版)  内存占用高，不支持chacha20加密"
+echo -----------------------------------------------
+echo 0 返回上级菜单 
+read -p "请输入对应数字 > " num
+	if [ -z $num ]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		update
+	elif [[ $num == 0 ]]; then
+		update
+	elif [[ $num == 1 ]]; then
+		clashcore=clash
+	elif [[ $num == 2 ]]; then
+		clashcore=clashr
+	elif [[ $num == 3 ]]; then
+		clashcore=clashpre
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		update
+	fi
+#生成链接
+corelink="$update_url/bin/$clashcore/clash-linux-$cpucore"
+versionlink="$update_url/bin/$clashcore/version"
+#检测版本
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[33m正在检查更新！\033[0m"
+result=$(curl -w %{http_code} -skLo /tmp/clashversion $versionlink)
+[ "$result" != "200" ] && echo "检查更新失败！" && exit 1
+source /tmp/clashversion
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "当前clash核心：\033[0m $clashcore_n \033[33m$clashv\033[0m"
+echo -e "最新clash核心：\033[32m $clashcore \033[36m$version\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+read -p "是否更新？[1/0] > " res
+if [ "$res" = '1' ]; then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo 正在连接服务器获取clash核心文件…………链接地址为：
+	echo -e "\033[4;32m$corelink\033[0m"
+	echo 如无法正常下载可以手动复制到浏览器下载核心文件！
+	echo -e "\033[36m~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
+	echo -e "|                                             |"
+	echo -e "|         需要一点时间，请耐心等待！          |"
+	echo -e "|       \033[0m如长时间没有数据请用ctrl+c退出        |"
+	echo -e "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\033[0m"
+	#获取在线clash核心文件
+	result=$(curl -w %{http_code} -kLo /tmp/clash.new $corelink)
+	if [ "$result" != "200" ];then
+		echo -----------------------------------------------
+		echo -e "\033[31m核心文件下载失败！\033[0m"
+		echo -----------------------------------------------
+		getcore
+	else
+		echo -e "\033[32m$clashcore核心下载成功，正在替换！\033[0m"
+		mv /tmp/clash.new $clashdir/clash
+		chmod  777 $clashdir/clash  #授予权限
+		sed -i '/clashcore=*/'d $ccfg
+		sed -i "1i\clashcore=$clashcore" $ccfg
+		sed -i '/clashv=*/'d $ccfg
+		sed -i "1i\clashv=$version" $ccfg
+		rm -rf /tmp/clashversion
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[32m$clashcore核心替换成功，请手动启动clash服务！\033[0m"
+		clashsh
+	fi	
+else
+getcore
+fi			
+}
+getgeo(){
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[33m正在检查更新！\033[0m"
+echo $update_url
+result=$(curl -w %{http_code} -skLo /tmp/clashversion $update_url/bin/version)
+[ "$result" != "200" ] && echo "检查更新失败！" && exit 1
+source /tmp/clashversion
+echo -----------------------------------------------
+echo -e "当前GeoIP版本为：\033[33m $Geo_v \033[0m"
+echo -e "最新GeoIP版本为：\033[32m $GeoIP_v \033[0m"
+echo -----------------------------------------------
+read -p "是否更新数据库文件？[1/0] > " res
+if [ "$res" = '1' ]; then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo 正在从服务器获取数据库文件…………
+	result=$(curl -w %{http_code} -kLo /tmp/Country.mmdb $update_url/bin/Country.mmdb)
+	if [ "$result" != "200" ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m文件下载失败！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		getgeo
