尝试修复CDN同步失败的bug

xf

README.md

@@ -1,84 +1,73 @@
 # clash-for-Miwifi
 在小米AX3600/AX1800/AX5等路由器上使用clash做透明代理
 =====
+
+功能简介：
+--
+~支持小米AX系列路由器设备使用clash做透明代理，更多的设备支持可以前往TG群报名参与测试<br>
+~支持SS、SSR、v2ray、trojan、sock5等协议<br>
+~支持批量导入节点链接及订阅链接<br>
+~支持使用网页面板管理规则组<br>
+~支持多种模式切换，支持在线更新<br>
+~支持部署内置的管理面板<br>
+~更多功能可在使用中发掘<br>
+
 更新日志：
 --
-
-•旧版本请重新下载[目录中除config.yaml和Country.mmdb以外的3个文件](https://github.com/juewuy/clash-for-Miwifi/tree/master/clash)上传到etc/clash后，并重新使用安装命令安装以完成更新<br>
-
-#### v0.2
-•合并Tun和Redir模式为一套文件，可以通过管理脚本直接切换<br>
-•同步官方最新premium版核心，全面支持ssr<br>
-•大幅度优化管理脚本，增加部分实用功能<br>
-
-#### v0.1
-•支持redir模式<br>
-•增加了一个简单的管理脚本<br>
-•支持ss、v2ray以及trojan协议，Redir模式额外支持ssr协议<br>
-
-#### 更早的版本
-•支持Tun模式<br>
-•支持ss、v2ray以及trojan协议<br>
+* v0.8.7<br>
+~修复了脚本更新路径不正确的bug<br>
+~调整了geoip数据库下载源地址<br>
+~增加了自定义源输入检测<br>
+* v0.8.6<br>
+~新增CDN下载源和Github下载源，下载更新速度更快<br>
+~新增了切换下载源的选项菜单<br>
+~界面UI优化及bug修复<br>
+* v0.8.5<br>
+~新增了Tun/Redir混合模式<br>
+~新增是否支持ipv6的开关<br>
+~新增了更新核心时的版本检测<br>
+~新增了本地面板重复安装提示<br>
+~修复了部分报错提示<br>
+~修复了部分设定未及时更新的bug<br>
+* v0.8.4<br>
+~更新在线下载GeoIP数据库功能<br>
+~更新在线下载及部署Dashboard面板功能<br>
+~UI小幅度优化<br>
 
 使用依赖：
 --
-•请确认路由器或设备已经开启SSH并获取root权限，小米AX系列可参考：https://www.right.com.cn/forum/thread-4032490-1-1.html 开启<br>
-•SSH连接工具，例如putty，bitvise，JuiceSSH（支持安卓手机）等，请自行安装使用<br>
-•SCP连接工具，如winscp（内置了putty，只安装这一个其实就可以）<br>
+~路由器或设备已经开启SSH并获取root权限<br>
+~SSH连接工具，例如putty，bitvise，JuiceSSH（支持安卓手机）等<br>
 
-使用方式：
+一键安装：
 --
-•下载 [目录中全部5个文件](https://github.com/juewuy/clash-for-Miwifi/tree/master/clash)到本地电脑 <br>
-•**根据自己需求参考文件内的注释，修改config.yaml配置文件并保存`重要！！！`**<br>
-•推荐使用notepad++打开yaml文件，如果只添加单个服务器可以直接在原示例上修改即可，多余的示例服务器不用删除<br>
-•可以使用 https://clash.skk.moe/proxy 生成单个节点配置；使用 https://acl4ssr.netlify.app 生成订阅或链接的节点配置<br>
-*·如有必要，也可以自行前往下载更新clash核心文件并自行改名<br>*
-•将下载并修改后的5个文件通过winSCP上传到路由器/etc/clash文件夹（clash文件夹请自行创建）下（最终应该是/etc/clash/"5个文件"）<br>
-•登陆SSH，并在SSH中用root用户执行下方的**对应命令**即可使用！<br>
-
-**首次安装**
 ```Shell
-mv /etc/clash/clashservice /etc/init.d/clash #移动clash服务文件
-mv /etc/clash/clashsh /bin/clash             #移动clash管理脚本
-chmod  777 /etc/clash/clash                  #授予权限
-chmod  777 /etc/init.d/clash                 #授予权限
-chmod  777 /bin/clash                        #授予权限
-clash                                        #使用管理脚本
+sh -c "$(curl -kfsSl https://juewuy.xyz/clash/install.sh)" && source /etc/profile &> /dev/null
 ```
-**管理脚本**
-```Shell 
-clash                                        #使用管理脚本
-```
-•启用后可以通过 http://clash.razord.top （或者 https://yacd.haishan.me ） （Host为网关IP，端口为9999，密钥为空）管理clash内置规则<br>
 
-故障解决：
+交流反馈：
 --
-•部分设备安装时提示bin目录只读（readonly）：可以通过输入mount -o remount rw /bin 来使目录临时可写，之后重新执行安装命令即可完成安装<br>
-•如果https://yacd.haishan.me 打不开：请尝试使用 http://clash.razord.top http://app.tossp.com  或者尝试清理浏览器缓存<br>
-•如果能正常连接国内网站而无法访问屏蔽网站：请在浏览器中打开 http://clash.razord.top 并使用测速功能，之后手动指定服务器即可；如果所有服务器都不可用即代表配置文件有问题<br>
-•全局模式无效：全局模式启用后请在管理面板手动勾选代理节点即可<br>
-•其他问题请前往我的tg群询问 https://t.me/clashfm <br>
+### https://t.me/clashfm 
 
 已知问题：
 --
-•由于使用了clash的fake-ip模式，故两种模式均不支持ipv6<br>
-•Tun模式下clash服务可能会和小米路由器内置的tx网游加速器冲突，请谨慎同时使用<br>
-•Tun模式下部分软件不会经过clash，例如telegram，可以通过设置软件内置sock5（IP=路由IP，port=7891）或http代理（IP=路由IP，port=7890）解决<br>
-•Redir模式无法转发udp流量，外服游戏可能会受影响，此功能是由官方系统阉割了Tproxy导致，暂时无解，外服游戏用户建议使用Tun模式<br>
+~Tun模式下clash服务可能会和小米路由器内置的tx网游加速器冲突，请谨慎同时使用<br>
+~Redir模式无法转发udp流量，外服游戏可能会受影响，此功能是由官方系统阉割了Tproxy导致，暂时无解，外服游戏用户建议使用Tun模式<br>
 
 ToDo：
 --
-•管理脚本增加订阅功能<br>
-•管理脚本增加更新功能<br>
-•添加一键安装脚本<br>
-•修复redir-host DNS以及IPV6支持<br>
-•……<br>
-
+~~增加订阅功能~~<br>
+~~添加一键安装脚本~~<br>
+~~增加屏蔽P2P流量功能~~<br>
+~~增加更新功能~~<br>
+~~修复redir-host DNS以及IPV6支持~~<br>
+~增加定时功能<br>
 
 感谢：
 --
-•https://lancellc.gitbook.io/clash/start-clash/clash-tun-mode<br>
-•https://comzyh.gitbook.io/clash/<br>
-•https://h-cheung.gitlab.io/post/使用_clash_和路由表实现透明代理<br>
-•https://www.right.com.cn/forum/thread-4042741-1-1.html<br>
+~https://lancellc.gitbook.io/clash/start-clash/clash-tun-mode<br>
+~https://comzyh.gitbook.io/clash/<br>
+~https://h-cheung.gitlab.io/post/使用_clash_和路由表实现透明代理<br>
+~https://www.right.com.cn/forum/thread-4042741-1-1.html<br>
+
 

bin/clash/version

@@ -0,0 +1 @@
+version=1.0.0

bin/clashpre/version

@@ -0,0 +1 @@
+version=1.0.0

bin/clashr/version

@@ -0,0 +1 @@
+version=1.0.0

bin/config.yaml

@@ -106,8 +106,6 @@ proxy-groups:
 # 规则
 rules:
 # Unbreak
-#clash面板
-- DOMAIN,clash.razord.top,DIRECT
 # > Google
 - DOMAIN-SUFFIX,googletraveladservices.com,DIRECT
 - DOMAIN,dl.google.com,DIRECT

bin/version

@@ -0,0 +1 @@
+versionsh=0.8.7

clash/clashservice

@@ -1,64 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Example script
-# Copyright (C) 2007 OpenWrt.org
-
-USE_PROCD=1
-START=99
-start_redir(){
-	#修改iptables规则使流量进入clash
-	iptables -t nat -N clash
-	iptables -t nat -A clash -d 0.0.0.0/8 -j RETURN
-	iptables -t nat -A clash -d 10.0.0.0/8 -j RETURN
-	iptables -t nat -A clash -d 127.0.0.0/8 -j RETURN
-	iptables -t nat -A clash -d 169.254.0.0/16 -j RETURN
-	iptables -t nat -A clash -d 172.16.0.0/12 -j RETURN
-	iptables -t nat -A clash -d 192.168.0.0/16 -j RETURN
-	iptables -t nat -A clash -d 224.0.0.0/4 -j RETURN
-	iptables -t nat -A clash -d 240.0.0.0/4 -j RETURN
-	iptables -t nat -A clash -p tcp -j REDIRECT --to-ports 7892
-	iptables -t nat -A PREROUTING -p tcp -j clash
-	iptables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to 1053
-}
-stop_redir(){
-    #重置iptables规则
-	iptables -t nat -D PREROUTING -p tcp -j clash > /dev/null 2>&1
-	iptables -t nat -F clash > /dev/null 2>&1
-	iptables -t nat -X clash > /dev/null 2>&1
-	iptables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
-}
-start_tun(){
-	#修改iptables规则使流量进入clash
-	iptables -I FORWARD -o utun -j ACCEPT
-	iptables -t nat -I PREROUTING -p udp --dport 53 -j REDIRECT --to 1053
-}
-stop_tun(){
-	iptables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
-}
-start_service() {
-    #创建clash后台进程
-	procd_open_instance
-	procd_set_param respawn
-	procd_set_param stderr 1
-	procd_set_param stdout 1
-	procd_set_param command /etc/clash/clash -d /etc/clash
-	procd_close_instance
-	#修改iptables规则使流量进入clash
-	Mod=`cat /bin/clash | grep 'Mark3=' -m1`
-	result=$(echo $Mod | grep "Tun模式")
-	if [[ "$result" != "" ]];then
-		stop_tun
-		start_tun
-	else
-		stop_redir
-		start_redir
-	fi
-}
-stop_service() {
-	Mod=`cat /bin/clash | grep 'Mark3=' -m1`
-	result=$(echo $Mod | grep "Tun模式")
-	if [[ "$result" != "" ]];then
-		stop_tun
-	else
-		stop_redir
-	fi
-}