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[32mGeoIP数据库文件下载成功！\033[0m"
+		mv /tmp/Country.mmdb $clashdir/Country.mmdb
+		sed -i '/Geo_v=*/'d $ccfg
+		sed -i "1i\Geo_v=$GeoIP_v" $ccfg
+		rm -rf /tmp/clashversion
+		clashsh
+	fi
+else
+clashsh
+fi
+}
+getdb(){
+#host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[36m安装本地版dashboard管理面板\033[0m"
+echo -----------------------------------------------
+echo -e "\033[32m打开管理面板的速度更快且更稳定"
+echo -e "\033[33m需要占用约500kb的本地空间\033[0m"
+echo -----------------------------------------------
+echo " 1 在/www/clash目录安装(http://$host/clash，可能安装失败！)"
+echo " 2 在$clashdir/ui目录安装(http://$host:9999/ui，安装后需重启clash)"
+echo -----------------------------------------------
+echo " 0 返回上级菜单"
+read -p "请输入对应数字 > " num
+
+if [ -z "$num" ];then
+	update
+elif [ "$num" = '1' ]; then
+	dbdir=/www/clash
+	hostdir='/clash\033[0;36m访问面板'
+elif [ "$num" = '2' ]; then
+	dbdir=$clashdir/ui
+	hostdir=':9999/ui\033[0;36m访问面板(需重启clash服务！)'
+else
+	update
+fi
+	#下载及安装
+	if [ -d /www/clash -o -d $clashdir/ui ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m检测到您已经安装过本地面板了！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		read -p "是否覆盖安装？[1/0] > " res
+		if [ -z "$res" ]; then
+			update
+		elif [ "$res" = 1 ]; then
+			rm -rf /www/clash
+			rm -rf $clashdir/ui
+		else
+			update
+		fi
+	fi
+	dblink="$update_url/bin/clashdb.tar.gz"
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo 正在连接服务器获取安装文件…………
+	result=$(curl -w %{http_code} -kLo /tmp/clashdb.tar.gz $dblink)
+	if [ "$result" != "200" ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m文件下载失败！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		getdb
+	else
+		echo -e "\033[33m下载成功，正在解压文件！\033[0m"
+		mkdir -p $dbdir > /dev/null
+		tar -zxvf '/tmp/clashdb.tar.gz' -C $dbdir > /dev/null
+		[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+		#修改默认host和端口
+		sed -i "s/127.0.0.1/$host/g" $dbdir/js/*.js
+		sed -i "s/9090/9999/g" $dbdir/js/*.js
+		#
+		echo -e "\033[32m面板安装成功！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[36m请使用\033[32;4mhttp://$host$hostdir\033[0m"
+		rm -rf /tmp/clashdb.tar.gz
+		update
+	fi
+	
+update
+}
+catpac(){
+#检测目录
+[ ! -d /www/clash -a ! -d $clashdir/ui ]&&echo 未检测到本地Dashboard面板，请先安装面板！&&sleep 1&&getdb
+#host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
+[ -d /www/clash ]&&dir="/www/clash"&&pac=http://$host/clash/pac
+[ -d $clashdir/ui ]&&dir="$clashdir/ui"&&pac=http://$host:9999/ui/pac
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;47m生成用于设备WIFI或浏览器的自动PAC代理文件\033[0m"
+echo -e "\033[33m非纯净模式不推荐使用此功能\033[0m"
+[ -f $dir/pac ]&&echo -e "PAC地址：\033[32m$pac\033[0m"
+echo -----------------------------------------------
+echo -e " 1 生成PAC文件"
+echo -e " 2 清除PAC文件"
+echo -----------------------------------------------
+echo -e " 0 返回上级菜单"
+read -p "请输入对应数字 > " num
+	if [ "$num" = '1' ]; then
+		echo 'function FindProxyForURL(url, host) {' > $dir/pac
+		echo "    return \"SOCKS $host:7890; PROXY $host:7890; DIRECT;\"" >> $dir/pac
+		echo '}' >> $dir/pac
+		echo -e "\033[33mPAC文件已生成！\033[0m"
+		echo -e "PAC地址：\033[32m$pac\033[0m"