clash/clashsh

@@ -1,224 +0,0 @@
-#!/bin/sh
-# Copyright (C) Juewuy
-
-echo "***********************************************"
-echo "**                 欢迎使用                  **"
-echo "**             Clash for Miwifi              **"
-echo "**                             by  Juewuy    **"
-echo "***********************************************"
-Mark1=""
-Mark2="\033[31m未设置开机启动！\033[0m"
-Mark3="Tun模式"
-
-clashlink(){
-echo 施工中，敬请期待！
-clashsh
-} 
-clashadv(){
-echo -----------------------------------------------
-echo -e "\033[33m欢迎使用高级模式菜单：\033[0m"
-echo 1 切换代理模式（Tun/Redir）
-echo 2 更新clash核心文件（施工中）
-echo 3 更新GeoIP数据库（施工中）
-echo 4 更新管理脚本（施工中）
-echo 9 卸载clash
-echo 0 返回上级菜单 
-read -p "请输入对应数字 > " num
-if [[ $num -le 9 ]] > /dev/null 2>&1; then 
-  if [[ $num == 0 ]]; then
-    clashsh
-  
-  elif [[ $num == 1 ]]; then
-    echo -----------------------------------------------
-    echo -e "当前代理模式为：\033[47;30m $Mark3 \033[0m"
-	echo -e "\033[33m切换模式时会重启clash服务，可能会导致短时间的网络中断！\033[0m"
-	echo "1 Tun模式：  支持UDP转发且延迟低"
-	echo "             但CPU及内存占用更高"
-	echo "             适合外服游戏用户"
-	echo "2 Redir模式：CPU以及内存占用较低"
-	echo "             但不支持UDP流量转发"
-	echo "             日常使用推荐此模式"
-	echo 0 返回上级菜单 
-	read -p "请输入对应数字 > " num
-	if [[ $num == 0 ]]; then
-	  clashadv
-	elif [[ $num == 1 ]]; then
-	  if [[ $Mark3 = "Redir模式" ]]; then
-		sed -i '1,20s/Redir模式/Tun模式/' /bin/clash		#修改Mark3标记
-	    sed -i '1,40s/tun: {enable: false/tun: {enable: true/' /etc/clash/config.yaml		#修改配置文件
-		if [ $Number1 -gt 0 ];then
-		echo -----------------------------------------------
-		echo -e "\033[33m正在重启clash进程……\033[0m"
-		/etc/init.d/clash stop > /dev/null 2>&1
-		fi	  
-		/etc/init.d/clash start
-		Number2=`ps |grep -w /etc/clash/clash|grep -v grep|wc -l`	  
-		if [ $Number2 -gt 0 ];then
-		echo -----------------------------------------------
-		echo -e "\033[32mclash服务已启动！\033[0m"
-		echo -e "\033[33mclash已成功切换为：\033[47;34m Tun模式! \033[0m"
-		echo -e 可以使用 "\033[32mhttp://clash.razord.top\033[0m"（IP为网关IP，端口为9999）管理clash内置规则
-		Mark3="Tun模式"
-		clashsh
-		else
-		echo -----------------------------------------------
-		echo -e "\033[31mclash服务启动失败！请检查配置文件！\033[0m"
-		clashsh
-		fi  
-	  else
-	    echo -----------------------------------------------
-		echo -e "\033[33m当前已经处于Tun模式，无需重复设置！\033[0m"
-		clashadv
-	  fi
-	  
-	elif [[ $num == 2 ]]; then
-	  if [[ $Mark3 = "Tun模式" ]]; then
-		sed -i '1,20s/Tun模式/Redir模式/' /bin/clash		#修改Mark3标记
-	  	sed -i '1,40s/tun: {enable: true/tun: {enable: false/' /etc/clash/config.yaml		#修改配置文件
-		if [ $Number1 -gt 0 ];then
-		echo -----------------------------------------------
-		echo -e "\033[33m正在重启clash进程……\033[0m"
-		/etc/init.d/clash stop > /dev/null 2>&1
-		fi	  
-		/etc/init.d/clash start
-		Number2=`ps |grep -w /etc/clash/clash|grep -v grep|wc -l`	  
-		if [ $Number2 -gt 0 ];then
-		echo -----------------------------------------------
-		echo -e "\033[32mclash服务已启动！\033[0m"
-		echo -e "\033[33mclash已成功切换为：\033[47;34m Redir模式! \033[0m"
-		echo -e 可以使用 "\033[32mhttp://clash.razord.top\033[0m"（IP为网关IP，端口为9999）管理clash内置规则
-		Mark3="Redir模式"
-		clashsh
-		else
-		echo -----------------------------------------------
-		echo -e "\033[31mclash服务启动失败！请检查配置文件！\033[0m"
-		clashsh
-		fi  
-	  else
-	    echo -----------------------------------------------
-		echo -e "\033[33m当前已经处于Redir模式，无需重复设置！\033[0m"
-		clashadv
-	  fi
-	else
-	  echo -e "\033[31m请输入正确的数字！\033[0m"
-      clashadv
-	fi
-	
-  elif [[ $num == 9 ]]; then
-    read -p "确认卸载clash？（警告：该操作不可逆！）[1/0] " res
-	if [ "$res" = '1' ]; then
-    /etc/init.d/clash disable
-    /etc/init.d/clash stop
-    rm -rf /etc/clash
-    rm /etc/init.d/clash
-    rm /bin/clash
-    echo 已卸载clash相关文件！
-	fi
-    exit;
-  else
-    echo -e "\033[31m暂未支持的选项！\033[0m"
-    clashadv
-  fi
-else
-  echo -e "\033[31m请输入正确的数字！\033[0m"
-  clashsh
-fi
-exit;
-}
-clashsh(){
-Number1=`ps |grep -w /etc/clash/clash|grep -v grep|wc -l`
-if [ $Number1 -gt 0 ];then
-Mark1="\033[32m正在运行（$Mark3）\033[0m"
-else
-Mark1="\033[31m没有运行（$Mark3）\033[0m"
-fi
-echo -----------------------------------------------
-echo -e "Clash服务$Mark1,$Mark2"
-echo 1 启动/重启clash服务
-echo 2 测试代理服务器连通性
-echo 3 停止clash服务
-echo 4 允许clash开机启动
-echo 5 禁止clash开机启动
-echo 6 使用链接导入节点/订阅
-echo 7 高级设置
-echo 0 退出脚本
-read -p "请输入对应数字 > " num
-if [[ $num -le 7 ]] > /dev/null 2>&1; then 
-  if [[ $num == 0 ]]; then
-  exit;
-  
-  elif [[ $num == 1 ]]; then
-    if [ $Number1 -gt 0 ];then
-	echo -----------------------------------------------
-	/etc/init.d/clash stop > /dev/null 2>&1
-	echo -e "\033[31mClash服务已停止！\033[0m"
-	sleep 1
-	fi
-    /etc/init.d/clash start
-    Number2=`ps |grep -w /etc/clash/clash|grep -v grep|wc -l`
-      if [ $Number2 -gt 0 ];then
-	  echo -----------------------------------------------
-      echo -e "\033[32mclash服务已启动！\033[0m"
-	  echo 可以使用 http://clash.razord.top （IP为网关IP，端口为9999）管理clash内置规则
-	  clashsh
-      else
-	  echo -----------------------------------------------
-      echo -e "\033[31mclash服务启动失败！请检查配置文件！\033[0m"
-	  clashsh
-      fi
-	  exit;
-  
-  elif [[ $num == 2 ]]; then
-      echo 注意：连续多次测试可能会导致IP暂时被GitHub封禁！
-      delay=`curl -kx socks5://127.0.0.1:7891 -o /dev/null -s -w '%{time_total}' 'https://github.com' & { sleep 3 ; kill $! & }` > /dev/null 2>&1
-	  delay0=`expr length x$delay`
-	  #echo $delay
-	  if [ $delay0 == 1 ];then
-      echo ----------------------------------------------
-      echo '连接超时（>3s），请检查节点信息！'
-	  clashsh
-	  else
-	  echo -----------------------------------------------
-	  echo 连接成功！响应时间为：$delay秒
-	  clashsh
-	  fi
-
-  elif [[ $num == 3 ]]; then
-  /etc/init.d/clash stop > /dev/null 2>&1
-  echo -----------------------------------------------
-  echo -e "\033[31mClash服务已停止！\033[0m"
-  echo -----------------------------------------------
-  exit;
-
-  elif [[ $num == 4 ]]; then
-  /etc/init.d/clash enable
-  sed -i '1,20s/1m未/2m已/' /bin/clash
-  echo -----------------------------------------------
-  echo -e "\033[32m已设置Clash开机启动！\033[0m"
-  Mark2="\033[32m已设置开机启动！\033[0m"
-  clashsh
-
-  elif [[ $num == 5 ]]; then
-  /etc/init.d/clash disable
-  sed -i '1,20s/2m已/1m未/' /bin/clash
-  echo -----------------------------------------------
-  echo -e "\033[33m已禁止Clash开机启动！\033[0m"
-  Mark2="\033[31m未设置开机启动！\033[0m"
-  clashsh
-    
-  elif [[ $num == 6 ]]; then
-  clashlink
-
-  elif [[ $num == 7 ]]; then
-  clashadv
-  
-  else
-  echo -e "\033[31m请输入正确的数字！\033[0m"
-  fi
-  exit 1
-else
-echo -e "\033[31m请输入正确的数字！\033[0m"
-fi
-exit 1
-}
-clashsh

clash/test.ini

@@ -1 +0,0 @@
-test

install.sh

@@ -0,0 +1,87 @@
+ #!/bin/sh
+# Copyright (C) Juewuy
+
+echo "***********************************************"
+echo "**                 欢迎使用                  **"
+echo "**             Clash for Miwifi              **"
+echo "**                             by  Juewuy    **"
+echo "***********************************************"
+
+url="https://juewuy.xyz/clash/"
+result=$(curl -w %{http_code} -skLo /tmp/clashversion $url/bin/version)
+[ "$result" != "200" ] && echo "无法连接到服务器！" && exit 1
+source /tmp/clashversion
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "~~~~版本：\033[32m$versionsh\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[44m使用中如遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo -e "\033[37m目前仅支持小米AX系列3款路由器"
+echo -e "\033[44m其余型号可到TG群报名参与测试\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[32m 1 在默认目录(/etc)安装Clash for Miwifi"
+echo -e "\033[33m 2 手动设置安装目录（不明勿用！）"
+echo -e "\033[0m 0 退出安装"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+read -p "请输入相应数字 > " num
+
+if [ -z $num ];then
+	echo 安装已取消
+	exit;
+elif [[ $num == 1 ]];then
+	dir=/etc
+elif [[ $num == 2 ]];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo '可用路径 剩余空间:'
+	df -h | awk '{print $6,$2}'| sed 1d 
+	echo '路径是必须带 / 的格式，写入虚拟内存(/tmp,/sys,..)的文件会在重启后消失！！！'
+	read -p "请输入自定义路径 > " dir
+	if [ -z $dir ];then
+		echo 路径错误！已取消安装！
+		exit;
+	fi
+else
+	echo 安装已取消
+	exit;
+fi
+#下载文件包
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始从服务器获取安装文件！
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+tarurl=$url/bin/clashfm.tar.gz
+if command -v curl &> /dev/null; then
+	result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $tarurl)
+else $result
+	wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $tarurl
+	[ $? -eq 0 ] && result="200"
+fi
+[ "$result" != "200" ] && echo "文件下载失败！" && exit 1
+#解压
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始解压文件！
+mkdir -p $dir/clash > /dev/null
+tar -zxvf '/tmp/clashfm.tar.gz' -C $dir/clash/ > /dev/null
+[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+#初始化文件目录
+mv $dir/clash/clashservice /etc/init.d/clash #将clash服务文件移动到系统目录
+chmod  777 $dir/clash/clash  #授予权限
+chmod  777 /etc/init.d/clash #授予权限
+if [ ! -f "$dir/clash/mark" ]; then
+cat >$ccfg<<EOF
+#标识clash运行状态的文件，不明勿动！
+EOF
+fi
+sed -i '/versionsh_l=*/'d $dir/clash/mark
+sed -i "1i\versionsh_l=$versionsh" $dir/clash/mark
+#设置环境变量
+sed -i '/alias clash=*/'d /etc/profile
+echo "alias clash=\"sh $dir/clash/clash.sh\"" >> /etc/profile #设置快捷命令环境变量
+sed -i '/export clashdir=*/'d /etc/profile
+echo "export clashdir=\"$dir/clash\"" >> /etc/profile #设置clash路径环境变量
+#删除临时文件
+rm -rf /tmp/clashfm.tar.gz 
+#提示
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo clash for Miwifi 已经安装成功!
+echo -e "\033[33m直接输入\033[30;47m clash \033[0;33m命令即可管理！！！\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+

install_c.sh

@@ -0,0 +1,87 @@
+ #!/bin/sh
+# Copyright (C) Juewuy
+
+echo "***********************************************"
+echo "**                 欢迎使用                  **"
+echo "**             Clash for Miwifi              **"
+echo "**                             by  Juewuy    **"
+echo "***********************************************"
+
+url="https://juewuy.xyz/clash/"
+result=$(curl -w %{http_code} -skLo /tmp/clashversion $url/bin/version)
+[ "$result" != "200" ] && echo "无法连接到服务器！" && exit 1
+source /tmp/clashversion
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "~~~~版本：\033[32m$versionsh\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[44m使用中如遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo -e "\033[37m目前仅支持小米AX系列3款路由器"
+echo -e "\033[44m其余型号可到TG群报名参与测试\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[32m 1 在默认目录(/etc)安装Clash for Miwifi"
+echo -e "\033[33m 2 手动设置安装目录（不明勿用！）"
+echo -e "\033[0m 0 退出安装"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+read -p "请输入相应数字 > " num
+
+if [ -z $num ];then
+	echo 安装已取消
+	exit;
+elif [[ $num == 1 ]];then
+	dir=/etc
+elif [[ $num == 2 ]];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo '可用路径 剩余空间:'
+	df -h | awk '{print $6,$2}'| sed 1d 
+	echo '路径是必须带 / 的格式，写入虚拟内存(/tmp,/sys,..)的文件会在重启后消失！！！'
+	read -p "请输入自定义路径 > " dir
+	if [ -z $dir ];then
+		echo 路径错误！已取消安装！
+		exit;
+	fi
+else
+	echo 安装已取消
+	exit;
+fi
+#下载文件包
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始从服务器获取安装文件！
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+tarurl=$url/bin/clashfm.tar.gz
+if command -v curl &> /dev/null; then
+	result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $tarurl)
+else $result
+	wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $tarurl
+	[ $? -eq 0 ] && result="200"
+fi
+[ "$result" != "200" ] && echo "文件下载失败！" && exit 1
+#解压
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 开始解压文件！
+mkdir -p $dir/clash > /dev/null
+tar -zxvf '/tmp/clashfm.tar.gz' -C $dir/clash/ > /dev/null
+[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+#初始化文件目录
+mv $dir/clash/clashservice /etc/init.d/clash #将clash服务文件移动到系统目录
+chmod  777 $dir/clash/clash  #授予权限
+chmod  777 /etc/init.d/clash #授予权限
+if [ ! -f "$dir/clash/mark" ]; then
+cat >$ccfg<<EOF
+#标识clash运行状态的文件，不明勿动！
+EOF
+fi
+sed -i '/versionsh_l=*/'d $dir/clash/mark
+sed -i "1i\versionsh_l=$versionsh" $dir/clash/mark
+#设置环境变量
+sed -i '/alias clash=*/'d /etc/profile
+echo "alias clash=\"sh $dir/clash/clash.sh\"" >> /etc/profile #设置快捷命令环境变量
+sed -i '/export clashdir=*/'d /etc/profile
+echo "export clashdir=\"$dir/clash\"" >> /etc/profile #设置clash路径环境变量
+#删除临时文件
+rm -rf /tmp/clashfm.tar.gz 
+#提示
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo clash for Miwifi 已经安装成功!
+echo -e "\033[33m直接输入\033[30;47m clash \033[0;33m命令即可管理！！！\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+