+		echo "使用教程：https://baike.baidu.com/item/PAC/16292100"
+		sleep 2
+	elif [[ $num == 2 ]]; then
+		rm -rf $dir/pac
+		echo -----------------------------------------------
+		echo -e "\033[33mPAC文件已清除！\033[0m"
+		sleep 1
+	fi
+}
+setserver(){
+
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;47m您可以在此处切换在线更新时使用的资源地址\033[0m"
+echo -e "当前源：\033[4;32m$update_url\033[0m"
+echo -----------------------------------------------
+echo -e " 1 Github源(使用host指定IP)"
+echo -e " 2 CDN源(版本同步较慢)"
+echo -e " 3 Github源+clash代理(需开启clash服务)"
+echo -e " 4 自定义输入(请务必确保路径正确)"
+echo -e " 0 返回上级菜单"
+read -p "请输入对应数字 > " num
+if	[ -z $num ]; then 
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	update
+elif [[ $num == 1 ]]; then
+	update_url='--resolve raw.githubusercontent.com:443:199.232.68.133 https://raw.githubusercontent.com/juewuy/ShellClash/master'
+elif [[ $num == 2 ]]; then
+	update_url='https://cdn.jsdelivr.net/gh/juewuy/ShellClash' 
+elif [[ $num == 3 ]]; then
+	update_url='-x 127.0.0.1:7890 https://raw.githubusercontent.com/juewuy/ShellClash/master'
+elif [[ $num == 4 ]]; then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	read -p "请输入个人源路径 > " update_url
+	if [ -n $update_url ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m取消输入，返回上级菜单\033[0m"
+		update
+	fi
+elif [[ $num == 9 ]]; then
+	update_url='http://127.0.0.1:8080/clash-for-Miwifi'
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	update
+fi
+#写入mark文件
+sed -i '/update_url*/'d $ccfg
+sed -i "1i\update_url=\'$update_url\'" $ccfg
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[32m源地址更新成功！\033[0m"
+update
+}

scripts/start.sh

@@ -0,0 +1,353 @@
+#!/bin/sh
+# Copyright (C) Juewuy
+
+getconfig(){
+#加载环境变量
+[ -z "$clashdir" ] && source /etc/profile > /dev/null 2>&1
+ccfg=$clashdir/mark
+if [ ! -f "$ccfg" ]; then
+	echo mark文件不存在，默认以Redir模式运行！
+cat >$ccfg<<EOF
+#标识clash运行状态的文件，不明勿动！
+EOF
+	#指定一些默认状态
+	redir_mod=redir模式
+	modify_yaml=未开启
+fi
+source $ccfg #加载配置文件
+#是否代理常用端口
+[ "$common_ports" = "已开启" ] && ports='-m multiport --dports 22,53,587,465,995,993,143,80,443 '
+#检测系统端口占用
+for portx in 1053 7890 7892 9999 ;do
+	[ -n "$(netstat -ntulp |grep :$portx|grep -v clash)" ] && echo -e "检测到端口：\033[30;47m $portx \033[0m被以下进程占用！clash无法启动！" && echo $(netstat -ntulp |grep :$portx) && exit;
+done
+}
+getyaml(){
+#前后端订阅服务器地址索引，可在此处添加！
+Server=`sed -n ""$server_link"p"<<EOF
+subconverter-web.now.sh
+subconverter.herokuapp.com
+subcon.py6.pw
+api.dler.io
+api.wcc.best
+skapi.cool
+EOF`
+Config=`sed -n ""$rule_link"p"<<EOF
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_MultiMode.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_AdblockPlus.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_AdblockPlus.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_NoReject.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_NoAuto.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_NoAuto.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Full_Netflix.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Full_AdblockPlus.ini
+EOF`
+#如果传来的是Url链接则合成Https链接，否则直接使用Https链接
+if [ -z $Https ];then