scripts/clash.sh

@@ -0,0 +1,670 @@
+ #!/bin/sh
+# Copyright (C) Juewuy
+
+getconfig(){
+#版本号
+versionsh_l=0.8.7
+#服务器地址
+if [ -z $update_url ]; then
+	update_url=https://cdn.jsdelivr.net/gh/juewuy/clash-for-Miwifi/
+fi
+#文件路径
+if [ -z $clashdir ];then
+clashdir=$(dirname $(readlink -f "$0"))
+echo "export clashdir=\"$clashdir\"" >> /etc/profile
+fi
+ccfg=$clashdir/mark
+yaml=$clashdir/config.yaml
+#检查标识文件
+if [ ! -f "$ccfg" ]; then
+	echo mark文件不存在，正在创建！
+	cat >$ccfg<<EOF
+#标识clash运行状态的文件，不明勿动！
+EOF
+fi
+source $ccfg
+#获取自启状态
+if [ -f /etc/rc.d/*clash ]; then 
+	auto="\033[32m已设置开机启动！\033[0m"
+	auto1="\033[36m禁用\033[0mclash开机启动"
+else
+	auto="\033[31m未设置开机启动！\033[0m"
+	auto1="\033[36m允许\033[0mclash开机启动"
+fi
+#获取运行模式
+if [ ! -n "$redir_mod" ]; then
+	sed -i "2i\redir_mod=Redir模式" $ccfg
+	redir_mod=Redir模式
+fi
+#获取运行状态
+status=`ps |grep -w 'clash -d'|grep -v grep|wc -l`
+if [[ $status -gt 0 ]];then
+	run="\033[32m正在运行（$redir_mod）\033[0m"
+	uid=`ps |grep -w 'clash -d'|grep -v grep|awk '{print $1}'`
+	VmRSS=`cat /proc/$uid/status|grep -w VmRSS|awk '{print $2,$3}'`
+	#获取运行时长
+	if [ -n "$start_time" ]; then 
+		time=$((`date +%s`-$start_time))
+		day=$(($time/86400))
+		if [[ $day != 0 ]]; then 
+			day=$day天
+		else
+			day=""
+		fi
+		time=`date -u -d @${time} +"%-H小时%-M分%-S秒"`
+	fi
+else
+	run="\033[31m没有运行（$redir_mod）\033[0m"
+fi
+#输出状态
+
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;46m欢迎使用Clash for Miwifi！\033[0m"
+echo -e "Clash服务"$run"，"$auto""
+if [ $status -gt 0 ];then
+	echo -e "当前内存占用：\033[44m"$VmRSS"\033[0m，已运行：\033[46;30m"$day"\033[44;37m"$time"\033[0m"
+fi
+echo -e "我的博客：\033[36;4mjuewuy.xyz\033[0m，交流反馈群：\033[36;4mt.me/clashfm\033[0m"
+echo -----------------------------------------------
+#安装clash核心
+if [ ! -f $clashdir/clash ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m没有找到核心文件，请先下载clash核心！\033[0m"
+	source $clashdir/getdate.sh
+	getcore
+fi
+#安装GeoIP数据库
+if [ ! -f $clashdir/Country.mmdb ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m没有找到GeoIP数据库文件，请先下载数据库！\033[0m"
+	source $clashdir/getdate.sh
+	getgeo
+fi
+}
+clashstart(){
+
+/etc/init.d/clash start
+sleep 1
+status=`ps |grep -w 'clash -d'|grep -v grep|wc -l`
+	if [[ $status -gt 0 ]];then
+		host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[32mclash服务已启动！\033[0m"
+		echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
+		echo -e "也可以前往更新菜单安装本地Dashboard面板，连接更稳定！！！"
+		echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m 9999 \033[0m"
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31mclash服务启动失败！请检查配置文件！\033[0m"
+	fi
+}
+clashlink(){
+#获取订阅规则
+if [ ! -n "$rule_link" ]; then
+	sed -i '/rule_link=*/'d $ccfg
+	sed -i "4i\rule_link=1" $ccfg
+	rule_link=1
+fi
+#获取后端服务器地址
+if [ ! -n "$server_link" ]; then
+	sed -i '/server_link=*/'d $ccfg
+	sed -i "5i\server_link=1" $ccfg
+	server_link=1
+fi
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;47m 欢迎使用订阅功能！\033[0m"
+echo -----------------------------------------------
+echo -e " 1 输入\033[36m节点/订阅\033[0m链接"
+echo -e " 2 输入完整clash规则链接"
+echo -e " 3 选取\033[33m代理规则\033[0m模版"
+echo -e " 4 选择配置生成服务器"
+echo -e " 5 \033[36m还原\033[0m配置文件"
+echo -e " 6 \033[32m手动更新\033[0m订阅"
+echo -e " 7 设置自动更新（未完成）"
+echo -e " 0 返回上级菜单"
+read -p "请输入对应数字 > " num
+if [ -z $num ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	clashsh
+elif [[ $num == 1 ]];then
+	if [ -n "$Url" ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m检测到已记录的订阅链接：\033[0m"
+		echo -e "\033[4;32m$Url\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		read -p "清空链接/追加导入？[1/0] > " res
+		if [ "$res" = '1' ]; then
+			Url=""
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m链接已清空！\033[0m"
+		fi
+	fi
+	source $clashdir/getdate.sh
+	getlink
+  
+elif [[ $num == 2 ]];then
+	if [ -n "$Url" ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m检测到已记录的订阅链接：\033[0m"
+		echo -e "\033[4;32m$Url\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		read -p "清空链接/追加导入？[1/0] > " res
+		if [ "$res" = '1' ]; then
+			Url=""
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m链接已清空！\033[0m"
+		fi
+	fi
+	source $clashdir/getdate.sh
+	getlink2
+elif [[ $num == 3 ]];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+	echo 当前使用规则为：$rule_link
+	echo 1 ACL4SSR默认通用版（推荐）
+	echo 2 ACL4SSR精简全能版（推荐）
+	echo 3 ACL4SSR通用版去广告加强
+	echo 4 ACL4SSR精简版去广告加强
+	echo 5 ACL4SSR通用版无去广告
+	echo 0 返回上级菜单
+	read -p "请输入对应数字 > " num
+		if [ -z $num ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		clashlink
+		else
+			#将对应标记值写入mark
+			sed -i '/rule_link*/'d $ccfg
+			sed -i "4i\rule_link="$num"" $ccfg	
+			rule_link=$num
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
+			echo -e "\033[32m设置成功！返回上级菜单！\033[0m"
+			clashlink
+		fi
+elif [[ $num == 4 ]];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+	echo 当前使用后端为：$server_link
+	echo 1 subconverter-web.now.sh
+	echo 2 subconverter.herokuapp.com
+	echo 3 subcon.py6.pw
+	echo 4 api.dler.io
+	echo 5 api.wcc.best
+	echo 6 skapi.cool
+	echo 7 subconvert.dreamcloud.pw
+	echo 0 返回上级菜单
+	read -p "请输入对应数字 > " num
+    if [ -z $num ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		clashlink
+	else
+		if [[ $num == 0 ]];then
+		clashlink
+		fi
+		#将对应标记值写入mark
+		sed -i '/server_link*/'d $ccfg
+		sed -i "4i\server_link="$num"" $ccfg	
+		server_link=$num
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
+		echo -e "\033[32m设置成功！返回上级菜单！\033[0m"
+		clashlink
+	fi
+elif [[ $num == 5 ]];then
+	yamlbak=$yaml.bak
+	if [ ! -f "$yaml".bak ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m没有找到配置文件的备份！\033[0m"
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e 备份文件共有"\033[32m`wc -l < $yamlbak`\033[0m"行内容，当前文件共有"\033[32m`wc -l < $yaml`\033[0m"行内容
+		read -p "确认还原配置文件？此操作不可逆！[1/0] > " res
+		if [ "$res" = '1' ]; then
+			mv $yamlbak $yaml
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[32m配置文件已还原！请手动重启clash服务！\033[0m"
+		else 
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m操作已取消！返回上级菜单！\033[0m"
+		fi
+	fi
+	clashsh
+elif [[ $num == 6 ]];then
+	if [ ! -n "$Url" ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo 没有找到你的订阅链接！请先输入链接！
+		clashlink
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m当前系统记录的订阅链接为：\033[0m"
+		echo -e "\033[4;32m$Url\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		read -p "确认更新配置文件？[1/0] > " res
+		if [ "$res" = '1' ]; then
+			source $clashdir/getdate.sh
+			getyaml
+		fi
+			clashlink
+	fi
+elif [[ $num == 0 ]];then
+	clashsh
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	exit;
+fi
+}
+clashadv(){
+#获取设置默认显示
+if [ ! -n "$skip_cert" ]; then
+	skip_cert=已开启
+fi
+if [ ! -n "$common_ports" ]; then
+	common_ports=未开启
+fi
+if [ ! -n "$dns_mod" ]; then
+	dns_mod=redir_host
+fi
+if [ ! -n "$modify_yaml" ]; then
+	modify_yaml=未开启
+fi
+if [ ! -n "$ipv6_support" ]; then
+	ipv6_support=未开启
+fi
+#
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;47m欢迎使用高级模式菜单：\033[0m"
+echo -e "\033[33m修改配置后请手动重启clash服务！\033[0m"
+echo -----------------------------------------------
+echo -e " 1 切换Clash运行模式: 	\033[36m$redir_mod\033[0m"
+echo -e " 2 切换DNS运行模式：	\033[36m$dns_mod\033[0m"
+echo -e " 3 跳过本地证书验证：	\033[36m$skip_cert\033[0m   ————解决节点证书验证错误"
+echo -e " 4 只代理常用端口： 	\033[36m$common_ports\033[0m   ————用于屏蔽P2P流量"
+echo -e " 5 不修饰config.yaml:	\033[36m$modify_yaml\033[0m   ————用于使用自定义配置"
+echo -e " 6 启用ipv6支持:     	\033[36m$ipv6_support\033[0m   ————实验性且不兼容Fake_ip"
+echo -e " 9 \033[32m重启\033[0mclash服务"
+echo -e " 0 返回上级菜单 \033[0m"
+read -p "请输入对应数字 > " num
+if [[ $num -le 9 ]] > /dev/null 2>&1; then 
+	if [[ $num == 0 ]]; then
+		clashsh  
+	elif [[ $num == 1 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "当前代理模式为：\033[47;30m $redir_mod \033[0m；Clash核心为：\033[47;30m $clashcore \033[0m"
+		echo -e "\033[33m切换模式后需要手动重启clash服务以生效！\033[0m"
+		echo -e "\033[36mTun及混合模式必须使用clashpre核心！\033[0m"
+		echo -----------------------------------------------
+		echo " 1 Redir模式：CPU以及内存占用较低"
+		echo "              但不支持UDP流量转发"
+		echo "              日常使用推荐此模式"
+		echo " 2 Tun模式：  支持UDP转发且延迟低"
+		echo "              但CPU及内存占用更高"
+		echo "              且不支持redir-host"
+		echo " 3 混合模式： 仅使用Tun转发UPD流量"
+		echo "              CPU和内存占用较高"
+		echo "              不推荐使用redir-host"
+		echo " 0 返回上级菜单"
+		read -p "请输入对应数字 > " num	
+		if [ -z $num ]; then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			clashadv
+		elif [[ $num == 0 ]]; then
+			clashadv
+		elif [[ $num == 1 ]]; then
+			redir_mod=Redir模式
+		elif [[ $num == 2 ]]; then
+			if [ "$clashcore" = "clash" ] || [ "$clashcore" = "clashr" ];then
+				echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+				echo -e "\033[31m当前核心不支持开启Tun模式！请先切换clash核心！！！\033[0m"
+				clashadv
+			fi
+			redir_mod=Tun模式
+			dns_mod=fake-ip
+		elif [[ $num == 3 ]]; then
+			if [ "$clashcore" = "clash" ] || [ "$clashcore" = "clashr" ];then
+				echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+				echo -e "\033[31m当前核心不支持开启Tun模式！请先切换clash核心！！！\033[0m"
+				clashadv
+			fi
+			redir_mod=混合模式		
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			clashadv
+		fi
+		sed -i '/redir_mod*/'d $ccfg
+		sed -i "1i\redir_mod=$redir_mod" $ccfg
+		sed -i '/dns_mod*/'d $ccfg
+		sed -i "1i\dns_mod=$dns_mod" $ccfg
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	
+		echo -e "\033[36m已设为 $redir_mod ！！\033[0m"
+		clashadv
+	  
+	elif [[ $num == 2 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "当前DNS运行模式为：\033[47;30m $dns_mod \033[0m"
+		echo -e "\033[33m切换模式后需要手动重启clash服务以生效！\033[0m"
+		echo -----------------------------------------------
+		echo " 1 fake-ip模式：   响应速度更快"
+		echo "                   但可能和部分软件有冲突"
+		echo " 2 redir_host模式：使用稳定，兼容性好"
+		echo "                   不支持Tun模式"
+		echo " 0 返回上级菜单"
+		read -p "请输入对应数字 > " num
+		if [ -z $num ]; then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			clashadv
+		elif [[ $num == 0 ]]; then
+			clashadv
+		elif [[ $num == 1 ]]; then
+			dns_mod=fake-ip
+		elif [[ $num == 2 ]]; then
+			dns_mod=redir_host
+			redir_mod=Redir模式
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			clashadv
+		fi
+		sed -i '/dns_mod*/'d $ccfg
+		sed -i "1i\dns_mod=$dns_mod" $ccfg
+		sed -i '/redir_mod*/'d $ccfg
+		sed -i "1i\redir_mod=$redir_mod" $ccfg
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	
+		echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
+		clashadv
+	
+	elif [[ $num == 3 ]]; then	
+		sed -i '/skip_cert*/'d $ccfg
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		if [ "$skip_cert" = "未开启" ] > /dev/null 2>&1; then 
+			sed -i "1i\skip_cert=已开启" $ccfg
+			echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
+			skip_cert=已开启
+		else
+			/etc/init.d/clash enable
+			sed -i "1i\skip_cert=未开启" $ccfg
+			echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
+			skip_cert=未开启
+		fi
+		clashadv
+	
+	elif [[ $num == 4 ]]; then	
+		sed -i '/common_ports*/'d $ccfg
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		if [ "$common_ports" = "未开启" ] > /dev/null 2>&1; then 
+			sed -i "1i\common_ports=已开启" $ccfg
+			echo -e "\033[33m已设为仅代理（22,53,587,465,995,993,143,80,443）等常用端口！！\033[0m"
+			common_ports=已开启
+		else
+			/etc/init.d/clash enable
+			sed -i "1i\common_ports=未开启" $ccfg
+			echo -e "\033[33m已设为代理全部端口！！\033[0m"
+			common_ports=未开启
+		fi
+		clashadv  
+	
+	elif [[ $num == 5 ]]; then	
+		sed -i '/modify_yaml*/'d $ccfg
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		if [ "$modify_yaml" = "未开启" ] > /dev/null 2>&1; then 
+			sed -i "1i\modify_yaml=已开启" $ccfg
+			echo -e "\033[33m已设为使用用户完成自定义配置文件！！"
+			echo -e "\033[0m不明白原理的用户切勿随意开启此选项"
+			echo -e "\033[33m！！！必然会导致上不了网！！!\033[0m"
+			modify_yaml=已开启
+		else
+			/etc/init.d/clash enable
+			sed -i "1i\modify_yaml=未开启" $ccfg
+			echo -e "\033[32m已设为使用脚本内置规则管理config.yaml配置文件！！\033[0m"
+			modify_yaml=未开启
+		fi
+		clashadv  
+		
+	elif [[ $num == 6 ]]; then	
+		sed -i '/ipv6_support*/'d $ccfg
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		if [ "$ipv6_support" = "未开启" ] > /dev/null 2>&1; then 
+			sed -i "1i\ipv6_support=已开启" $ccfg
+			echo -e "\033[33m已开启对ipv6协议的支持！！\033[0m"
+			echo -e "Clash对ipv6的支持并不友好，如不能使用请静等修复！"
+			ipv6_support=已开启
+		else
+			/etc/init.d/clash enable
+			sed -i "1i\ipv6_support=未开启" $ccfg
+			echo -e "\033[32m已禁用对ipv6协议的支持！！\033[0m"
+			ipv6_support=未开启
+		fi
+		clashadv  
+	
+	elif [[ $num == 9 ]]; then	
+		if [ $status -gt 0 ];then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			/etc/init.d/clash stop
+			echo -e "\033[31mClash服务已停止！\033[0m"
+		fi
+		clashstart
+		clashsh
+	else
+		echo -e "\033[31m暂未支持的选项！\033[0m"
+		clashadv
+	fi
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	clashsh
+fi
+exit;
+}
+update(){
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;47m欢迎使用更新功能：\033[0m"
+echo -e "感谢：\033[32mClash \033[0m作者\033[36m Dreamacro\033[0m 项目地址：\033[32mhttps://github.com/Dreamacro/clash\033[0m"
+echo -e "感谢：\033[32mClashR \033[0m作者\033[36m BROBIRD\033[0m 项目地址：\033[32mhttps://github.com/BROBIRD/clash\033[0m"
+echo -e "感谢：\033[32m更多的帮助过我的人！\033[0m"
+echo -----------------------------------------------
+echo -e " 1 更新\033[36m管理脚本\033[0m"
+echo -e " 2 切换\033[33mclash核心\033[0m"
+echo -e " 3 更新\033[32mGeoIP数据库\033[0m"
+echo -e " 4 安装本地\033[35mDashboard\033[0m面板"
+echo -e " 8 切换\033[36m安装源\033[0m地址"
+echo -e " 9 \033[31m卸载\033[34mClash for Miwfi\033[0m"
+echo -e " 0 返回上级菜单" 
+read -p "请输入对应数字 > " num
+if [[ $num -le 9 ]] > /dev/null 2>&1; then 
+	if [[ $num == 0 ]]; then
+		clashsh
+	
+	elif [[ $num == 1 ]]; then	
+		source $clashdir/getdate.sh
+		getsh	
+	
+	elif [[ $num == 2 ]]; then	
+		source $clashdir/getdate.sh
+		getcore
+
+	elif [[ $num == 3 ]]; then	
+		source $clashdir/getdate.sh
+		getgeo
+	
+	elif [[ $num == 4 ]]; then	
+		source $clashdir/getdate.sh
+		getdb
+		
+	elif [[ $num == 8 ]]; then	
+		source $clashdir/getdate.sh
+		setserver
+		
+	elif [[ $num == 9 ]]; then
+		read -p "确认卸载clash？（警告：该操作不可逆！）[1/0] " res
+		if [ "$res" = '1' ]; then
+			/etc/init.d/clash disable
+			/etc/init.d/clash stop
+			rm -rf $clashdir
+			rm -rf /etc/init.d/clash
+			rm -rf /www/clash
+			rm -rf $csh
+			sed -i '/alias clash=*/'d /etc/profile
+			sed -i '/export clashdir=*/'d /etc/profile
+			echo 已卸载clash相关文件！
+		fi
+		echo -e "\033[31m操作已取消！\033[0m"
+		exit;
+	else
+		echo -e "\033[31m暂未支持的选项！\033[0m"
+		update
+	fi
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	clashsh
+fi
+exit;
+}
+clashsh(){
+#############################
+getconfig
+#############################
+echo -e " 1 \033[32m启动/重启\033[0mclash服务"
+echo -e " 2 clash\033[33m高级设置\033[0m"
+echo -e " 3 \033[31m停止\033[0mclash服务"
+echo -e " 4 $auto1"
+echo -e " 5 设置定时任务（施工中）"
+echo -e " 6 导入\033[32m节点/订阅\033[0m链接"
+echo -e " 8 \033[35m测试菜单\033[0m"
+echo -e " 9 \033[36m更新/卸载\033[0m"
+echo -e " 0 \033[0m退出脚本\033[0m"
+read -p "请输入对应数字 > " num
+if [[ $num -le 9 ]] > /dev/null 2>&1; then 
+	if [[ $num == 0 ]]; then
+		exit;
+  
+	elif [[ $num == 1 ]]; then
+		if [ ! -f "$yaml" ];then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m没有找到配置文件，请先导入节点/订阅链接！\033[0m"
+			clashlink
+		fi
+		if [ $status -gt 0 ];then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			/etc/init.d/clash stop > /dev/null 2>&1
+			echo -e "\033[31mClash服务已停止！\033[0m"
+		fi
+		clashstart
+		clashsh
+  
+	elif [[ $num == 2 ]]; then
+		clashadv
+
+	elif [[ $num == 3 ]]; then
+		/etc/init.d/clash stop > /dev/null 2>&1
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31mClash服务已停止！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		exit;
+
+	elif [[ $num == 4 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		if [ -f /etc/rc.d/*clash ]; then
+			/etc/init.d/clash disable
+			echo -e "\033[33m已禁止Clash开机启动！\033[0m"
+		else
+			/etc/init.d/clash enable
+			echo -e "\033[32m已设置Clash开机启动！\033[0m"
+		fi
+		clashsh
+
+	elif [[ $num == 5 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m正在施工中，敬请期待！\033[0m"
+		echo -e "\033[32m正在施工中，敬请期待！\033[0m"
+		echo -e "\033[33m正在施工中，敬请期待！\033[0m"
+		echo -e "\033[34m正在施工中，敬请期待！\033[0m"
+		echo -e "\033[35m正在施工中，敬请期待！\033[0m"
+		echo -e "\033[36m正在施工中，敬请期待！\033[0m"
+		clashsh
+    
+	elif [[ $num == 6 ]]; then
+		clashlink
+
+	elif [[ $num == 8 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[30;47m这里是测试命令菜单\033[0m"
+		echo -e "\033[33m如遇问题尽量运行相应命令后截图发群\033[0m"
+		echo -----------------------------------------------
+		echo " 1 查看clash运行时的报错信息"
+		echo " 2 查看系统DNS端口(:53)占用 "
+		echo " 3 测试ssl加密（aes-128-gcm）跑分"
+		echo " 4 查看iptables端口转发详情"
+		echo " 5 查看config.yaml前40行"
+		echo " 6 测试代理服务器连通性（google.tw)"
+		echo " 0 返回上级目录！"
+		read -p "请输入对应数字 > " num
+		if [ -z $num ]; then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			clashsh
+		elif [[ $num == 0 ]]; then
+			clashsh
+		elif [[ $num == 1 ]]; then
+			etc/init.d/clash stop
+			echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
+			$clashdir/clash -d $clashdir & { sleep 3 ; kill $! & }
+			echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
+			exit;
+		elif [[ $num == 2 ]]; then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			netstat -ntulp |grep 53
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			exit;
+		elif [[ $num == 3 ]]; then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			openssl speed -multi 4 -evp aes-128-gcm
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			exit;
+		elif [[ $num == 4 ]]; then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			iptables  -t nat  -L PREROUTING --line-numbers
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			exit;
+		elif [[ $num == 5 ]]; then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			sed -n '1,40p' $yaml
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			exit;
+		elif [[ $num == 6 ]]; then
+			echo 注意：测试结果不保证一定准确！
+			delay=`curl -kx 127.0.0.1:7890 -o /dev/null -s -w '%{time_starttransfer}' 'https://google.tw' & { sleep 3 ; kill $! & }` > /dev/null 2>&1
+			delay=`echo |awk "{print $delay*1000}"` > /dev/null 2>&1
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			if [ `echo ${#delay}` -gt 1 ];then
+				echo -e "\033[32m连接成功！响应时间为："$delay" ms\033[0m"
+			else
+				echo -e "\033[31m连接超时！请重试或检查节点配置！\033[0m"
+			fi
+			clashsh
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			clashsh
+		fi
+
+	elif [[ $num == 9 ]]; then
+		update
+	
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+	fi
+	exit 1
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+fi
+exit 1
+}
+clashsh