+	#echo $Url
+	Https="https://$Server/sub?target=clashr&insert=true&new_name=true&scv=true&exclude=$exclude&url=$Url&config=$Config"
+	markhttp=1
+fi
+#
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 正在连接服务器获取配置文件…………链接地址为：
+echo -e "\033[4;32m$Https\033[0m"
+echo 可以手动复制该链接到浏览器打开并查看数据是否正常！
+echo -e "\033[36m~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
+echo -e "|                                             |"
+echo -e "|         需要一点时间，请耐心等待！          |"
+echo -e "|       \033[0m如长时间没有数据请用ctrl+c退出\033[36m        |"
+echo -e "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\033[0m"
+#获取在线yaml文件
+yaml=$clashdir/config.yaml
+yamlnew=/tmp/config.yaml
+rm -rf $yamlnew > /dev/null 2>&1
+result=$(curl -w %{http_code} -kLo $yamlnew $Https)
+if [ "$result" != "200" ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m配置文件获取失败！\033[0m"
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo
+	if [ -z $markhttp ];then
+		echo 请尝试使用导入节点/链接功能！
+		getlink
+		
+	else
+		read -p "是否更换后端地址后重试？[1/0] > " res
+		if [ "$res" = '1' ]; then
+			sed -i '/server_link=*/'d $ccfg
+			if [[ $server_link -ge 6 ]]; then
+				server_link=0
+			fi
+			server_link=$(($server_link + 1))
+			echo $server_link
+			sed -i "1i\server_link=$server_link" $ccfg
+			Https=""
+			getyaml
+		fi
+		#exit;
+	fi
+else
+	Https=""
+	if cat $yamlnew | grep ', server:' >/dev/null;then
+		#检测旧格式
+		if cat $yamlnew | grep 'Proxy Group:' >/dev/null;then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m已经停止对旧格式配置文件的支持！！！\033[0m"
+			echo -e "请使用新格式或者使用\033[32m导入节点/订阅\033[0m功能！"
+			sleep 2
+			clashlink
+		fi
+		#检测不支持的加密协议
+		if cat $yamlnew | grep 'cipher: chacha20,' >/dev/null;then
+			if [ "$clashcore" = "clash" -o "$clashcore" = "clashpre" ];then
+				echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+				echo -e "\033[31m当前核心：$clashcore不支持chacha20加密！！！\033[0m"
+				echo -e "请更换使用clashR核心！！！"
+				sleep 2
+				getcore
+			fi
+		fi
+		#替换文件
+		[ -f $yaml ] && mv $yaml $yaml.bak
+		mv $yamlnew $yaml
+		echo 配置文件已生成！正在启动clash使其生效！
+		#重启clash服务
+		$0 stop
+		start_over(){
+			echo -e "\033[32mclash服务已启动！\033[0m"
+			echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
+			echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m 9999 \033[0m"
+			echo -e "也可前往更新菜单安装本地Dashboard面板，连接更稳定！\033[0m"
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		}
+		$0 start
+		sleep 1
+		PID=$(pidof clash)
+		if [ -n "$PID" ];then
+			start_over
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			if [ -f $yaml.bak ];then
+				echo -e "\033[31mclash服务启动失败！已还原配置文件并重启clash！\033[0m"
+				mv $yaml.bak $yaml
+				$0 start
+				sleep 1
+			else
+				echo -e "\033[31mclash服务启动失败！请查看报错信息！\033[0m"
+				$clashdir/clash -d $clashdir & { sleep 3 ; kill $! & }
+				exit;
+			fi
+		fi
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m获取到了配置文件，但格式似乎不对！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		sed -n '1,30p' $yamlnew
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m请检查如上配置文件信息:\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	fi
+	#exit;
+fi
+#exit
+}
+modify_yaml(){