scripts/clashservice

@@ -0,0 +1,146 @@
+#!/bin/sh /etc/rc.common
+# Example script
+# Copyright (C) 2007 OpenWrt.org
+
+USE_PROCD=1
+START=99
+
+getconfig(){
+#开机加载环境变量保证找到文件路径
+source /etc/profile > /dev/null 2>&1
+ccfg=$clashdir/mark
+if [ ! -f "$ccfg" ]; then
+	echo mark文件不存在，默认以Redir模式运行！
+cat >$ccfg<<EOF
+#标识clash运行状态的文件，不明勿动！
+EOF
+	#指定一些默认状态
+	redir_mod=redir模式
+	common_ports=未开启
+	dns_mod=redir-host
+	modify_yaml=未开启
+	ipv6_support=未开启
+fi
+source $ccfg #加载配置文件
+#是否代理常用端口
+if [ "$common_ports" = "已开启" ];then
+	ports='-m multiport --dports 22,53,587,465,995,993,143,80,443 '
+fi
+#DNS模式
+if [ "$common_ports" = "已开启" ];then
+	ports='-m multiport --dports 22,53,587,465,995,993,143,80,443 '
+fi
+}
+modify_yaml(){
+##########需要变更的配置###########
+mix='mixed-port: 7890'
+redir='redir-port: 7892'
+lan='allow-lan: true'
+mode='mode: Rule'
+log='log-level: info'
+if [ "$ipv6_support" = "已开启" ];then
+ipv6='ipv6: true'
+else
+ipv6='ipv6: false'
+fi
+external='external-controller: 0.0.0.0:9999'
+if [ "$dns_mod" = "fake-ip" ];then
+dns='dns: {enable: true, listen: 0.0.0.0:1053, fake-ip-range: 198.18.0.1/16, enhanced-mode: fake-ip, nameserver: [114.114.114.114, 127.0.0.1:53], fallback: [tcp://1.0.0.1, 8.8.4.4]}'
+else
+dns='dns: {enable: true, ipv6: true, listen: 0.0.0.0:1053, enhanced-mode: redir-host, nameserver: [114.114.114.114, 127.0.0.1:53], fallback: [1.0.0.1, 8.8.4.4]}'
+fi
+if [ "$redir_mod" != "Redir模式" ];then
+tun='tun: {enable: true, stack: system}'
+else
+tun='tun: {enable: false}'
+fi 
+exper='experimental: {ignore-resolve-fail: true, interface-name: en0}'
+###################################
+	#预删除需要添加的项目
+	i=$(grep  -n  "^proxies:" $clashdir/config.yaml | head -1 | cut -d ":" -f 1)
+	i=$(($i-1))
+	sed -i '1,'$i'd' $clashdir/config.yaml
+	#添加配置
+	sed -i "1i$mix" $clashdir/config.yaml
+	sed -i "1a$redir" $clashdir/config.yaml
+	sed -i "2a$lan" $clashdir/config.yaml
+	sed -i "3a$mode" $clashdir/config.yaml
+	sed -i "4a$log" $clashdir/config.yaml
+	sed -i "5a$ipv6" $clashdir/config.yaml
+	sed -i "6a$external" $clashdir/config.yaml
+	sed -i "7a$dns" $clashdir/config.yaml
+	sed -i "8a$tun" $clashdir/config.yaml
+	sed -i "9a$exper" $clashdir/config.yaml
+	#跳过本地tls证书验证
+	if [ "$skip_cert" != "未开启" ];then
+	sed -i "10,99s/sni: \S*/\1skip-cert-verify: true}/" $clashdir/config.yaml  #跳过trojan本地证书验证
+	sed -i '10,99s/}}/}, skip-cert-verify: true}/' $clashdir/config.yaml  #跳过v2+ssl本地证书验证
+	fi
+	#sed -i '/rules:/a \ - DOMAIN-SUFFIX,clash.razord.top,🎯 全球直连' $clashdir/config.yaml
+}
+mark_time(){
+	start_time=`date +%s`
+	sed -i '/start_time*/'d $ccfg
+	sed -i "3i\start_time=$start_time" $ccfg
+}
+start_redir(){
+	#修改iptables规则使流量进入clash
+	iptables -t nat -N clash
+	iptables -t nat -A clash -d 0.0.0.0/8 -j RETURN
+	iptables -t nat -A clash -d 10.0.0.0/8 -j RETURN
+	iptables -t nat -A clash -d 127.0.0.0/8 -j RETURN
+	iptables -t nat -A clash -d 169.254.0.0/16 -j RETURN
+	iptables -t nat -A clash -d 172.16.0.0/12 -j RETURN
+	iptables -t nat -A clash -d 192.168.0.0/16 -j RETURN
+	iptables -t nat -A clash -d 224.0.0.0/4 -j RETURN
+	iptables -t nat -A clash -d 240.0.0.0/4 -j RETURN
+	iptables -t nat -A clash -p tcp $ports-j REDIRECT --to-ports 7892
+	iptables -t nat -A PREROUTING -p tcp -j clash
+	if [ "$ipv6_support" = "已开启" ];then
+		ip6tables -t nat -N clashv6
+		ip6tables -t nat -A clashv6 -p tcp $ports-j REDIRECT --to-ports 7892
+		ip6tables -t nat -A PREROUTING -p tcp -j clashv6
+	fi
+}
+stop_iptables(){
+    #重置iptables规则
+	iptables -t nat -D PREROUTING -p tcp -j clash > /dev/null 2>&1
+	iptables -t nat -F clash > /dev/null 2>&1
+	iptables -t nat -X clash > /dev/null 2>&1
+	iptables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
+	ip6tables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to 1053 > /dev/null 2>&1
+	ip6tables -t nat -D PREROUTING -p tcp -j clashv6 > /dev/null 2>&1
+	ip6tables -t nat -F clashv6 > /dev/null 2>&1
+	ip6tables -t nat -X clashv6 > /dev/null 2>&1
+}
+start_dns(){
+	#允许tun网卡接受流量
+	iptables -I FORWARD -o utun -j ACCEPT
+	#设置dns转发
+	iptables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to 1053
+	ip6tables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to 1053
+}
+start_service() {
+	getconfig
+	#使用内置规则强行覆盖config配置文件
+	if [ "$modify_yaml" != "已开启" ];then
+	modify_yaml
+	fi
+    #创建clash后台进程
+	procd_open_instance
+	procd_set_param respawn
+	procd_set_param stderr 1
+	procd_set_param stdout 1
+	procd_set_param command $clashdir/clash -d $clashdir
+	procd_close_instance
+	#修改iptables规则使流量进入clash
+	stop_iptables
+	start_dns
+	if [ "$redir_mod" != "Tun模式" ];then
+	start_redir
+	fi
+	mark_time
+}
+stop_service() {
+	stop_iptables
+}