+##########需要变更的配置###########
+mix='mixed-port: 7890'
+redir='redir-port: 7892'
+lan='allow-lan: true'
+mode='mode: Rule'
+log='log-level: info'
+if [ "$ipv6_support" = "已开启" ];then
+ipv6='ipv6: true'
+else
+ipv6='ipv6: false'
+fi
+external='external-controller: 0.0.0.0:9999'
+if [ -d $clashdir/ui ];then
+external_ui='external-ui: ui'
+else
+external_ui='external-ui:'
+fi
+if [ "$dns_mod" = "fake-ip" ];then
+dns='dns: {enable: true, listen: 0.0.0.0:1053, fake-ip-range: 198.18.0.1/16, enhanced-mode: fake-ip, nameserver: [114.114.114.114, 127.0.0.1:53], fallback: [tcp://1.0.0.1, 8.8.4.4]}'
+elif [ "$dns_over" = "已开启" ];then
+dns='dns: {enable: true, ipv6: true, listen: 0.0.0.0:1053, enhanced-mode: redir-host, nameserver: [114.114.114.114, 223.5.5.5], fallback: [1.0.0.1, 8.8.4.4]}'
+else
+dns='dns: {enable: true, ipv6: true, listen: 0.0.0.0:1053, enhanced-mode: redir-host, nameserver: [114.114.114.114, 223.5.5.5, 127.0.0.1:53], fallback: [1.0.0.1, 8.8.4.4]}'
+fi
+if [ "$redir_mod" != "Redir模式" ];then
+tun='tun: {enable: true, stack: system}'
+else
+tun='tun: {enable: false}'
+fi 
+exper='experimental: {ignore-resolve-fail: true, interface-name: en0}'
+###################################
+	#预删除需要添加的项目
+	i=$(grep  -n  "^proxies:" $clashdir/config.yaml | head -1 | cut -d ":" -f 1)
+	i=$(($i-1))
+	sed -i '1,'$i'd' $clashdir/config.yaml
+	#添加配置
+	sed -i "1i$mix" $clashdir/config.yaml
+	sed -i "1a$redir" $clashdir/config.yaml
+	sed -i "2a$lan" $clashdir/config.yaml
+	sed -i "3a$mode" $clashdir/config.yaml
+	sed -i "4a$log" $clashdir/config.yaml
+	sed -i "5a$ipv6" $clashdir/config.yaml
+	sed -i "6a$external" $clashdir/config.yaml
+	sed -i "7a$external_ui" $clashdir/config.yaml
+	sed -i "8a$dns" $clashdir/config.yaml
+	sed -i "9a$tun" $clashdir/config.yaml
+	sed -i "10a$exper" $clashdir/config.yaml
+	#跳过本地tls证书验证
+	if [ "$skip_cert" = "已开启" ];then
+	sed -i '10,99s/skip-cert-verify: false/skip-cert-verify: true/' $clashdir/config.yaml
+	else
+	sed -i '10,99s/skip-cert-verify: true/skip-cert-verify: false/' $clashdir/config.yaml
+	fi
+}
+mark_time(){
+	start_time=`date +%s`
+	sed -i '/start_time*/'d $clashdir/mark
+	sed -i "1i\start_time=$start_time" $clashdir/mark
+}
+start_redir(){
+	#流量过滤规则
+	iptables -t nat -N clash
+	iptables -t nat -A clash -d 0.0.0.0/8 -j RETURN
+	iptables -t nat -A clash -d 10.0.0.0/8 -j RETURN
+	iptables -t nat -A clash -d 127.0.0.0/8 -j RETURN
+	iptables -t nat -A clash -d 169.254.0.0/16 -j RETURN
+	iptables -t nat -A clash -d 172.16.0.0/12 -j RETURN
+	iptables -t nat -A clash -d 192.168.0.0/16 -j RETURN
+	iptables -t nat -A clash -d 224.0.0.0/4 -j RETURN
+	iptables -t nat -A clash -d 240.0.0.0/4 -j RETURN
+	for mac in $(cat $clashdir/mac); do
+		iptables -t nat -A clash -m mac --mac-source $mac -j RETURN
+	done
+	#设置防火墙流量转发
+	iptables -t nat -A clash -p tcp $ports-j REDIRECT --to-ports 7892
+	iptables -t nat -A PREROUTING -p tcp -j clash
+	#设置ipv6转发
+	if [ "$ipv6_support" = "已开启" ];then
+		ip6tables -t nat -N clash
+		for mac in $(cat $clashdir/mac); do
+			ip6tables -t nat -A clash -m mac --mac-source $mac -j RETURN
+		done