scripts/getdate.sh

@@ -0,0 +1,483 @@
+#!/bin/sh
+# Copyright (C) Juewuy
+
+getyaml(){
+source $ccfg
+#前后端订阅服务器地址索引，可在此处添加！
+Server=`sed -n ""$server_link"p"<<EOF
+subconverter-web.now.sh
+subconverter.herokuapp.com
+subcon.py6.pw
+api.dler.io
+api.wcc.best
+skapi.cool
+subconvert.dreamcloud.pw
+EOF`
+Config=`sed -n ""$rule_link"p"<<EOF
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_MultiMode.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_AdblockPlus.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_Mini_AdblockPlus.ini
+https://raw.githubusercontent.com/ACL4SSR/ACL4SSR/master/Clash/config/ACL4SSR_Online_NoReject.ini
+EOF`
+#如果传来的是Url链接则合成Https链接，否则直接使用Https链接
+if [ -z $Https ];then
+	Https="https://$Server/sub?target=clashr&new_name=true&url=$Url&insert=false&config=$Config"
+	markhttp=1
+fi
+#
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 正在连接服务器获取配置文件…………链接地址为：
+echo -e "\033[4;32m$Https\033[0m"
+echo 可以手动复制该链接到浏览器打开并查看数据是否正常！
+echo -e "\033[36m~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
+echo -e "|                                             |"
+echo -e "|         需要一点时间，请耐心等待！          |"
+echo -e "|       \033[0m如长时间没有数据请用ctrl+c退出\033[36m        |"
+echo -e "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\033[0m"
+#获取在线yaml文件
+yamlnew=$yaml.new
+rm -rf $yamlnew > /dev/null 2>&1
+result=$(curl -w %{http_code} -kLo $yamlnew $Https)
+if [ "$result" != "200" ];then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m配置文件获取失败！\033[0m"
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo
+	if [ -z $markhttp ];then
+		exit;
+	else
+		read -p "是否更换后端地址后重试？[1/0] > " res
+		if [ "$res" = '1' ]; then
+			sed -i '/server_link=*/'d $ccfg
+			if [ "$server_link" = '7' ]; then
+				server_link=0
+			fi
+			server_link=$(($server_link + 1))
+			#echo $server_link
+			sed -i "1i\server_link=$server_link" $ccfg
+			getyaml
+		fi
+		exit;
+	fi
+else
+	if cat $yamlnew | grep ', server:' >/dev/null;then
+		#替换文件
+		if [ -f $yaml ];then
+			mv $yaml $yaml.bak
+		fi
+		mv $yamlnew $yaml
+		echo 配置文件已生成！正在重启clash使其生效！
+		#重启clash服务
+		/etc/init.d/clash restart
+		sleep 1
+		status=`ps |grep -w 'clash -d'|grep -v grep|wc -l`
+		if [[ $status -gt 0 ]];then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[32mclash服务已启动！\033[0m"
+			echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理clash内置规则"
+			host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
+			echo -e "Host地址:\033[30;46m $host \033[0m;端口:\033[30;46m 9999 \033[0m"
+			#将用户链接写入mark
+			sed -i '/Https=*/'d $ccfg
+			sed -i "7i\Https=\'$Https\'" $ccfg
+			clashsh
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			if [ -f $yaml.bak ];then
+				echo -e "\033[31mclash服务启动失败！已还原配置文件并重启clash！\033[0m"
+				mv $yaml.bak $yaml
+				/etc/init.d/clash start
+				clashsh
+			else
+				echo -e "\033[31mclash服务启动失败！请利用测试菜单排查问题！\033[0m"
+				clashsh
+			fi
+		fi
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m获取到了配置文件，但格式似乎不对！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		sed -n '1,20p' $yamlnew
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[33m请检查如上配置文件信息:\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	fi
+	exit;
+fi
+exit
+}
+getlink(){
+#设置输入循环
+i=1
+while [ $i -le 99 ]
+do
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[44m 遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+	echo -----------------------------------------------
+	echo -e "支持批量导入\033[30;46m Http/Https/Clash \033[0m等格式的订阅链接"
+	echo -e "支持批量导入\033[30;42m Vmess/SSR/SS/Trojan/Sock5 \033[0m等格式的节点链接"
+	echo -e "\033[31m使用SSR节点请务必使用支持SSR的clash核心！\033[0m"
+	echo -e "多个较短的链接可以用\033[30;47m | \033[0m分隔以一次性输入"
+	echo -e "多个较长的链接请尽量分多次输入，可支持多达\033[30;47m 99 \033[0;36m次输入"
+	echo -e "\033[32m直接输入回车以结束输入并开始导入链接！\033[0m"
+	echo -----------------------------------------------
+	echo -e "\033[33m 0 返回上级目录！\033[0m"
+	echo -----------------------------------------------
+	read -p "请输入第"$i"个链接 > " url
+	test=$(echo $url | grep "://")
+	url=`echo ${url/\ \(*\)/''}`   #删除恶心的超链接内容
+	url=`echo ${url/*\&url\=/""}`   #将clash完整链接还原成单一链接
+	url=`echo ${url/\&config\=*/""}`   #将clash完整链接还原成单一链接
+	url=`echo ${url//\&/\%26}`   #将分隔符 & 替换成urlcode：%26
+	if [[ "$test" != "" ]];then
+		if [[ -z $Url ]];then
+			Url="$url"
+		else
+			Url="$Url"\|"$url"
+		fi
+		i=$(($i+1))
+	elif [ -z $url ];then
+		if [ -n $Url ];then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e 请检查输入的链接是否正确：
+			echo -e "\033[4m$Url\033[0m"
+			read -p "确认导入配置文件？原配置文件将被更名为config.yaml.bak![1/0] > " res
+			if [ "$res" = '1' ]; then
+				#将用户链接写入mark
+				sed -i '/Url=*/'d $ccfg
+				sed -i '/Https=*/'d $ccfg
+				sed -i "6i\Url=\'$Url\'" $ccfg
+				#获取在线yaml文件
+				getyaml
+			fi
+			clashlink
+		fi
+	elif [[ $url == 0 ]];then
+		clashlink
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的订阅/分享链接！！！\033[0m"
+	fi
+done
+####
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo 输入太多啦，可能会导致订阅失败！
+echo "多个较短的链接请尽量用“|”分隔以一次性输入！"
+echo -e "请检查输入的链接是否正确：\033[4m$Url\033[0m"
+read -p "确认导入配置文件？原配置文件将被更名为config.bak![1/0] > " res
+if [ "$res" = '1' ]; then
+	#将用户链接写入mark
+	sed -i '/Url=*/'d $ccfg
+	sed -i '/Https=*/'d $ccfg
+	sed -i "6i\Url=\'$Url\'" $ccfg
+	#获取在线yaml文件
+	getyaml
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo 操作已取消！返回上级菜单！
+	clashlink
+fi
+	clashlink
+} 
+getlink2(){
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[44m 遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+echo -----------------------------------------------
+echo -e "\033[33m仅支持导入可直接在clash中使用的完整订阅链接"
+echo -e "\033[36m非完整链接请使用【导入节点/订阅链接】功能"
+echo -e "\033[31m注意如节点使用了chacha20加密协议，需将核心更新为clashr核心\033[0m"
+echo -----------------------------------------------
+echo -e "\033[33m0 返回上级目录！\033[0m"
+echo -----------------------------------------------
+read -p "请输入完整链接 > " Https
+test=$(echo $Https | grep "://")
+Https=`echo ${Https/\ \(*\)/''}`   #删除恶心的超链接内容
+#Https=`echo ${Https//\&/\%26}`   #将分隔符 & 替换成Httpscode：%26
+if [ -n $Https ];then
+	if [ -n $test ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e 请检查输入的链接是否正确：
+		echo -e "\033[4m$Https\033[0m"
+		read -p "确认导入配置文件？原配置文件将被更名为config.yaml.bak![1/0] > " res
+			if [ "$res" = '1' ]; then
+				#将用户链接写入mark
+				sed -i '/Url=*/'d $ccfg
+				sed -i '/Https=*/'d $ccfg
+				sed -i "6i\Https=\'$Https\'" $ccfg
+				#获取在线yaml文件
+				getyaml
+			fi
+			clashlink
+	fi
+elif [[ $Https == 0 ]];then
+	clashlink
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的链接地址！！！\033[0m"
+fi
+}
+getsh(){
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[33m正在检查更新！\033[0m"
+result=$(curl -w %{http_code} -skLo /tmp/clashversion $update_url/bin/version)
+[ "$result" != "200" ] && echo "检查更新失败！" && exit 1
+source /tmp/clashversion
+echo -----------------------------------------------
+echo -e "当前脚本版本为：\033[33m $versionsh_l \033[0m"
+echo -e "最新脚本版本为：\033[32m $versionsh \033[0m"
+echo -----------------------------------------------
+read -p "是否更新脚本？[1/0] > " res
+if [ "$res" = '1' ]; then
+	if command -v curl &> /dev/null; then
+		echo 正在获取更新文件
+		result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $update_url/bin/clashfm.tar.gz)
+	else $result
+		wget-ssl -q --no-check-certificate --tries=1 --timeout=10 -O /tmp/clashfm.tar.gz $tarurl
+		[ $? -eq 0 ] && result="200"
+	fi
+	[ "$result" != "200" ] && echo "文件下载失败！" && exit 1
+	#解压
+	echo -----------------------------------------------
+	echo 开始解压文件！
+	mkdir -p $clashdir > /dev/null
+	tar -zxvf '/tmp/clashfm.tar.gz' -C $clashdir/ > /dev/null
+	[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+	#初始化文件目录
+	mv $clashdir/clashservice /etc/init.d/clash #将clash服务文件移动到系统目录
+	chmod  777 $clashdir/clash  #授予权限
+	chmod  777 /etc/init.d/clash #授予权限
+
+	#删除临时文件
+	rm -rf /tmp/clashfm.tar.gz 
+	rm -rf /tmp/clashversion
+	#提示
+	echo -----------------------------------------------
+	echo -e "\033[32m管理脚本更新成功!\033[0m"
+	echo -----------------------------------------------
+	exit;
+else
+clashsh
+fi
+}
+getcore(){
+source $ccfg
+#获取核心及版本信息
+if [ ! -f $clashdir/clash ]; then
+	clashcore=没有安装核心！
+	clashv=''
+fi
+
+cpucore=armv7
+clashcore_n=$clashcore
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "当前clash核心：\033[47;30m $clashcore \033[46;30m$clashv\033[0m"
+echo -e "\033[32m请选择需要下载的核心版本！\033[0m"
+echo -----------------------------------------------
+echo "1 clash：     运行稳定，内存占用小"
+echo "(官方正式版)  不支持SSR，不支持Tun模式"
+echo
+echo "2 clashr：    稳定，内存占用小，支持SSR"
+echo "(clashR修改版)不支持Tun模式"
+echo
+echo "3 clashpre：  支持SSR，支持Tun模式"
+echo "(高级预览版)  内存占用高，不支持chacha20加密"
+echo -----------------------------------------------
+echo 0 返回上级菜单 
+read -p "请输入对应数字 > " num
+	if [ -z $num ]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		update
+	elif [[ $num == 0 ]]; then
+		update
+	elif [[ $num == 1 ]]; then
+		clashcore=clash
+	elif [[ $num == 2 ]]; then
+		clashcore=clashr
+	elif [[ $num == 3 ]]; then
+		clashcore=clashpre
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		update
+	fi
+#生成链接
+corelink="$update_url/bin/$clashcore/clash-linux-$cpucore"
+versionlink="$update_url/bin/$clashcore/version"
+#检测版本
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[33m正在检查更新！\033[0m"
+result=$(curl -w %{http_code} -skLo /tmp/clashversion $versionlink)
+[ "$result" != "200" ] && echo "检查更新失败！" && exit 1
+source /tmp/clashversion
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "当前clash核心：\033[0m $clashcore_n \033[33m$clashv\033[0m"
+echo -e "最新clash核心：\033[32m $clashcore \033[36m$version\033[0m"
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+read -p "是否更新？[1/0] > " res
+if [ "$res" = '1' ]; then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo 正在连接服务器获取clash核心文件…………链接地址为：
+	echo -e "\033[4;32m$corelink\033[0m"
+	echo 如无法正常下载可以手动复制到浏览器下载核心文件！
+	echo -e "\033[36m~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
+	echo -e "|                                             |"
+	echo -e "|         需要一点时间，请耐心等待！          |"
+	echo -e "|       \033[0m如长时间没有数据请用ctrl+c退出        |"
+	echo -e "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\033[0m"
+	#获取在线clash核心文件
+	result=$(curl -w %{http_code} -kLo /tmp/clash.new $corelink)
+	if [ "$result" != "200" ];then
+		echo -----------------------------------------------
+		echo -e "\033[31m核心文件下载失败！\033[0m"
+		echo -----------------------------------------------
+		getcore
+	else
+		echo -e "\033[32m$clashcore核心下载成功，正在替换！\033[0m"
+		mv /tmp/clash.new $clashdir/clash
+		chmod  777 $clashdir/clash  #授予权限
+		sed -i '/clashcore=*/'d $ccfg
+		sed -i "1i\clashcore=$clashcore" $ccfg
+		sed -i '/clashv=*/'d $ccfg
+		sed -i "1i\clashv=$version" $ccfg
+		rm -rf /tmp/clashversion
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[32m$clashcore核心替换成功，请手动启动clash服务！\033[0m"
+		clashsh
+	fi	
+else
+getcore
+fi			
+}
+getgeo(){
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;46m感谢Alecthw大神提供的优质GeoIP数据库！！！\033[0m"
+echo -----------------------------------------------
+echo -e "\033[33m请选择下载源：\033[0m"
+echo -e " 1 默认源：$update_url"
+echo -e " 2 Alecthw大神的Github(需开启clash服务)"
+echo -e " 0 返回上级菜单"
+read -p "请输入对应数字 > " num
+	if	[ -z $num ]; then 
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		update
+	elif [[ $num == 0 ]]; then
+		update
+	elif [[ $num == 1 ]]; then
+		geolink="$update_url/bin/Country.mmdb"
+		#echo $geolink
+	elif [[ $num == 2 ]]; then
+		geolink="-x 127.0.0.1:7890 https://raw.githubusercontent.com/alecthw/mmdb_china_ip_list/release/Country.mmdb"
+	else
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		update
+		exit;
+	fi
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo 正在从服务器获取数据库文件…………
+	result=$(curl -w %{http_code} -kLo $clashdir/Country.mmdb $geolink)
+	if [ "$result" != "200" ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m文件下载失败！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		getgeo
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[32mGeoIP数据库文件下载成功！\033[0m"
+			update
+	fi
+update
+}
+getdb(){
+host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[36m安装本地版dashboard管理面板\033[0m"
+echo -----------------------------------------------
+echo -e "\033[32m打开管理面板的速度更快且更稳定"
+echo -e "\033[33m需要占用约500kb的本地空间(目录：/www/clash)\033[0m"
+echo -e "\033[36m可以使用\033[32;4mhttp://$host/clash\033[0;36m访问面板\033[0m"
+echo -----------------------------------------------
+read -p "是否安装本地面板？[1/0] > " res
+if [ "$res" = '1' ]; then
+	if [ -d /www/clash ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m检测到您已经安装过本地面板了！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		read -p "是否覆盖安装？[1/0] > " res
+		if [ -z "$res" ]; then
+			update
+		elif [ "$res" = 1 ]; then
+			rm -rf /www/clash
+		else
+			update
+		fi
+	fi
+	dblink="$update_url/bin/clashdb.tar.gz"
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo 正在连接服务器获取安装文件…………
+	result=$(curl -w %{http_code} -kLo /tmp/clashdb.tar.gz $dblink)
+	if [ "$result" != "200" ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m文件下载失败！\033[0m"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		getdb
+	else
+		echo -e "\033[33m下载成功，正在解压文件！\033[0m"
+		mkdir -p /www/clash > /dev/null
+		tar -zxvf '/tmp/clashdb.tar.gz' -C /www/clash > /dev/null
+		[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+		echo -e "\033[32m面板安装成功！"
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[36m请使用\033[32;4mhttp://$host/clash\033[0;36m访问面板\033[0m"
+		rm -rf /tmp/clashdb.tar.gz
+		update
+	fi
+fi		
+update
+}
+setserver(){
+
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[30;47m您可以在此处切换在线更新时使用的资源地址\033[0m"
+echo -e "当前源：\033[4;32m$update_url\033[0m"
+echo -----------------------------------------------
+echo -e " 1 CDN源(感谢\033[4;32mwww.jsdelivr.com\033[0m，推荐)"
+echo -e " 2 Github源(不稳定，不推荐)"
+echo -e " 3 Github源+clash代理(需开启clash服务，推荐)"
+echo -e " 4 自定义输入(请务必确保路径正确)"
+echo -e " 0 返回上级菜单"
+read -p "请输入对应数字 > " num
+if	[ -z $num ]; then 
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	update
+elif [[ $num == 1 ]]; then
+	update_url="https://cdn.jsdelivr.net/gh/juewuy/clash-for-Miwifi"
+elif [[ $num == 9 ]]; then
+	update_url="https://juewuy.xyz/clash"
+elif [[ $num == 2 ]]; then
+	update_url="https://raw.githubusercontent.com/juewuy/clash-for-Miwifi/master"
+elif [[ $num == 3 ]]; then
+	update_url="-x 127.0.0.1:7890 https://raw.githubusercontent.com/juewuy/clash-for-Miwifi/master"
+elif [[ $num == 4 ]]; then
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	read -p "请输入个人源路径 > " update_url
+	if [ -n $update_url ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m取消输入，返回上级菜单！\033[0m"
+		update
+	fi
+else
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[31m请输入正确的数字！\033[0m"
+	update
+fi
+#写入mark文件
+sed -i '/update_url*/'d $ccfg
+sed -i "1i\update_url=\'$update_url\'" $ccfg
+echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+echo -e "\033[32m源地址更新成功！\033[0m"
+update
+}