+		ip6tables -t nat -A clash -p tcp $ports-j REDIRECT --to-ports 7892
+		ip6tables -t nat -A PREROUTING -p tcp -j clash
+	fi
+}
+stop_iptables(){
+    #重置iptables规则
+	iptables -t nat -D PREROUTING -p tcp -j clash > /dev/null 2>&1
+	iptables -t nat -D PREROUTING -p udp -j clash_dns > /dev/null 2>&1
+	iptables -t nat -F clash > /dev/null 2>&1
+	iptables -t nat -X clash > /dev/null 2>&1
+	iptables -t nat -F clash_dns > /dev/null 2>&1
+	iptables -t nat -X clash_dns > /dev/null 2>&1
+	#重置ipv6规则
+	ip6tables -t nat -D PREROUTING -p tcp -j clash > /dev/null 2>&1
+	ip6tables -t nat -D PREROUTING -p udp -j clash_dns > /dev/null 2>&1
+	ip6tables -t nat -F clash > /dev/null 2>&1
+	ip6tables -t nat -X clash > /dev/null 2>&1
+	ip6tables -t nat -F clash_dns > /dev/null 2>&1
+	ip6tables -t nat -X clash_dns > /dev/null 2>&1
+}
+start_dns(){
+	#允许tun网卡接受流量
+	iptables -I FORWARD -o utun -j ACCEPT
+	ip6tables -I FORWARD -o utun -j ACCEPT > /dev/null 2>&1
+	#设置dns转发
+	iptables -t nat -N clash_dns
+	for mac in $(cat $clashdir/mac); do
+		iptables -t nat -A clash_dns -m mac --mac-source $mac -j RETURN
+	done
+	iptables -t nat -A clash_dns -p udp --dport 53 -j REDIRECT --to 1053
+	iptables -t nat -A PREROUTING -p udp -j clash_dns
+
+	#ipv6DNS
+	if [ "$ipv6_support" = "已开启" ];then
+		ip6tables -t nat -N clash_dns > /dev/null 2>&1
+		for mac in $(cat $clashdir/mac); do
+			ip6tables -t nat -A clash_dns -m mac --mac-source $mac -j RETURN > /dev/null 2>&1
+		done
+		ip6tables -t nat -A clash_dns -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
+		ip6tables -t nat -A PREROUTING -p udp -j clash_dns > /dev/null 2>&1
+	fi
+}
+daemon_old(){
+	#守护进程状态
+	PID=$(pidof clash)
+	if [ -z "$PID" ];then
+	$clashdir/clash -d $clashdir > /dev/null &
+	mark_time
+	fi
+}
+checkcron(){
+	[ -d /etc/crontabs/ ]&&cronpath="/etc/crontabs/root"
+	[ -d /var/spool/cron/ ]&&cronpath="/var/spool/cron/root"
+	[ -d /var/spool/cron/crontabs/ ]&&cronpath="/var/spool/cron/crontabs/root"
+	if [ -z $cronpath ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo "找不到定时任务文件,无法添加定时任务！"
+		clashsh
+	fi
+}
+afstart(){
+	#读取配置文件
+	getconfig
+	#修改iptables规则使流量进入clash
+	stop_iptables
+	[ "$redir_mod" != "纯净模式" ] && start_dns
+	[ "$redir_mod" != "纯净模式" ] && [ "$redir_mod" != "Tun模式" ] && start_redir
+	#标记启动时间
+	mark_time
+}
+
+case "$1" in
+
+afstart)
+		afstart
+	;;
+start)		
+		#读取配置文件
+		getconfig
+		#使用内置规则强行覆盖config配置文件
+		[ "$modify_yaml" != "已开启" ] && modify_yaml
+		#使用不同方式启动clash服务
+		if [ "$start_old" = "已开启" ];then
+			$clashdir/clash -d $clashdir >/dev/null 2>&1 &
+			afstart
+		elif [ -f /etc/rc.common ];then
+			/etc/init.d/clash start
+		else
+			systemctl start clash.service
+		fi
+	;;
+stop)	
+		#删除守护
+		checkcron
+		sed -i /start.sh/d $cronpath >/dev/null 2>&1
+		#多种方式结束进程
+		if [ -f /etc/rc.common ];then
+			/etc/init.d/clash stop >/dev/null 2>&1
+		else
+			systemctl stop clash.service >/dev/null 2>&1
+		fi
+		killall -9 clash >/dev/null 2>&1
+		#清理iptables
+		stop_iptables
+        ;;
+restart)
+        $0 stop
+        $0 start
+        ;;
+getyaml)	
+		getconfig
+		getyaml
+		;;
+esac
+exit 0